Imovie on ipad 2 goes slow with ipod classic videos

I imported videos from my ipod classic to my ipad 2 with itunes. I can see my videos and create project but Imovie goes very slowly. Is it normal?
Thx

Up

Similar Messages

  • My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.

    My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
    The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Problems in compatibility of iPod radio remote with iPod classic 160 GB

    Hi all,
    I have just bought a iPod classic 160 GB and want to buy a iPod radio remote as well. However, after I have done my research, I find the radio remote is not compatible with iPod classic perfectly…
    Do you think it is a good idea for me to wait a new radio remote (maybe) or later Apple will release update?
    Thanks

    I use my Radio Remote with a Classic; it does everything that it had with my 5G-Video EXCEPT it will not allow me to set radio stations, either with the Radio Remote's control or the iPod's control.
    I have spoken with an iPod specialist (Apple Care) and according to him Apple has acknowleged less than 100% compatibility/functionality with the Radio Remote and the Classics. One of the reasons, he stated, was that several 5G-Video iPods were "getting fried" when the Remote was not fully connected to the docking-port. So Apple has decided to reengineer the port [for better a connection, I gather]. What puzzles me the most about the new generation of iPods is why they were rolled out without warning customers that their Car-Charger, Video Player, dock, AV Cable, or APPLE'S OWN Remote will not play nice with each other!
    This go around, it's find out the hard way.

  • Used wrong charger with ipod classic, now it wont turn on, displays the low battery icon even though its connected to the wright adapter

    used wrong charger with ipod classic, now it wont turn on, displays the low battery icon even though its connected to the wright adapter.
    Can anyone help ?
    please?

    WHow long have you left it to charge?  Have you tried resetting it after a short period of time to see if that can help jumpstart the charging process? To do this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Does the iPad get slower with time?

    i have an iPad 4 for over a year. Does the iPad get slower with the passage of time or because of small amount of available?

    As with any piece of electronics, the more stuff you get on there, the more clutter and the more 'junk' (not meaning offensively, just junk as extra files, fragmented files, etc) that it has to run through.
    If you think it's getting too slow, you can fully back it up, then reset your iPad back to factory settings (erase all content and settings) and then restore from that backup.
    It's not impossible, just something to do carefully because if you haven't backed everything up correctly, you will lose it. (content and apps from iTunes can always be redownloaded but content made on your iPad can be deleted if not backed up)
    I've had my iPad 2 for almost three years now and really haven't noticed a major decline in function. So unless you see something drastic, I really wouldn't worry about it.

  • Ios 7 not compatible with Ipod classic

    Ever since Itunes updated to IOS7 my Ipod classic that has been completely reliable for about four years is now unable to sync. I get a wide variety of responces from itunes while trying. It says the disc is not located, compatable, or sometimes it pretends to sync but only about 20 songs out of my 8,000+ songs were synced. I've tried everything from restoring (about 8 times total), trying to fix any bugs through my windows7 on the device, and only attempting to put on certain playlists- only to have the same results.
    I do hope that the Apple people know of this problem and are trying to resolve it because I would be very irritated to find that I can no longer use my Ipod. (its 160 gig)
    -If you know of anything that could help, I would greatly appreciate it.

    iOS has nothing to do with the iPod Classic, it is used on the iPod Touch and iPhone.
    Your Classic uses firmware (the operating system) 1.1.2. Nothing whatsoever to do with iOS.
    I suggest you have a browse through the Classic discussions and iTunes discussions for anything concerning problems with iPod Classic syncing, as I have noticed a few posts on that topic. I have not experienced any issues myself with my iPod Classic, running 1.1.2 for PC.
    Since there has been no update to the iPod Classic's firmware (operating system) for quite a while, the problems that I have noticed in the discussions, that mention partial Playlist syncing, additional songs not being synced etc. are more likely to be associated with updates to iTunes, which is now on version 11.1.38.

  • Backup iPod Classic (video)

    I manage my music manually, as I use different computers to upload music (mostly CDs) to my iPod Classic (video). This means that the music on my iPod Classic is much more than on either of the computers. How can I back up my iPod Classic (without syncing!) to preserve its contents?

    Its possible that the LCD display's ribbon cable was not properly attached to the iPod's logic board or was damaged upon replacement.  I would take the iPod back to wherever you had it serviced and explain to them what is happening.
    B-rock

  • Itunes 10.6.1.7 will not sync with ipod classic.  When is Apple going to fix this!!!!

    After upgrading to the latest version of iTunes - 10.6.1.7      my iPod classic is not recognized and I cannot sync it.
    The iPod does appear as a drive on my computer (with Windows XP).  The screen message syas the ipod is corrupted.  Did a disk check on ipod in disk mode and tried again.  No success.
    I've gone through the steps for troubleshooting;
    It worked fine before I upgraded iTunes and I'm at a loss on how to fix this.

    Try the steps listed on the linked pages in the answer below you up to the restore part. If it looks good, trying doing a System Restore in Windows XP to the day before you upgraded it, reverting it back to the older version of i-tunes. But, if something in the previous steps points to a hard drive issue, this won't help you.
    Regards,
    Brian

  • ITunes won't sync with iPod Classic

    Hi Helpful people,
    Sorry to ask the same question as a lot of others but nothing seems to be working.
    I have a 60GB iPod classic and I'm running iTunes 10.6.1.7
    iTunes detects my iPod device.
    In the iPod summary I have open iTunes when iPod is connected ticjed and sync only ticked songs and videos ticked.
    I have tried sync'ing like this and with both unticked.
    I have triied sync'ing from this page and also the File drop down.
    The best I have achieved so for is it saying it is sync'ing but I don't get the usual message at the top of sync'ing 1 of 5226 or whatever that I used to.
    Any tips from cyberspace?

    Hi elleestgemma,
    Thanks for visiting Apple Support Communities.
    You may want to use this article to confirm that iTunes is set up to sync automatically:
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12113
    Regards,
    Jeremy

  • Need help with iPod classic/Alpine stereo deck interface

    Hey All-
    I have installed a brand new Alpine CDE-143BT stereo deck in my car.  I have a 160gb iPod classic that I connect and control via the iPod sync cable, directly into the USB port on the deck. I currently have 113GB of music on the iPod.  The deck is less than 4 months old, and the iPod also has the most current software on it. 
    When I do an alphabetical search for Artist, Album, etc. I have noticed that not all of the letters in the search take me to that letter group.  For example, when I do a search for "D" it goes to "The Crystal Method";  "M-T" it takes me to "The Kinks", and so on.  It seems to be worse with an Artist search over Album search. 
    Any suggestions?

    If you have full resolution copies of the photos on the iPod have a look here: Apple Knowledge Base article - Use Disk Mode to copy photos from iPod
    If not, there are a few programs out there for recovering photos from an iPod, have a look at the ones below. If you search the internet you can find more. Just be aware that what you'll be recovering will be photos optimised for the iPod so they won't be the same quality as the original full resolution versions:
    Keith's iPod Photo Reader Mac only
    iPod Photo Liberator Mac & Windows
    TouchCopy Mac and Windows Versions (iPhone and iPod Touch compatible)

  • Problem syncing itunes 12 with ipod classic on a PC

    Hi I just purchased a new Lenovo Yoga Pro 3 and installed the latest itunes 12 on it, but it won't sync with my ipod classic.  The itunes detects my ipod classic, but won't sync the music files and just ejects the ipod instead.  I have tried installing an older version of itunes onto my computer (version 11) but version 11 won't work on this laptop.  Please help!

    Unfortunately I cannot get the movies to play through Quicktime at all on the PC - the movie seems to play (timer runs and the little triagle moves), but all I get is a blank screen... The first time I tried to play one of the files, QT told me I may need to download additional codecs (although it did not indicate which one) - and directed me to the third-party codec download site. However, after downloading several of the different codecs, the .mov files still won't play through QT on the PC.
    Rule of Thumb: never download codec components arbitrarily. Since the files load into the QT Player, what you should have done was open the "Inspector" window and check the "Format:" entry to see which codec was used to compressed the video and then download the "correct" QT codec component and only the needed one.
    Is it not possible to get these files to play on a PC since they were imported and made on an iMac with iMovie?
    I would tend to suspect that you may be using an HDD or DVD camcorder here. Basically, the MOV file container is generic and can hold any valid combination of audio and video compression formats. DV would have imported as DV content. AVCHD or HDV would have imported as AIC/AIFF content which is normally supported intrinsically by QT. On the other hand, the content from MPEG2/AC3 based camcorders employs a special iMovie '08 import/conversion module which converts the AC3 to AIFF and the MPEG-2 "P-frames" and "B-frames" to "I-frames" which effectively turns the video into an M-JPEG track but leaves it labeled as MPEG-2 content which would likely confuse the QT Player. Further, if iLife '08 itself installs the playback component for this compression combination, you may not be able to locate/install a Windows version of this playback codec at all and may end up having to convert your DVD stored MOV files on an iLife '08 equipped Mac.

  • Exercising/ Running Marathon with Ipod Classic

    Hi there and sorry in advance if this is a tired and already answered question. But I looked and could not find a similar topic.
    I run extensively 5 mile a day, even in winters. And workout extensively too, plyometrics, etc. And I am wanting to buy a new ipod. Music is my life and I have a very enormous collection of music.
    Here are the questions
    1) The max capacity available is with the ipod classic 120 GB. Which is an excellent choice for me. BUT is it a good choice for someone like me who is going to be running around with it and exposing it to jerks and bumps and a lot of movement during play?
    2) Is the ipod touch a better option (64GB) if I were to use it extensively while running, gyming etc? I understand that everyone will give the usual stuff about flash based memory Vs hard disc (in case of classic). But is that really the case or are there Ipod classic owners who subject it to a lot of abuse and have never reported problems?
    I only ask because the difference in terms of money for Ipod 120 GB classic Vs the new ipod touch 64 GB is quite a lot.
    Your help and direction to further articles/ research would really help me. I greatly appreciate you taking the time for reading this and choosing to answer.
    Thank you

    is the obvious answer, but I think that if you are going to be using it for this then the classic is too big a risk to take.
    From my experience, hard disks can sometimes take quite a bit of bashing about, but nothing like flash based memory does. It seems very hit and miss, some people manage to get away with it for quite a long time, but if you use a classic for this purpose then there is a big risk of it falling over after a very short amount of time.
    Basically, if you can take the financial risk of needing to replace it every six months then go for it if the extra capacity is important, but if a damaged ipod will result in no music at all for a while then it's got to be flash.

  • I can't sync my playlists with ipod classic or a new ipod touch.

    I have been having problems with my iPod Classic in my car.  Colleague used his iphone with no issues. I reset my iPod classic to original factory settings but now when I sync my playlists with iTunes are not included.  Very strange.

    I'm having the same problem with my 30GB U2 iPod. I used iSquint to convert my video, and it plays perfectly fine on my iTunes, but it just goes to a black screen when I try to play it on my iPod. The movie is in Mpeg-4 format, which is supposed to work on the iPod-- right?
    -Sakinah

  • Unusual syncing problem with ipod Classic

    I recently bought a new 160 Gb ipod Classic and the first one that came seemed to sync all my music but as soon as I removed the cable I got an Apple screen and an unresponsive ipod. Eventually Apple swapped it for a second ipod. I found it difficult to get this one to work properly although the hard disk on this one hadn't failed like the first one.
    I did have to restore the new ipod at least twice and after the second time I decided not to sync all my music at once as before but selected a few genres to start with and it worked fine so I gradually selected more and more genres each time I synced it until I had all my music on the ipod. So all was fine.
    After using the ipod for a couple of weeks or so with this I decided to try and sync the ipod by selecting All the music rather than by genre. As all the music was already on the ipod this didn't take very long to sync. As I normally play the music on random shuffle I selected shuffle and what happened next I've never seen before but the track that was about to be played appeared on the screen but didn't start playing. As I pressed the play button the track wouldn't play but the ipod jumped to the start of the next track and just kept doing that without playing anything.
    I then stopped this and decided to sync the ipod as before by selecting all the genres. When this was done the ipod then played normally as before. While this is fine I'd like to be able to sync my ipod by selecting all the music as I've been doing for years with my old ipod Classic 80 Gb. Is there anyone who can explain what might be causing this problem to occur?

    Ok here goes, after 6 weeks of restoring, resetting, putting device into manual scan, manually resetting, downloading itunes older versions, newer versions and all around fighting my ipod; I have had the same results. When restoring through itunes the ipod is "still named", now one would think when doing a full system restore on the ipod via itunes it would do a full restore and the name would be no longer existent, so not the case. I have gotten multiple error messages, this is the most prevalent, "The "ipod name" cannot be synced. A duplicate file name was specified", another is in order for this ipod to work you must restore with itunes. I am thinking that there is problem with the new software, you see yesterday I set up a computer that has XP and itunes 7, the sync went without a hitch, no freezes, no long pauses, no problems. Then I made the mistake of hitting the button to update itunes "newer version", rediculous mistake. All of the problems are as pevalent as before, ipod will not sync, manually I can add movies and music but no more than 264 songs will add. My question is, why did Apple create this very nice, durable large player if they do not have the capability to serve they customers with the correct software?

  • Ipad 2 charger for ipod classic

    I just bought the iPad 2 yesterday, and I'm wondering if the charger that comes along with it can be used for my old 160G iPod Classic.
    Thanks in advance for your reply.

    Hi Chris,
    I just did an experiment that's baffling me and I wonder if you or anyone else can explain it. Charging an iPod Classic 80 with the following result:
    USB to MacBook Pro: charges fine
    USB to small iPhone wall adapter: charges fine
    USB to 10W iPad wall adapter: does not charge
    I've gone back and forth and gotten the above results predictably, also used two different 10W adapters, same story.
    Any idea why?
    - Dave Ro

Maybe you are looking for

  • Showing R/3 Table as a Grid in Web Dynpro

    Hello, I am on SAP Netweaver 7.0 SP10. I am developing a Visual Composer screen to show list of products. I have list of products in a Table from backend. But in VC , I dont want to show it as table. Instead of displaying the products in a Table, I w

  • Record a 3 hour live webcast video & audio

    Can QT record a webcast? If yes, how? I don't see the controls for recording. If no, then what is "the program" to use? I have been searching several discussions and programs but nothing seems to be a for sure solution unless I am recording from a ca

  • Jvm crash on 1.4.2_04 BEA/Solaris

    our weblogic managed server crashed on production with tht following error HotSpot Virtual Machine Error : 11 # Error ID : 4F530E43505002EF 01 we opened a case with BEA and they redirected us to SUN as it seems to be a bug in SUN jvm 1.4.2_04. http:/

  • Header level pricing condition error

    Hi Friends, In a PO, I have 5 line items. I am giving freight condition type at header level for the entire po as Rs. 500. But the system calculates the freight charge as 500*5=2500. The freight condition type FRB1 is a fixed charge condition type. T

  • Lightroomm 5,lightroom mobile, sync

    Hi. I have lightroom 5 which was installed from disc and i have since purchased adobe cc. i also installed the trial of lightroom mobile when it was first released. Now my i am trying to sync lightroom mobile but it is telling me that my trial has ex