IMovie stopped working in export
I purchased an iMac last year. iMovie seemed to be fine in the past year, though I only used it for a few times. However, it stopped working last night when I exported it. After clicking "export", it showed "preparing project". Unfortunateky, just in 2 seconds, iMovie window disappeared and another window popped up asking me to click either "ignore, report or reopen" due to an error I could not figure out. I tried several times and it still failed!
I found similar questions were asked by many users online. However, it seemed that nothing worked. I contact tech support in Apple and was told that it would charge about $20 for service, though it was not guaranteed to fix the problem. Ridiculous!!
I really appreciate your kindness to help me in this issue.
Have you tried deleting iMovie's preference file?
Close iMovie. Go to your Home file (YourUserName)/Library/Preferences/com.apple.imovie8.plist
Drag this plist file to the Trash. Don't worry, iMovie will create a new fresh one when you relaunch it. (If you also have iMovie 6 on your drive, its plist file will also be there, but it will say only imovie.plist without a number. Be sure you trash the correct one).
Reopen iMovie and see if it works ok now.
Similar Messages
-
Photoshop CS6 stopped working while exporting images via imageprocessor! [PC]
As the title says, my Photoshop cs6 64bit allways stops working and freezes when i attempt to export several opened documents via the imageprocessor.
I try to export them as JPEG, qualitiy 12.
My system Information:
Intel i5 Quad
12 GB DDR3 Ram
about 300 GB free disk space on saving location, (HDD) and 20 GB Workspace on SSDs for Phtoshop...(Working Volumes)
Here is the Photoshop System Infromation:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Betriebssystem: Windows 7 64-Bit
Version: 6.1 Service Pack 1
Systemarchitektur: Intel CPU-Familie:6, Modell:10, Stepping:7mit MMX, SSE (ganze Zahl), SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physischer Prozessor: 4
Prozessor-Taktfrequenz: 3110 MHz
Eingebauter Speicher: 12255 MB
Freier Speicher: 9411 MB
Für Photoshop verfügbarer Arbeitsspeicher: 10980 MB
Von Photoshop verwendeter Arbeitsspeicher: 70 %
Bildkachelgröße: 128 KB
Bildcache: 4
Mit OpenGL zeichnen: Aktiviert.
OpenGL-Zeichnungsmodus: Erweitert
OpenGL – normalen Modus zulassen: Wahr.
OpenGL – erweiterten Modus zulassen: Wahr.
OpenGL – alte GPUs zulassen: Nicht erkannt.
Grafikkarten-Hersteller: NVIDIA Corporation
Grafikkarten-Renderer: GeForce GTX 560/PCIe/SSE2
Anzeige: 2
Anzeigebegrenzungen:= oben: 0, links: 1920, unten: 1080, rechts: 3840
Anzeige: 1
Anzeigebegrenzungen:= oben: 0, links: 0, unten: 1080, rechts: 1920
Grafikkartennummer: 1
Grafikkarte: NVIDIA GeForce GTX 560
OpenCL Version:
Treiberversion: 8.17.13.142
Treiberdatum: 20120515000000.000000-000
Grafikkartentreiber: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Grafikmodus: 1920 x 1080 x 4294967296 colors
Grafikkartenbeschreibung: NVIDIA GeForce GTX 560
Grafikkartenspeicher: 1024 MB
Video-Rechteck Strukturgröße: 16384
Seriennummer: Testversion
Anwendungsordner: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Pfad für temporäre Dateien: C:\Users\Dave\AppData\Local\Temp\
Der virtuelle Speicher von Photoshop hat asynchronen E/A aktiviert
Arbeitsvolume(s):
Start, 55,8 GB, 4,55 GB frei
Ordner für erforderliche Zusatzmodule: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primärer Zusatzmodul-Ordner: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Zusätzlicher Zusatzmodul-Ordner: nicht eingerichtet
Installierte Komponenten
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Erforderliche Zusatzmodule:
3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Adaptive Weitwinkelkorrektur 13.0
ADM 3.11x01
Aquarell 13.0
Arithmetisches Mittel 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Basrelief 13.0
Bereich 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bildpaket-Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Blendenflecke 13.0
BMP 13.0
Buntglas-Mosaik 13.0
Buntstiftschraffur 13.0
Camera Raw 7.0
Chrom 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
CompuServe GIF 13.0
Conté-Stifte 13.0
De-Interlace 13.0
Diagonal verwischen 13.0
Dicom 13.0
Differenz-Wolken 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Distorsion 13.0
Dunkle Malstriche 13.0
Durchschnitt berechnen 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Entropie 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Erfassungsbereich 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Extrudieren 13.0
Farbpapier-Collage 13.0
Farbraster 13.0
Fasern 13.0
FastCore-Routinen 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Feuchtes Papier 13.0
Filtergalerie 13.0
Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fluchtpunkt 13.0
Fotokopie 13.0
Fotos freistellen und gerade ausrichten (Filter) 13.0
Fotos freistellen und gerade ausrichten 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fresko 13.0
Für Web speichern 13.0
Gekreuzte Malstriche 13.0
Gerissene Kanten 13.0
Glas 13.0
Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Grobe Malerei 13.0
Grobes Pastell 13.0
HDRMergeUI 13.0
IFF-Format 13.0
JPEG 2000 13.0
Kacheleffekt 13.0
Kacheln 13.0
Kanten betonen 13.0
Kohleumsetzung 13.0
Konturen mit Tinte nachzeichnen 13.0
Körnung & Aufhellung 13.0
Körnung 13.0
Kräuseln 13.0
Kreide & Kohle 13.0
Kreuzschraffur 13.0
Kristallisieren 13.0
Kunststofffolie 13.0
Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Leuchtende Konturen 13.0
Malgrund 13.0
Malmesser 13.0
Matlab-Vorgang 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mehrprozessorunterstützung 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mit Struktur versehen 13.0
Mit Wasserzeichen versehen 4.0
MMXCore-Routinen 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neigung 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neonschein 13.0
NTSC-Farben 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Objektivkorrektur 13.0
Objektivunschärfe 13.0
Ölfarbe 13.0
Ölfarbe getupft 13.0
OpenEXR 13.0
Ozeanwellen 13.0
Patchwork 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pfade -> Illustrator 13.0
Photoshop 3D-Modul 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
PNG 13.0
Polarkoordinaten 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Prägepapier 13.0
Punktieren 13.0
Punktierstich 13.0
Radialer Weichzeichner 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Rasterungseffekt 13.0
Risse 13.0
Schwamm 13.0
Schwingungen 13.0
Selektiver Weichzeichner 13.0
Solarisation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spritzer 13.0
Standardabweichung 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Stempel 13.0
Strichumsetzung 13.0
Strudel 13.0
Stuck 13.0
Sumi-e 13.0
Summe 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Targa 13.0
Tontrennung & Kantenbetonung 13.0
U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Unterstützung für Skripten 13.0
Varianz 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Variationen 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Verbiegen 13.0
Verflüssigen 13.0
Versetzen 13.0
Verwackelte Striche 13.0
Wasserzeichen anzeigen 4.0
Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Weiches Licht 13.0
Wellen 13.0
WIA-Unterstützung 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Windeffekt 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wölben 13.0
Wolken 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Optionale Zusatzmodule und Zusatzmodule von Drittanbietern: KEINE
Nicht geladene Plug-Ins: KEINE
Blitz:
Mini Bridge
Kuler
Installierte TWAIN-Geräte: OHNE
Here is the event log from windows 7 :
Log Name:
Application
Source:
Application Error
Date:
05.06.2012 17:55:30
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Rendermonster
Description:
Faulting application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61c045
Faulting module name: MSVCR100.dll, version: 10.0.40219.1, time stamp: 0x4d5f034a
Exception code: 0x40000015
Fault offset: 0x00000000000761c9
Faulting process id: 0x1238
Faulting application start time: 0x01cd4332a73fc50b
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\MSVCR100.dll
Report Id: dfe564f1-af26-11e1-ab1c-5404a6813795
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-06-05T15:55:30.000000000Z" />
<EventRecordID>8558</EventRecordID>
<Channel>Application</Channel>
<Computer>Rendermonster</Computer>
<Security />
</System>
<EventData>
<Data>Photoshop.exe</Data>
<Data>13.0.0.0</Data>
<Data>4f61c045</Data>
<Data>MSVCR100.dll</Data>
<Data>10.0.40219.1</Data>
<Data>4d5f034a</Data>
<Data>40000015</Data>
<Data>00000000000761c9</Data>
<Data>1238</Data>
<Data>01cd4332a73fc50b</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\MSVCR100.dll</Data>
<Data>dfe564f1-af26-11e1-ab1c-5404a6813795</Data>
</EventData>
</Event>
so it looks like there was a porblem with MSVCR100.dll ... What is it?Thanks for your responce, i will try that but i think nvidia is on newest driver..
It would be intresting to know what this MSVCR100.dll is doing, i have seen problems in Games like Battlefield and Fallout..
I will now try to disable the GPU acceleration in PHS.. -
Premiere Pro CC Stopped Working while exporting
I've been working on Premiere Pro CC since 2 months without any issue. I made a multicam sequence this time as we had a project with 3 cams and edited it well. Everything went well until we exported it. While exporting it, premiere suddenly stops working in between. Tried exporting in a queue, using Adobe Media Encoder, same happens there stops suddenly and says a problem caused the program to stop working correctly.
I'm having videos from 3 cameras, 50i AVCHD footage. Audio from Zoom H1
Kindly help.
I have tried going on Software only as well as have tried uninstalling and reinstalling. Nothing worked so far. Please please help.. It suddenly stops working at about 45%..
I'm on a Windows 64bit machine with 8gb ram, Nvidia graphics card(drivers updated), Intel i3-3220.
EDIT : I tried re-exporting one of my previous projects, and it renders well..
Message was edited by: YamanagI'm encoding the sequence in AME itself. While watching the clip when encoding it, I saw where it stops and changed the clip there. With luck, this time the encoding continued. But another problem arises, at the last of the first pass. I mean at the very end of the encoding of the first VBR Pass the encoding stops and says failed. I clicked and got a note
- Encoding Time: 01:19:32
09/11/2014 03:47:42 PM : Encoding Failed
A low-level exception occurred in: Colorista II (AEVideoFilter)
Export Error
Error compiling movie.
Unknown error.
I do have HD Images in my sequence.. How do i overcome this error now? -
IMovie stopped working please help!
the new version of iMovie i just downloaded two days ago has stopped working, it will not even open, how do i fix this??
Can you create a new user account on your Mac, and see if iMovie works properly from the new account?
If so, trashing preferences might work. See my post here.
https://discussions.apple.com/docs/DOC-4061 -
Why does iMovie stop working after a set number of photos?
I have struggled through 3 Photo Storys so far using iMovie, only to be thrwated by the same problem every time! There are hundreds of photos to add, to give you an idea I'm at 11 minutes 44 seconds with 1 second transitions and 4 second photos.
At the same point each time the iMovie project allows photos to be dropped in but are represented by black thumbnails. On playing the movie they are then replaced with previous photos, looped several times. It seems that Apple have put in a maximum limit of photos?
Answers to questions I'm preguessing:
1: I use iMovie for this because I can use transitions, text etc which is far better than the slideshows that iPhoto create.
2: The images are no imported in to iPhoto as they are school pictures. Therefore they are stored locally and dragged in to place when needed.
3: I use Mac OS X Lion and the latest available version of iLife '11.
4: 320gb of free space!
5: No music in the movie but that doesn't seem to make a difference (First two had sound, third did not).
6: All images used are JPEG, no CR2 etc...
7: No files are stored on the network and are only linked locally.I'm having this problem as well. In my case I'm getting partial 0 byte files, sometimes with temporary hex file names with the .mp4 extension.
I copied the whole library (which was new and only contained one project) over to my laptop, where export then went just fine. I've also been having other QuickTime related issues. You can help pin this down with a few tests:
Open a short .mov video (best taken on iPhone, import with Image Capture) in QuickTime X. Attempt to export to 480p. Does QT crash?
Try to import the same .mov video in iPhoto 9.5.x. Does it import normally to iPhoto? Or do you get "unrecognized format" errors?
Do you see any crash logs for ProTranscoderTool_sb in Console?
If you search for iMovie in console, do you find any lines that mention problems with these files?:
/Library/CoreMediaIO/Plug-Ins/FCP-DAL/iOSScreenCapture.plugin/Contents/MacOS/iOS ScreenCapture
"The bundle “iLMBPhotosPlugin” couldn’t be loaded because it is damaged or missing necessary resources."
/Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBPhotosPlugin.ilmbplugin/Contents/MacOS/i LMBPhotosPlugin
I also wonder if there's any conflict/issue with FCP being installed. Not very helpful but see this link:
http://theappleqa.com/final-cut-pro-x/59506-ProTranscoder-Tool-Not-Responding-ca n-t-complete-share.html
Also see this related thread (also no solution yet):
iMovie 10.0 not sharing -
i need it for friday the 5th
Hi
Try - not use "Share to iDVD" - BUT - "Share to Media Browser" and as Large Not HD or other resolution
Then Close iMovie
Open iDVD and start a Brand New Project
Here import movie from Media button (down right) and Movies.
then when all is in place - Save as a DiskImage
test this with DVD-player tool - still OK ?
burn this with Disk Util tool and set burn speed to x2 or x4
Now first insert blank DVD - WHEN ASKED to do so
Yours Bengt W -
ImporterProcessServer.exe has stopped working...sound familiar?
Ok, I've read most if not all of the posts on this subject and this same issue is happening to me. I've tried the different solutions offered as well to little or no avail. Here is my story.
ImporterProcessServer.exe stops working during export using Adobe Media Encoder. I have a project that is 44 minutes in duration and the process stops at approximately halfway through the process each time. On smaller projects, duration of approximately 15 minutes or less the Encoder functions properly. At one point during time line render I would also get ImporterProcessServer error also but that seems to have subsided. Regardless of the project source clips DV, Blackmagic, or P2 formats I get the error on export or timeline render.
Here are my computer stats
Intel Dual Core E5420
64 Bit Vista SP2 Business Edition
ATI Radeon x300/x500/x1050
Serial ATA 250 GB drive for OS and Adobe Software
Serial ATA 1.5 TB raid 5 array for clip storage
24 GB Ram
Premiere CS4 version 4.1.0
Adobe Media Encoder version 4.4.107
Blackmagic Design HD Extreme Capture Card Driver Vers. 7.2 64 bit
I have uninstalled and reinstalled Vista several times, even flattening HD and starting over.
Uninstalled and reinstalled Adobe CS4 same if not more times than the Vista OS
I was using CS3 on XP and didn't experience this issue, and to avoid the cute response I will get; no I'm not going back to CS3 and XP thank you. That ship has sailed and can't re-create all the CS4 projects in CS3.
So to sum up, yes I am yet another person with the same persistant ImporterProcessServer.exe problem. Yes, there are alot of us out here, many more than the ones that post. I waited months before posting, searching for an answer. Based on my experience and others I have read about, I feel many more would join the discussion if they weren't so fed up with frustration. So if Adobe is out there lurking on this forum, I say "Hi, how ya doing?" This software suite is expensive and I need to be productive to stay employed. Please help us! We're out here struggling to use your product.
Of course if anyone else has a positive constructive contribution to my post please send it along.
ThanksOf course if anyone else has a positive constructive contribution to my post please send it along.
I wish that I did, especially with so well-written a post. Unfortunately, I only have a couple of questions, and they might have zero bearing on your issue:
1.) what is the free space available on your C:\ (the 250GB SATA, I assume)?
2.) is there anything different at about the halfway point in your Timeline (around where the error occurs)? *
3.) since the error occurs with different media, and different Capture, is the timing of the error pretty constant for all of these longer Sequences? [From your info, it seems that it is.]
That shorter Sequences do not yield the error, but longer ones do, I'm thinking that there might be some link to the Duration.
* However, with different media, I would assume that your Sequences would be rather different from one another, just longer than the Sequences that perform correctly.
Again, wish I had some answers for you. Just grasping at straws here. As we all know, there is little, if any Adobe presence here.
Good luck,
Hunt
PS Have you filed a Bug Report/Feature Request? -
IDVD Stops Responding when Exporting from iMovie
I'm using iDVD and iMovie (from iLife 06 and fully up to date) on a MacPro (also up to date on all software, MacOSX, Quicktime etc).
This proceedure has worked before several times but now results in a non-responding iDVD every time I try it, including an archive and re-install and a complete new install of OSX and all software on a new partition.
What I'm doing.....
[1] Recording a TV programme on EyeTV (410) and exporting it to iMovie - sucessful every time
[2] Edit the iMove project and add chapter markers and save project - no problem.
[3] Export to iDVD - iDVD shows exporting in progress and whilst this is still showing iDVD launches
[4] iDVD starts playing the music from a std theme for a few seconds and then stops. Then resumes the music after resizing the window and then after a couple of more seconds freezes. From the Dock I can see that iMove and iDVD are "not responding"
[5] Eventually iMovie completes it's "export" and then starts responding normally. iDVD continues to show as non responding although I can move the window around the screen. I have to force quit iDVD to get it to close down.
I have tried:
Re-exporting the project from EyeTV
Deleting the preferences files for iMove and iDVD
Deleting the iLife suite and re-installing
Doing an OSX archive and re-install
Installing a fresh OSX (10.4.8) on a different drive and installing fresh software
Running Disk Utility - clean bill of health on both drives
Repaired permissions
The Console reports the following errors when exporting from iMove to iDVD:
===== Tuesday, 24 October 2006 22:56:45 Europe/London =====
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 0
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
[KN,10:57:11:968]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
2006-10-24 22:57:53.394 iDVD[424] NSExceptionHandler has recorded the following exception:
NSInvalidArgumentException -- * -[NSCFArray addObject:]: attempt to insert nil
Stack trace: 0x954ee243 0x9264f2cb 0x9264f110 0x925dd399 0x000df708 0x000df806 0x00215e6d 0x002167ef 0x0021470b 0x001a0b4f 0x00184105 0x92627d78 0x92627222 0x92626fa9 0x92626811 0x92621ae0 0x00166dc7 0x9261e861 0x925f2ef1 0x925f2d1b 0x9151d6c5 0x9151d5f6 0x9151d4c2 0x92dda340 0x9325c63d 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
Result - problem persists. I'm at a loss as what to do next. Any suggestions greatfully received.Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on? -
Voiceover recording in iMovie has stopped working.
My voiceover narration in iMovie 11 has stopped worked. It worked initially and then stopped working. I have tried headseat mike and internal mike and checked the audio setting when using them in voiceover. When i record narration, the audio is registering in the voice meter, the red progress bar passes over the part of the iMovie where I am recording. When I do playback, no voice.
Like I said this worked the frist time I used it, but has not worked since. Any ideas?
Lem"If there any other tools people use to record voiceovers while being able to listen to the original audio?"
You could export your audio to an AIFF file and then bring that into GarageBand to add your voice over tracks.
iLife '06 makes the process even easier. You can actually see your movie play inside GarageBand.
I wouldn't buy iLife '06 today though, there's good reason to belive that iLife '07 may be announced at MacWorld.
Matt -
imovie stops when exporting. Can someone help me to solve this?
Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on? -
Preview in iMovie suddenly stopped working
I was working on a project, and suddenly the preview window, on te right stopped working.
I can't edit the project anymore, can't view it, can't export it, ..
I tried a lot of thing, like reinstalling imovie, moving the files, rebooting, ...
Nothing seems to work
Help me out please
PS: previewing imported clips does workCool! I've been seeing a lot of messages on the iMovie Discussion Group with similar symptoms. And one of the newer contributors to the list (calbe) kept recommending doing this step, of moving the last project out of the folder. And to my surprise it worked consistently. So now I'm recommending it to anyone who has a crash, lockup or any kind of Force Quit that then leads to iMovie being completely unstable afterwards.
And if you have the time or interest, as a further preventative measure you can also try moving the iMovie Preference file out of the Library. This forces iMovie to create a new preferences file. The benefit would be that Preferences file is notorious for causing problems after a Force Quit sometimes. To find the preference file go to the Mac Desktop and choose the Go Menu > *Hold down the Option key (this reveals the Library folder), click on Library (it appears grayed out but you can click on it. Inside of the Library>Preferences>com.apple.iMovieApp.plist (drag that file to the trash or the desktop). Make sure you have quit iMovie before doing this step, after you move the preference .plist file, open iMovie and make sure all your Events/Projects are visible and you can skim them with photos, titles all showing up.
Deleting the iMovie preferences file is not a requirement but more a preventative measure to keep iMovie humming along. -
Error while exporting "PProHeadless.exe has stopped working"
hello friends,
I am facing trouble while exporting any video from Premiere Pro, right now I tried to export video with H.264 codec but after completing to 60% it stopped and showed an error mesg PProHeadless.exe as stopped working, I checked some threads but didn't find any solution. Following is the detailed error code
Problem signature:
Problem Event Name : PPCRASH
Application Name : PProHeadless.exe
Application Version : 0.0.0.0
Application Timestamp : 4ce34c66
Fault Module Name : dvamarshal.dll
Fault Module Version : 5.0.0.0
Fault Module Timestamp: 4ce33713
Exception Code : c0000005
Exception Offset : 0000000000023c88
OS Version : 6.1.7600.2.0.0.256.1
Locale ID :1033
Additional Information 1: 5c8e
Additional Information 2: 5c8ea6111923f086cbfdc87126296bd6
Additional Information 3: bc7e
Additional Information 4: bc7e96e4b390e9895c38ff75db64a199
I checked one thread suggesting the re-installation of Windows 7 and other suggesting re-installation of Adobe Premiere Pro so is this error occured due to windows or due to adobe PR?
please help me, your help is highly appreciated....
Happy New Year to everyoneHi Todd,
Thank you for the quick reply, yes I have installed the Premiere Pro CS5 Update 5.0.3, still I am facing the same problem -
Export Controller stopped working
I am so lost here, can not open Quicktime I get this error, and I have tried to uninstall and reinstall in every mode I can and its still comes up, Please someone help me...
Product
Export Controller
Problem
Stopped working
Date
1/27/2011 3:40 PM
Status
Report Sent
Problem signature
Problem Event Name: APPCRASH
Application Name: ExportController.exe
Application Version: 7.69.80.9
Application Timestamp: 4cf4445a
Fault Module Name: CoreFoundation.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e03821
Exception Code: c0000135
Exception Offset: 00009eed
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: 9d13
Additional Information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Additional Information 3: 9d13
Additional Information 4: 1abee00edb3fc1158f9ad6f44f0f6be8I wonder if it's one of the weird permissions/UAC related versions of these?
Can you try something for me please?
In Computer, open Local Disk C:\ or whichever drive you have your program files installed on.
*If you have a 32-bit Vista,* open the "Program Files" folder.
*If you have a 64-bit Vista,* open the "Program Files (x86)" folder.
Open the "QuickTime" folder.
Right-click the QuickTimePlayer.exe file and select "Run as Administrator".
Does it launch this time, or do you still get the error message? -
Quick Time Player stopped working & Export Controller stopped working
I'm not quite sure when my problem began, I downloaded video from my Canon sd980is camera to my computer, when I tried to view the videos I get the Quick Time Playerhas stopped working "A problem caused the program t stop working correctly. Windows will close the program and notify you if a solution is available" and I also get Export Controller has Stopped Working. I have attempted to uninstall QuickTime but am not sure if that actually occured. Now, when I try to open QuickTime it says "Quicktime has stopped working. I am able to play music and video from my itunes. I just can't play my .MOV from my camera on computer. ANYONE able to assist??
I downloaded video from my Canon sd980is camera to my computer, when I tried to view the videos I get the Quick Time Playerhas stopped working "A problem caused the program t stop working correctly. Windows will close the program and notify you if a solution is available" and I also get Export Controller has Stopped Working. I have attempted to uninstall QuickTime but am not sure if that actually occured. Now, when I try to open QuickTime it says "Quicktime has stopped working. I am able to play music and video from my itunes. I just can't play my .MOV from my camera on computer.
I've got a few suspicions here, but I'll ask some questions before proceeding (to work out if I'm on the right track).
Was this the first time you had downloaded video from the camera to the PC? If so, did you have to install any Canon software in order to do that? If so, what was the name and version of the software?
When you tried to uninstall QuickTime, did you get a "fatal error" message? -
Export to Premiere Pro from Audition has stopped working...
Hello guys,
When I've finished an edit in Premiere I send it to Audition via Edit>Edit in Adobe Auditoin>Sequence.
But when I've finished in Audition and try to send it back via Multitrack>Export to Premiere Pro (sent as each track as a stem), Audition processes the session and then tries to send it back to Premiere.
The screen jumps back to Premiere as usual, but instead of seaing the pop-up window to insert new tracks as it should do, nothing happens. I've ran lots of tests to see what is going wrong, and can't find it. Somewhere on the journey into Premiere, the process stops and I really, really liked this feature.
Can anybody shed some light on why this has suddenly stopped working? I have made no changes to the installation of either Premiere or Audition, and neither have any plug-ins or extras.
Hope you can help,
ThanksHi,
I have the same problem to import files from audition. It save the work in .xml what I can load in premiere but automaticly it will not work.
Maybe you are looking for
-
Some features/options needed when using mobileme gallery in iframe
hi@all i have built this iweb site and embedded my mobilemegallery like this: <iframe width="1280" height="900 " frameborder="0" src="http://gallery.me.com/friereida#100008&view=mosaic&sel=0" more attributes> </iframe> so what i need is: how can i ac
-
HI, I've installed KDE in Solaris 10 3/05 but don't know how to make it my default Desktop Environment. I don't see it anywhere. The KDE I installed is the one from the Companion DVD, just in case you need this information. Can you please tell me how
-
Please help, after last update photoshop cc stopped working
Hello, I got a problem. After yesterday update my Photoshop CC doesn't work. I'm getting A. Photoshop CC has stopped working message. Please can you help? Thanks sebastian
-
I have signed up with Verizon, my account says I have 100% unused data available but when I turn on Cellular data, it tries to use 3G but the connection fails??
-
XP says NO DRIVERS found for NANO
Hey, I already have a 60gb photo ipod which I haven't had any problems with on my computer everything runs great. Now I am trying to get my girl friends nano installed on my computer so I can put some music on for her. For legality sake we'll say all