IMovie themes need to be editable and other

Can themes be edited? I want to add additional squares to the "Reflection" theme - - three isn't enough! I want to change the typeface of the tiitle on that theme.
Also, I want to change the ugly purplish background color on the pass through theme. iDVD has that thhem and it uses no coloring... looks great!
I want to scale QT video up to widescreen size in iMovie. I uunderstand that it will distort.
Please help!

Themes can not be edited to my knowledage. I have tried it before and have not been successful. What you see is what you get. The only thing you can change in themes is texts.
I am not quite sure what you mean about the theme. You want to know if you can remove it from iMovie? or from iDVD?

Similar Messages

New Laptop w Vista - Need help transfering Palm and other software to Vista

I got a new laptop that runs Vista. My Palm TX has been the Palm and all other software fine on my Windows XP desktop computer.
How do I move all my Palm info over to the laptop without starting a lot of problems.
Will I still be able to sync my Palm on both my desktop Windows XP and my Vista laptop?????
Can someone please give me a step by step guide for this procedure:
Thanks for the help and advoe
JoAnne
Post relates to: Tungsten T3

To sync on your new 32-bit desktop you will need to download the Vista-compatible Palm Desktop 6.2.
You will also need to install Documents To Go v.10 on the new desktop as well...should be fine with Vista. From what I've seen of Beyond Contacts, you will need to upgrade to 3.0083 to gain Vista support. I don't know if that's a paid upgrade or not.
If any of your other third-party apps also have a desktop component or install a conduit for synchronization, you'll need to check with each of them to verify compatibility with Vista and Palm Desktop 6.2.
When you connect to the new computer for the first time after you install Palm Desktop software, just select the TX's current Hotsync ID to sync with, and the data on the TX should automatically migrate into your new installation. But it's always best to be safe rather than sorry. Get a copy of NVBackup (google and download from any legit source such as www.palmgear.com ), and run a complete backup onto a SD card. That way, you'll be minutes away from a full Restore if anything does happen in the transition.
Lastly, if you plan to sync with your two computers, you will need to be careful and only use one of them for full 2-way synchronization, and use the other purely as a clone to hold a copy of the data on the handheld, using Handheld Overwrites Desktop conduit settings on that second computer. Otherwise data corruption is sure to result. This Palm Knowledgebase Article discusses how to Hotsync one device on two different desktops:
http://tinyurl.com/kq4c5
Good luck, let us know how it turns out.
Post relates to: None
Message Edited by smkranz on 01-21-2009 11:14 AM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

I need to upload edit and change blueprints, what should i get

What should i get to upload edit and change blueprints

Sorry, this question is way too generic. "Edit and change" can mean a million things. what are the blueprints based on? What changes do you need to make?
Mylenium

Make only the new row in a table editable and other rows display mode.

Hiii all,
I am working on the component GSWISET, there is a table view for substitutes, the requirement is to show all the rows in the table view in display mode. Whenever the user clicks the button (Add employee), a search popup triggers and the user selects an employee from that and it will come as a new row in the table view. Here I need to be able to make only the new row editable and all the other rows in display mode.
Could you please suggest a way to achieve this. Thanks for your time..

Hi,
Try with the code below in.htm page
data: lv_displaymode TYPE string.
IF controller->view_group_context->is_view_in_display_mode( controller ) = abap_true.
    lv_displaymode = 'X'.
ELSE.
    lv_displaymode = ' '.
ENDIF.
if lv_displaymode = 'X'.
<chtmlb:tableExtension tableId = "Substitutes"
                       layout = "FIXED" >
<chtmlb:configTable actions               = "<%= controller->gt_button %>"
                      id                    = "Substitutes"
                      onRowSelection        = "select"
                      selectedRowIndex      = "<%= substitutes->SELECTED_INDEX %>"
                      selectedRowIndexTable = "<%= substitutes->SELECTION_TAB %>"
                      table                 = "//Substitutes/Table"
                      width                 = "100%"
                      selectionMode         = "<%= substitutes->selection_mode %>"
                      visibleFirstRow       = "<%= substitutes->VISIBLE_FIRST_ROW_INDEX %>"
                      usage                 = "ASSIGNMENTBLOCK"
                      headerText            = "<%= controller->gv_header_text %>" />
</chtmlb:tableExtension>
else.
<chtmlb:tableExtension tableId = "Substitutes"
                       layout = "FIXED" >
<chtmlb:configTable actions               = "<%= controller->gt_button %>"
                      id                    = "Substitutes"
                      onRowSelection        = "select"
                      selectedRowIndex      = "<%= substitutes->SELECTED_INDEX %>"
                      selectedRowIndexTable = "<%= substitutes->SELECTION_TAB %>"
                      table                 = "//Substitutes/Table"
                      width                 = "100%"
                      selectionMode         = "<%= substitutes->selection_mode %>"
                      allRowsEditable       = "TRUE"
                      visibleFirstRow       = "<%= substitutes->VISIBLE_FIRST_ROW_INDEX %>"
                      usage                 = "EDITLIST"
                      headerText            = "<%= controller->gv_header_text %>" />
</chtmlb:tableExtension>
endif.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Dec 24, 2010 12:49 PM

One row as editable and other row as non-editable in table control

Hi Experts,
           Is this possible to make one row as editable and another row is non editable in table control?
My Requirement is
1st row non editable field
Customer code, description,amount will come from the previous screen this will be non editable for user.
2nd row editable
User has to enter the amount in 2nd row here the customer code description will be empty.
If 4 customer are there
1,3,5,7 should be non editable and 2,4,6,8 should be editable..
Pls help me in this issue..
Thanks in Advance!

hI
This is a simple Module POOL program with only Table control and nothing else
" This is Tested to Enable one row and disabling the next row
in TOP Include
controls : tc type tableview using screen 100.
DATA : OK TYPE SY-UCOMM.
DATA : ITAB TYPE TABLE OF SPFLI WITH HEADER LINE.
in PBO
PROCESS BEFORE OUTPUT.
MODULE status_0100.
LOOP AT itab WITH CONTROL tc.
   MODULE TC_MOD.
ENDLOOP.
in PAI
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
LOOP AT itab.
ENDLOOP.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'TEST'.
SET TITLEBAR 'TEST'.
DESCRIBE TABLE itab LINES tc-lines.
IF tc-lines = 0.
    tc-lines = 20.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
MODULE tc_mod OUTPUT.
DATA : mod TYPE i.
LOOP AT SCREEN.
    mod = tc-CURRENT_LINE MOD 2 .
    IF mod = 1.
      IF screen-name = 'SPFLI-CARRID'.
        screen-input = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMODULE.                 " TC_MOD OUTPUT
Edited by: Ramchander Krishnamraju on Jan 25, 2011 7:17 AM

Elements 10 trial doesn't show guided edit and other menus

I've just downloaded and installed the Photoshop Elements 10 trial for the second time.
I shut down my firewall and internet security while installing.
The program loads fine but when I click on Guided edit, the panel on the right is blank.
This is the same for Quick edit.
The help files also won't load.
I'm running a Windows 7 on a 64 bit machine.
Please help!

Try clicking the re-set panels button on the top menu bar and see if that makes any difference. Have you tried with an image open. Certainly the Quick edit module remains grayed out usually until you have a photo in the main window.
If that does not fix it you may need to rebuild the editor preferences to resolve any conflicts.
Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it.
You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
Click on Yes
Close down Elements and re-open it in the normal way - then wait whilst it rebuilds the preferences.

What Tech Specs are needed for iOS developement and other game developement?

I am looking to buy a new macbook pro most likely the retina because it has a much higher resolution and flash storage which will make it much faster than a regular macbook pro. I am going to use this computer for programming including iOS developement and web design. I will also be using higher end applications like cinema 4d, unity 3d, and the adobe products.
I am in school so i will also be using this for simple school functions.
I was wondering should i get the 16gb model or is 8 enough?
And should i get more internal storage than 256 gb and just use the Apple Time Capsule for a wireless external hard drive or get more storage on the macbook?

Since the RAM on the Retina model can't be upgraded by the user, I would go with the full 16GB.
I would also look at the 512GB flash storage option - you don't want to lug around an external drive.
Just my 2¢...
Clinton

Skype for 8520 and other BB version's / Question needed to be answered by Blackberry support for everyone!

This is a question that seriously needs answering for myself and other BB customer's.
Personally the only reason I have a BB is because I can have window's live messenger on it, But WLM is closing in April and updating to skype, Meaning everyone who use's WLM that their contact's will be going there and not to any other network!
Now I've read from what I've researched that BB maybe will be joining with oovoo something like that, Why when that is not where people's MSN/Hotmail contact's will be going ?
BB paying customer's to BB product's want access to there MSN/Hotmail contact's not to be diverted to another service that does not have their MSN/Hotmail contact's.
Also I have seen that skype or something along those line's will be available for the new BB 10, So what about earlier product's such as BB curve 8520 that I personally own myself that has nothing wrong with it?
So us paying BB customer's are going to be excluded because we don't have a brand new version of BB due to there being nothing wrong with the BB's we have? Which so were going to be penalized?
I would like these question's answered please because I am not happy about this and I'm sure a lot of other BB customer's are not too, It's not anyone's fault that WLM is going to be taken away but atleast make sure that BB customer's have a skype app to access their MSN/Hotmail contact's and can conversant with them directly like WLM.
Honestly I love my BB and wouldn't be without it purely because I'm able to log in WLM when I like, Where ever I am and talk to my contact's directly, Not all people have BB's and can not be added to BB messenger which is why WLM is a priority on BB app's for BB customer's, Is something going to be done about this? Because if not then that is just wrong which will result in many valued BB customer's changing to other phone's purely because out of being penalized of not having the newer version of BB 10 or not having skype at all regardless of IM+, We should have a direct Skype app and be able to have direct gain to our MSN/Hotmail contact's like we did on WLM.
So can someone answer this please and give us BB customer's confirmation on what is going to happen, Thank you.
For those of you BB customer's who are reading this who use WLM and is important to you as it is myself, Like this thread please so it get's noticed so that action will be taken. Thank you.

The answer is actually simple...example...6.0.0.415 for a 9860 is very different from 6.0.0.415 for a 9670. Hence, the app developers must port their apps to every combination of (usually) major OS level (e.g., 6.0, 7.0, 7.1) and specific device model number. That's a lot of combinations to which they must port their app...and many choose to not do them all. But the choice is the app developers.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Conservation-help please webdesigners and other help needed

are you interested in world conservation issues? Would you like to be part
of a team developing a website that may change the way people act towards
conservation and may indeed change the future of conservation volunteering
itself. [email protected] if you are interested a mission plan can be
obtained from the above address we will see were things go from there. This
is not a wind up in any way this is -planned to be both a serious tool in
terms of science and in terms of conersvtaion help mostly in the uk but also
abroad, the site will have a broad span of features. I need skilled web
designers and others who can help me market the idea, also once the site is
set up the way the site works will require a few trusted overseers, it must
be stressed that the site is none profit making in intent possible small
amounts may be paid for its construction but these will not be large. Anyone
interested in helping in the construction of this website will be rewarded
but further down the line and through simplwe satisfaction of seeing a
useful and well thought out idea coming to life at their own hands. please
reply to the sender address or [email protected] please if yopu have any
inclination do reply we need you as they say , if no one volunteers this
project wont getr carried out, any help will be greatfully accepted if you
give me 1hr or 2 of your time i will be very greatful indeed. The website
being constructed is only in web format because it makes it easy to access
and it is the easiest medium in which to get setup quickly advertising is
likely to follow in other mediums and over time the scope of the website as
explained in the brief which I will send you if you are interested will
increase and hopefully the good work which comes from that will increase
also. Thank you for your time
andrew cuthbert

are you interested in world conservation issues? Would you like to be part
of a team developing a website that may change the way people act towards
conservation and may indeed change the future of conservation volunteering
itself. [email protected] if you are interested a mission plan can be
obtained from the above address we will see were things go from there. This
is not a wind up in any way this is -planned to be both a serious tool in
terms of science and in terms of conersvtaion help mostly in the uk but also
abroad, the site will have a broad span of features. I need skilled web
designers and others who can help me market the idea, also once the site is
set up the way the site works will require a few trusted overseers, it must
be stressed that the site is none profit making in intent possible small
amounts may be paid for its construction but these will not be large. Anyone
interested in helping in the construction of this website will be rewarded
but further down the line and through simplwe satisfaction of seeing a
useful and well thought out idea coming to life at their own hands. please
reply to the sender address or [email protected] please if yopu have any
inclination do reply we need you as they say , if no one volunteers this
project wont getr carried out, any help will be greatfully accepted if you
give me 1hr or 2 of your time i will be very greatful indeed. The website
being constructed is only in web format because it makes it easy to access
and it is the easiest medium in which to get setup quickly advertising is
likely to follow in other mediums and over time the scope of the website as
explained in the brief which I will send you if you are interested will
increase and hopefully the good work which comes from that will increase
also. Thank you for your time
andrew cuthbert

Windows File compatibility, my iPod, and other questions

After years of gripping about doing Video and Photo editing on my PC, I am considering switching to a Mac. But, given I have a heavy investment in PC hardware, I want to make sure I can leverage everything the best way possible. So...
1.) I have a 20GB clickwheel iPod...any problem using this with a Mac? Need to be reformatted or anything?
2.) Can you access ActiveX based websites without problems?
3.) I have a Windows XP machine with 4 drives in RAID format. Could I use this as a common storage network drive for both Mac and PC's at the same time (for instance, store MP3's on it, and access and play them from either the iMac and other Windows PC's without a problem?). What about jpg formatted pictures? Any nuances between PC and Mac formats? (or is jpg really just jpg on either machine...I can open up the same picture on a Mac and a PC and see the exact same picture, without major color changes, etc.).
I realize I need to reformat to FAT, but other than that, are their other problems I should know about? (I would like to use the RAID configuration to make sure I don't lose any data)
That should start for now...
Thanks - Jeff
Windows (for now) Windows XP Looking at an iMac
Windows (for now) Windows XP Looking at an iMac

1.) I have a 20GB clickwheel iPod...any problem
using this with a Mac? Need to be reformatted or
anything?
You can use it, and it will need to be reinitialised formatted for the Mac.
2.) Can you access ActiveX based websites without
problems?
No you can't access ActiveX websites with a Mac
3.) I have a Windows XP machine with 4 drives in
RAID format. Could I use this as a common storage
network drive for both Mac and PC's at the same time
(for instance, store MP3's on it, and access and play
them from either the iMac and other Windows PC's
without a problem?).
Yes
What about jpg formatted
pictures?
Yes
I realize I need to reformat to FAT,
If the computer will still be running Windows and acting as a server then no you won't need to reformat to FAT.
iFelix

Importing an iMovie 09' project in AIC codec and reconform in FCP 7?

So here's the issue I would like advice on...
I have a shortform project that is partially built in iMovie 09'. The camera footage was AVCHD (from the Panasonic AG-HMC40) and was 1080p at 24 fps. It was imported into iMovie which of course converted it to the Apple Intermediate Codec (AIC)...a good codec but not as good as Apple's Pro Res HQ.
Let's say I want to continue with this project in FCP 7 but be using the Pro Res HQ codec instead of AIC.
Here are the steps I think I would take (please correct me if I'm wrong about this)
1. In iMovie 09' export an XML file to Final Cut.
2. Open that XML file in Final Cut Pro 7. I assume that edits will carry over and that the timeline will be configured for Apple Intermediate Codec in its sequence settings.
3. I select everything in the timeline and copy all.
4. I cut and paste into a new sequence. The sequence is still AIC but I go into the sequence settings and change it to Pro Res HQ. I do not want to render this yet.
5. I go into the bins window of FCP and I delink the footage which then takes what was my copy of the AIC footage in the timeline offline.
6. Using FCP's log and transfer, I reimport all my raw camera footage as Pro Res HQ. I import that into my project.
7. Using FCP's relink footage command (???) I relink my edited footage to the new Pro Res version. No rendering should be necessary and it should play in the timeline preserving my initial edits done in iMovie. I can continue editing and building the project...with everything now in Pro Res.
Is this the proper way to do it? Or is there a shorter method? I want to preserve the edits from iMovie but I don't want to render AIC footage into Pro Res because of the potential loss. I want to relink to all new Pro Res footage.
Any comments you can share would be very helpful.
Thanks,
John

What is the eventual output? DVD? If so, I wouldn't bother.
fwiw - ProResHQ is a waste for AVCHD footage. ProRes HQ is intended as an intermediate for film, 4k and 2k material. ProRes LT was designed for AVCHD and HDV material.
x

HT4759 Hi I am trying to access my iphone notes from my desktop and they are not transfered? how do i transfer them? It is working the other way around - until I edit a note on my phone and then it is lost on my desktop? Help!

Hi I am trying to access my iphone notes from my desktop and they are not transfered? how do i transfer them? It is working the other way around - until I edit a note on my phone and then it is lost on my desktop? Help!

http://support.apple.com/kb/HT1296

I can not get Firefox to play music backgrounds on pages in browsers it works in IE and other browsers but not firefox, what HTML or Jave script do I need too use to make them work?

I'm having a problem with firefox playing background music on some sites, it works with IE and other browsers but not with fire fox, what html or java script do I need to add to the pages so that they play the music?
I develop my pages in Front Page and I know that the music only works in IE, so if someone can tell me how to correct this problem as it is important as I use fire fox as my main browser.
I thank you in advance

If a website uses BGSOUND then it will only work in IE.
BGSOUND is not compatible with other browsers like Firefox.
* http://kb.mozillazine.org/Background_music_does_not_play

Can I use iMovie to edit and enhance both video and audio of my homemade DVDs?

I have a lot of homemade DVDs converted from old VHS tapes. The video and audio quality need to be edited/enhanced. Can I use my iMovie 11 for this task? If not what are my options? Thanks.

Hi
There are several layers to this Q
• VHS-tapes has a low quiality as is
• converted to sort of .mpe2 to a DVD to be played on standard DVD-player - Quality is futher lost
• converting it back to DV or AIC - and more quality is lost
• edit it in iMovie'08 to 11 - even more quality is lost due to that when going from Event's to Project's - every second line building up the picture is discarded (as non of them - iM'08 to 11 - works woith interlaced SD-video
So if quality is of any interest - I would - and are doing
• Converting from VHS-tapes
- via a CANOPUS ADVC-300 - to digital
- in via FireWire to
- to iMovie HD6 or FinalCut (any version) - asa they all keep 100% of the interlaced SD-quality
- edit and put out on miniDV tape (still 100% preserved) or to a DVD made in iDVD with all that keep as high quality possibly. (No Video-DVD can keep 100% quality - it's due to standard and amount of compressing)
If Quality is of no importance - then
• DVDs needs to be converted to DV or AIC and this is no free standard on any Mac - You need a converting program as
- MPEG StreamClip (free on internet) + BUT it needs the .mpeg2 Component from Apple to work ($20)
- Roxio Toast™ - can also be used to back engineer - BUT this cost's much more - still to me all extras was more than worth it
- Analog way - DVD-player - A/D-box - import via FireWire
Yours Bengt W

Need an app to edit and sign word documents (sign with stylus)! Notability let's me sign but doesn't pull up letter head, quickofficepro let's me edit but not sign. Looking for an app that does both

I am looking for an app where I can edit word documents as well as sign them. I am a physical therapist whose looking to cut down on paper work. Someone types my evaluations and then we print them out for me to edit by hand and then they go back and make the corrections on the computer then w print them and sign them to send off. Recently I have begun using apps where I can pull up the document and edit it thru quickofficepro or through cloudon, but I cannot sign them using a stylus pen. I also have notability which I can use to sign the documents, but it doesn't save the document as a doc, it's either a PDF or rtf. Also, in notability, it doesn't pull up the letter head for our company which is a template with our logo on it. So I need an app where I can both edit and sign my documents by hand using a stylus. If someone could provide me with any relevant information I would greatly appreciate it. Thank you for your time.

Hi,
Pages for Mac OS X, the topic discussed in this community won't do it.
I think you'll have a better chance for a useful answer in either the Using iPad or the iPad in the Enterprise community.
Regards,
Barry

IMovie themes need to be editable and other

Similar Messages

Maybe you are looking for