Imovie song does not start at the beginning after I edited the duration of the clip

my imovie song does not start at the begining after I edited the duration of my clips. The audio clip now starts in the middle of the song. This is occuring with the second song in my video. How do I adjust the audio to start at the beginning of the song.

For pop ups. From your Safari menu bar click Safari > Preferences then select the Security tab.
Select: Block pop-up windows
safari starts always with top page even I have apple.com as a starting window
Back to Safari > Preferences. This time select the General tab. You can reset your homepage from there.
history its not saving or at least not showing when i press the thingy that looks like a little book on the tools bar
That icon represents your Bookmarks not history.
To view history, from your Safari menu bar click History > Show History
Or Option + Command + 2 on your keyboard.

Similar Messages

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe

My computer does not start up right away after I close the top... Is my hard drive going bad? Help please!

I typically just close my computer when I'm done with it, instead of putting it to sleep or logging off. Recently, when I open it back up, it does not start right away. I have to press the power button half a dozen times before it starts. HELP!!

annie1977-
Greetings and welcome.
Try booting from the system install CD/DVD by putting the disk in the drive and starting up while holding down the c key.
After boot-up find the Disk Utility, either on the desktop or under the Apple menu. Select your startup drive and the repair permissions on that drive. See if that helps.
Luck-
-DaddyPaycheck

My firefox does not start even though i created a new profile.What is the solution?

My firefox does not start and when i debug, its showing a win32 exception error. what should i do?

See:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
You can also update to Firefox 9.0.1
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html

Firefox does not start in Windows Vista. It can be seen in the task manager that the process is running. But nothing happens. After deleting the process it still does not work.

Are there any issues with Firefox 10 and Vista? IE works.

Hi webero,
There are no Known Issues that I am aware of. You should take a look at [[Firefox is already running but is not responding]] and our article called [https://support.mozilla.org/en-US/kb/Firefox-not-start Firefox will not start].
Hopefully this helps!

My Blackberry does not start up, all I get is a red line through the battery

Hi this is my first Blackberry and seven months after purchace I phone stops working. All I get when I turn it on is a red line through the battery. I bought a new battery and the same thing. I am like at wits end, HELP!

#1. Be patient with #2.
#2. Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
Message Edited by JSanders on 08-02-2009 11:18 PM
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Firefox does not start for very long after clicking!!If another browser is opened Firefox opens after that.

Firefox does not open after clicking on the Firefox icon on my desktop. Occasionally it opens after a very long time and that also a number of pages open at the same time equal to the number of times hat I clicked the icon trying to open. If I open another browser like Google Chrome after trying to open Firefox then Firefox follows it to open much quicker after Google chrome opens.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Why is it that my ipod does not sign in auto matically after it has been updated to the new ios 6.01 software?nothin seems to be working,its ridiculous.all my stuff has jus vanished.even the the icloud backup doesnt function.

is this the biggest **** baox ever?

You have given us no details about your problem so we cannot help.

Hi there, when i press the start button on my G4 twin processor, the light inside the button comes on until I let go when it goes back off and the machine does not start up. Any ideas?

Hi there, when i press the start button on my G4 twin processor, the light inside the button comes on until I let go when it goes back off and the machine does not start up. Any ideas?

Sounds a bit like the Power Supply, but...
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349
How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939

MacBook pro, will not start up- drive begins

MacBook pro, will not start up- drive begins?

OK, then try this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Since you can boot into safe mode successfully, I'm assuming the problem may be with a bad third-party extension or plug-in (such as a driver for third-party hardware or a bad Flash plug-in, for example.) It can also be a problem with a bad cache or preference file. If the above doesn't help then use a utility like Lion Cache Cleaner 6.0.5, Cocktail, TinkerTool Sys..., or OnyX to clean out user, system, and font caches.

Oracle does not start automatically ORA-01031: insufficient privileges

Hi,
OS WS2008R2.
ORACLE 11gR2.
Oracle Instance does not start with oracle services but if i stop and restart the services it comes up clean.
Moreover if i change service ownership to Domain\Administrator it again works well.
Checked registery and all ok. No error in alert.log. Only clue found in Oradim.log.
ORADIM.LOG....
C:\Oracle\Ora11g\bin\oradim.exe -startup -sid ptdb -usrpwd * -log oradim.log -nocheck 0
Thu Nov 15 15:16:15 2012
ORA-01031: insufficient privileges
Please help
Thanks

1- startup type- Auto
2- Group to user- ORA_DBA
3 - you can check log on tab in the service properties and set the username and password who responsible about this services
As i already stated 3 works. but i want it to work under Local System and not under any user.
Thanks

Panel does not start automatically in Gnome 2.24.3

Since Gnome 2.24.3, the Gnome Panel does not start automatically.
I had to manualy add it to the startup group via "Sessions" in order to force it to start when login finishes.
Does anybody has the same behavior?
Should I report it as a bug?

That may be true but it is a real pain since when it happens the only way to recover is to terminate all of the iTunes modules with task manager and start it manually. It also leaves the IPOD in a state that says do not disconnect. You can disconnect since nothing is really happening but there is no excuse for this not to start much faster. When you have multiple users it is a real pain. It ought to be able to either end when finished or better yet allow multiple users simultaneously updating from different libraries.
I guess i will just have to get in the habit of treating it as a single user and start and stop it every time I need it and be suer not to let it run. Not nice because that means waiting for larger Podcast downloads instead of having there ready for me when I sign on my computer.

Laptop L655-S5157 Does Not Start Up & Run.......

My Laptop L655-S5157 Does Not Start Up & Run Longer Than 1-3 Mins Upon Selecting The Start Button.
After It Starts & Looks Like It's Going To Run Normal, It Just Turns Right OFF.
I Can't Send Any Attachments Because The Only Way I Can Communicate Is Running The LT In The "SAFE MODE".
I've Taken Pics Of It Running & Trying To Repair Itself On My iPhone.
I've Also Ran "Startup Repair" Program, But All It Says In The End, Is It Can't "Repair This Computer Automatically".
It Then Says To Send The Problem Details To "Microsoft Solutions", I Comply & Send The Information To Them.
I Know Enough About Laptops/Computers To Be DANGEROUS...
I Really Dont Understand What To Do In The "Safe Mode", Except That It's Safe & Runs Only The Essentials.

It Started NOT Running In The Normal mode The Day That Chuck Noll Passed Legendary Football Coach Ot The Pittsburg Steelers On 14 Jun 2014.
The Link I Clicked On Was From Twitter
Ever Since Then, The Only Way I Can Communicate With The World Through My Computer Is In The Safe Mode.

BADI FILTER_F4_ADHOC_AGENT does not start

Hello,
I have the following problem. I want to manipulate the search result when adding a new approver.
The Problem is that the method FILTER_F4_ADHOC_AGENTS build in with BADI does not start. My breakpoint in there is useless.
On the other hand the method CHECK_INPUT_ADHOC_AGENT runs well. My breakpoints stop in there.
Now my questions: Where is the call of the method FILTER_F4_ADHOC_AGENTS? And why does not my breakpoint stop there?
Thanks for any answers.
Edited by: Rico Scharm on Apr 7, 2010 8:17 PM

I solved the problem by debugging the search help i found after hours.
The problem is, I maintained a filter to BUS2121 as usual for the other workflow badis. But when the search help is looking for badis it got no object type. After realizing this I left the badi implementation without any filter. Now it my implementation is triggered.

Oracle DBconsole service does not start

Hi,
Db 10g 2 on Win XP pro. When I want start Oracle DBconsole service , it does not start. I receive a message from windows to see the provider and says that error code is 2. When I look at event logs of windows it is said abnormal exit and event code is 4. Cosequently it is impossible to see DB control in Internet Explorer browser.
Thanks for your help.

Thank you Madrid. I resolved the problem. I had this :
set ORACLE_SID=ORCL2
C:\Documents and Settings\> emctl stop dbconsole
OC4J Configuration issue. C:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_LAPTOP-145_ORCL2 not found.
Actually I had C:\oracle\product\10.2.0\db_1/oc4j/j2ee\LAPTOP-145.b-a-w.com_orcl. Then I should have create OC4J_DBConsole_LAPTOP-145_ORCL2.I created that and no more problem.
My question is where emctl look for this name OC4J_DBConsole_LAPTOP-145_ORCL2 ? In tnsnames.ora, in sqlnet. ora or some where else ? Thank you.
can anyone answer please ?
Message was edited by:
user522961
Message was edited by:
user522961

Imovie song does not start at the beginning after I edited the duration of the clip

Similar Messages

Maybe you are looking for