IMovie to iDVD - Chapters frozen

I've created a project on iMovie with no issues. I can play all the clips on the preview. I'm using the Share > iDVD function and 2 chapters just freeze when I use the iDVD preview.
I have a frame of another chapter and the sound of the one that was supposed to play. I had this issues with a few more clips, but after I replaced the source files they were fixed, but these 2, even with new source files just won't work. Any advice?

Ziatron wrote:
Use iMovie 06 with iDVD 08/09, why?
I don't like editing style of iMovie HD. It is painful to follow the subject and change camera angle. iMovie 09 gives freedom of creativity.
Ziatron wrote:
iMovie 08/09 uses 'single field processing' meaning every other horizontal line of the video is _thrown out_, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
iMovie 06 and iDVD 08/09 is a "lossless" combination.
With iMovie HD you are right up to the point when you need one project at disk. As soon as you need several clips to be present at one DVD disk this approach is not working anymore.
If you export projects to DV stream by QT _both iMovie HD and iMovie 08/09 do the same bad trick with you - single field._ The workaround of this issue - using FCE for final rendering of DV.
Captured DV is the same quality (both fields) for all 4 of above.
Message was edited by: Serhij

Similar Messages

IMovie to iDvd chapters not showing up?

I have a great film of a relatives wedding that I edited in iMovie I then sent it to iDvd figuring I could chapter it when it got there. I was wrong. You have to enable an advanced menu then chapter the movie in iMovie. I did this then decided to Export at 640x480 so that I would have a real video file to import into iDVD incase something went wrong. (when I had sent the movie to iDVD the first time it showed up in the DVD menu but I did not have a real file anywhere so if I deleted it from the project I would have to spend another two hours to add it back in.
When I added the exported 640x480 movie to a new iDVD project it found no chapter markers. Ok fine so I went back into iMovie and sent to iDVD. This time I let it run over night and when I checked it in the morning it had an error and could not complete. I dont wish to waist another two hours on something that isnt going to work. I have searched all over the internet for how to add chapters between iMovie and iDVD but all of the articles are outdated and all apple has to say is that they both provide support for chapters but no help documentation walks you through the process. Can someone please explain to me the best way to go from iMovie to iDVD and have my chapters? Do I need to use a special project that supports a scene selection or something? I need to make a 4:3 DVD.

Ziatron wrote:
Use iMovie 06 with iDVD 08/09, why?
I don't like editing style of iMovie HD. It is painful to follow the subject and change camera angle. iMovie 09 gives freedom of creativity.
Ziatron wrote:
iMovie 08/09 uses 'single field processing' meaning every other horizontal line of the video is _thrown out_, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
iMovie 06 and iDVD 08/09 is a "lossless" combination.
With iMovie HD you are right up to the point when you need one project at disk. As soon as you need several clips to be present at one DVD disk this approach is not working anymore.
If you export projects to DV stream by QT _both iMovie HD and iMovie 08/09 do the same bad trick with you - single field._ The workaround of this issue - using FCE for final rendering of DV.
Captured DV is the same quality (both fields) for all 4 of above.
Message was edited by: Serhij

IMovie to iDvd problem /frozen frame on DVD

i produce many videos with iMovie and iDVD every day. the imported video footage via different cameras like sony cx105 or panasonic sdr 150 works fine and i can see the footage without problems in iMovie. after editing and rendering in iMovie, sending the footage to iDVD i can see that sometimes, while encoding the footage in iDVD the video footage freeze but iDVD finish the whole procedure. later while watching the dvd the movie runs for a while and than suddenly the video freeze at one frame but the audio continues.
this happens in around 15 burned dvd 1 times. if i try to start the whole iMovie project again and sending it to iDVD after rendering and even by cutting the frozen frame shot out the same thing happens again.it seems that there is somehow an error while importing the footage from the sd card or camera into the computer iMovie. the following error message comes up:
21.06.09 12:00:15 [0x0-0x10010].com.apple.iMovie8[102] Error: MPEG2Decompressor[0x1f3f8a50]: bad picturecodingtype (number = 85, size = 148628)
i am using iMacs with 10.5.6, ILife 09 mit iMovie 8.0.3 oder iMovie 8.0.2
Please help! Thanks!!!

Hi
Most probably iDVD pref file - trash it - or even better start a new User-account
log into this and have a re-try.
Else
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
Yours Bengt W

Imovie/idvd chapters

When I create a IDVD project from Imovie I add chapters in the project. I do not put one at the begining of the projet as recommended by Apple. In IDVD a chapter named Beginings is created. But this chapter is the whole IMOVIE project. I expected it to be only a chapter up to the first chapter marker I put in IMOVIE.
Am I doing something wrong?
Rolly

Chapter markers are only entry
points to your movie. They are not self contained
"mini-movies" that will only show that chapter. What
ever chapter you pick, you will start at that point
but then continue to the end of the movie.
Patrick
Thanks Patrick,
That makes a lot of sense. I should have thought of that.
Rolly
(from Mass.)

Using WindowsDV .avi files in iMovie and iDVD

I'm about to buy a Mac after using PCs for many years. I'm still deciding whether to buy an iMac 20", upgrade the Ram and use an external firewire drive or to get a Mac Pro and use internal drives. Initially I'll use iMovie and iDVD and I have some questions regarding using files I've already created on my PC. Up until now I've mainly been using Ulead Video Studio 10 and Ulead DVD Workshop. DVD Workshop does not do 16:9 menus and has now been discontinued and I've been impressed with iMovie and iDVD when I've seen it in Apple stores.
I have some unedited 16:9 .avi files that I've captured from my Panasonic GS-400 camcorder as well as some already edited .avi and .mpg files. Will iMovie and iDVD recognise .avi DV files when accessed through my network or copied onto the Mac hard drive? I'll load unedited clips into iMovie for editing but anything that's already edited I'd like to put straight into iDVD, add chapters and make a menu etc.
Is this going to work easily or will I have to convert the files to an apple compatible format?
Thanks for any advice you can offer.
Ken
Windows XP Pro

Hi Ken and welcome to Apple!
You should not have a major problem. The AVI files should (repeat should) be recognized by iMovie. If not, conversion should (I love the certainty of that word!) be easy.
An iMac will do all you ask, but I recommend not less that 1GB of RAM.
At this stage, go get your iMac, and try to import the AVI files into iMovie. If that is not successful post back!
Remember: iMovie expects to be 'fed' by digital video through a firewire connection.
Any more questions, we are here to help!

What's the difference between iMovie and iDVD?

What's the difference between iMovie and iDVD?

iMovie enables you to edit video footage - typically from a video camera - add titles, effects, etc.
iDVD enables you to create an authored DVD of your iMovie, complete with DVD menu, chapters, "extras", etc and can be played in a conventional DVD player.
20" iMac Intel Core Duo 2GHz 1GB RAM Mac OS X (10.4.7)

Are there glitches in iMovie or iDVD that would create problems with viewing a finished project on a standard dvd player?

Everytime I render a new project in iMovie and share it with iDVD to produce a video, there always seems to be glitches in the finished project. I have gone back and tried to recreate the slideshow, but have not had a whole lot of luck. I am wondering if I need to delete the iMovie and iDVD applications from the computer??? If I do that will it fix my problem or will I even be able to redownload the programs without having to pay for them again? I have spent more time and $$$ trying to get a viewable disc to burn and am ready to get rid of the computer altogether. Hopefully that will not have to happen, but this is a constant issue that I go through everytime I work on a project. Any suggestions???

Hi
Yes and No.
There are Bugs and ways to make better or Worse DVDs - see if this can help.
There are two "Bugs" (or at least one)
• In iDVD - do not go back to video editing program - if You got Chapters set in Your movie - if You try - then now back in iDVD it will ask You to up-date ==> all Chapters will point to Chapter one. Medicine - create a brand new iDVD Project.
• There MUST NOT BE any Chapter mark set in very beginning of the Movie - or in any transition or within 2 seconds from them.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser ( AND AS MEDIUM - not HD etc as DVD then will suffer in quality ) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Can't get my iMovie into iDVD 4.0.1

I am having great difficulties getting my iMovie into iDVD. (Have made many dvds in the past from iMovie and never had a problem so this is new.) I have tried every way to do it (when previously had no problem just clicking on "Create DVD" pane). The movie won't show up on iDVD when I do this now. Either just "My Great DVD" comes up or a previous iDVD project. I have tried via Share/iDVD; I have tried to import from iDVD (get an "unsupported file type - invalid video" message). Any ideas? Thanks!

The movie that's in the iDVD folder (of the Shared Movies folder) contains chapter information. If you imported that movie to iDVD, iDVD should have delivered chapters.
Make sure your iDVD preferences are set to accept chapters.
If nothing works, this failure of iMovie 5 to export to iDVD suggests some kind of underlying problem. I suspect something is corrupt in the video or audio content.
Try importing that made-for-iDVD movie I mentioned to a NEW iMovie 5 project. (Drag it to the Timeline of the project.) That should deliver "cleaner" video/audio. Add your chapters to THAT project, send it to iDVD. Everything might start working as it should.
Karl

Sectioning videos using iMovie and iDVD

I did my first conversion of some video from Mini-DV to DVD using my new iMac yesterday. I read the "Getting Started" tutorials for iMovie and iDVD and successfully burned a DVD. It came out good in the end, but I'm not sure I did things the best way. I wanted to section the video so when I watch the DVD I can click on a "button" from the menu for whatever section I want. So, I transferred all the video from the camcorder to iMac. That was easy. Then, I went into iMovie and marked off the sections of the video I wanted as "favorites" and it put a green line above it, then I selected the option for it to only display the favorites. So, it was easy to edit out the bad parts. Then, I dragged it all from the Event Library to the Project Library. I went to Share-Media Browser and clicked on Publish. Then, I went into iDVD and was able to get the video into it. But, I couldn't get it into sections like I wanted.
So, I went back into iMovie and did a File-Duplicate Project and named it with a "-1" at the end. Then, in the Event Library I selected the first section of the video (so it had the yellow boarder around it) then dragged it to the Project Library. Then, I did a Share-Media Brower and clicked on Publish. I went back to the original and did a File-Duplicate Project and named it with a "-2" at the end, and repeated the whole thing for the next section. I did this for each section, "-3", "-4", etc. Then, I went into iDVD and was able to get the video into sections like I wanted. I renamed the "-1", "-2" stuff to what I wanted and burned the DVD.
Did I do this right or did I do this the hard way? I have iMovie '08 7.0 (471) and iDVD '08 7.0 (1068).
Someone told me that the "sections" I'm referring to are called "chapters". I did a search for chapters and the only reference I can find is in the "iMovie '08 Getting Started" document where it says "Click Import. You can also import video from a project created in iMovie HD. … All chapter markers are also lost".

I would consider the usage of iMHD6 plus a slightly different 'structure' of workflow and final DVD ...
'problem' with Chapters, as they are implemented in iDVD, is, that they really functioning just as a bookmark... you jump directly to some specific position in timeline.. but then, the disk play 'til the end of a movie... (showing the next and the next and... chapters...)
iDVD allows sub-menus, think of it as 'Folders' ... which also could keep Folders..
create a movie, showing the whole program/dance...
now, select (in iMHD6) the few clips which show 'Right Hand Pass'
in the Export/Quicktime/Full Quality dialog of iMHD6, check the box 'selected clips only' ...
now, you get a/many .movs on your harddrive, with all the individual segments ...
due to lossless export, you can import that short clips into new iM projects and add content.. a slow-mo, a chart, some narration, recordings of other dancers doing the same 'move' etc ...
in IDVD, switch to 'map view' .. illustrated how-to here:
http://www.apple.com/ilife/tutorials/#idvd-create-67
now, create a structure for YOUR how-to... on top should be a button for the movie which shows the whole dance; create a sub-menu containing other sub-menus for 'spins', 'turns', 'passes' (= I have NO idea of Square Dance ); inside each sub-menu item (which is a 'Folder'), you place the concerning clip(s) (drag'n drop/choose form Media) ...
structured that way, you are allowed to add much more than just a chapter = a part of your movie; editing a 'standalone' clip of your section allows to 'process' that part, as mentioned above: you can repeat it, you can add slowmos, you can add stills/charts/paintings, explaining specificly that 'move', add a narrated and a no-audio version, whatever ... there's a nice plug-in from geethree.com for iMHD6, *Slick 6* (click here), called 'White Board', which allows drawings on videos..
when the 'chapter', which is now a clip/movie on its own, is finished, the dvd will jump back to the menu/submenu... and the viewer is allowed to watch it again, choosing the next one, a different one, or jumping to 'top level' to choose a different section or watching the whole dance...
only limitation: all movies added together should stay under 120min..

IMovie to iDVD, audio is scrambled.

Greetings
I have been using iMovie to iDVD for sometime now, though I am no pro, I have never encountered this type of issue. I have about 100 clips which I are now in iDVD. While verifying the clips and titles, etc., I played a few of my 12 chapters. I noticed that the audio was 'scrambled'; the audio can't be understood at all! Too weird. (There is no problem with the video).
Now I must admit that I am using different audio tracks than ever. For much of the video, I have set the 'main' audio to 25 or 50%, while the secondary audio has music, which is set to 50 to 70%.
I can't seem to figure out why this is happening. And to clarify, 'yes' the audio and fades are great in iMovie.
Your help has always been helpful, I thank you now for your help in helping me figure this one out.
Martin

Martin,
Try going back to iMovie and use the command "extract audio"
This separates the audio and video in your DV stream. You should still be able to set volume controls. Then try again in iDVD.
Also check your audio (from the video) is it 16bit?
John

Sharing a file from iMovie to iDVD

I've created a movie in iMovie. I click "share" and "iDVD." it takes a few minutes and creates the movie and finally iDVD opens. As soon as it opens I get a "ding" and a window comes up saying "missing Files"...the rollowing files could not be found: /private/var/folders/43/43bTcdKwELG7cKshNoSAr+++TI/-Tmp The type of file says "picture." i have 2 options..."cancel" or "find file." I click find file, it opens up a window to look for it and I obviulsy have no clue where it is and running searches on the computer can't find it either. I'm going nuts now.
I have a 2.16GHz Inter Core 2 Duo with 1.5GB 667 MHz DDR2 SDRAM
I don't know a lot about computer so if you're got any pointers, please pretend your helping your mother. or grandmother. lol. I'm 35 and use computers a lot but not good no the back-end of things. That what she said. save it. help a brother out here, would 'ya?

I know, it's odd.
Or I'm incredibly stupid, which...
I imported my iMovie into iDVD with chapters marked. When I went to burn the dvd after selecting my theme, a warning popped up that said something like, "There are problems that were mentioned if you continue it won't work". When I clicked on the map, there was a theme file that I had clicked on inadvertently while working with the actually theme I had chosen, that somehow ended up connected to my chapters. In the map, it went from My opening theme, then branched out, one to the full film and the other branch went to this errant theme-file thing, and from the errant theme file thing was the branch that connected all my chapters. If I try to delete this theme (the 'my trip to Venice' one) it takes all my chapters with it (they too are deleted) because of the connected branch.
I will most happily except stupidity if this 'thorn' could be removed from my iDVD.
Thanks so much!!!

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

This is my first time using iphoto, I am trying to make a slide show that I can then burn to a dvd. The slide show is complete, but I'm not sure where to go now. Can I burn the slide show from iphoto or do I have to export to imovie or idvd?

I have completed the slide show i am making, but not sure what to do now. I want to burn it to a dvd, but not sure if i can do that from iphoto or do i need to export to imovie or idvd? If i need to export, will iphoto save a copy in iphoto? This may be really stupid, but I don't see an obvious way to save my slide show in iphoto. Please Help!

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
NOTE: If you're running iPhoto 9.5 the export options will be different.
OT

Updated to iLife '08 and now iMovie and iDVD won't Start

I received a copy of iLife '08 for Christmas and finally got around to upgrading today. The new iPhoto works just fine but when I try to start iMovie, it crashes (I have included part of the Problem Report below). I have tried restarting and it doesn't help. Then I tried to start iDVD and it flashes the "Welcome" / "Open" screen and then quits before I can do anything -- no error report. Any ideas on how to:
1) Fix both programs so they will launch -OR-
2) Restore the old versions of iMovie and iDVD
Thanks!
Process: iMovie [345]
Path: /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier: com.apple.iMovie7
Version: 7.0 (471)
Build Info: iMovieApp-4710000~2
Code Type: X86 (Native)
Parent Process: launchd [104]
Date/Time: 2008-01-02 15:53:31.019 -0500
OS Version: Mac OS X 10.5.1 (9B18)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Application Specific Information:
* Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Creating more than one Application'

Run Software Update (under the Apple menu) and update that software.

I keep getting the following error message while sharing my iMovie to iDVD. "Unable to prepare project for publishing" error (-2125).

I keep getting the following error message while sharing my iMovie to iDVD. "Unable to prepare project for publishing" error (-2125). I'm running iMovie 09 v. 8.0.6 on a iMac with OSX v 10.6.8, 2Ghz core duo, 1GB 667 Mhz DDR2 SDRAM. Any ideas why?

That particular error comes up for a number of reasons, sometimes it's the size of the movie you're trying to export. Bengt Wärleby a longtime contributor to the iMovie Discussion Group has advised a number of people on this error code, so I am going to link to his latest advice he's given to anyone trying to export to DVD from iMovie: Bengt's tips for great DVDs.
Specifically, try bypassing Share to iDVD by using Share to Media Browser instead.
In the Share to Media Browser dialog box choose the Large Size.
When(If?) it gets through that process, quit iMovie altogehter then go to iDVD.
Create a new project and click on the Media button near the lower right hand side of the Project Window.
Then click the Movies button in the Browser window just above that.
Under the iMovie star icon you should see the name of the project you shared out from iMovie.
Drag that into the project and burn the DVD.
If it's still to large or you get the same -2125 error code trying to Share using the Medium size instead. But again if you really get stuck consult Bengt Warleby's User tips:
Bengt's tips for great DVDs

IMovie to iDVD - Chapters frozen

Similar Messages

Maybe you are looking for