Imovie slow motion

i was wondering if there is a feature in the latest imovie that allows you to make some specific points in the movie "slow motion". thanks.

I, too, started searching for video effects in iMovie 8 to add slow motion. There is no way to do this in iM8. However, after reading other posts in this discussion I decided to go back to iM6. That's when the light bulb turned on...
I exported the video from my iM8 project, imported the same clip into iM6, added the slow motion then exported in DV quality to import in iM8. It worked!! Yes, I know it's a long way around but it got the job done.
I should mention that it is not obvious how to go about exporting an original DV video from iM8 so here are the steps I followed:
1) Select the video clips
2) Select Share->Export Using Quicktime
3) Click on "Options..."
4) Select Video Settings
5) Select Compression Type ->DV/DVCPRO NTSC (or PAL)
6) Set Compressor Quality to High
7) Click OK
8) Name and save your video clip then modify it in iM6
After you modify it in iM6 drag into the Event Library over the project you wish to add it to.
Good luck.

Similar Messages

  • Can't get to imovie slow motion...

    hi
    so i understand that in this version of imovie you're meant to double click a clip in order to bring up the "inspector" that can allow me to speed up/slow down clips etc.
    but, when i double click, all the clip does is play. forgive me for being incredibly stupid, but it's bugging the **** out of me.
    any tips?
    thanks

    so i understand that in this version of imovie you're meant to double click a clip in order to bring up the "inspector" that can allow me to speed up/slow down clips etc.
    Re-check the iMovie version. iMovie '08 has no "built-in" motion effects. If you are referring to a video tutorial, it is probably depicting how to apply speed changes in iMovie '09 which has yet to be released.

  • How can I make slow motion work in iMovie 10.0.2?

    Is there a way to make effects such as slow motion work in iMovie 10.0.2 (OSX 10.9.2)? In Modify drop down, Slow Motion is black, but the speed options are grayed out. Same with Fast Forward, Instant Replay, and Rewind. Anyone know why some capabilities were delted with the new versions of iMovie?

    Jim,
    The menu options (slo mo, fast wd, instant replay, rewind) are black; however, once I select one of these, all the speed options are gray and ineffective. Right click of a clip does not have a "show speed editor." And I am working in the timeline and not the event browser. Any other suggestions? Do we both have the same version (10.0.2)?
    Thanks

  • I imported video from a card into IPhoto and it plays in slow motion.  Any suggestions? Would importing into IMovie help at all?

    Hello
    I am importing video and pics into Iphoto and the video plays in slow motion.  Would importing in Imovie help or does it have something to do with the type of camera or file the video is in?

    It should. So they aren't shown in the Last Import smart album, right? Try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
    OT

  • Imovie 08 - Slow motion effect

    I have looked through the video and PDF tutorials and cannot see how to put my clips into slow motion. This is addressed in the tutorials for earlier IMovie editions (i.e, Lesson 4 - Motion Effects), but I can't find anything in the video tutorial that addresses this for 08. Clicking and dragging the clip's duration doesn't work.

    the actual version of iM08 has no effects anymore..
    for 'elaborated' projects, use iMHD6, you get it as iM08-owner for free here: http://www.apple.com/support/downloads/imovieHD6.html
    or, for excellent slow-mo, use a free 3rd party app, discribed on my site:
    http://karsten.schluter.googlepages.com/slowmowithim08
    or, if you want 'serious' movie making, consider the purchase of FCE4 ..

  • Slow motion problem publishing from imovie to idvd

    The problem is with publishing a film to idvd from imovie. The slow motion clips "glitch up" when viewed on idvd but run smoothly when viewed on imovie. The visual of the slow motion clip pauses as the audio continues. The movie picks up as normal after the slow motion scene ends. There is another point in the movie where a non-slow motion scene does the same thing (visual pauses and audio continues) until the end of the entire movie. The glitch stops before the credits (which is not filmed fottage). How do I fix this?

    hmmmm..I would double check the other clips. Other than that I am stumped. Maybe someone else will have some ideas.
    Also, once you changed to 25%, you need to re-SHARE the video. (If you haven't already)
    Message was edited by: AppleMan1958

  • Can i upgrade imovie 08 to something that does slow motion?

    can i upgrade imovie 08 to something that does slow motion?

    There is also a free app called JES Deinterlacer that can do slow or fast motion outside of iMovie 08.
    See this link to Karsten Schlüter's site.

  • I need to do slow motion, but i have imovie '08 and i cant figure it out. can anyone help???

    i cant figure out how to do slow motion in imovie '08 and people are saying that i need to get imovie '06 but i cant find it!!!     HELPPPP! i need slow mo!!!!!

    The free program JES Deinterlacer has a slow motion (or fast motion) feature. To use this program you will probably need to look at Help in the JES menu. In the window that opens, click on the Project tab. In the lower right you will see a box labelled "Movie speed". If you want half speed type in 0.5000 (representing 50%). For quarter speed use 0.2500, and so forth. For fast motion, 1.500 represents one and a half times speed and so on.
    In iMovie, right-click (or control-click) on the clip that you want to slow down, then select Reveal in Finder. In Finder, open the clip with JES and proceed from there (as I said, you may need to look at Help).
    The exported clip can then be reimported to your iMovie Event and used in your Project.
    JES Deinterlacer can be downloaded from the home page of the developer Jan E. Schotsman:
    http://www.xs4all.nl/~jeschot/home.html
    It is also downloadable from this Apple site (but it's an earlier version):
    http://www.apple.com/downloads/macosx/video/jesdeinterlacer.html
    John

  • How can slow-motion iphone6 video be exported to imovie on an iMac and retain its slow motion effect ?

    how can slow-motion iphone6 video be exported to imovie on an iMac and retain its slow motion effect ?

    thx, i can't see where you do that (access the function to slow the motion of a clip).  in the help file it says to 'right click' on the clip to access those functions but when i do i get these optios below (no motion, pan, zoom, pan and zoom).  i want access the speed/duration sliders.
    i would say the function isn't available at all, but i could be looking in the wrong place (although i have tried everything).
    thx for your reply.

  • IMovies 10.0.4: How do I get Slow Motion and Fast Forward (Speed Editor) to function?

    I am using iMovie 10.0.4 and cannot get fast-forward or slow-motion functions to work.  I have organized my clips into a Project and attempting to edit them in the Timeline.  With the target clip selected in Timeline, I am unable to access the fast-forward or slow motion functions in the menu bar nor by right-clicking to select the Speed Editor.  Example screenshot below.   Thanks for any help you can throw my way.

    Hi,
    I have this problem too.
    Do you have the issue only on new projects ?
    Do you still have an old project where you used slow motion ? if so, just duplicate the project and cleanup all clips from the new project and you have a clean empty project with working speed controls. It works for me.
    Let me know.
    I've created my own question about it because I didn't see yours at first.
                     iMovie 10.0.3 on OSX 10.9.4 speed controls disabled on new projects            

  • Imovie shakes on Slow motion and transitions

    Hi everyone, hope someone can help me.
    I recently went to a wedding and my mum video'd it. As part of the present for the bride and groom I wanted to get a nice song and put snippets of their day into a small video. I have used either cross-disolve or the other one (overwrite or something its called) in between the clips and I have also slowed one of the clips down to make it look like slow motion. On the computer this was fine and then I put it onto DVD and when I played it through the DVD the transitions and slow motion are really jerky as if its shaking. It doesnt do it all the way through, its really just at the beginning of the DVD and then it settles and the last 30 seconds or so are wonderful. Can anyone advise as to what to do?
    Thanking you in advance
    Tracey

    Tracey: Post your query under the iMovie topic category for probable better response.

  • Slow motion and iMovie 5

    I'm wanting to create a slow motion effect in iMovie 5.0.2. As we all know iMovie's slow motion effect is less than satisfactory (jerky). I've tried using JES Deinterlacer but have run into problems with it. In my research I've come across an iMovie plug-in sold by Partners in Rhyme that claims to create a smooth slow mo effect. Has any one had any experience with this plug-in and is it compatible with iMovie 5? You can see it here: http://www.partnersinrhyme.com/osx_software/TimeEffects1/TimeEffects1.shtml
    Thanks!
    1.8 GHz PowerPC G5   Mac OS X (10.4.8)  

    Hi jayfan:
    (I'm an Illini fan...) But, I will still answer you
    That plugin is actually one of many offered by Stupendous Software
    They are very reputable and it should work great with iMovie 5.
    :)Sue

  • I have a 2008 macbook and want a version of iMovie that can do slow motion, which one and how?

    I want to edit a short video for fun and the '08 version cant do slow motion. When i tried to get iMovie '11 or whatever it wouldnt let me because i don't have apple's newest laptops.
    i'm not buying a new laptop. what do? any suggestions on video editing software? No, i don't want to spend money on this really... i just want to tinker around with short videos.
    Thanks!

    Start here.

  • IMovie 08 - Creating Slow Motion

    I want to make a segment of my iMovie video into slow motion. I believe that there is a profcess that you have to put the clip through before it can be done. Can anyone help??? Thanks in advance.
    -MacPaige

    MacPaige wrote:
    I want to make a segment of my iMovie video into slow motion. I believe that there is a profcess that you have to put the clip through before it can be done. Can anyone help???
    maybe my old website can help you
    http://sites.google.com/site/karstenschluter/slowmowithim08

  • IMovie 11 quick time movie is in slow motion. why?

    Sharing using Quick Time to make HD movie. Movie comes out in slow motion, but audio sounds okay. Followed online suggestions for settings. Settings are as follows: PLEASE HELP!

    You don't say how the file was created for youtube. When you export a video from Flash you have a lot of options available to you. You can change the image area size, the frame rate, you can choose one of many video and audio compressors.
    As a start, you should keep the image area and the frame rate the same for the video as it was in the original Flash file. When the Adobe Media Encoder opens, your file will show up in the Queue section with a compressor and a preset selected. You can select the format and change it to anything that you want. Since the default format has given you a poor result, select a different format or customize the existing one. There are many, many, options available. Take a look at the Media Encoder documentation for more information on those options.

Maybe you are looking for

  • Not able to transmit Video

    Hi, I m new to JMF.We are using MjSIP and i want to transmit video through JMF to other machine.The problem is the implementation which is given in MjSIP isnt working . I mean whenever i execute the implementation given in mjSIP like JVisualReceiver

  • Trouble with call status remains 'In Process'

    Why status remains 'In Process' ? What is TermCallFor event ? Any reason why DestUnallocated event trigger even though agents are available at desired extension.

  • Can we display only sub totals on the alv grid output

    hi, can we display only the subtotals calculated on the grid display.it should display all the data it shpuld display only the subtotals of it. if yes can any one please give me the code for will be awarded with points.

  • User/library folder moved

    The Problem is that my library folder accidentally is moved. Then mac os x made a new Library Folder. The strange think is that i can't move that folder or overwrite it with my original library folder. So how did it move in the first place? How can i

  • How to use multipule join in update stmt

    hi, i have a query in mssql i want to translate it using oracle 11g r2 latest sysntex UPDATE trips SET locations = trips.city + ', ' + poi.city FROM trips INNER JOIN poi ON poi.trip_guid = trips.guid where trips.trip_guid =1 UPDATE trips t SET locati