IMovie on iPad 2 will not export to camera roll
I just put together a 6 1/2 minute iMovie on my iPad 2, and I cannot export it to the camera roll (in any resolution). There are a lot of videos, photos (taken with three different Canon digital cameras, panoramic pictures created with the Autostitch application, and photo montages created with the Montage application. The videos include very long segments (1 minute plus) of which I am only using 6-7 seconds. The progress bar when attempting to export shows no progress, even after hours of working on the video. Occasionaly, iMovie says it cannot export the movie.
Any ideas about what is wrong?
I can export simple, small movies, but this was a pretty ambitious project, and I'm not having any luck with it.
Albert
It turns out that imovie does not like to have too many video clips. When you have too many video clips, and you trim them significantly, there are rendering problems if the part of the clip you trimmed overlaps past (either before or after in time) the clips on either side of the problematic clip. If you end up trimming your clips that are imported into iMovie, then everything seems to work fairly well. This is pretty lake, because when I do a quick and dirty edit of a single 15 minute mountain biking segment down to two minutes, everything seems to work fine.
Albert
Similar Messages
-
TS3991 if i reset my i pad will it save my camera roll,my photo stream, my videos
if i reset my ipad will it save my camera roll, videoa,photo stream
No, it will only reset what it says it will reset.
Resetting settings will remove all the customised settings you have made anywhere on the device. Resetting network settings will reset all your network info including saved networks. etc etc. None these will do anything to your camera roll etc. -
IMovie for my iPad and iPhone will not export movies how do I fix this?
iMovie for my iPad and iPhone will not export movies how do I fix this?
Same here. Have exported a handful of movies before..faced this issue for the first time a few days ago. What footage are you trying to edit and export? (E.g. Shot with camera app, other social media apps like Snapchat, Vine, Instagram?)
I did some troubleshooting..
I was putting together all saved videos from Snapchat.. no luck. Export screen comes up, but progress bar doesn't move.
Mixed some footage in there shot with actual iPhone camera app.. no luck.
Removed all Snapchat footage.. it worked straight away.
BUT ... it would make sense if I didn't just compile a bunch of Snapchat vids a few weeks ago and export them just fine?
So it's something to do with the actual footage I assume? -
Videos created in iMovie on the new ipad will not play on PC with Quicktime after being exported to the Camera Roll and copied to the PC. Movie will play but with a black screen only. Audio ok. Was able to do before ios 6 but not now.
I'm having the same problem. All of the movies I export out of iMovie since upgrading to the latest version show up with no video, only audio, in Quicktime. Ironically the video place just fine in Windows Media Player and also in iTunes.
-
Ipad will not turn off, sound button does not work, camera does not work, screen will not rotate. Have new ios and update.
Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset. -
When I try to log onto Facebook, my iPad will not recognize my password, and I get an error code 190, but I can log on on my HP desktop. What is code 190, and why do I get it?
I was using the FB app that came with the iPad. What I eventually did was.
1. Held down both home key and on-off button until iPad shut down, then rebooted.
2. Uninstalled FB app.
3. Went to App Store and re-installed FB app.
The iPad had numerous problems. My son saw my plea on FB as I was accessing it through my HP computer, and he walked me through it. While he was at it, he taught me how to disconnect auto-correct. I am not certain that I want to keep that off, but everything is working the way it is supposed to the way it was in the beginning.
I am curious, though, as to what ears to the problem in the first place. After checking various sites, it seems that a code 190 has to do with windows not Apple.
But thank you for the response. -
TS3274 ipad will not charge when USB cord connected to PC or socket.
When i plug the USB cord to either electrical socket or computer. ipad will not charge. Says NOT CHARGING. Please HELP.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Solution when iMovie or FCE will not import AVCHD files or MTS files
Problem: iMovie or FCE will not import your footage from SDHC camera with files in AVCHD structure, or cannot import .mts or .m2ht files (which you may have copied from AVCHD structure. When mounting camera, you can see the camera as disk but iMovie will not try to import footage. If you point Final Cut Express (FCE) to the file structure, it fails to recognize it as a valid file structure. (I have Canon HF10, but understand that this problem is common on many camera models, maybe camera has been turned off at the wrong moment?)
Cause: Faulty file structure on camera or disk
Soultion: Rebuild AVCHD file structure using an AVCHD editing tool. I found multiAVCHD (multiavchd.deanbg.com), which is not perfect, but will do the job. And it is freeware (possible to donate).
I would like comments about others experience - but at least this worked for me:
- Download and install the software (Yes, you need Windows)
- Set the right parameters: mostly default, I didn´t want any recoding. But tick off to keep the source files!
- Select the AVCHD source (or source .mts or m2ts files) and destination
- Start rebuilding: select output for Sony Playstation 3
- Put the AVCHD file structure on a USB stick
*If using iMovie:*
Start iMovie and plug the USB into the mac (virtual disk (.dmg file) or other media should work fine as well). The USB may contain other files as well, but the root of AVCHD must be named AVCHD.
iMovie recognizes the drive as a camera. All is not 100% well, as the dates for making the footage is lost, and the thumbnails are distorted if seen at all, until clicked on. But then import worked for most clips. Some clips gave an error message, but FCE was able to import these (Log&transfer).
*If using FCE:* Use Log and transfer on this file structure (need not be on external disk)
If you have a better solution - please share! I suppose there are other tools out there which may correct the file structure with less side effects and no errors.
If you go for this solution - remember the author of multiAVCHD, he will surely appreciate a donation. I guess everybody will agree that this is worth at least as much as you paid for your SDHC card.
Why a function to correct faulty file structure is not included in iMovie and FCE is beyond my understanding!
I notice many users salvage their footage by converting the .MTS files, using Handbrake etc. But I believe rebuilding the file structure is faster and with no quality reduction.Hi everyone,
I'm hoping someone is still subscribed to this and can help.
I have a Sony HDR-SR10. Yesterday I was able to connect it to my iMac by USB and view all the footage in the import window of iMovie (08).
Last night, to save time sorting at home, I took it to work with me and using the software that came with the camera installed on a Windows PC went through to see which files were rubbish and could be deleted before importing to speed up the transfer on to my mac.
Today, my Mac won't recognise the Camera!?!?!?!
Have I inadvertently reformatted the .MTS files or the camera itself, to windows or something? CanI change it back??
I'm currently creating a new disk image of the camera on my Mac in the vain hope that it will work and be recognised by the Mac as a camera. I can see from the progress box the following text:
Creating Image "Sony Camcorder Media.dmg"
=====Progress Bar=====
Reading (WindowsFAT32 :1)...
Which is why I think I've done something seriously wrong!! .. because it mentions windows!
HELP! HELP! HELP!
I have my entire honeymoon and the first year of my son on this camera and I want to edit with iMovie! Especially as I just paid for iLife 09 upgrade! -
iPad will not register as a devive in iTunes. Windows thinks it is a camera. This is new since moving to IOS 6
Try the steps in this http://support.apple.com/kb/TS1538
-
HT4623 How come my Ipad will not turn on????
How come my ipad will not turn on for no reason i couldn't turn it back on?
It could be the battery has completely drained. Plug the iPad in the charger that came with it and plug that into a good wall outlet. Wait one hour. It may take that long for the iPad to respond. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
If the iPad restarts let it continue to charge until the battery is at 100%.
If it does not restart you might have experienced some sort of hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
HT201412 my ipad will not turn on
my ipad will not turn on, have been charging it now for about 1-2 hours. it was working fine today i steped away to do something and came back to work with it and now it will not come on at all. it was charging when i had it on earlyer
1. Make sure battery is charged.
2. Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears -
Tried to in stall the latest update.. now my ipad will not work at all!
Tried to install the latest update.. now my ipad will not work..
samanthafaith wrote:
I have the ipad 4th generation. I tried installing the latest version and the screen came up with the arrow and itunes sign. Im pretty sure I have the latest version of itunes. After I tried restoring it on my coumpter it now has an apple logo staying on the screen.
That would be the indication of Recovery Mode. You can try instructions from this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
If you attempt it a couple of times and it does not complete, then make an appointment at the Genius Bar of the nearest Apple Store, or Apple Service Provider to check for hardware problems. -
My ipad will not charge up. it just shows the red battery signal and then switches off
my ipad will not charge up. it just shows the red battery signal and then switches off. The same charger succesfully charges other idas so i know it is no the charger that is faulty.Any suggestions
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom
BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only. -
My Ipad will not charge and Ihave booted it and still no chargeing tryed computer and wall plug
my Ipad will not charge and Ihave booted it and still no chargeing tryed computer and wall plug
The best way to charge an iPad is to use the charger that came with it connected to a known good wall outlet. The following might be the problem.
No power in the outlet.
Bad charger unit. Try a different charger.
Bad cable. Try a know good cable.
Dirt in the connector on the iPad. Check and clean.
A fault in the charging software. Reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
A hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
My iPad will not turn on. I have done everything I can think of
My iPad will not turn on. I have used the charger that came with it an iPad iHome dock and another iPad charger that goes with another iPadit has been on one charger or another for 2 days. I have done a hard reset and even put it in recovery mode and was able to do a restore but it will only show dead battery logo or charging. Any ideas?
Also I was not having any battery problems before this. It would last all day with a generous amount of use.
Maybe you are looking for
-
4 days ago I neede to have a picture developed. Opened iPhoto and noticed over 15 Albums are no longer there. I belive this and other problems started once I downloaded OX S app. And now I have lots of problems. Lots of flickering when playing Black
-
AUTOMMATION ISSUE WITH LOGIC 9
Hey peeps, Im new to logic, still trying to find my way around it, iv noticed that when i try to automate a filter ect the automation begins before i reach's the line i have draw, like a latency but the other way round, its coming in to soon, not lat
-
Hi, I was wondering if anyone can help me with a problem I'm having. I have a Thinkpad X230i laptop which is used in a docking station. The monitor is plugged into the docking station using the VGA port. There seems to be a slight issue with the lapt
-
Adding time to the FLVplayback component
Hi everyone, Im using the FLVplayback component for a project im doing. I want to add the time elapsed and time left on the controls. I dont really want to create my own controls, as im happy with the flv playback component. The FLVs playing in the c
-
Every time I start Firefox the "Thank you for upgrading..."web page shows up. I have my settings set to open with a blank page, but this page always shows up ever since I upgraded.