Imovie video does not run on PC with quick time!!!

I have produced a video on a Mac with imovie V 9.0.8 and exported via Quicktime. I tried to view the video on a PC with quicktime 7.7.3. Unfortunately this is not possible!! A simple link to a page with a number of third party suppliers should help! I do not have time and motivation to search in the jungle of codecs and secrets to find a correct solution.
What codec did you use for the export? I.e., It is most likely the video codec used for your export is causing the problem as it may not be included in the basic QT codec component package. (E.g., the Apple Intermediate Codec is only available on the Mac.)
I do not understand apples policy. It is the most difficult thing to make a video and find a format that can be read with current software.
If you exported the file for playback on a PC and selected or allowed a defaulted codec not available for the PC to be used, then the problem is self-inflected. The normal export combination would be H.264/AAC in an MOV, MP4, or M4V file container. Assuming the file was properly terminated and transferred between systems, any of these files should be playable in QT on your PC (as well as other third-party players like VLC, MPEG Streamclic, etc.)
What can be done?
The best option would probably be to re-export the project to any format known to be compatible with your PC QT install.

Similar Messages

I tunes does not play mp3 file, but quick time does. why?

I have download mp3 files from internet and some of them i tunes doesn't not see and play. I tried to play it with quick time- good, not problem. But i want to add it to my i pod. How can i do it? How can i play it with i tunes? maybe i need some codecs? please help me

It could be you're not adding the files the right way. In more seldom cases:
[Topic : MP3 Scan+Repair - an ID3 tag evaluator for the Mac|http://discussions.apple.com/thread.jspa?threadID=2020936]
MP3 Scan+Repair (including sources): [http://triq.net/mac/mp3-validator-mac-os-x]

Video does not play in safari with QT7.3 update

just as last time quicktime was updated, this version does the same thing. after updating to QT7.3 videos no longer play in safari. i went to the apple trailers site, i get the sound but no video. last time the solution i found was to remove the quicktime plugin from the plugin folder in the library folder. i did that same thing this time, and it still does not work.
any help on this one? using a powerbook g-3 pismo, with os 10.4
thanks

Hi tfu47 and welcome to the forums!
No such problems here - which I know doesn't help you!
Did you close all applications before installing the update? Did you restart as instructed? Did you repair permissions?
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them).
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz.
Important: Now repair permissions and restart.
The world should now be your oyster!
You should also have the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

HD video does not run smoothly in Premiere Elements 7

I have been using Premiere Elements 7 to edit short videos for a couple years now with my standard definition camcorder. I recently bought an HD camcorder. It is impossible to edit these videos in the timeline as they don't run smoothly at all. The raw videos themselves play perfectly but not in Premiere. How can I fix this? Is there a way to lower the quality of the videos temporarily in the timeline just so I can edit them with the finished product being in HD?Will upgrading to Elements 10 fix the problem?

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
How are your hard drives configured?
My 3 hard drives are configured as...
1 - 320Gig Boot for Win7 64bit Pro and all program installs
2 - 320Gig data for Win7 swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folder and files
3 - 1Terabyte data for all video files... input & output files (*)
(*) for 4 drives, drive 3 all source files & drive 4 all output files
Search Microsoft to find out how to redirect your Windows swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Videos not playing in iphoto with quick time/// pictures disappearing for good..

upgraded to snow leopard. I used to be able to double click on my videos in Iphoto and they would start playing in quicktime. Now when i double click my videos, its not even acknowledged that i double clicked them at all. my video ONLY plays if i drag and drop the video on my desktop then double click. ALSO, when i merge photo events together in my iphoto or just move them around in iphoto they disappear and i cant find them anymore, forcing me to get out my time machine an back up to when i had those photos again... and i heard that iphoto 11 is not a good buy.. please help on this too thank you..

well nevermind anyway... i bought LION and ILIFE11..... things seem to be in shape now...

ITunes not running after Safari and Quick Time update

HELP NEEDED!!After updating to the latest version of Safari and Quick Time, i got this error message the next time I started my computer:
"AppSyncNotifier.exe: The program can't start because CoreCoundation.dll is missing from your computer. Try reinstalling the program to fix this problem."
I tried to open iTunes but I can't. I tried to uninstall so I can reinstall but it I got another error message that said I do not have the rights to uninstall, etc. I am the only user of this computer and I have admin rights. This PC used to run on vista but I recently upgraded to Windows 7(x64) and I encoutered the same problem - i could not uninstall/reinstall iTunes because "I do not have permission"
After upgrading to Windows 7 iTunes was running okay until the Safari and Quick Time update.
I need to sync my iPhone and iPod but without iTunes I can't!!!
PLEASE HELP!!! PLEASE, PLEASE, OH PLEASE!!!!

b noir wrote:
What a strange collation of errors. Taken at face value, each of the three suggests a different problem. Working on an Occam's razor sort of principle, that one underlying problem is going to be more likely than a perfect storm of three different problems at once, I think we'd better try checking on troubles with administrative privileges first.
Let's try doing a "run as administrator" on an iTunes uninstall first.
Download and save a fresh copy of the itunes installer to your desktop.
http://www.apple.com/itunes/download/
Now right-click on the iTunes64Setup.exe file you downloaded and select "Run as administrator".
Since you've already got that version of iTunes installed, you should eventually get to a dialog asking you to repair or remove iTunes. Select Remove.
Does that go through without the "Windows Installer" message?
If so, reboot the PC and then try another "Run as administrator" of your iTunes64Setup.exe. Does Apple Application Support get installed for you properly this time?
Thanks again b noir. Unfortunately, this suggestion did not work. When I did what you said, there was no option to "remove". I see the iTunes thing on my control panel-programs window, but it's no longer in the program (x86) folder on the c:/drive. iTunes on my computer is like gum stuck to my shoe. same goes for bonjour. Please be patient some more. Do you have any more suggestions?? I'm planning to get me an iPad but if I can't get iTunes to run properly on my computer I'm having second thoughts about it now.
Thanks!

Itunes 7.1 does not run. Issue with your audio config detection

Hi,
Since I updated to itunes 7.1 the following error message comes up each time I start the program "Itunes cannot run because it has detected a problem with your audio configuration" This happened for the first time right after the update and I have tried to downgrade to the previous version (which was working fine) but now this error occurs with previous version too.
My sound card is a creative sound blaster x-fi and I don't see anything wrong with its configuration.
The OS is Vista premium
Thanks to anyone who can help me with this.
DELL Dimension E520 Other OS Vista and creative sb x-fi

the following error message comes up each time I start the program "Itunes cannot run because it has detected a problem with your audio configuration"
typically that's caused by a broken QuickTime. (iTunes uses QuickTime for audio and video playback.) see the following document for troubleshooting instructions:
iTunes 7 for Windows: iTunes had detected an audio configuration problem

Run time error elements 10 tried everything on web help pages, rename reload still does not run, works fine with edit

How do i fix it

Hi 8tharmy,
It's hard to tell what this error triggered, Best approach will troubleshooting the issue and narrow down to the root cause. Best KB provided by Adobe you find here.
Windows: https://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html
Mac: Troubleshoot system errors, freezes | Mac OS 10.x | Adobe software
If you like help please share some additional information in this topic or share the result and the issue statement with Adobe support. Learn & Support

CallableStatement does not run PL/SQL with jdbc:oracle:thin driver

I have a very simple PL/SQL function:
FUNCTION CalculateDistance
(x1 IN NUMBER, y1 IN NUMBER, x2 IN NUMBER, y2 IN NUMBER)
RETURN NUMBER
AS
distance NUMBER;
BEGIN
distance := SQRT(POWER(x1-x2,2) + POWER(y1-y2,2));
return distance;
END;
I call it with:
CallableStatement cs = null;
try {
biomassStatement = con.prepareCall("{ call MYPACKAGE.CalculateDistance(?, ?, ?, ?, ?)}");
cs.setDouble("X1", -367546.78402892);
cs.setDouble("Y1", 150712.8161204);
cs.setDouble("X2", -2155095.49289);
cs.setDouble("Y2", 774013.149084);
cs.registerOutParameter("v_Return", OracleTypes.NUMBER);
cs.execute();
The only answer I get is:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'CALCULATEDISTANCE'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
I tried it with different Data sources (common, pool, XA) and nothing works...
Tried using ojdbc14_g.jar to see if could get more information with no help...
HELP!!!

Hi,
You are calling a FUNCTION, i.e you have one return value (And four arguments)
So according to javadocs
http://download.oracle.com/javase/6/docs/api/java/sql/CallableStatement.html
Your synbtax should be like:
{?= call <procedure-name>[(<arg1>,<arg2>, ...)]}Rigtht now, your call seems to be for a procedure having five arguments.
Regards
Peter

Youtube, Facebook Videos does not run on N900

Hello, any one could help me I am facing problem for Flash upgrade for youtube and facebook videos, I had also install Tweak Flash plu then changed it to Linux, 9.0.277(PR1.3) and also set to Linux 10.0.45(Desktop) but again shows same messgae when I played the video upgrade the flash.
Is there any solution for this ?
Thanks
Solved!
Go to Solution.

usan14 wrote:
Hello, any one could help me I am facing problem for Flash upgrade for youtube and facebook videos, I had also install Tweak Flash plu then changed it to Linux, 9.0.277(PR1.3) and also set to Linux 10.0.45(Desktop) but again shows same messgae when I played the video upgrade the flash.
Is there any solution for this ?
Thanks
youtube videos should work on lower flash, i just watched the nexus s review by phonedog on my n900 without tweakflash version installed, do you have adblock plugin installed ? or did you download any browser plugin ?
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

Montly depreciation simulation does not run for asset with custom depr keys

Hello!
Some assets in report S_ALR_87012936 display annual depreciation simulation even if only a period of the year is selected. For those assets a custom depreciation keys is defined. Is that a problem?
Could I found a way to simulate depreciation for a part of the year for those assets yet?
Thanks
Giovanna

hi,
ccheck your settings in trx. S_ALR_87009113
A.

FCPX10.1.1 does not solve the problem with long-time clip editing!

OS: clean installed mac os10.9.1
FCPX: FCPX10.1.1
Project: 4clips, all of the clips is about 1 hour long (dvcprohd)
Disk: 900MB/S++
machine specs:
2*3.06Ghz 6-core
24GB DDR3
and I've tried these graphic cards:
K5000
and
2 5770
all get the same results:
If I double press the "L" key, the response of FCPX is too slow
If I do other operation like browse the clip, or import long time clip,
the FCPX will become too slow to browse the timeline.
I've found the FCPX like to generate audio waves of the clip and
there's no option to shutdown this! I've tried all the options in FCPX like
do not show the waveform of audio in preference and close the audio waveform in timeline
I don't think I can work the project with 10.1.x.
the 10.0.9 also has the 1st problem, but don't have the 2nd problem.
Another project: 2000++ 4K 50P clips(XAVC), but on FCPX 10.0.9, all of the clips is less than 40mins, always 20seconds.
though it will get slower when we import clips day after day,
it's much more smoother than 10.1.1!!!!!!
so,
I don't think we should update to 10.1.x for the little promotion of performance.
and 10.1.x also do not support nvidia K5000 card.
the render is slower than ait5700.....
I hope apple can solve the problem,
all of the above is just basic editing needs!
if the fcpx can not do even a long-time clip editing
why should I use it?

2 project:
1. 4*1 hour clips dvcprohd
that's the problem! I can not bear it.
2. 2000++clips 4K XAVC 50P project which I don't run on FCPX 10.1.1
I run it in fcpx10.0.9, it's fine, but slower when I imported more and more clips.
until now I can bear it.
the fcpx10.1.1 editing long-time clip has problem:
1.
it use 150MB/s harddisk speed to generate the waveform.
I have 900MB/s disk speed, so that's not the problem,
but it generate all the time!
1 hour clip's wavefrom generates for 1 hour without stopping, if I stop it , the fcpx crashed!
2.
when I skimming the clip for editing, the fcpx gets slower, always 2mins to response my operation.
3.
when I double press J or L key, the fcpx will need about 1 min to response.
the FCPX10.0.9 editing long-time clip problem:
the fcpx10.0.9 can handle the long-time clips, but also has very slow response when I doulbe press J or L key.

Javaee6 sample does not run on remote GF 3.1

I installed javaee6 with samples:
java_ee_sdk-6u2-jdk-linux-x64-ml.sh
I can run "automatic-timer" sample properly, when GF 3.1 runs on localhost.
If GF 3.1 runs on a remte host.
I set the remote GF 3.1 in bp-project/build.properties:
javaee.server.name=192.168.1.101
Now automatic-timer sample does not run:
[java] Waiting for the timer to expire
[java] Logged timeouts :
[java] org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No
[java]      at sun.reflect.GeneratedConstructorAccessor30.newInstance(Unknown Source)
[java]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[java]      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
[java]      at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:248)
[java]      at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:95)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.handleFullLogging(WrapperGenerator.java:387)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.access$400(WrapperGenerator.java:107)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator$2.invoke(WrapperGenerator.java:511)
[java]      at com.sun.corba.ee.spi.orbutil.proxy.CompositeInvocationHandlerImpl.invoke(CompositeInvocationHandlerImpl.java:99)
[java]      at $Proxy26.connectFailure(Unknown Source)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:257)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:270)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:129)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:223)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:228)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:393)
[java]      at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
[java]      at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
[java]      at com.sun.enterprise.naming.impl.SerialContext$ProviderCacheKey.getNameService(SerialContext.java:1241)
[java]      at com.sun.enterprise.naming.impl.SerialContext.getRemoteProvider(SerialContext.java:411)
[java]      at com.sun.enterprise.naming.impl.SerialContext.getProvider(SerialContext.java:347)
[java]      at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:504)
[java]      at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455)
[java]      at javax.naming.InitialContext.lookup(InitialContext.java:392)
[java]      at enterprise.automatic_timer_client.AutomaticTimerJavaClient.getRecords(AutomaticTimerJavaClient.java:64)
[java]      at enterprise.automatic_timer_client.AutomaticTimerJavaClient.main(AutomaticTimerJavaClient.java:53)
[java] Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
[java]      at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:340)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:242)
[java]      ... 15 more
[java] Caused by: java.net.ConnectException: Connection refused
[java]      at sun.nio.ch.Net.connect(Native Method)
[java]      at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
[java]      at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:110)
[java]      at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:325)
[java]      ... 16 more
[java] javax.naming.NamingException: Lookup failed for 'java:global/automatic-timer-ejb/StatelessSessionBean' in SerialContext[myEnv={java.naming.factory.initial=com.sun.enterprise.naming.impl.SerialInitContextFactory, java.naming.factory.url.pkgs=com.sun.enterprise.naming, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl} [Root exception is javax.naming.NamingException: Unable to acquire SerialContextProvider for SerialContext[myEnv={java.naming.factory.initial=com.sun.enterprise.naming.impl.SerialInitContextFactory, java.naming.factory.url.pkgs=com.sun.enterprise.naming, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl} [Root exception is org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No]]
[java]      at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:518)
[java]      at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455)
[java]      at javax.naming.InitialContext.lookup(InitialContext.java:392)
[java]      at enterprise.automatic_timer_client.AutomaticTimerJavaClient.getRecords(AutomaticTimerJavaClient.java:64)
[java]      at enterprise.automatic_timer_client.AutomaticTimerJavaClient.main(AutomaticTimerJavaClient.java:53)
[java] Caused by: javax.naming.NamingException: Unable to acquire SerialContextProvider for SerialContext[myEnv={java.naming.factory.initial=com.sun.enterprise.naming.impl.SerialInitContextFactory, java.naming.factory.url.pkgs=com.sun.enterprise.naming, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl} [Root exception is org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No]
[java]      at com.sun.enterprise.naming.impl.SerialContext.getProvider(SerialContext.java:352)
[java]      at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:504)
[java]      ... 4 more
[java] Caused by: org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No
[java]      at sun.reflect.GeneratedConstructorAccessor30.newInstance(Unknown Source)
[java]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[java]      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
[java]      at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:248)
[java]      at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:95)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.handleFullLogging(WrapperGenerator.java:387)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.access$400(WrapperGenerator.java:107)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator$2.invoke(WrapperGenerator.java:511)
[java]      at com.sun.corba.ee.spi.orbutil.proxy.CompositeInvocationHandlerImpl.invoke(CompositeInvocationHandlerImpl.java:99)
[java]      at $Proxy26.connectFailure(Unknown Source)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:257)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:270)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:129)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:223)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:228)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:393)
[java]      at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
[java]      at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
[java]      at com.sun.enterprise.naming.impl.SerialContext$ProviderCacheKey.getNameService(SerialContext.java:1241)
[java]      at com.sun.enterprise.naming.impl.SerialContext.getRemoteProvider(SerialContext.java:411)
[java]      at com.sun.enterprise.naming.impl.SerialContext.getProvider(SerialContext.java:347)
[java]      ... 5 more
[java] Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
[java]      at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:340)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:242)
[java]      ... 15 more
[java] Caused by: java.net.ConnectException: Connection refused
[java]      at sun.nio.ch.Net.connect(Native Method)
[java]      at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
[java]      at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:110)
[java]      at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:325)
[java]      ... 16 more
[java] Exception in thread "main" java.lang.NullPointerException
[java]      at enterprise.automatic_timer_client.AutomaticTimerJavaClient.main(AutomaticTimerJavaClient.java:54)
Why does it use localhost instead of 192.168.1.106 ?
How can I run the sample against a remote GF 3.1 ?
Thank you

I got solution:
Re: Can't access remote EJBs (GF3.1)
I followed the instructions from http://www.java.net/node/676636
and changed "/etc/hosts" file:
1) commented out the "internal" IP addresses in the first two lines
2) and added a the external IP address
#127.0.0.1 localhost
#127.0.1.1 lennyserver
192.168.0.202 lennyserver
The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
Now the InitialContext.lookup() can find the bean.

MOV video does not play

Hello guys,
I have posted a H.264 video clip on my website. It's size is 31 MB. It had played great when I was testing it from my desktop, but once I post it, it does not play. "Q" logo shows up, then the very first frame of the video shows up, but that's it. It does not start to play. Here is the link:
http://www.icebergfilms.com/Video_files/demo1.mov
Any idea what I do wrong?
Thank you so much

Hi Kirk,
reason I am doing all these conversions is to achieve the smallest file possible for internet streaming in shortest period of time. I am exporting my video from Final Cut Pro timeline as QT movie. Then it goes to Compressor to be converted to ProRes to make it progressive and to change frame size. Resulting file goes to Compressor again to be converted to H.264. ProRes is an intermediate codec saving a lot of compression time.
I am trying to check settings during last conversion (from ProRes to H.264): Make it Fast Start and change the audio to AAC. But even though resulting file shows that video is AAC, the file is not any smaller at all. And video does not upload any faster with Fast Start on. So obviously, I am doing something wrong.

Ipod touch with Quick time streaming server

Hello,
I would like to test video streaming in the ipod touch with Quick time Streaming Server.
Please let me know how to do that ?
Best Regards,
Geunhyung Kim

Please let me know how to do that ?
Unless there's an application in the iPhone application store which supports RTP, you can't.
(34712)

Imovie video does not run on PC with quick time!!!

Similar Messages

Maybe you are looking for