IMovie rendering error -50

I want to export my movie with iMovie and it always shows the rendering error -50. How can i fix it?

I experienced the same error, but I solved it.
There are several threads in this community about error -50 in iMovie. Some people seem to have had success by removing very short clips from their iMovie project. This is not what worked for me.
Even though I got the error message and the export of the movie stopped, there was a movie file in the output folder which I could watch until a certain point. I took a closer look at the point where the export obviously failed and stopped. When reviewing this clip in iMovie frame by frame, I noticed that there was a glitch which was one frame long only! In my case, it was a blank green screen. After removing that single frame, the export worked. No error message. I had to remove two green frames in total in a movie which consisted of about 50 single .3gp clips, by the way.

Similar Messages

  • The newest iMovie rendering error -50

    how to fix?

    This usually means you have a corrupted clip somewhere in your timeline.
    See:  https://discussions.apple.com/thread/6238559?tstart=0
    Geoff.

  • Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...

    Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...   OSX10.9.2, iMovie 10.0.3, Toshiba externals 2TB etc

    Hi Babowa and Apple:
    Thanks for helping me.   Here is my workflow:
    I store any file that I save onto my external drives so that I don't fill up my main hard drive.....( I label each external hard drive by year + alpha, such as 14a, 14b etc.)  Is that a problem?   Any suggestions?
    I know iMovie works from the main iMac HD and therefore needs to find the file that I want in the external drive, such as when I "import" a file from an external such as 14a into iMovie that has been previously downloaded onto the external 14a (I download all SD cards & tapes to externals)......and it sounds like you're saying that is causing iMovie problems because the file is not so easily accessible for iMovie?
    I assume that iMovie processes the file that I have "imported" into an "iMovie Event" on my iMac HD.  I label that version as say "NLGE 3000E" for my 3000th movie, Event version, "events" that is always rough.
    After I have imported media as an event and have labeled an event, "NLGE 3000E,"  then I go to "new movie" that I assume is a "project".....and I label that version "NLGE 3000P1"...."P" for "project" and "1" for the first edition....also to help me keep track of where my movies go.   I focus on "Projects" then when editing ...and watch which edition I am editing and which edition appears where.
    I learned that I need to "share" all movies from "Projects" to save......and store my final versions on my external drive, 14a (eg) so that I am sure that I have a retrievable copy.   I try to share to YouTube from iMovie and succeeded 1/10 tries.
    Evidently a movie is not saved unless it is in "theater"?
    Please see next "reply" for other comments about retrieval.
    Thanks.

  • Imovie 10 wont let me share my videos over 3-4 minutes , youtube is ok but when i try a video of about 90  minutes i hit share and after about 10 mins i get the message box "video rendering error: -50 share failed please help!

    I uploaded the new Imovie 10 and cannot share videos,after about 10 mins I get the message "Share failed Video rendering error :-50", please help!

    I am getting the same problem. Downloaded Maverick and the new iMovie 10.0.1 and It will only upload 10 minutes of a 65 minute video then I get the rendering error 50 each time tried to export to desktop, to thumbdrive, to youtube. No luck.  any suggestions Apple?

  • Can't share iMovie. Getting the following error: Video rendering error: -50

    Created a movie in iMovie and it won't let me share it (no matter how I try to share it). I'm getting the following error each time: Video rendering error: -50

    I select a book to read from my library it takes me to digital editions and this message comes up. Has been working for a couple of years but something has happened, maybe I did it but don't and to make it worse there is no one to contact to fix it. Get the following message. "Error getting license server communication problem MW_ADEPT_CORE_EXPIRED" I

  • Video rendering error -50 iMovie version 10.0.6

    Every time I try to share my project, it says "Video Rendering failed" or something and when I click on details it says "Video Rendering Error : -50". I have the newest version of iMovie version 10.0.6 and i need to know how to fix this. Thank you!

    I'm having same problem. I have upgraded to Yosemite since I edited. Last version or OS never had this problem.

  • HT5622 I have created a trailer using iMovie, iMovie won't let me share, Video rendering error: 2

    I have created a trailer using iMovie, iMovie won't let me share, Video rendering error: 2
    The share operation "File" has failed.
    imovie 10.0.1

    afterwards it worked fine?
    or do i need also to change the titels in my project to english?
    thaks

  • Imovie for osx 10.9.4  Rendering Error Can't share!!

    I Can't Share My Movie at All... Not matter what I do, it give the same error!!  Rendering Error -50
    What can I Do???

    Try scanning FROM your Mac. Use Image Capture app in your Applications folder.
    Click once on the scanner on the left side, then click on Show Details along the bottom. Along the right side you will see LOTS of options for scanning and saving.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I'm getting Video rendering error: -50 and can't load my videos to youtube, or in a file.

    I can't share any video anywhere and am getting this error message:
    Video rendering error: -50
    Any help?
    I'm using iMovie.

    Have you tried to export Master File and use Compressor to encode. There are presets there ?

  • What is video rendering error: -50

    When trying to "Share" my movie in iMovie 10.0.1 I receive the following error.
    The share operation "File" has failed
    Video rendering error: -50
    This occurs no matter how I try to share it (Theater, itunes, file, etc.) or output resolution. Does anyone know what this means or more importantly how to fix it?

    You are not the only one with this problem. Seems like a bug in iMovie.
    https://discussions.apple.com/message/24498709#24498709

  • Video Rendering Error -50

    When ever I try to share my video off of iMovie it says "The share operation has failed, video rendering error -50" I have tried to search up on how to fix this and have found nothing. I am using the latest software update and have iMovie updated. Also I am using Quicktime player which is also up to date. But also even though it says it has failed it puts a 15 second version of my clip on my desktop (only the first 15 seconds of the video) I am not sure if it has to do with any of my settings but I can still not find to how to fix this.

    same problem, don't know how to solve it...

  • SSRS 2008 R2 rendering error when executing a report

    The value '1' is invalid. Valid values are between '0' and '1'. (rrRenderingError)
    I am receiving the above error when running the report in SSRS 2008 R2. It has run find in the 2005 version. After research, I read that this issue caused by tablix split on a new page or something. However, I have not found anything to be the resolution. I
    installed the latest hotfix that I thought addressed this issue but still not working. Any suggestions outside of touching the report?Sonya

    The value '1' is invalid. Valid values are between '0' and '1'. (rrRenderingError)
    I am receiving the above error when running the report in SSRS 2008 R2. It has run find in the 2005 version. After research, I read that this issue caused by tablix split on a new page or something. However, I have not found anything to be the resolution. I
    installed the latest hotfix that I thought addressed this issue but still not working. Any suggestions outside of touching the report?
    Sonya
    We too are encountering this problem with reports migrated from 2005 to 2008. We are getting the rendering error only when trying to use the paging controls to navigate forward through the report. This is on SSRS 2008 R2 running SharePoint Integration. When
    the result set is empty we get the tablix errors mentioned instead. The reports ran fine prior to migration to SSRS2008.

  • Rendering error while writing to file...Quicktime

    Hi all,
    I am brand new here and have an urgent question. I have been getting an error in After Effects CS6 whenever I try to render to a quicktime movie that says "Rendering error while writing to file...An output module failed. The file may be damaged or corrupted."
    I have spent days trying to fix this and I have read other peoples posts with the same question but I have cleared my disk cache and reinstalled quicktime without success.
    Any help would be great I am not super technology advanced so try to keep it simple if you can.
    Computer Specs:
    750gb Hard Drive
    8gb Ram
    Intel Core i5
    Nvidia Geforce GTX 660M graphics

    Start by going through all of the troubleshooting suggestions here:
    http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
    If you need additional help, please provide answers to all of the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

  • Portal rendering errors using IE10

    Hi,
    We've recently patched all of our SAP systems (portal and backend) and checked we're at the requisite level for IE10 support in the PAM.
    We're currently in the process of testing all of our applications for IE10 compliance and have identified two issues which someone may have experienced or can advise upon:
    Issue 1) SAP Transaction iView (ITS) raising following error in popup dialog box 'The application was stopped due to a critical rendering error.  The IE compatibility view is not supported (Note 1586993).'
    This iView connects from our portal (EP 7.0 EHP2 SP14) to a backend SAP ERP (ECC) system patched to NW EHP3 (SP09).
    Note 1586993 is not particularly helpful as it simply states 'The administrator must assure, that IE frame content is compatible and correctly configured'.
    Additional research identified note 1970427 which I have applied to the backend system - subsequently I added application parameter 'sap-ie=EmulateIE8' to the iView (both within the iView config and at runtime) but this made no difference to the behaviour.
    I checked the user's framework page and the 'Browser Document Mode' iView is linked in and has it's property set to 'IE=EmulateIE7'.  I tried moving this iView further up the order sequence (i.e. putting it first) as well as changing it's setting to 'IE=EmulateIE8' but once again this had no effect on the behaviour.
    I notice when logging into the portal, at first the F12 console shows Browser Mode = 'IE10', Document Mode = 'IE5 quirks' but when the problematic iView renders, the Document Mode changes to 'Quirks' which I'm assuming is why the error occurs.
    I'm not sure what I can do to make the iView render in 'IE5 quirks' mode?
    This iView is called dynamically at runtime with some URL parameters that are passed to the backend transaction so I cannot follow the advice in note 1590563.
    Issue 2) BSP iView for 'CRM Web Interaction Centre' - all F4 dialog popups are displaying empty with no content, e.g. Inbox search help for classification field
    This iView connects from our portal (EP 7.0 EHP2 SP14) to a backend SAP CRM system patched to NW EHP2 (SP04).
    I tried setting my user parameter CRM_THTMLB_IE_COMP to 'IE8' but this had no effect.
    Note, if I set the IE10 property 'Display intranet sites in Compatibility View' both issues above are resolved.  We're trying to avoid this as we've had this setting in place for a number of years and it affects the correct operation of non-SAP applications.  Given there are numerous ways of making SAP operate by emulating older compatible IE versions, I expected we could work around needing to do this but it may be a last resort.
    Please offer any advice you can as it will be much appreciated.
    Thanks,
    Alan

    Hi Lawrence,
    We have a mixture of custom and SAP standard portal applications developed over the past 10 years.
    UI technologies include: Java Server Pages, Web Dynpro Java, ITS, BSP, Web Dynpro ABAP and BEx.
    Quite honestly, the portal hasn't proved to be the best SAP product in our experience, and we've tried hard to keep it patched up-to-date. OK, it offers integration and navigation but that capability is offered by the Fiori Launchpad, albeit presenting new challenges and possibly some limitations on the integration of existing applications.
    We could have opted to integrate the Fiori Launchpad with the portal but decided it was cleaner to perform a standalone installation on our newly built NetWeaver Gateway server.
    We're starting our Fiori journey by implementing selected SAP delivered apps for the first pilot projects then plan to replace or migrate existing portal applications.
    We'll replace any custom Java apps with UI5 apps built in-house as we need to rationalise UI technologies and this one is a prime candidate given the lack of in-house skills and SAP direction. 
    Our expenses application is currently an SAP ITS transaction iView in the portal but will be replaced with the My Travel and Expenses Fiori app this year.
    CRM Transaction Launch isn't used often so we may kill it off.
    BSP's are solely in the CRM area and I read they're not supported yet in the launchpad - hopefully they will be in a future version (?).
    We have quite a few Web Dynpro ABAP applications so these will take some time to rewrite if required (assuming we cannot port them).
    BEx may be replaced with Business Objects or taken out of the portal in favour of the Excel version we also run (portal offers little value for massive reports so users download to Excel in any case).
    My understanding is that the Fiori Launchpad does support integration of legacy SAP technologies so we'll need to gauge if and when we each a tipping point where any remaining portal applications can either be integrated with the launchpad or replaced with alternative new applications. Obviously all of the above will take time.
    We're working on developing a custom Fiori/UI5 theme and have hit a few snags. We've just patched to SP09 on our development Gateway system but the UI Theme Designer is still a bit flaky (we run the tool there but could also do this on our portal). My colleague is now trying the cloud version to see if that proves a more viable route. In either case we'll be seeking SAP assistance as we really want our UI5 apps to adopt recently developed corporate branding rules. Our portal currently uses a copy of Gold Reflection with simply the SAP logo replaced for our company's logo.
    If you have any further queries just let me know, or similarly advice/experience on the above.
    Hope this helps.
    Alan

  • Rendering Error: CS6 Quicktime crash- error  (-1610153464)

    Hello,
    My employer recently purchased Adobe Suite CS6. I mainly Use After Effects for my job. I have been getting the following error whenever I attempt to render into Quicktime format.:
    "After Effects error: Rendering error while writing to file "C:\Users\User1\Desktop\File_Name.mov". An output module failed. The file may be damaged or corrupted. (-1610153464)"
    I have searched for solutions to this online. Rebooted my machine after reinstalling the latest Quicktime; deleted queued renders; made sure to switch the compatibility for "AfterFX.exe" to Windows 7. I have also grabbed any recent updates.
    One of our clients has asked for files to be delivered in Quicktime format. It would be nice to find a resolution for this issue soon. Thanks for any aguidance with this issue in advance.
    I will be glad to provide any machine specs if necessary.

    Don't worry, K-Lite did not cause this problem. Dave just likes to blindly blame K-Lite for every problem on earth. This is a QuickTime problem as obvious by the error itself and also by the fact that DaftlyPunkish is getting the same error on MacOS.
    Try this
    1) Uninstall QuickTime
    2) Search the Windows ProgramData folders for left-over QT files such as quicktimepreferences.qtp and remove them.
    3) Install QuickTime
    4) Make sure that AE and QT are not blocked by your firewall. Test with your firewall completely disabled.

Maybe you are looking for

  • Is it possible to unlock a disabled ipad without wiping it clean

    Is it possible to unlock a disabled IPad without wiping it clean?

  • Excise Report RG23APart-2

    Hi all, When running RG23A Part-2 report using XL reporter ,in others field of Tax i.e. Hcess Duty Value is not comming on report . Other duties like BED Ecess values are coming.... How to solve this error. Thanks, Neetu

  • Un register and register database again in the same catalog

    Dear All, I've a requirement to Un-register the existing database from the catalog by removing all its information, and immediately registering the same database in the same catalog. Please advice How to unregister and register again by retaining the

  • Dynamic Query in Loop

    My objective is similar as follows - declare v varchar2(100) := 'Select sysdate from dual'; begin for rec in (v) loop message(rec.sysdate); end loop; end; The above statements returns the following error - Encountered the Symbol - LOOP when expecting

  • Could not restart  one node in 4 nodes rac server

    Hi Experts, we have 4 nodes oracle11.1 with ASM in Red hat. After reboot node2 sale2 server. I found all application is offline by crs_stat -t-v ora....SM2.asm application 0/5 0/0 ONLINE OFFLINE ora....DA.lsnr application 0/5 0/0 ONLINE OFFLINE ora..