IMovie Projects

How do I split a large iMovie project file into a number of smaller projects

When you have your project open and selected, try clicking on the Adjust button in the topmost window bar. Then click on the crop button. You have three styles: Fit, Crop, Ken Burns. Fiddle around with the Crop button
I had the opposite problem. I had old digitized movie film that was being formated as HD and was cutting off the top and bottom of the image. For my problem I clicked the Fit button which put black bands on the left and right sides but now I see the whole image. In your instance, clicking on the Crop button may help. Or maybe the Fit button will work. The old iMovie was much clearer about this issue.

Similar Messages

Can i move an unfinished imovie project from one mac to another

so i started a project in imovie on my parents mac and now i want to finish it off on my macbook. is there anyway I can transfer the project????

Yup. however, seeing as how it isn't finalized, well this ought to work.
1-connect up your macbook to your parents' mac (file sharing?)
2-open up iMovie (on your parents' mac)
3-click on "project library" in the upper right hand corner of your iMovie window. You should see your other hard drive there, also. drag your project to this drive. If a message comes up about "project" or "project and events", choose project and events
4-launch iMovie (on your macbook) click on Project Library. and the one your transferred should be there. drag it to the iMovie projects list and it should work
oh, one last thing. Both your parents' mac and your macbook should have the same version of iMovie for this to work, so I've been told
John b

How to move an uncompleted iMovie project from one hard drive to another?

I want to move an uncompleted iMovie project form one hard drive to another. What do I move to make sure that all of parts of the project: movies, photos, sound, are moved?
Thanks, Bruce

Hi,
You can deploy the ADF Project as an ADF Library Jar file and reuse the taskflow from that jar file in another BPM Application.

When I upload audio from itunes into my imovie project, it does not show all of the track?

Hi, I have opened a new project in imovie - I have uploaded 200 photos into the project to make a Comic Book movie!
this project is 7 mins and 8 seconds long - the exact length of the audio track that I want to play during the movie!
I have selected the music by clicking the musical note button in imovie, which open up my itunes library and displays the track I want to use that is 7 mins and 8 seconds long.
When I click and drag my MP3 audio from itunes into my imovie project, i only plays the first 5 mins & 33 seconds; leaving my project in silence for the final 1 min & 3 seconds????
I have not added markers, there are no fade ins or fade outs - only the first 5 min & 33 seconds or a 7 min & 8 seconds MP3 Audio track???
I have spent 10 hours trying to rectify this problem.......
can anyone help me with this problem
Peace, Love & Happiness
Jayondrums

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

Importing clips from iMovie project (they keep ending up in the trash)

I have never tried to import other clips from another iMovie project before and I just tried it yesterday. This is what I did:
-I went into the other project and clicked on each individual clip from that project that I wanted (one at a time).
-I copied that clip and then saved it to the desktop
-From there I copied those clips to my external drive (which holds the new project that I am working on
-I then opened up the new project in iMovie
-I went to File<Import
-I selected the clips that I had copied over to the external drive
-I imported them
-They all showed up fine, they played fine and I was able to edit them and put them into the time line as well
The problem I face though is after I save the project and exit, the next time I open the project, each of those clips are missing and have been placed in the trash
What am I doing wrong?
Thanks ahead of time for your help!

It sounds like something may be preventing iMovie from properly saving the project on the external drive. The drive format may be wrong, or third-party software might be causing conflicts. More here:
http://discussions.apple.com/message.jspa?messageID=1852869#1852869
Another possibility is that you are opening the wrong project file saved inside the iMovie 5 project. If your project was originally an iMovie 4 project converted to iMovie 5 that's an easy mistake to make. More here:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=1971832
Note that the copy/export/import routine you used can be simplified enormously. iMovie 5 lets us Copy and Paste clips much more simply. To copy clips from Project A to Project B, open Project A, select all the clips you want copied to Project B, choose Edit > Copy, open Project B, move the playhead where you want to place the clips, and Paste. iMovie will import all the files that support those clips from Project A to Project B. Note that it imports the entire file for the clip, not just the clip itself. That's so the clip inherits all the non-destructive editing features it had in Project A.
To avoid Project B becoming unnecessarily large, it's important to Copy and Paste all the clips you want together. If you copy two clips at the same time that share the same file iMovie imports their source file just one time. But if you Copy and Paste two clips that share the same source file separately, iMovie imports the same file twice.
Karl

Imovie won't open my imovie project

Hello,
I was working on an imovie project when imovie kept crashing. So i backed up deleted imovie and reinstalled. Now it won't open up my .rcproject file. Nothing happens. is all my work lost? Also, when it was crashing some of my viedo clips were grayed out. Now in my event library some of the clips are grayed out. Any help would be appreciated.
Thanks

Update - I've managed to restore the file from my backup but now imovie crashes everytime i try to play it, just like before.
Thanks

Unable to open iMovie project?

I made a simple iMovie 09 project and burned it to a DVD via iDVD.
Then, to save space on my HD, I moved the project to an external HD.
Now I want to go back to the project to make some edits.   But when took it out of the external HD and placed it on my desktop, I am unable to open it in iMovie.   I've tried simply clicking on the project icon as well as doing File>Import>Movie. I also tried clicking and dragging the movie icon from the desktop to iMovie with no luck. iMovie just doesn't see to want to recognize it.
Can someone help?   Thanks?

Hi
There are so many things to this.
A. Flash drive - I even don't know if they would ever work - very doubtful
B. External hard disks - MUST be Mac OS Extended (hfs) formatted -
UNIX/DOS/FAT32/Mac OS Exchange works for most other things BUT NOT FOR VIDEO no matter if iMovie, iDVD or FinalCut is used.
C. In the folder iMovie Projects - There are NO MOVIES - but text-documents related to the projects and this document points to the Raw material in iMovie Events folder and how it is supposed to be Played/Viewed in this particular project. e.g. play Clip A from 00:00:01:13 to 00:03:45:02 and so on. So there are no movies in the project folder.
D. So if both iMovie Events and iMovie Projects folder are copied over to an external hard disk - Then the iMovie in the second Mac has no links to this and will not find it.
SO to be able to work with one project on two Macs - all moving's of Events and Projects should be done within the iMovie Application - Not on DeskTop/Finder - do not alter or move any folder named
• iMovie Events
• iMovie Projects
on DeskTop/Finder - as they can mess-up and be very hard to impossible to mend.
Yours Bengt W

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

Importing imovie project don't work

i have 16 imovie projects, some dv, some hdv. importing them into idvd6 it doesn't import all of them, some hdv and some dv yes, others not. the project is 16:9 as all the movies. they are all short 5/6 minutes. they are on an external hd, i copied some of them onto the macbook, but same problem. help please.
thank you.
macbook pro Mac OS X (10.4.8) 1gb, 100gb

Is your external Hard drive Mac OS Extended-Journaled formatted?
Sue

IMovie project corrupt after crash?

I have a problem with a seemingly corrupt iMovie project
I have been working on a holiday movie for over 12 hours
Today, my macbook pro crashed while editing the project
Aftwards I was unable to load the project.
Other, older projects can still be loaded with iMovie.
I suspect the project has been corrupted due to the crash.
I don't have any back-ups (Time Machine is not activated)
Are there any other ways to fix the corrupted file or is it permanently damaged and won't I be able to open it again?
Thanks for your help and insights!

I'm new to iMovie, and to the Mac, and for years I have heard about how wonderful the Mac is. While it doesn't have the same problems as a PC it has plenty of its own problems.
I just spent 20 straight hours putting together a movie in iMovie. As I clicked to make my very last tweak to my project, iMovie crashed.
I tried to get a hold of Apple support but their system doesn't allow access to an actual human being. Their system make you go through a series of steps to "arrange for a phone call from Apple". That system fails EVERY TIME. I get to the end and a messages pops up saying that they can't help with my problem at this time, try again. I've had a Mac for three months now and their support system fails every, single time.
So, on to the problem at hand. As I read the various forums about iMovie it has struck me as rather odd that no one seems to have a problem with the engineers at Apple creating a software package that does not allow you to save your work. Now, it took me all of a nano second to realize the likely out come of such stupidity. And, on my very first big project my prediction came true. iMovie crashed as I finished my project and destroying all of my work.
So my first question is, how could the engineers at Apple possibly justify not including a "save" and "save as" function to iMovie? The absurdity of this reaches new heights. This has disaster written all over it. And it appears that many people are having the same problems.
Secondly: I've read messages from people who seem to think that not having a "save" or "save as" function was a brilliant stroke of genius. OK, so this question goes out to those people. If it is so brilliant then please explain to me how I can recover my last twenty hours of work? If there had been a "save" function I would have been saving my project all along the way and I would only have lost the last half an hour or so and not the entire 20 hours.
So, tell me. Precisely. Step-by-step. How do I recover my work.

Need help with lost iMovie project.

I was creating an iMovie project for school and needed to save it on a USB, so I clicked on 'Export Movie' from the 'Share' options menu in iMovie. I chose the type I wanted it saved in (viewing for computers) and then a smaller screen in iMovie popped up saying it was exporting the movie, or something like that. It took about a good 30 minutes and my project was a 7 minute movie with film clips, music, transitions, ect. I exported this project to my USB but when it finished it wasn't on there and when I finally found it on the Mac somewhere, I went to drag it into my USB but it said it was full. I then dragged the project onto my desktop and tried to open it to see if it worked. When I did the iMovie icon jumped once and stopped. I clicked on iMovie and it was still there in the projects screen. I then decided to close iMovie and open the project again from my desktop to see if it would play like a normal movie but once I clicked it the iMovie icon jumped again, opened but my project that I was trying to open was not there anymore and wouldn't open from my desktop file. I cannot open it at all and view it, it has been lost from my iMovie. Is there a way that I can get it back? Really need some help with this.

What version of iMovie are you using?
Matt

I have produced several short iMovie projects and want to link them into a continuous stream on a DVD. Can it be done? All of the projects are in my Moblie Me Gallery

I have produced several short (2 to 3 minute) iMovie projects and want to link them in a continuous stream on a DVD. The clips are in my Mobile Me gallery. How can it be done?

You can do that too, it's all in the iDVD program.
But first you want to assemble the separate clips into one big long clip. For that you would use iMovie. Share to the Media Browser (choose the Large size). Let it export then quit iMovie.
Open iDVD, click on the Media button and then the Movies button. Under the iMovie star icon you will see your final assembled clips movie. In the iDVD project window turn on the map view (it's little boxes that look like a flowchart) then drag the iMovie project into the first box:
You can set the project to startup without a Menu, and then loop continuously as well. Go up to the Advanced Menu then click on the Loop movie option to turn it on.
Once checked the Loop movie status will appear as curved arrow icon in the Project Window:
In the lower right corner is the icon indicating this video clip will loop while being played.

How do I include the photos in a imovie project to the finished dvd so the users can have access to them?

I've included alot of old photos in an iMovie project and would like to include them on the finished DVD I create with iDVD. I woud like the users to be able to have access to them so they can print them, store them on their own computer or whatever they would like to do. How would I do this?

You do this by creating a DVD-ROM section on your DVD. See this explanation from iDVD Help.
Adding files to the DVD-ROM portion of a disc
You can let viewers copy files directly from your DVD by adding the files to the DVD-ROM portion of the disc. These files are burned onto the DVD and are accessible when the disc is viewed on either a Windows PC or a Macintosh computer, but not a DVD player.
You can add any kind of file to the disc. For example, if your disc contains a slideshow, you can add the image files to the DVD-ROM portion of the disc so viewers can download them to their own computers and print them. You can also add a file containing your movie production notes and other “extras.”
To manually add files to the DVD-ROM part of your disc:
Choose Advanced > Edit DVD-ROM Contents.
The DVD-ROM Contents window opens.
Click Add Files, or click New Folder first if you want to create a folder to put the files in.
Browse to select your files or folders, then click Open to add them to the disc.
You can also drag files directly to the DVD-ROM Contents window. When you are done, just close the window.
When you add a file to the DVD-ROM portion of your disc, before you burn the disc the project contains just a reference to the location of the file on your hard disk, not the actual file. So if you delete a file from your computer or move it from its location after adding it to the DVD-ROM contents, you get a “File not found” message when you try to burn your disc. You can either remove these missing files from the DVD-ROM contents or find them on your computer and put them back in the original location so iDVD can access them.
As you add files to the DVD-ROM contents, be sure to check the DVD Capacity meter in the Project Info window to find out how many gigabytes of disc space are being used. The Capacity meter shows the disc space taken up by the video portion of the disc as well as the DVD-ROM portion.

How can I hardwire transfer an iMovie project to another iPad

Using a hardwire connection (and not iCloud or Airdrop) is there a way to transfer an iPad iMovie project directly from one iPad to another iPad so that the editing can continue on the second iPad?
I can't use any wireless or bluetooth connection and I don't want to go through my laptop iTunes app as a middle man. How can I marry those two iPads and get that iMovie Project from one to the other without a wireless connection.
Thanks Steve

There is no way to connect two iPads to each other through a cable. Everything would have to be wireless or you would have to use iTunes to move data around.
What you wish to do is not possible.
~Lyssa

Can I move an ongoing imovie project from my mac to another mac?

I would like to move my ongoing imovie project from one mac to another and then continue working with the project. Is this possible? If it is, how do I do?
/Caro

You will need an external hard drive that is formatted as Mac OS Extended (Journaled).
Then you will move the Project to the external hard drive from within iMovie.
See here for instructions. http://help.apple.com/imovie/#move7d66613
Then you will use the File/Consoldate Media command to move everything else.
See here for instructions. http://help.apple.com/imovie/#mov3ac6c7c9
You can edit on the new Mac from the external drive, but if you prefer, you can move everything to the new Mac by using the same instructions above.

What is the easiest way to transfer a large imovie project from one computer to another in a different location.

What is the easiest way to transfer an faairly large HD imovie project from one computer to another in a different location. Can you export to drop box? Will the other computer need the exact imovie version?

OK it depends.
If you have a finished movie, you can SHARE/EXPORT MOVIE and create your final movie. Then, depending on the size of the finished movie, you can transfer via dropbox or similar service. Ninety minutes is a very long movie for iMovie, but it may work for you. I would suggest 720P to keep the size down.
If you need to transfer the entire iMovie Project so it can be edited in iMovie at the other end, then you need to transfer the project and event assets to an external hard drive and get the hard drive to the other location.
Directions are here. Follow the directions for 1) Moving or copying Project to external drive. Then 2) Consolidate Media.
https://discussions.apple.com/docs/DOC-4141

IMovie Projects

Similar Messages

Maybe you are looking for