IMovie not Task Finishing API compliant?

Created a movie in iMovie for iPhone 4. Started the export process. Progress bar is about halfway. Double-click Home button. Taskbar appears. I select Safari, browse around for a bit. Double-click Home button again. Select iMovie from the Taskbar. Progress bar progress gone, back to the beginning.
It finished exporting, however, even though I never saw the progress bar reach the end. My theory is the progress bar resets each time but it's actually progressing. So, maybe just a visual glitch, where the program forgets to keep the progress bar in the last state before switching apps?

Hi Sabari,
A) Verify if c$ Admin share is enabled
1. Enable administrative share for C$ (Please check with your System Admin to do this or See Microsoft document http://support.microsoft.com/kb/314984)
2. Check that it is ok:
- net use \\<hostname>\c$ should work
- the current user (i.e. user in administrator group) should have all privileges on the default share
3. Retry the installation
4. Remove the administrative share again
B) Check if Windows services "OracleRemExecService" is running
Check if Windows services "OracleRemExecService" is running and if its running then follow below documentaion
Note 1580119.1 Installation On the Same Windows x64 (64-bit) Server Of Oracle12c Release 1 Client(32-bit Or 64-bit) Failed: "[INS-30131] Initial Setup Required For The Execution Of Iinstaller Validations Failed"
C) Check if Windows Service “Server” is not running
Check if Windows Service “Server” is started on the system , if not started then start it as mentioned in below documentation
Note ID 1610775.1 Oracle Database/Client installation results in “INS-30131 ….validations failed” on windows 7
And here is the master note for installation issues on 12c
Master Note For Oracle Database 12c Release 1 (12.1) Database/Client Installation/Upgrade/Migration Standalone Environment (Non-RAC) (Doc ID 1520299.1)
Hope this helps.
Thank,
Prameela

Similar Messages

Human Task Java API

Hi
I have a requirement to create human tasks without using soa. I am trying to use the Human task Java API. Using this API I can do all the operations like updating the outcome, adding/updating comments and updating assignee list but not able to create initial task. I am using initiateTask operation which requires task definition id. I dont know how to set this. Can anybody guide me
1. Can I create human tasks without using composite pure java api?
2. If I am able to create initial task what will be the task definition id? I tried to enter a new row in soa infra meta data table which did not work.
I really appreciate the help.
Thanks

Hi Sri
I have few Processes deployed to my SOA Domain and that too under different Partitions. For ease of maintenance, in EM Console under soa_infra node instead of default partition we can have our own Partitions also to deploy specific workflow projects under those partitions. If you don't have this thats ok.
I looked at Payload data for all the Tasks submitted by the first Initiator Task in EM Console, when we check the Flow Trace etc. Here is what I found for <taskDefinitionId> value for each of my different Processes. They do have some Pattern. So you had to use some sort of properties file to get these values so that if they are deployed to different partitions and with different versions, you do not have to modify your java code and recompile it. Just modify .properties file.
Anyhow, looks like the format for <taskDefinitionId> is something like this:
NameOfPartition + "/" + NameOfProcess + "!" + VersionNumber + "/" + NameOfInitiatorHumanTask
Here are some examples from my domain for some of the Process.
<taskDefinitionId>default/SalesQuoteProcess!1.0/EnterQuote</taskDefinitionId>
<taskDefinitionId>Ravi1_Partition/CreditReviewRequestProcess!1.0/HumanTaskCreditRequestor1</taskDefinitionId>
<taskDefinitionId>Jegga1_Partition/HolidayProcess!1.0/StartNewHolidayTask</taskDefinitionId>
You already tried hardcoding it I guess and it worked. Now try generating them dynamically using simple String appenders and sort of properties file to make it more dynamic. How often do we really change partition name or human task name itself or name of process itself. They are pretty much fixed. Now comes only the Version number. This can change with your new deployment if you want to have different version. So just read all these from .properties file.
Thanks
Ravi Jegga

Completion percentage - If my Status date Task finish date & applied completion percentage 100% = ? New finish date for the task?

Hi and sorry for the title but it well summarize my question.
In fact I applied a completion percentage of 25% on a task with a finish date inferior to the entered status date.
MS Project only modified the Act. work of the task but not its finish date.
Is it a normal behaviour?
Thanks a lot for help
Paul

Paul --
To answer your question, yes, what you are seeing is normal behavior. If you want Microsoft Project 2010 or 2013 to automatically adjust the Finish date based on the Status Date, you will need to do the following:
Click File > Options > Advanced.
In the Calculation Options section of the Advanced page, select the option named Move Start of Remaining Parts Before Status Date Forward to Status Date.
Click the OK button.
If you select this option and enter task progress as you described in your question, Microsoft Project will force a task split, moving the uncompleted part of the task to start immediately after the Status date. In the same Calculation Options section
of the Advanced page of the Project Options dialog, you might also want to select the option named And Move End of Completed Parts Forward to Status Date. With this option selected in addition to the one mentioned in step #2 above, Microsoft Project
will move the completed portion of the task to the Status Date so that you do not see a task split at all.
Whether you use one or both of these options would be entirely up to you, based on what you want to see in the software. Neither is perfect, but I think one or both of these would give you the automatic scheduling that you seek. Hope this helps.
Dale A. Howard [MVP]

IMovie Workflow Tasks for Automator

Are there any iMovie workflow tasks available from Automator? When I bring up Automator, iMovie does not appear in the list of applications, although other iLife applications DO, such as iTunes, iPhoto, and iDVD.
What I would like to do is create a workflow that will take an iMovie project, and then simply export it in the three formats I use most often. When I do a video project, I will export it to a DVD, export it to iWeb, and export it as an iPod movie.
Has anyone done this? Or do I need to rely on AppleScript?

Bad news, I'm afraid.
Unfortunately iMovie (or at least iMovie HD, don't know about iMovie 6) is not AppleScriptable. That's (more or less) why there aren't any Automator actions for it.
It might be possible to use "UI Scripting" (sending AppleScript commands to iMovie's menu items and buttons) but it's not guaranteed to work and you'd need to know a fair bit about AppleScript to have much hope.
Sorry not to be able to help more.
H

Can I use Icloud to outlook sync only for calendar and contacts (not tasks)?

I starting using Icloud Sync wiht outlok 2010 and like it - howeve rI only want to sync my Calendar and Contacts not Tasks - is that possible?

No. It's all or nothing.

Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
Many thanks.

IBooks in ios6 does not open. I get a message saying, the operation could not be finished.(cocoa error 513). What do I do?

Since upgrading to iOS 6 I am getting this message when
I try to open iBooks. This operation could not be finished. ( Cocoa error 513)
I have deleted and re- installed iBooks several times. How do I get iBooks to work?

I was just on the phone with an Apple Engineer and we had to do a system restore. Once this was done the ibooks were able to download successfully. Apple did not know of the cocoa error 513.
all is working perfect after completely doing a backup and system restore.
Jeri Hardin
Operations Compliance for BP Oil

Reassigning of task using API in OIM11g

HI Folks,
Can someone help me how to reassign task using API in OIM 11g?
The request is created and assigned the task to xelsysadm by default.
I want the task be reassigned to approvers group by retrieving all the pending task of xelsysadm.
The issue here is tcRequestOperations is no longers works in 11g.
I checked the RequestService API , it doesnt have a method of reassigning task.
Are there any ways aside from using API?
Hope you guys can help me here.
thanks,

You'll have to use SOA APIs for the same.

Error: Previous downloads were not completely finished: Termination

Hi,
when replicating an condition adapter object i get a mapping error in SMW01 with detail text:
Previous downloads were not completely finished: Termination
Error when carrying out initial download
The adapter object was definitly downloaded some month ago with a green light in R3AM1
and not changed since then
Now it gets stuck
Someone can help what to do?
Thanks

Hello Norbert,
Please see note 661881.There could be an incorrect entry in table "CND_MAPC_INF_DNL" for the object. Please delete the object from this table and reload again.
Thanks,
Rohit

DataPackage1:arrived in BW, Processing 2nd processing step not yet finished

Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!
Holger

Hi!
Many thanks for your response.
The tcode WE05 on source system showing the following:
Inbox IDoc's: RSQRST (amount: 1)
Outbound IDoc's: RSINFO (amount: 4)
When I go to SAP BW System (tcode WE05) i cannot detect any Inbound IDOC's of message type RSINFO.
What is wrong in my configuration?
Thank you very much!

How to check whether a Document in KM is classified or not using JAVA API

Hello Everyone,
Can anyone tell me, How to check whether a Document in KM is classified or not, using JAVA API's??
Thanks & Regards,
Adren D'Souza

Hi,
The code is as follows:
IIndexService indexService = null;
try {
   indexService = (IIndexService) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.INDEX_SERVICE);
} catch (ResourceException e) {
   if (indexService == null) {
     log.errorT("Error on instanciating the index service");
     return this.renderMessage(this.getBundleString(RES_NO_INDEX_SERVICE), StatusType.ERROR);
// get index
IIndex index = null;
try {
   index = indexService.getIndex("YourIndexID");
} catch (WcmException e1) {
   log.errorT("Error when trying to get the index");
   return this.renderMessage(this.getBundleString(RES_NO_INDEX), StatusType.ERROR);
// check if the index is a instance of AbstractClassificationIndex
AbstractClassificationIndex classiIndex = null;
if (index instanceof AbstractClassificationIndex) {
   classiIndex = (AbstractClassificationIndex) index;
} else {
   log.errorT("The index " + index.getIndexName() + " is no classification index");
   return this.renderMessage(this.getBundleString(RES_NO_CLASSIFICATION_INDEX), StatusType.WARNING);
//give your KM Resource here for which you want to know if it is classified or not
boolean classified = classiIndex.isDocClassifiedInAnyTax(resource);
Regards,
Praveen Gudapati

Processing in imovie, not enough room in heap zone error

Hello, I am trying to process a 90 minute movie in imovie. I would like to process it in regular format and not high definition. Or if I have to process in high def, how do I create more space in my heap zone. The erroor message was processing in imovie, not enough room in heap zone error

I've never set it up since I purchased the computer. Time Machine is off. I'm extremely frustrated. I've tried to export to every possible place and I've tried to share to every option.

Sounds Conveted to AU or wav in Imovie. not accepted in java

i use iMovie sometimes to convert sounds becuase its possible.
but for example i convert to AU Mulaw, 8000rate, MOno.. and it doesnt work
but other sample AU sounds that i got in the web do work.
does imovie not encode correctly?
i have imovie 6

Hallo
I guess you use PersonalJava (SDK 1.1.8)? For this there's no "official" way to play audio in applications. The only way to integrate sound was to use the AppletContext (like you did it, but the interface is implemented by the browser).
I found a link that describes a workaround. Look at this:
http://www.javaworld.com/javaworld/javatips/jw-javatip24.html
It worked on my PC and om my SIMpad with HPC 2000 and Jeode VM.
Yours
Michael

Why is iMovie not opening my project ever since I shared it to iTunes

why is iMovie not opening my project ever since I shared it to iTunes

I shared a project to iTunes and reopened it in iMovie without a problem. The yellow exclamation sign shows, but I am able to update the project - almost. I encountered a new situation. I was able to insert new music, title slides and a video. However, it would not read the photo I inserted. I have not moved my project or consolidated it.

Error: Could not find DI API version 8.8 PL17 or higher.

Hello,
I'm trying to install the integration component to SAP B1 8.8 PL 14, and halfway through it's giving me the following error,
"Could not find DI API version 8.8 PL 17 or higher"
I was wondering, how do I find the Patch Level 17 for the DI API?
PS. I tried doing what it says in the installation guide, but it didn't help update me to the required version --> "To install the latest di api version, in the select components window of the sap b1 di api installshield wizard, deselect the di api previous versions checkbox"

Thanks Eddy,
I installed patch level SAP B1 PL18, and was able to get the version of DI API they were requesting. Now, when I'm in step 3/5 of the event sender, I get the following error when I click "test connection":
"Servlet B1iXcellerator is not available"
how do I go about correcting this?

IMovie not Task Finishing API compliant?

Similar Messages

Maybe you are looking for