IMovie searching for files for project that does not exist...

Whenever I fire up iMovie 09 on Lion, it spins, and then tells me it can't find a video file for a project that does not exist. That is, it says 'File xxx.mov from project 'Movie 1 cannot be found - without this file the movie cannot be played.' The project is one I deleted a long time ago, and does not appear in the project list. How can I force iMovie to forget about this?
Thanks!
PS the specific error is 'Searching for movie data in file "New Project 1 - Large.m4v". The only button is "Stop". so I press that, then a new dialogue box saying 'The movie file 'New Project Large.m4v" cannot be found. Without this file, the movie cannot play properly." It has cancel and search buttons. Obviously, searching doesn't help - it was deleted a long time ago. Cancelling makes it go away until iMovie is launched again.

Whitecity,
This is awesome.
So moving forward from here, you can narrow down which event is causing the behavior but systematically trial and error. Once you determined the exact event folder, there are subfolders underneath:
/iMovie Movie Cache/
/iMovie Stabilization/
/iMovie Thumbnails/
Try removing these to see if iMovie rebuilds them.
Calbe

Similar Messages

How to delete an iCloud account and turnoff Find my Phone for a email address that does not exist

I have switched my itunes account to a new email address but the iCloud account is still registered to the old email account which I can no longer access.
If I go to Settings>iCloud it requests my Apple ID password for the old email account but as this account does not exsist it does not accept the "old" password. it will not let me delete the account without turning off the Find My Phone app which aslo needs the old password.
A related probelm is none of my apps will update as they are on the old account hence the need to delete the iCloud email account and create the new iCloud with the new email sign on address.

If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address (you won't need to verify it) and save the change. You should now be able to use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID. After turning it off you can delete the account, go back change your ID back to the way it was again.

A pool operation was specified for a pooled resource that does not belong t

hi i left the server running for days so my application was running i refresh the page by clicking the ok button in small popup box,the page was refresh but when i what to select my lov am geting this error
A pool operation was specified for a pooled resource that does not belong to the resource pool.
Error
java.lang.NullPointerException
Caused by: java.lang.NullPointerException
     at oracle.adf.model.binding.DCIteratorBinding.initSourceRSI(DCIteratorBinding.java:1797)
     at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1672)
     ... 187 more
## Detail 0 ##
java.lang.NullPointerException
     at oracle.adf.model.binding.DCIteratorBinding.initSourceRSI(DCIteratorBinding.java:1797)
     at oracle.adf.model.binding.DCIteratorBinding.callInitSourceRSI(DCIteratorBinding.java:1672)
     at oracle.adf.model.binding.DCIteratorBinding.internalGetRowSetIterator(DCIteratorBinding.java:1645)
     at oracle.adf.model.binding.DCIteratorBinding.getRowSetIterator(DCIteratorBinding.java:1607)
     at oracle.jbo.uicli.binding.JUCtrlListBinding.setupListItems(JUCtrlListBinding.java:725)
     at oracle.jbo.uicli.binding.JUCtrlListBinding.getDisplayData(JUCtrlListBinding.java:3586)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding$1.size(FacesCtrlListBinding.java:382)
     at java.util.AbstractList$Itr.hasNext(AbstractList.java:339)
     at oracle.adfinternal.view.faces.renderkit.rich.SelectItemUtils.addSelectItems(SelectItemUtils.java:207)
     at oracle.adfinternal.view.faces.renderkit.rich.SelectItemUtils.getSelectItems(SelectItemUtils.java:78)
     at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectOneChoiceRenderer.getSelectItems(SimpleSelectOneChoiceRenderer.java:98)
     at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectBaseRenderer._renderContent(SimpleSelectBaseRenderer.java:208)
     at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectBaseRenderer.renderElementContent(SimpleSelectBaseRenderer.java:122)
     at oracle.adfinternal.view.faces.renderkit.rich.FormInputRenderer.encodeAllAsElement(FormInputRenderer.java:152)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:769)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:1140)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeMiddlePanes(PanelStretchLayoutRenderer.java:348)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:313)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adf.view.rich.render.RichRenderer.encodeStretchedChild(RichRenderer.java:2004)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer._renderPane(PanelSplitterRenderer.java:1360)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer.encodeAll(PanelSplitterRenderer.java:279)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)my lov is empty,but where i restart Instance IntegratedWebLogicServer all is fine what cause this error
Edited by: adf009 on 2013/04/03 9:28 AM
Edited by: adf009 on 2013/04/03 1:13 PM

Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) it gets through.

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally gets through.

Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation.

My IPhone is asking me to type in my password for my old Apple ID that does not exist anymore. I cant set up ICloud without typing in a password to a Apple ID that does not exist, so do I have to remove everything from my IPhone and start over?

my IPhone is asking me to type in my password for my old Apple ID that does not exist anymore. I cant set up ICloud without typing in a password to a Apple ID that does not exist, so do I have to remove everything from my IPhone and start over?

Hello miamat2017
You should see an option to skip that step and then sign out of it when looking in Settings. Check out the article below for more information.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G.

Cannot get into iPad, it keeps wanting me to sign in using old email that does not exist, and for a password that she does not remember, so I am unable to change password. How do I get around this?

Cannot get into old iPad, it keeps wanting me to sign in using old email id that does not exist, and for a password that she does not remember, so I am unable to change password. How do I get around this?

With iOS 7 Activation lock you can't.
iCloud: Activation Lock
http://support.apple.com/kb/PH13695
 Cheers, Tom

Why is the Apple App Store is asking for a password to an apple ID that does not exist

Why does the App Store ask me for a password to an Apple ID that does not exist?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622

Status row for item '', activity ID '264766' does not exist.

I have developed a custom workflow which is AME configured. The workflow runs well in R12.1.2 instance. But when deployed to R12.1.3 it fails out.
error starting at line 20 in command:
exec XX_PACKAGE.XX_PROCEDURE(19098, 'XX_WF', '1:Yes;')
Error report:
ORA-01086: savepoint 'WF_SAVEPOINT' never established in this session or is invalid
ORA-20002: 3101: Status row for item '', activity ID '264766' does not exist.
ORA-06512: at "APPS.WF_ENGINE", line 4192
ORA-06512: at "APPS.XXIFMIS_ICX_UTILS", line 20
ORA-06512: at line 1
01086. 00000 - "savepoint '%s' never established"
*Cause: Trying to roll back to a save point that was never established.
*Action:
Could anyone suggest how I can debug this issue.

Sosa,
When i run the wfstat nothing wrong in the info. unable to find the issue.
But, i have narrow down the issue. In the function process in my workfow i am calling a custom function called update_approval_status_new.
In this the value of the respond notification to be updated to a header table of this workflow and insert into events tables.
When i comment these two dml ( update to header status & insert into events ) there is no error.
Can any one tells me can i update and insert custom tables in workflow or not. If I want to do this, what is procedure.
Regards/Prasanth

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

Line 1 Error - Value 120 for the flexfield segment Company does not exist

{color:#0000ff}Receiving the following error message in the "Submit Expense Report - Expense Allocation" page:
"Error : Line 1 Error - Value 120 for the flexfield segment Company does not exist in the value set XX_GL_COMPANY"
This error message is shown when the user is entering the expense report in R12 Oracle Internet Expenses responsibility. After the user has finished entering the expense lines and after the user has reviewed the default expense allocation values in the expense allocation page, upon clicking on the next button , this error message is shown.
Has anybody experienced this issue?
We have opened a Service Request with Oracle but so far there is no resolution. This issue occurs intermittently. It is NOT consistent. We have advised the user base with the following workarounds to over this bug:
1. The system administrator shall clear the cache using Functional Administrator responsonsibility
OR
2. Advise the application user to sign-off from Oracle Applications and allow 5 minutes before they sign-in again.
Any help or advise in the matter is appreciated.
Thank you.
{color}

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

Production scheduling profile for production order type 10 does not exist – SAP Message No.10085

When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.

Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar

For object RF_BELEG number range does not exist

Hi,
while doing PGI, i get an error For Object RF_BELEG ,number range does not exist in company code ABCD. Where do i create the number range for this. I tried with FBN1 but not useful.
" Diagnosis says, the database table NRIV has the delivery class as C. Make chages in customizing. "
what could be the reason for this error? can anyone help me to fix this error.
i tried to fix it through transaction code 'SNRO' and 'OBA7' but in vain
can anyone help me out

Try Extending the same in VN01 , and assigning it to your relevant document
Cheers

M8 140 Acct assgt 01 for order item 45041838 00003 does not exist

Hi experts,
when i am trying to create invoice from BAPI_INCOMINGINVOICE_CREATE ii am getting the following error meesage for multi account assignment for non service based invoice ,service items.
error message: M8 140 Acct assgt 01 for order item 45041838 00003 does not exist
Please advice
Thanks & Regards,
Narasimha

Hi,
Please check the SAP note number : 810917.
Regards,

The list of workflow actions on the server references an assembly that does not exist

Hi,
This issue has been discussed many times in this forum , the reason why I am posting is I tried the resolution steps but I dont see any luck.
I am getting the below message from the SharePoint designer 2007 when I am trying to modify a workflow
"This list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly strong name is Microsoft.SharePoint.WorkflowActions, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
Contact your server administrator for more information."
#1 : One of the post says "Normally you would see that error because someone has extended the Workflow actions available in SPD with a custom action developed in Visual Studio. These custom actions are loaded when your workstation reads the WSS.ACTIONS
file on the server. The file is located in the 12 hive under Template\1033\workflow. Your WSS.Actions file contains a reference to a custom action .dll which is not available on the server."
I opened the WSS.Actions file in notepad, I dont see any line with *.dll in it. Am I missing something?
#2: Another post says "The solution I discovered was that the server running my SharePoint Services was not up to .NET 3.0. As soon as I updated to .NET 3.0 everything worked.I had made sure the machine running SharePoint Designer was updated, but
had missed the SHarePoint Services server."
The server is already updated to .Net 3.0.
#3: I went to the %System Drive%\Documents and Settings\Local Settings\ApplicationData\Microsoft\SharePointDesigner.
Deleted the ProxyAssemblyCache folder but no luck.
Just checking if any one was able to resolve this issue by following any of the solution other than the above mentioned ones.
Thanks,
Cutloo

    I have the similar issue with my custom work flow. I have searched the whole day for the solution but no success, then at last a simple track works for me. Please try this if any one faces such issue.
Basically the assembly that we have define in the ACTIONS file dose not exists on the server, because of two reasons, either we have given the wrong assembly name (in our case the namespace name inside our solution) or the PublicKeyToken may differ from the
original assembly, that are deployed in GAC.
    So cross check both of these, in my case the assembly name was fine,
<Action
    Name="Move Item to Another List and Send Email"
    ClassName="MyAssemblyName.Classname"
    Assembly="MyAssemblyName,Version=1.0.0.0, Culture=neutral, PublicKeyToken=4053d1fde8a1c781"
    AppliesTo="all"
    Category="Email actions">
But the problem was in the 'PublicKeyToken', so i double click on the feature inside my solution,then in the bottom i have clicked on the manifest tab to check the entries.
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" Title="MyAssemblyName Feature1" Id="f7f1bda0-5f65-40f1-a705-f6f15a41da3a" ReceiverAssembly="MyAssemblyName, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0c32dbb769ed64b5"
ReceiverClass="MyAssemblyName.Features.Feature1.Feature1EventReceiver" Scope="WebApplication"></Feature>
Here i got the actual PublicKeyToken for my assembly (0c32dbb769ed64b5), i have replaced this number inside ACTIONS file, deploy the soultion, reset IIS.
It works for me,

Error in file receiver adapter (Directory does not exist / cannot be create

I have a NFS reiceiver file NFS adapter with target directory:
10.128.68.38\arbo2000\UploadPinfos\arbodev
if I run this line in windows, windows access to this folder.
Full Error log:
Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
Configured at 2006-04-06 18:08:26 CEST
History:
- 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
Can somebody help me please??

Hi Alvaro,
If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
Cheers
JK

IMovie searching for files for project that does not exist...

Similar Messages

Maybe you are looking for