Imovie not reading my external drive

Have a bunch of imovie events I dragged from iMac at work to my Lacie 1tb ext drive. Have connected it to my MBP for editing at home. IMovie recognizes the external drive but the events are not showing up under the drive symbol after opening it (arrow pointing down)
confused?
Help would be appreciated
thanks

I have uninstalled Crossover. Still no luck. Here is what I see:
After plugging in the drive:
Then I see this image while the drive is still visible as in image 1:
Followed by:
As you can see, it is like the drive just disappears. Judging from the time stamps on the Screen Shots, it takes the whole process about 32 seconds.
It shows up in the Disk Utility while it is connected before it gets booted:
I am at a loss for what to do. Thank you for all your help so far, though!

Similar Messages

  • HELP - FCPX does not read my external drive.

    The drive shows when first launching FCPX, but then the drive disappears from event and project lists when fully launched. I copied an empty Events (with new event) and Projects folders from my hard drive to the root of the media drive - the new event is found when FCPX is launched, but then the drive is dropped. I checked the formating, and it is os x extended journaled.
    How can I get this drive recognized by FCPX?
    My 2TB Drive shows in finder and is connected via firewire 800. This drive was previously used as my photo archive and "time machine" target drive (I moved these to another external drive). So, I know the drive is functional.

    Thank you, Tom. It was as though you were standing behind me and looking over my shoulder!
    I did indeed have a recently copied "Private" file from my camera on the root of this drive (and basically nothing else there). I renamed the folder - "x_private" and the drive with FCP folders were readable.
    Awesome Save - Thanks again!

  • How to move an iMovie project to an external drive ?

    Hi I need to move my iMovie project to an external drive, to free some space, please help. if it's possible.....

    To make sure that all required media is in the library contain the project you need to "Consolidate media"  see:  http://help.apple.com/imovie/mac/10.0/#mov882dee351
    You can then copy the library to your laptop with the Finder and open it with the same version of iMovie.  The last phrase is important since Apple has made changes in the project format several times even between minor updates of iMovie 10.  Earlier versions may not be able to read the library and later versions (not possible in this case) may cause the project to be updated so that it is no longer readable by the desktop version.   iMovie on the laptop will not at first find the copied library - you will have either to double click on it or File - Open library - Other and navigate to its location.
    Geoff.

  • Moving iMovie Projects to an external drive

    I cannot move iMovie projects to an external drive. I have followed the instructions. Help!

    If it doesn't recognize the drag, then there is something else awry. You should be able to force a move instead of a copy by holding down the cmd key. Can you just plain copy?
    If the destination does not become highlighted, the OS doesn't think it can accept the item for some reason.

  • If I back up iMovie projects to an external drive does it take the media with it? I want to free up space and remove pictures that were in iPhoto...that were used as media by iMovie when project was under way. In short I want archive iMovie stuff

    If I back up iMovie projects to an external drive does imovie  take the media with it? I want to free up space and remove pictures that were in iPhoto...that were used as media by iMovie when project was under way. In short I want archive iMovie stuff. If I pull pics out of iPhoto, and later want to drag an archived projet bac into iMovie and the pics are no longer in iPhoto, will I be able to keep working in the project in iMovie?

    Very likely not, as the iPhoto's can be used for something else.
    More like it took a copy, or it's referencing that spot on the drive in the editable files and most likely made a copy to create a new permanent export file.
    Sample one picture and a iMovie file and see what happens.

  • I am saving a video on iMovie directly to my external drive this video I'm saving is 4 hours long! when i click save nothing happens  can you please help?

    i am saving a video on iMovie directly to my external drive
    this video I'm saving is 4 hours long!
    when i click save nothing happens
    can you please help?

    Michael: are you still using an old version o0f PSE (e.g. PSE V4)? Problems similar to the one that you described are relatively frequent in old PSE Versions ( I was suffering a lot from them)..... and there are quite seldom in newer PSE versions.  Unfortunately, I do not remember which PSE Version became much better in this area (was it V5? or V6?)
    If using an older PSE version and encoutering often the problem: consider to migrate to a newer PSE Version..

  • How do I Retrieve imovie projects from and external drive back into my mac internal drive

    How do I Retrieve imovie projects from and external drive back into my mac internal drive?
    Thank You

    Every working drive, Internal or External, should produce an Icon on your Desktop. If you cannot see those, click on the Desktop (to get Finder) and choose Preferences off the Finder Menu. The general pane has checkboxes for "Show these items on the Desktop:"
    Double click the Icon for your External Drive to open it. Open the folders on it until you find the Items you want to copy. Drag them to the Icon of your Internal Drive, or open the folder where you want them to land and drop them in there.
    A drive that does not appear on the desktop after you have asked it to may be damaged. But it would be smart to do a Restart to see if it is recognized again at next Startup.

  • MBA no longer reads the external drive - can anyone help?

    Hi
    My MBA no longer reads the external iOmega HD. I use the iOmega to store all my files and for the TimeMachine.
    My old Powerbook G4 continues can read it so it's not a problem with the external drive. Also, the MBA can read another external drive that I have. So the problem is specific to this MBA and iOmega drive. I suspect, but am not sure that the problem is due to a recent system update.
    Can anyone figure what went wrong?
    Thanks.

    is the drive's firmware up to date?
    is the drive being powered from the usb port? perhaps it is just on the limit of the power the mba can supply, can you try it with an external power supply?

  • I have an iMac about a year old. It has OSX 10.8.3 with iMovie 9.0.8. Is there a way to get iMovie to store and use iMovie Events on an external drive? Raw video is eating up my 1TB internal drive.

    I have an iMac about a year old. It has OSX 10.8.3 with iMovie 9.0.8. Is there a way to get iMovie to store and use iMovie Events on an external drive? Raw video is eating up my 1TB internal drive.

    Yes, you can import to an external drive by choosing it from the Import Screen.
    Once an Event or Project is in iMovie, it is best to move it to the external using iMovie, so the Project does not lose links to the Event.
    For full instructions on how to do this, see this link.
    https://discussions.apple.com/docs/DOC-4141

  • Moving iPhoto, Photo Booth, & iMovie library to an external drive

    I've search through most of the support community and still havent found a concrete answer. Like most my current internal harddrive is about full. Mostly filled with photos and movies. I have a external harddrive that Time Machine is enabled. I also backed u my iphoto & photo booth library to the external drive. I have yet to move over any imovie data until I am sure that process will work.
    How do I move all data over so that iphoto, photo booth, & imovie can be ran fom my external harddrive. Also how can I ensure that imovie will direct itself to the iphoto library on my external because all movies from the past use the iphoto library as its directory. Once this is done I would like to delete all previous data off of my nternal drive
    Thank you

    . I have a external harddrive that Time Machine is enabled. I also backed u my iphoto & photo booth library to the external drive. I have yet to move over any imovie data until I am sure that process will work.
    Do you want to store your movies and photos on your Time Machine drive? That is not recommended, since you will not have a backup, if the media are only on your backup volume. You will need a second drive in addition to your backup drive, and this drive needs to be formatted MacOS Extended (Journaled), otherwise you cannot store photo libraries (iPhoto, Aperture) or iMovie events on that drive, see:  Format external drives to Mac OS Extended before using with Aperture (remember, thta formatting erases a drive, you have to save any contents to another drive before formatting).
    For iPhoto:  Once your external drive has the correct file system, simply select your iPhoto library in the Finder and drag it to that drive. Then double click the copied library to open it in iPhoto.
    For iMovie: To move your iMovie events to an external drive, use the event browser in iMovie - don't use the Finder! 
    See this Help page:  Copy or move video from your Event Library to an external ... http://support.apple.com/kb/ph2302
    I don't use Photo Booth, so I do not know how to move your Photo Booth photos.
    Regards
    Léonie

  • MacBook Air not reading USB Super Drive

    My new MacBook Air is not reading the external USB Super Drive

    I noticed you said "drive", and not disks. You do know that nothing happens until you load a disk into the drive, right?

  • Will all my files be saved on my Mac after I upgrade? Because I do not have an external drive.

    Will all my files be saved on my Mac when I upgrade? Because I do not have an external drive.

    Upgrading should not damage your content, however, it is strongly recommended that you make a current backup on an external drive just in case something goes wrong.  I have never had to use a restore but always have a backup just in case.

  • HT1338 My macbook pro(2010) is not reading the hard drive, but the hard drive works through the USB?

    Hi everyone,
         My Macbook pro(2010) is not reading the internal Hard Drive. At first I thought it to be a hard drive gone bad, so i bought a new hard drive. My macbook is still not reading the Hard Drive. I am able to use the original hard drive through a external(USB) connection. Also, when the macbook turns, there is a redelling sound. Can anyone offer me any suggestions to what the problem might be?   

    It sounds like the internal cable connecting the HDD to the logic board is improperly connected or faulty.  An appointment at an Apple genius bar might be a good option.  The repair should not be too expensive.
    Ciao.

  • Archiving iMovie 7.1 on external drives

    I am digitizing old family movies via iMovie (7.1) that is housed on my MacBook Pro laptop (10.4.11). To save hard drive space I would like to archive these and others movies on a 500 GB external drive, and THEN erase them from my laptop drive. I want to make sure I am doing things right before I get too far into the project.
    Can I just move the iMovie Projects to the external drive, or do I also need to move the iMovie Projects AND Events over. Do I need to install the iMovie software package in the external drive as well?
    If there is an easier ot more efficient way of doing this kind of work, I'd welcome all suggestions
    Thanks,
    EW

    The external drive MUST be formatted as Mac OS Extended (Journaled) and MUST be connected by firewire.
    Keep the application on your startup drive, but the projects can reside on the external drive, subject to the above.
    Make doubly sure everything works before deleting the originals!

  • ITunes are not seeing my external drive as the library

    Hi, I'm struggling to get music on my iPhone.
    All our music is stored on an external hard drive that we use with our iPods. My wife and I recently got iPhones and we're trying to put some music on them.
    iTunes is setup to get the music from the hard drive but for some reason I can not access it any more. My problem is that iTunes are not seeing my external drive as the library.
    Here's how I've set my iTunes up:
    Edit - Preferences - Advance
    iTunes media folder location: J:\Lacie_iTunes (that's where the music is stored)
    Now this worked perfect with our iPods but for some reason iTunes is not seeing the music anymore.
    In iTunes, if I click on Library and then Music all I get is a screen to either download music (with tutorials) or import CD's (with tutorials).
    I'm using iTunes 9 and Windows 7, the iTunes version on my wife's laptop is an older version but I do not think that that is the problem.
    Any advice would be MUCH appreciated!

    Setting the iTunes Media folder in preferences only moves the content to the external drive. The library database files will still be at the default location of ...\My Documents\My Music\iTunes. When you move the portable drive from one machine to the other you'll have access to the content, but not the database hence you get an empty library and the prompt to add some content.
    See this recent post for pointers on how to rearrange the database & media folders so that everything is truly portable. I don't have time just now to rewrite the instructions for your specific drive & folder names but if it's not clear I'll pop by later and write them out again.
    tt2

Maybe you are looking for

  • Sample application WMADemo

    Hi i was going through the sample application provided in the Sun's wireless toolkit 2.2 named WMADemo. There is a midlet class in it named SMSReceive.java. The code in its startApp() function is public void startApp() { /** SMS connection to be read

  • Retraction cost center plan data from BPC to ECC

    HI Experts, We are integrating BW-BPC. The client wants to Retract the data from BPC to ECC System for reporting purposes. u201CIn order to be able to calculate standard costs correctly in production plants planning data from BPC is needed in SAP ECC

  • Im paying for cc but it will only let me down load cs4 or cs6 versions of the programs. help?

    I recently had trouble when opening Creative cloud to update Photoshop, illustrator..etc. Every time i went to open it it gave me an error message so i uninstalled cc. I  went threw the adobe chat support to reinstall cc, the guy sent me a link to do

  • Cannot download AES 4.5 fopr Flash Builder CS6 version 4.6

    I have Adobe Flash Builder CS6 version 4.6 on my Mac and it start and run fine I try to download plug in for it from the Help-Software Update menu. Most plug ins were successfully downloaded and installed, except one from Adobe I come across an error

  • I have lost my iTunes Library...AGAIN! Help please!!

    I have lost my library several times now. Each time this has happened I get the message "The "iTunesLibrary.itl" does not appear to be a valid music library file. iTunes has created a new music library and renamed this file to "iTunesLibrary(damaged)