IMovie plays back slowly with Sony HC1

Hi Guys
I'm really having a dissapointing experience with iMovie at the moment and I have pretty much reached the end of paitence with it.
I have a sony HC1 camera (HDV1080i) and I have a Sony FX1 (HDV1080i) camera
I'm running a MacBook Pro with 2 Gig of RAM but have also seen the same results on an intel iMac.
The Problem:
When I import footage from his camera in iMovie the footage comes in fine, but then plays back out of sync and sometimes at half speed... on my camera FX1 it plays back half speed.
I've checked all the settings on the camera and made sure that it handels fine.
When I show package contents the quicktime file plays the movie back fine... in quicktime... but though iMovie... slowly and out of sync.
Software is up to date and the system seems to be running smoothly.
This is not the first time I have seen this happen and I'm really perplexed to the reason why this is happening?
Any suggestions?

Hi Normanwh,
If you are having video playback issues in iTunes on your Windows machine, you may find the following article helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Regards,
- Brenden

Similar Messages

  • I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    The description says it all.    I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    Hi Normanwh,
    If you are having video playback issues in iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Regards,
    - Brenden

  • I can watch my custom DVD in iDVD 7 preview but burnt dvd plays back black with only the audio

    I can watch my custom created DVD in iDVD 7 preview but once the disc is burnt and I play it back in DVD Player, the screen is black with only the audio playing back. I have tried using three different blank DVD manufactures.

    Hi
    Most probably depends on what movie codec You feed iDVD. May be You find any clue here.
    DVD quality
    1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus  less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    About double on DL DVDs.
    2. Video from
    • FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
    • iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
    when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
    • iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
    3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09  this can also be set)
    This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
    4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
    use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
    5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
    6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
    7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
    (I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
    8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
    iDVD quality also depends on.
    • DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
    deliver anything better that this.
    HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
    These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
    Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
    _ Roxio Toast™ 10 Pro incl. BD-component
    _ BD disks and burner if full length movies are to be stored
    _ BD-Player or PlayStation3 - to be able to playback
    The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
    Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
    • HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
    less than 5Gb and Your result will most probably not play.
    • How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
    • Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
    • Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
    iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
    • What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
    other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
    Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
    strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
    Convert to .aiff first and use this in movie project
    • What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
    (If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
    (Dropping a PAL movie into a NTSC iDVD project
    (US) NTSC DVDs most often are playable in EU
    (EU) PAL DVDs most often needs to be converted to play in US
    UNLESS. They are play-backed by a Mac - then You need not to care
    • What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
    • How You encode and burn it. Two settings prior iDVD’08 or 09
    Pro Quality (only in iDVD 08 & 09)
    Best / High Quality (not always - most often not)
    Best / High Performances (most often my choice before Pro Quality)
    1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
    (x4 by some and may be even better)
    2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
    Region codes.
    iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
    DVD Studio pro can set Region codes.
    1 = US
    2 = EU
    unclemano wrote
    What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
    I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
    I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
    For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround e.g. Energy-Saver
    • Don’t let HD spin down or be turned off (in Energy-Save)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
    pointer to this - turns on screen saver - to show that it has nothing to show
    Yours Bengt W

  • S everyone else still getting play back errors with LP8?

    Hope this is resolved, i use a M-Powered copy of Pro Tools to track against a 2 mix of the Logic Session, and i barely get the tracks i did in LP6 to play with out a error, i can not run any midi, i got more tracks in previous version to play back then i do now in Leo with LP8.
    to narrow it down, i only use one verb bus, delay and echo bus, compressor on every channel used including Bus, Ozone on the master channel, i run only 20 stereo tracks, 4 which are with the ESX24., in Logic 6 i was running all this with a few Logic plugs on the master channel and not a hick up, and i was using a older 1.2 Ghz macbook pro, now i have a Core 2 Duo 2.4Ghz 17 inch MBP and i can not play beyond 8 tracks with compressors and a verb channel.
    Anyone find another work around, i was using the the one with the terminal command but i see no effect on it's performance anymore.
    -*MBP 17, Logic Pro, PT M-Powered with Ozone., DUET.*

    Logic Pro wrote:
    Hope this is resolved, i use a M-Powered copy of Pro Tools to track against a 2 mix of the Logic Session, and i barely get the tracks i did in LP6 to play with out a error, i can not run any midi, i got more tracks in previous version to play back then i do now in Leo with LP8.
    Sorry I'm a little bit confused
    this is your main question...
    Are you using M-powerd copy of Protools?
    if you don't use any Protools version maybe the issue is related with Apogee.
    in any case I had a similar problem on iMac...
    and... maybe i'm lucky, but the fresh reinstall without use DIGI or M-Powered (AVID) drivers and any Protools version ... PTLE is very similar as PTLE M-Powerd...
    I'm refering to that when I talk about PTLE.
    But if you continue to have the issue after a fresh instal without installin PT M-Powered oe any PT version... maybe you can try to use the internal built in audio card of your Mac book Pro...
    I hope that you will find the best way to solve your issue.
    Protools HD is not the same at all...
    Logic works fine on HD system.
    Good Luck
    G

  • FCP X viewer window plays back video with color errors

    I am new to Final Cut X and Final Cut PRo in general. I am doing a project at work where I needed to learn FCPX.
    I figured out a lot pretty fast. But one issue i am having is that all of the clips being played back in the viewer window are being played back with this weird color error. Its happens to movie clips, still photos and titles. See below, This is a screenshot of what it looks like. When I first installed FCP it wasn't doing this but now it started doing it all the time. Its annoying because I can't see the transitions properly, and sometimes video gets out of sync with audio.
    I am running Lion 10.7.1 with a Mac Pro 2 x 2.8ghx Quad Core Xeon. 16GB RAM. Nothing special on the HD's but they are at 7200rpm.
    I tried adjusting prefs for playback quality, I tried transcoding media. However, its doing this to a still frame jpeg as well, which should be giving the machine ay trouble. I feel like my machine should be able to keep up with FCPX.
    EDIT: I also restarted my machine a bunch of times and killed all processes that weren't necessary for the machine to run and for FCP to be working. I also have an NVIDIA GeForce 8800 GT graphics card, which meets the requirements for FCP X.

    I am also seeing the same issue. I have an Eizo Display and if I color correct with the i1 it behaves as above. It has been driving me crazy. If I switch back to standard profile it seems to work but my dislplay is not color calibrated. Is there a fix?

  • IMovie"11 cannot play AVI created with Sony PlayMemoryHome

    As I cannot make my Sony PCR-DC110 recognized on the Firewire port of my brand new iMac 21"5 (purchased last week, plus purchased Thunderbolt to Firewire 800 adapter, plus purchased a 6-pin to 4-pin Firewire cable), I have captured many of my mini DV tapes on Sony Play Memory Home into a AVI file format.
    1. iMovie 11 does not recognize this AVI file format, any clue ?
    2. Is there a software able to convert from this AVI to an AVI understandable by iMovie ?
    Thanks

    Will your videos play in Quicktime 10 (the version in Mavericks)?  If yes, but after automatic conversion I think you can save the converted file and this will most likely be importable into iMovie.
    If not there are lots of free and paid conversion apps.  I use the free MediaConverter a lot (http://media-converter.sourceforge.net)
    The free app VideoSpec  (http://videospec.free.fr/english/) will show you the detailed format of your videos
    Its a matter of trying out various formats until you find one that works - Unfortunately I have not seen a clear list of formats that are supported by iMovie 10.
    Geoff.

  • QT won't play back audio with MPEG2 files

    I've upgraded to Pro and have added the MPEG2 plugin. QT plays the video fine, but I don't get audio. Have checked the files with another application (VLC) and the files play fine. I've using files from a new Sony hard disk digital camera. Anyone have an idea as to what the problem may be?
    Thanks,
    --Mike

    I've upgraded to Pro and have added the MPEG2 plugin. QT plays the video fine, but I don't get audio.
    Since you did not specify your particular "playback" work flow here, it is difficult to determine your specific problem. (I.e., did you drag and drop the file to an application that would automatically attempt a "transcoding" of the material which the MPEG-2 component cannot handle.) Then too, the Sony MPEG VX format in itself is proprietary and the technical specifications do not appear to have been pubished for general public consumption. (I.e., we don't know the specifics of the format. For instance, is it an AC3 audio format, was it VRB encoded, etc.) See MPEG-2 FAQs
    However, since you already have the MPEG-2 component installed, have you tried playback/conversion in an application like MPEG Streamclip? It may allow you to convert the file to DV for editing or directly to other QT/iPod compatible formats with audio if no editing is required/desired.

  • Stutter when playing back photos with Ken Burns effects

    I am new to iMovie (& Macs) and am trying to replicate some complex motion on a still photo that I had on my PC with Adobe Premiere.
    The motion I would like is to pan and/or zoom around a photo, then pause at the end of the motion for a few seconds before transitioning to the next photo. I tried to do this by basically using two paired clips:
    1) add ken burns effects to the clip to accomplish the pan/zoom
    2) copy the clip
    3) on the copy, use the option key to transfer the settings from the "End" to the "Start" (which should make the clip motionless, but give it the same zoom and location settings as the end of the first clip)
    4) set the second clip duration to a few seconds (first clip is generally between 6-10 seconds originally)
    Sometimes this works great, but other times I get an inexplicable stutter between the two clips (both during playback on my computer or in the finished DVD), even though theoretically, the frames should be exactly the same between the two clips. It seems to happen after I've added transitions between photos (but not between the 2 paired clips that make up the motion), after it's re-rendered items.
    Does anyone know why I would be getting this stutter (it looks like a flash of white, actually, that is only 1 frame long) ? When I walk through the movie, frame by frame, it looks like somehow I am actually getting a single white frame at the end of the first clip, but I have no idea where this frame is coming from or how to get rid of it.
    Is there a better way to accomplish this type of motion ? I did some searching, but didn't find any topics on doing complex motions - has anyone seen any.
    Thanks for any help.

    I have had something similar happen in my slideshows. I would first check to see if you have a flash frame between the photos (which I've found sometimes randomly occurs for some unknown reason). You can enlarge the timeline as big as possible to see if you have one and just delete it. But I've also had a flash of white that appears at the end of a photo that is not a flash frame on the timeline. The only way I've figured to get rid of it is to delete the photo and re-insert it. Which is a pain, but has worked for me.

  • Strange play back issue with iTunes.

    Playing songs from my PC the chosen song plays fine to a conclusion, but then jumps to another song as if switched to 'shuffle' which it isnt. The following songs are always the same. There doesn't appear to be any thread between them they are just always the same and they are songs I rarely if ever play so I can't understand why. I've checked all the controls and all seems fine. My Ipod seems to work fine and will play a whole album without problems. I have xp on the PC and am using iTunes 10. Can anyone help?

    Greetings Rusty,
    Welcome to Apple Discussions.
    This may or may not help, but;
    Try selecting the songs that are starting at random parts during the file.
    Right-click on the selected file and select "Get Info".
    If the "Start Time" for the track is not set to "0", then set it to "0".
    Click "OK".
    Does this help?
    Kind regards,
    Peter.
    Message was edited by: Peter Miller

  • How do I upload my DV videos to my macbook pro if iMovie doesn't recognize a Sony DCR-TRV20?

    I purchased a firewire 800 9-pin to 4-pin cable and then found out my macbook pro nor imovie '11 even recognize my cameras existence.  I have precious videos on mini DV tapes that I need to upload.  Any suggestions?

    Hi
    My long notes on this
    NO CAMERA or A/D-box
    Cable
    • Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    • Camera set in Playback mode - NOT Recording mode
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK e.g. recording and playback to TV)
    A/D-box
    • Is the dip-switches set right ?
    • Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
    • Try resetting it
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    • FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
    External device’s (hard disk’s)
    • Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
    • MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited. No Camera or A/D-box
    • GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
    • Does Your Mac have a FireWire Port
    • White MacBooks - don't
    • MacBook-Air - don't
    if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
    else - NO SOLUTION
    Only option as I get it is either
    • Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
    • Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
    • If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
    You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
    has one and this FW-Card-port works greatly.
    SoftWare
    • Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    • Screen Saver - OFF
    • Energy Saver - OFF
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie’08 (7.1.?), 09 or 11 ?
    • iMovie HD 6 (6.0.4/3) ?
    Other ways to import Your miniDV tape
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended   formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About . . / More . .
    under Firewire.. what do you read . . ?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choice / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    No Camera or bad import
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that helps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
    MaryBoog wrote
    Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
    //support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
    What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
    Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
    Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
    Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
    This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
    Yours Bengt W

  • Problem importing with sony cam

    I've tried importing from a sony HDR-HC9 mini hdv tape without any luck , my cam is on power cable , the firewire plug in then i open imovie and then i click on import from camera , i get the blue screen that says importing but nothing is recording . i am sure one of you guys had this problem sooo what am i doing wrong ?
    thanks for your time

    Hi
    See if You find any help in my list.
    *NO CAMERA or A/D-box*
    Cable
    • Sure that You use the FireWire - USB will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toogle in iMovie pref. Play-back via Camera (on<->off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    • FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    SoftWare
    • Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    *Other ways to import Your miniDV tape*
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choise / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    *No Camera or bad import*
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that halps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
    Yours Bengt W

  • Unable to play back real instrument tracks

    greetings - i've been working on a song in Garage Band for a couple of years. the back story is that this file has grown to 2.5GB in size (all my other GB files are a lot less). it has about 10 real instrument tracks and 6 software tracks. Yesterday while working on the file a strange thing started happening; the first (of 3) software piano track started playing back intermittently with a bunch of reverb; i had not requested that it have reverb. i tried removing reverb, i tried soloing and unsoloing, muting and unmuting, and sometimes that would get rid of the reverb. so that was anomaly #1 yesterday. Finally, after finishing the session and saving/ closing the file, i wanted to make a backup copy so did command-D. Possible anomaly #2: when the original file and the backup file names appeared in the window, i renamed both; then i realized that the Mac was still in the process of copying the file; so i don't know if that renaming introduced a problem. Once the backup was finished, i opened the file (and the backup file, subsequently), and the REAL instrument tracks (plus the first midi piano track i laid down) NO LONGER MAKE ANY SOUND. the software drums, flute, and pianos 2&3 play back;  the vocal sounds like the reverb is playing back but not the original track (i assigned basic female reverb to the vocal track). Everything visually still seems to be present in the file - all the details of instrument, level, pan, etc. but i'm getting no sound from the real instrument tracks or the 1st software piano track. i have TRIED all the suggestions for optimizing performance given in GB help. i am stuck and truly hope my arrangement will once again sound! many thanks in advance for any suggestions; Matthew Allen
    <Email Edited By Host>

    guitarworld wrote:
    the first (of 3) software piano track started playing back intermittently with a bunch of reverb;
    try toggling the Ducking menuItem, that's solved some similar issues
    (and you can safely ignore the post about 8 tracks, it's not relevant)

  • Record audio clip and play back it into media player

    how can i record voice clip using java application and play back it with media player.

    870902 wrote:
    how can i record voice clip using java application and play back it with media player.1) Record from "javasound://0" using a Processor / DataSink
    2) Play back the file from 1 using a Player

  • Logic wont play back audio regions under certain tracks.

    Hello! I am rearranging my audio files (throwing them all to my secondary hard drive, where I record to ). I did this, and now certain audio files to do not play back in my logic projects, but there is no warning that says the file cannot be found--which is what I am used to happening. At that point I would either hit the Search button, or the Manually Find button. Instead, the region appears as per usual, just with nothing playing back. I know I could import the audio back into my projects manually--which would be fine for those that start at a specific, clean-cut time, but what about all those spliced and diced regions that are cut up and laid out all over the place!?
    I discovered new details to the weirdness . . .
    It seems, in the few projects that I relocated audio, that the affected regions cannot be played back unless I move them to another audio track. What??? For example, the vocal track in one song, which is all set up with its plugins and such as Audio Track 2, will produce no sound unless I drag it to another audio track, say Audio Track 3 or 4. It is bonkers!! What the heck is that about?
    This is what happened in all of the projects affected by my source audio rearrangement. Sure, I could easily just copy my channel strip settings to a new track, relocate my audio region to it, and hope all goes well thereforth, but I would much rather get to the root of this oddity so it doesn't somehow buck me later.
    What do you think it could be?
    Oh yea, in one of the projects, all the other audio tracks seem to play back fine, except for the recorded bass track. Okay, so just to check, I drag the bass audio to another track--yep, it does play back. But I realized that the track that held the bass region (Track 4) is actually playing back the vocals (which are also playing back normally in their intended track). I initially didn't notice the extra vocals underneath my normal vocals track, with their low-key bass plug-in settings. Funny thing is, there isn't even a region on Track 4 any more! How is it playing anything back at all?? Not that it makes any more sense that it would be playing back vocals with a bass region.
    Also, the fact that Logic Pro keeps quitting unexpectedly does not inspire much confidence. This has just been lately, and I've only been playing with these projects lately, trying to figure this out.
    Is my Logic haunted? =(
    I welcome any and all objective suggestions! I am feeling just the slightest bit overwhelmed by this odd behavior.
    Thanks!
    (i checked, but did not see that the tracks were muted in anyway, including the region itself)

    I figured something out that might tell someone what I did to screw things up!
    I think I did something to mess up the environment or something. I know this much now: When I created a new project, I created 6 new audio tracks. I noticed that a piece of previously recorded audio that I imported into the project would only play back on ever other track! I than noticed that on the every other track (that would not play back the audio when it was dragged to it), there was neither a single circle (indicating mono for the track) or the two overlapping circles (indicating stereo for the track) beneath the channel's level meter.
    There must be some significance to this that I do not quite understand!
    I then went back and launched several of my problematic projects to see if the tracks that would not play back audio also did not display either the mono or stereo circles on their respective channel strips. They did not! What kind of global setting did I change that would cause this?
    There was one project that had one track that bared neither mono or stereo an played back its audio (Although, in this same project, there was another track that bared neither symbol that was not playing back its audio). Anyway, I noticed something that was weird to me, but will likely tell someone what the heck I must have inadvertently done to cause all of this:
    When I change one audio track (that bares the mono symbol) into stereo, the next audio track (that didn't display either symbol) seems like it is combined with the previous track's output!
    Very strange! Did I somehow set some global preference to split up my audio tracks across each not audio track?? If so, could someone please explain to me what and I did that? Thanks!

  • Hi, haven't used iMovie in years.  I shot some video with my cell phone camera (Samsung Galaxy S2).  When I tried to make a movie, the clips I downloaded played back sideways on iMovie.  Is there any way I an flip the video from horizontal to vertical?

    Hi, haven't used iMovie in years.  I shot some video with my cell phone camera (Samsung Galaxy S2).  When I tried to make a movie, the clips I downloaded played back sideways on iMovie.  Is there any way I an flip the video from horizontal to vertical?  Thanks.

    You actually want a vertical video??
    What would you show that on?!
    Rotating video or photos in iMovie 11:
    http://help.apple.com/imovie/#mov3a884fd3
    In earlier versions of iMovie you can also do this using Quicktime Pro 7:
    Open MOV file in QT Pro (QT 7.6.6)
    Window -> Show Movie Properties
    select "Video Track"
    select "Visual Settings" from lower window
    check "Preserve Aspect Ratio"
    Click on appropriate rotation icon (MOV rotates!)
    Click back on the open MOV in Player Window
    FILE -> Save
    You can also do this using TransformMovie, available here:
    http://www.macupdate.com/info.php/id/21859

Maybe you are looking for