IMovie video issue need some advice.

My imported video on iMovie does not playback properly. After dragging a clip to the timeline and playing it I encounter a problem. The video stays in one frame and does not play but audio plays throughout the entire clip. What could be wrong? The imported file format is .mp4. It works flawlessly in QuickTime but for some reason it has issues in iMovie. I can't figure it out. I also want to add that the .mp4 file was transferred via USB stick to my Mac from my PC capture card. I don't know if this has something to do with it. I assume that it shouldn't since a compatible format with iMovie. Any help would greatly be appreciated.

I am running out of tricks. If the following does not work, I would suggest you contact Apple.
Here are two or three more things to try.
1) Right-Click on one of your clips. Then Reveal in Finder. There should be a named iMovie Event folder with all your clips in Apple Intermediate Codec. Make sure all the clips open in QuickTime Player and are full length.
2) If so, it is possible that there was a crash or hang during the thumbnail and analysis generation process that would occur after the transcoding to AIC. So I would recommend you drag to the trash any Folder in the Event Folder such as Image Stabilization, Thumbnails, or Cache. Take care not to delete the real AIC clips. After doing this, shut down iMovie. For good measure, restart your computer. Then restart iMovie. It should recognize this as an event without thumbnails and start to regenerate the thumbnails, stabilization, etc.
3) If that does not work, go back to your original clips. They should be in the iMovie Original Movies folder. Depending on where your Event is stored, this will either be in the Movies/iMovie Original Movies folder on your startup drive, or in the iMovie Original Movies folder at the top level of an external drive. Try reimporting them into a new Event Name.
4) If that does not work, there may be ways of transcoding your mp4 files outside of iMovie, but this should not be necessary. Shout back if you need instructions for how to do this.

Similar Messages

Video blog - need some advice on what to charge

hi, i have been asked to put together a price proposal for producing a monthly video "magazine" for a major company in austria and could sure use some input from the video producer community on what i should charge for such a thing. i am not new to video and work as a veejay and produce other forms of videos. i am working on my own feature documentary. but this is for someone else, and i don't have much experience pricing such a job.
i am the creative designer and director, and would
a) shoot the subject on a DVX100 myself (2-4 hrs on location)
b) transfer and edit the footage in FCP
c) add sound fx and possibly music that i have composed
c) export for the web and deliver a finished 3-5 minute episode once a month.
can any of you more experienced producers offer me some pricing guides? i figured per episode 1000 for creative direction plus 1000 for the shoot plus edit. is that too low? too high? i just want to get paid what is worthy for such a job. they bought my skills based on what they have seen from my existing work.
many thx!
iMac G5, 20, 1.8Ghz, 2GB Ram Mac OS X (10.4.3) power user of pro apps

I VJ and don't use audio engineers or gaffers. If I needed to, I would hire crew in ad hoc, but for most simple productions I get by through pure one-man-band videojournalism. And let's face it, a production for a company intranet/internet site is not the equivalent of filming the next Chanel TVC.
It's always very difficult working out a freelance price. One method is to work out how many hours or days it would take you. Decide what you would expect to be earning if you did that job as a full-time employee. Calcuate the value of your job at that rate, then double it.
I work in the Middle East, where rates are different (and probably much lower). Cameramen here charge US$1,000 a day for shooting. Editing varies wildly. VNRs are usually budgeted at no less than US$1,000/minute (including the basics: production, filming, writing, editing - extra for translations, voice overs, animation). Bear in mind these prices are for western expat crews, in this place you can literally knock off a zero and hire regional workers, given there are no unions and no minimum wage laws here.
For what you are doing, maybe consider at least US$2,000/month, more likely US$3,000 and upwards. I have no clue if these prices are absurdly high or absurdly low in Austria though.

I need some advice about the macbook pro and iPhone 5. I took a video on my iPhone and tried to email it it said it was too big to send? So i downloaded it to my macbook pro and tried to mail it to no avail? The macbook tells me the server won't let it th

I need some advice about the macbook pro and iPhone 5.
I took a video on my iPhone and tried to email it it said it was too big to send? So i downloaded it to my macbook pro and tried to mail it to no avail? The macbook tells me the server won't let it through other mail goes through any ideas how to resize it or what it might take to send it?

I agree with LowLister, the best option for you to share the video online is to upload it to your online storage account for example : Box, Dropbox, SkyDrive (All of them provide free storage beginning from 2GB).
You can upload the files which you want to share in this online storage and then they have sharing options in which you'll will get the link of the file to be sent and send the email. You're good to go!
Tip : You can store multiple files for backup purposes.

Having some serious issues with my iPhone and need some advice

I'm going to these two issues which have been occuring with me for the past weeks-
1.) I am facing a problem with my iPhone 5's lightning port or the cable. This started happening all of a sudden; one second my phone is charging, and the other it is not. Even if it is slightly moved from its position, it would stop charging, and further shaking starts it again, so on and so forth. At first I thought the issue might be with my cable, so I asked my friend to bring his lightning cable to my house so we could test that. It happened again- one shake the phone will charge, another shake stops it. (Note that any kind of movement does this, not only shaking) I'm a bit skeptical about his (my friend's) cable too, though- it shows NOT CHARGING on his iPad while it is in fact actually charging. His cable is only 3-4 weeks old though, so this confuses me even more. I think the issue might be with my port, but as of now I cannot draw a valid conclusion to my problem.
2.) The second problem is that I've noticed my battery drains a **** lot faster now- ever since the first issue started. I manage to get my phone charging by placing it very carefully on the table and it charges overnight. However, when I pick it up in the morning, and read some news, it drains from 100% to 99% in ~60 seconds. This never happened before. Before this, it used to be at 100% for at least 10-15 minutes (might be even more). If I reboot my phone, it shows 100% again, but it still drains a lot faster now. I know because I've been using this phone for the past 4 months now, and I know when it drains and when it does nots
Please, help! I need some advice as to how I should approach this problem. My phone is in the warranty period, however, I would like to have an expert's opinion first.

Hello,
First: I've experienced the same problem with my iPhone 5. I've bought a new charger and it still did the same thing. I went to the Apple Store to get my iPhone checked out and they said that the pins inside my iPhone we're damaged, and I had to get a replacement.
~ Josh

Business Delegate pattern - need some advice

Hi. First let me apologize for the long post. I could see no other way. I�m building a system that quite large and I need some advice. The system is a type of transaction system, let�s suppose a shopping cart. I�m using struts taglibs and tiles for presentation, struts proper for controller, and POJOs for business logic. Also I�m using OJB for my data tier.
Now I�ve been reading Pro Jakarta Struts (Apress), which BTW is a recommended read to anyone with novice experience in struts and related technologies. I�ve assimilated most of the techniques and patterns described in the book, and most of them make sense to me. However, I�ve hit a snag while reading the Business Delegate and Service Locator patterns.
The way I had though of building my application before reading the book, was to have a wrapper class, such as the following:
public class ShoppingCart {
private IAuthenticationService authenticationService;
private ITransactionService transactionService;
public ShoppingCart() {
     authenticationService = new DBAuthenticationService();
     authenticationService = new DBTransactionService();
public login(String username, String password) {
     String sessionToken = authenticationService.logon(username, password);
     return sessionToken;
private boolean isValidUser(sessionToken) {
     bolean validUser = authenticationService.isValidUser(sessionToken);
     return validUser;
public performTransaction(sessionToken, TransactionVO) {
     if (!isValidUser(sessionToken) {
          throw new AuthenticationException();
     transcationService.performTransaction(TransactionVO);
public editPreferences(sessionToken, PreferencesVO) {
     if (!isValidUser(sessionToken) {
          throw new AuthenticationException();
     authenticationService.performTransaction(PreferencesVO);
}My idea was that my wrapper class would isolate all the business logic and could perform login service in case my application was ever to be used with other presentation layer than struts (standalone client, web services). However I believe that this overlaps the Business Delegate pattern and maybe even totally implements it. The way I understand the code I�m reading in the book, they suggest having a BD for each major service such as AuthenticationServiceBD, TransactionServiceBD, etc� However this would break my single point of entry for authenticating users. I really need some advice on my design and how it fits with the BD and SL patterns (or others). I would also like to know what you think/recommend of my authentication strategy.
thanks in advance
Raphael

Thanks for your reply. This however, I understood. My concern is regarding my application in regards to business delegate pattern. You see I have this class (simplified for clarity):
public class ShoppingCart {
   private ILoginService ls = new DBLoginService();
   private ITransactionService ts = new DBTransService();
   // and so on for all services I offer.
   // then I mirror all the calls of my private interfaces
   // and pass them through internally
   public String sessionToken login(String username, String password) {
        ls.login(username, password);
   public boolean addToCart(sessionToken, itemNo) {
        // check session
        ts.addToCart(sessionToken, itemNo);
   // and so on
}Multiple questions for this one:
1) Am I not already implementing the Business Delegate pattern with my ShoppingCart class since all interfaces are private and all calls are mirrored from the wrapper class (ShoppingCart) to the private interfaces? All services are implemented as POJOs and I am not using JNDI at the present so I don't use the ServiceLocator pattern.
2) I store a reference to the wrapper class (ShoppingCart) in the ServletContext so I can grab it from my Action classes. What do you think of this approach?
3) How many BDs should an application contain. In my case I use just one. What is the advantage of using more?
4) I create my own session tokens in case I ever want to use to business code in a non-web applications where sessions are not available readily. This brings about the problem that I can't pass the interfaces directly to the Action classes because the login session needs to be checked before any calls to services. So all methods include a sessionToken parameter which I use to check the session. This way, if I want to expose some of the services through web services, I can still use a login. What do you think of this approach.
5) Any other remarks are very welcome...
I really need help with this from an experienced programmer. Most things I can handle on my own but with this type of design issue, books just don't cut it. I need experience. I would really apreciate some feedback.
Raphael
ps: I would give all my Duke dollars for this (I only have 30), but I'm not sure how. If you want them I can create a dummy question and give them to you.

Songs disappearing. Need some advice.

I need some advice regarind my ITunes library. I spent a lot of time importing all my cd's. I now have approx. 14,000 songs now. First I had put them all in as mp3's, then I heard about the quality and smaller size of AAC. I think that is where some duplicates came from. But some how I've ended up with up to 6 of a lot of my songs, at least it is showing 6 copies of many of my song in my ITunes library. But when I go to delete all but one of the songs, through ITunes, sometimes it is fine and sometimes I get the ! icon. I guess even though I left one in Itunes it actually deleted all copies. I did not know I was doing this because it doesn't show the ! icon until you go back and try to select the song. This took days and days to deleted over 6,000 duplicates.
Now I'm finding some albums are missing songs and some are missing the whole albums even though they show in Itunes. I even have gone through and tried to "FIND" the songs some are really there but most are not. So how to I go about reconstructing the library. Is it best to try and find each one or just wipe (delete) my library clean and just reimport the entire library? I'm talking about reconstructing approximately 12,000 songs and I have no idea how many cd's.
I just would like to know how you guys would handle this. Thanks for your help.
Nancy

miner78 wrote:
Need some advice....I just bought the new retina MacBook Pro (2,199 model) and after reading about the ghosting or burn in issues that some users are experiencing I am starring to wonder if I made the right decision. I am still waiting for my laptop to come in so I can still cancel my order. I'm seriously considering opting for the non-retina MacBook Pro instead. This will be my first Mac and I will mainly be using it to browse the web and do photo editing (I'm an amateur photographer) I know the non-retina doesn't not come with SSD and wondering how much of difference that makes. Any advice, suggestions will be welcomed
That's incorrect:
Order online and for a fee you can have an SSD.

I need some advice...

Hi, I'm not quite sure where this topic should go exactly as it isn't about a specific topic. So plz fogive me if it's wrongly placed in your opinion.
Anyway, I've been a long time fan of Linux and I don't want to have to stop using it. I've just recently converted my whole computer to a linuxbox only system, as I was running winxp(uke) before and couldn't stand it. It would lag during simple tasks like going from one directory to another and for no apparent reason, which aided me in my conversion. Enough about winblows, I don't need to tell you guys why it sucks, we all have our reasons. But there is just one thing bothering me now... and that is gaming. I am a huge fan of gaming and have been doing so for quite some time now (years) and well... gaming on linux hasn't been too pleasant for obvious reasons.
1) the games I play except for quake3 are written and made to run solely on a winblows workstation.
2) Wine and Winex3 have limited, but growing support for a range of games.
3) Lastly the main game I would like to play (Steam CS 1.6) doesn't like to run on linux due to its constant updates, which throws WInex3 out of wack. Where it could have been working the day before but due to the update it no longer runs.
I'm thinking of just making a partition for winxp(uke) so that I can game, but this isn't something I'm totally willing to do.
Basically I need some advice and/or suggestions that anyone is willing to share with me.
Thank you in advance.
BTW: I'm not new to linux, I've been using it for almost 2 years now and have tried ALL of the distro's you can think of. (Arch is my distro of choice at the moment, along with slackware.)

Enemy Territory is an excellent game, and it is totally free.
I haven't played the free game from the US Army, but heard it is really good, and is totally free.
I bought Return to Castle Wolfenstein, which plays perfectly in Single player mode, but I have some trouble in multiplayer mode (and I'm not an expert either).
I bought Unreal Tournament 2004, which plays perfectly in both single player and online, but I simply suck at the game.
I bought Never Winter Nights because I know the company has a linux version you can download once you have a registered copy. I havent installed it yet, though, been playing UT2004.
Doom3 is supposedly going to have a linux installer on the CD's, like UT2004 does.
Anygame that uses OpenGL graphics instead of DirectX will prolly run under WINE or WINEX, or be easy for the original company to port (if they choose to).
There are some "up and coming" linux only OpenGL games, light flightgear (a flight simulator), and a couple of 'massive online games".
Betweet RTCW, EnemyT, Never Winter Nights, UT2004, and soon Doom3 - I have enough games to play, and thats without buying winex.
Fergettabout Windows! You simply don't need it anymore.
If you are determined to run Windows, get a removeable drive bay, and just swap boot drives when you want to swtich. Or use GRUB if you want to select from multiple OS's.
thx

When I burn a disc from a playlist in iTunes, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

When I burn a disc from a playlist in iTunes on my MacBook, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

No, this standard has been implemented for several decades.
How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
It is just conceivable you burned a CD that exactly matched one already in the Gracenote database. Gracenote uses track count and duration to decide what CD it is you have in a computer. If you have one that matches that it will label it. You could conceivably even have one that matches it that is not the correct one.
This script will only work on Macs:
http://dougscripts.com/itunes/scripts/ss.php?sp=cdtexttocdinfo - script to use CD-text file on CD to label CD in iTunes

Dell Live! Value Soundblater card!!!! Need some advice

I have an old 400 that has this card installed model #CT4780. I have purchased a new Dell E30 and want to install this card in it. I have downloaded the driver pack Li'veDrvUni-Pack(ENG).exe. This was listed on the website as the correct one for XP. I notice that in the old computer there is a cable from the card to the CD-Rom and also one from the card to the modem. Are these cables need in the new computer? Also will I have a conflict with the integrated sound card that came with the new computer? I have not done anything expect download the driver pack.
I know some about computers but do not like to install boards and new computers fearing some thing will go wrong. I need some advice and the procedure before I preceded. Any help would be greatly appreciated. Thanks

Newer operating systems, computers, & audio cards do not require the use of the cable from the CD Rom to the soundcard. It is now handled via the IDE cable. Being that you only upgraded half of this equation (that being the computer and not the soundcard), this may be a "trial & error" situation. I do not have the experience with modem cards to comment on that one.
Finally, you will need to disable the onboard soundcard via the motherboard's Bios. Look in the MB's manual to perform this action.
Message Edited by johnston2 on 0-25-2006 06:49 PM

I'm Back! Need some Advice! Rebuild time! 6/19 UPDATE! 2nd UPDATE 7/6/15

WooHooooooo! Another quick update, only 5 minutes ago I found this link on credit karma http://www.creditonecards.com/pre-qualification.php?C1BSourceID=C1B1 that lets you prequalify for a credit card! Which I have tried many many many times only to recieve the message sorry we couldn't prequalify you at this time but here are some SECURED cards you may like which sucks! I decided to try one more time at this link and was totally surprised to get preapproval for a platinum card yay! Mind you, this card is probably the worst card to get and I will probably never ever use it, just need it to help with my utilization scores. The fees are high, the rates are high, the balance is low........but oh well I am still doing the happy dance!!!

izzesparks wrote:
Hi everyone! Long time no see! Just need some advice on what else I should be doing. I have been a part of this forum for many years now and I have taken and heeded so much advice that my head is about to explode and now I just want to make sure I am not forgetting anything. I tried to keep it short Last time I was on I hadn’t reached the 600 club yet. But I am here now in the 600 club! Still the low 600’s but its progress. Unfortunately slow progress because a lot has happened since I was last on here. I am now officially divorced. I finally have permanent steady income, no temp services anymore phew. I have had to reevaluate my budget and cut a lot of things out. No cable, no home phone, monitor my electric bill like a hawk and learn to like the darkness, cold in the winter and the heat in the summer. I have an older smart phone, had to do without the latest gadgets and gizmos, which truly hurts my heart because I am an electronic fiend. No tablets here, no high tech laptops. Instead of buying a new car and making payments I bought a really good used gas-efficient car cash, paid in full. But since it’s still a newer car I am paying for full coverage insurance, my only splurge. I have spent this time away from this forum truly taking heed to the lessons I learned on here and reflecting on my situation. I have paid nearly everything off! It took some time but I only have 2 creditors left ‘that I know of’ to pay.One of the creditors has not reported to the bureaus yet but I want to take care of them before they do. Most of the ones I paid have already fallen off because of SOL. I was getting to the point I had the problem where I didn’t just have bad credit, I had NO credit. I hadn’t opened any new accounts until this year. Just today I opened a $500 Secured Personal loan and a few months ago I opened a $300 Secured Credit Card at my credit union. I also applied for a Quicksilver CapOne card and was approved for $300. I just started school this year and there is now a financial aid loan of $1750 that is reporting on my credit report as deferred right now. I tried to prequal for some more but was denied by all of them. So far only quicksilver would approve me. My plans are to move out of state next May and get an apartment for 6 months while I get the lay of the land and then purchase my FIRST home!! Hopefully everything has aged by then and I have had some CLI’s. My situation in a nutshell (Transunion was only report pulled) USED CREDITCHECKTOTAL TO PULL ALL 3 FICO REPORTS The good:UPDATES BELOW FROM 7/6/15SDFCU Visa Secured $300 – reporting paid on time every timeQuicksilver Unsecured $300 – not reporting yetSecured Personal Loan $500- not reporting yetUtility- reporting paid on time every timeNEW CARDS ADDED-Cap One Platinum MC Unsecured-not reporting yetVictoria Secret-not reporting yetMarisota-not reporting yetSent a Goodwill email for the Portfolio account listed below 6/1/15, now must wait patiently. UPDATE!! 7/6/15 SENT 3 GOODWILL LETTERS NO RESPONSE. The bad: DEBT RECOVERY SOLUTIONS- I PAID IN FULL ON 5/27/15 Haven't found a good email contact to send a GW letter, but the search continues....Original Creditor11 VERIZON MARYLAND INCStatus-OpenOpened Date-Mar 06, 2014Balance -$146 Collection Agency-FCOOriginal Creditor HERITAGE WOODSStatus -OpenOpened Date -Jan 21, 2011Responsibility – Joint (THIS IS IN BOTH MY NAME AND MY EX-HUSBAND, AND HE SAYS HE WILL HELP PAY, BUT HE IS NOT GREAT AT FOLLOW THRU)Balance- $1,912 (They have agreed to settle for less than owed for $978) STARTED PAYMENTS, ASKED SEVERAL TIMES FOR A PFD, EVEN ASKED A SUPERVISOR AND THE RESPONSE WAS A BIG FAT NO, SO I AM GOING TO GO THE GOODWILL ROUTE. Collection AgencyPORTFOLIO Recovery (I ALREADY PAID A SETTLEMENT FOR LESS THAN OWED, ON 5/27/15)Original Creditor HSBC BANK SENT GW LETTER, NO RESPONSEStatus -OpenOpened Date-Apr 15, 2013Balance -$518 Collection AgencyRECEIVABLE SOLUTION (PAID IN FULL ON 5/27/15) THEY HAVE AGREED TO DELETE YAY!Original Creditor MED1 AMERICAN CURRENT CAREStatus OpenOpened Date Jul 25, 2013Balance $101 Collection AgencyUNITED CONSUMERS (PAID IN FULL ON 5/27/15) THEY HAVE ALREADY DELETED FROM ALL 3 CRA'S YAY!Original Creditor MED1 EMERGENCY PHYSICStatus OpenOpened Date Oct 06, 2011Balance -$109 ACS/JP MORGAN (PAID IN FULL ON 2/25/15) Tried several times for a goodwill, no responseOriginal Creditor- Wells Fargo education servicesStatus- closedopen date- 04/2004balance- $3000 ACS/JP MORGAN (PAID IN FULL ON 2/25/15) Tried several times for a goodwill, no responseOriginal Creditor- Wells Fargo education servicesStatus- closedopen date- 04/2004balance- $800 ECMC (TRANSFERRED TO ACS/JP MORGAN) Tried several times for a goodwill, no responseOriginal Creditor- Wells Fargo education servicesStatus- closedopen date- 04/2004balance- $800 ECMC (TRANSFERRED TO ACS/JP MORGAN) Tried several times for a goodwill, no responseOriginal Creditor- Wells Fargo education servicesStatus- closedopen date- 04/2004balance- $3000 A new account was added to my credit report Trident asset - original creditor - Lowe's home improvementI disputed the account since I do not remember ever shopping there, claims I wrote a bad check. I don't even have a checkbook, never have. A new creditor sending letters to me now (boy they sure are coming out of the woodworks, not that I have started paying everyone off) NOT reporting to CRA's yet, going to try to take care of this next week before it does. Sooooooooooo what should I do know????!!!! Thanks in advance for any advice given!

Need some advice on a new build for CS5 Web Premium

I am looking for a powerful PC that I can use mostly for work and some light video work. I have been looking at several systems, but I can't decide if I should get the Core i7 875K, 950 or AMD 1090T for my needs.   I typically have many Adobe CS5 applications open at once like Photoshop, Dreamweaver, Illustrator and Flash, iTunes, Quickbooks, Microsoft Work and Excel. I would ideally like to buy a pre-built rig, but I can surely put together if better. Below are a few I have been looking at, but I am unsure about cooling on one of them and about the 875K processor on the other one. I figured a gaming PC would be fast and powerful as my needs are behond a standard base config. I would like some advice also on a good video card. Been looking at crossfire ATI HD 5770, single ATI HD 5870, Radeon 6870, and GeForce GTX 470 and SLI GTX 460. I am not a typical overclocker, but I can be if it will help performance running apps. I leave my PC on all day and night so cooling is a factor.
Thanks in advance everyone for the advice on this.
==========================================
Approximate Purchase Date: (the closer the better)
Budget Range: ($1000-$1500)
System Usage from Most to Least Important: (Web Development, Graphic Design, Internet, Movies))
Parts Not Required: (keyboard, mouse, monitor, speakers)
Preferred Website(s) for Parts: (newegg.com)
Country of Origin: (USA)
Parts Preferences: by brand or type (I would like to use an Intel Core i7 or AMD X6 CPU to power dual Big 27" Samsung LCDs via DVI and full or mid tower case)
Overclocking: Maybe
SLI or Crossfire: Maybe
Monitor Resolution: (1920x1080 each monitor)
=========================================
Here is my latest config. How does this one look?
Qty.
Product Description
Savings
Total Price
1
COOLER MASTER HAF 932 RC-932-KKN1-GP Black Steel ATX Full Tower Computer Case Item #: N82E16811119160Return Policy: Standard Return Policy
-$30.00 Instant
$159.98$129.98
1
Western Digital Caviar Black WD1002FAEX 1TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive Item #: N82E16822136533Return Policy: Standard Return Policy
$89.99
1
EVGA 012-P3-1470-AR GeForce GTX 470 (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card Item #: N82E16814130550Return Policy: VGA Replacement Only Return Policy
$259.99
1
Nvidia Free Mafia 2 Game Coupon Item #: N82E16800999247Return Policy: Standard Return Policy
-$59.99 Saving
$59.99$0.00
1
CORSAIR HX Series CMPSU-850HX 850W ATX12V 2.3 / EPS12V 2.91 80 PLUS SILVER Certified Modular Active PFC Power Supply Item #: N82E16817139011Return Policy: Standard Return Policy
-$30.00 Instant
$20.00 Mail-in Rebate Card17-139-011
$189.99$159.99
1
G.SKILL Ripjaws Series 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9T-12GBRL Item #: N82E16820231358Return Policy: Memory Standard Return Policy
$269.99
1
LG Black 10X Blu-ray Burner - Bulk SATA WH10LS30 LightScribe Support - OEM Item #: N82E16827136181Return Policy: Standard Return Policy
$109.99
1
Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Quad-Core Processor BX80601950 Item #: N82E16819115211Return Policy: CPU Replacement Only Return Policy
ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Item #: N82E16813131665Return Policy: Standard Return Policy
-$5.00 Instant
-$14.99 Combo
$499.98$479.99
1
Crucial RealSSD C300 CTFDDAC128MAG-1G1 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) Item #: N82E16820148348Return Policy: Limited Replacement Only Return Policy
Microsoft Windows 7 Professional 64-bit 1-Pack for System Builders - OEM Item #: N82E16832116758Return Policy: Software Standard Return Policy
-$10.00 Instant
-$30.00 Combo
$419.98$379.98
Subtotal:
$1,879.90
Calculate ShippingZip Code:    13662   FedEx 3Day Express Saver -- $145.44FedEx 2Day -- $219.19FedEx Standard Overnight -- $263.21UPS Guaranteed 3 Day Service -- $15.97UPS 2nd Day -- $127.74UPS Next Day Saver -- $135.95
Shipping:
$15.97
Redeem Newegg Gift CardsCard Number:                                          Security Code:
Apply Promo Code(s):BFMB
Click here to clear promotion code(s).
Sorry, the promo code BFMB you've entered is invalid.
Promo Code:
$0.00
No Interest if paid in full in up to 12 Months. Minimum purchase required.
Subject to credit approval. See Terms
Grand Total:
$1,895.87

Here is the final config I am looking to get. I am just debating the hard drive config and video cards. I want to be sure my video card will use teh GPU Accelleration and Advance features of Photoshop CS5. Do you know if the NVIDIA GTX 460 is compatable or should I spend more for the 470? I will not be gaming much and this pc is used mostly for work on CS5 Web Premium. How does this all look? All prices from NewEgg. I have another machine I will backup sata to each evening, so I really want a fast drive for program load and operation and another drive for data. What is best way to config drives? Should I get 2 of them and an SSD?
Qty.
Product Description
Savings
Total Price
1
EVGA GeForce GTX 470 (Fermi) 012-P3-1470-AR Video Card
Item #:N82E16814130550
Return Policy: VGA Replacement Only Return Policy
$259.99
1
Nvidia Free Mafia 2 Game Coupon
Item #:N82E16800999247
Return Policy: Standard Return Policy
$59.99
1
COOLER MASTER HAF 932 RC-932-KKN1-GP Black Computer Case With Side Panel Window
Item #:N82E16811119160
Return Policy: Standard Return Policy
-$30.00 Instant
$159.98
$129.98
1
G.SKILL Ripjaws Series 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory
Item #:N82E16820231358
Return Policy: Memory Standard Return Policy
$269.99
1
LG Black 10X Blu-ray Burner - Bulk SATA WH10LS30 LightScribe Support
Item #:N82E16827136181
Return Policy: Standard Return Policy
$109.99
1
CORSAIR HX Series CMPSU-850HX 850W Power Supply
Item #:N82E16817139011
Return Policy: Standard Return Policy
-$30.00 Instant
$20.00 Mail-in Rebate Card
$189.99
$159.99
1
Western Digital Caviar Black 1TB 3.5" SATA 6.0Gb/s Internal Hard Drive -Bare Drive
Item #:N82E16822136533
Return Policy: Standard Return Policy
$89.99
1
ASUS Sabertooth X58 ATX Intel Motherboard
Item #: N82E16813131665
Return Policy: Standard Return Policy
Intel Core i7-950 3.06GHz LGA 1366 130W Quad-Core Processor
Item #: N82E16819115211
Return Policy: CPU Replacement Only Return Policy
-$5.00 Instant
-$14.99 Combo
$499.98
$479.99
1
Microsoft Windows 7 Professional 64-bit 1-Pack for System Builders
Item #: N82E16832116758
Return Policy: Software Standard Return Policy
Crucial RealSSD C300 CTFDDAC128MAG-1G1 2.5" MLC Internal Solid State Drive (SSD)
Item #: N82E16820148348
Return Policy: Limited Replacement Only Return Policy
-$10.00 Instant
-$30.00 Combo
$419.98
$379.98
Grand Total:
$1,879.90

Need some advice on this big project

Hello there!
Let me introduce myself. My name is Wisse and I have been working with Adobe products since I was a child at the age of 8 (10 years ago). Well, then it was called Macromedia Flash but you understand what I mean.
I have always been using flash for making animations and small simple applications (for presentations and games) in my spare time. I also use photoshop and dreamweaver for making sites and other things. So I will soon order the new CS5 web design collection.
I have a big (biggest so far) project coming up and before I really started I thought it'd be best to orient on what Flash application(s) to use and how I will make this project. So here is the plan:
I am making a dutch driving exam site where people can take practice exams for a small text message fee. The application will have to look slick and work smoothly. I made this to clarify what the application has to do.
I have never worked with Flash Builder and Catalyst but I kind of like the idea of making nice looking interfaces using Catalyst and then export them to Flash Builder. But as I just said, I have never worked with Flash builder and so I don't know whether I will be able to make this on Flash Builder (due to it's complexity). Flash builder also has some nice options for accessing external data (the XML, HTTP API and PHP in this case). Catalyst's data list designer and transition animator will save a lot of time and effort when compared to doing it manually in Flash Pro. The big issue here is that I have no idea how to script the rest in Flash builder. the 5 day course might help, but I want to make to be sure that Builder is the best way to go before doing so.
But on the other hand, I am quite familiar with flash and that could also save time. Flash is a bit harder to use when I want to make a good UI and Flash builder wins when you look at the server communication and the debugging tools.
So I would like some advice from some fellow Adobe users. What would you do? What would be the best way for me to go, according to you?
Thanks in advance,
Wisse Jelgersma.

Just to elaborate,
The shape and look of the outside of a car is defined by A) its colour and B) the reflections of the light sources on its surface.
It's relatively easy to change the colour of the shell of the turtle, but making it look reflective is much harder (I didn't do a very good job myself), especially if you also want to keep the textures of the shell somewhat intact.
To light the shell you need to consider what the light sources are that are hitting the shell when it is outside. Reflections of the sky and clouds should be brighter, reflections of the ground should be darker.
In my attempt, I overlaid a landscape picture, warped to roughly follow the shape of the car, then played around with blend modes and opacity and colouration to achieve the above effect. (Although the "specular" highlights could stand to be brought up a bit more). In practice, making this look realistic is probably beyond my skill set.
Then I added the lightning bolt and wheels for fun.
Mike

Movie in DVD is too dark. I need some advices on my steps, please.

in PPro 2.0 i've create a movie with duration of 1h20 minutes. After i have finished i export->Movie using Microsoft DV AVI codec. I obtained a AVI file of 15Gb.
In Encore 2.0, i imported this file and used as my timeline. I also wanted a cool motion background for my menus, with dynamic link i create a composition of 4m:30s with a motion background, is 4minutes and 30 seconds length because i wanted to match the MP3 i choosed to the menu.
back to encore 2.0, i just hit the button to create the DVD. Everything looks as i expected, except the fact that the movie is a little bit dark. i assume i lost quality with the compression? i compared some scenes from the 15GB file(from PPro) and the dvd movie(from encore) and there's the diference. Encore put the movie a little bit darker.
also another facts, i would like some advices. in AE7 when i was creating the motion background before i used Dynamic link with encore i tried a diferent approach, i try to render it to AVI file so i could import in encore. i was soo surprised that the avi file i got was 8Gb(yeah! eight gigabytes) for a 4m37s motion.. i render with default settings.
question: what approuch you guys use? you use dynamic link and let encore handle everything? or you render to a AVI file using AF7 with settings other than default ones, if so, what settings/codecs?
thanks in advance.
Jorge

(Jorge_Costinha) wrote:
Back to encore 2.0, I just hit the button to create the DVD. Everything looks as I expected, except the fact that the movie is a little bit dark. I assume I lost quality with the compression?
Maybe, but probably not.
I'm with Mr. Simon, I think this is a color correction / grading issue, and not an Encore issue. You can't look at a video on a PC monitor and expect it to resemble in any way what you'll see off the computer -- very few PC monitors can show you the Rec.709 color space that HDTVs, DVDs, and BDs use. This is what production monitors are for -- letting you see the "truth" of the signal.
Without a production monitor in your workflow, you'll have to itterate. That is, make a DVD, take it to a DVD player / TV and watch it. If it's too dark, come back to the PC, correct it, make another DVD.... rinse and repeat until done.

I need some advice on compressing a FCP file to archive in Premiere

Here's the situation. I have edited a few projects on FCP - they range from 1 - 2 hours. The client wants a copy to archive on their PC, which has Premiere Pro. I had originally compressed these files to the highest quality H.264, but this resulted in HUGE file sizes that I can't burn onto a data DVD or transfer to the PC due to the FAT32 limitations. I would love some advice on if anyone's done this before and what settings you've used - it needs to look really good so that if needed, this video could be edited more in the future. Thanks for the advice!

Send them tape.

Need some advice on re-install

Hi All
I want to (well I have to) look to re-install from scratch - I am using a Macbook Black and have an issue with Ical, which meant re-installing the ical software
this is deeper routed as the ical issue is still there and althoug I have deleted the software, rebooted and re-instaleld is still there
I would like some advice, as I have done this on a windows machine (after all with windows reinstalling is a annual requirement!!!
1)Firstly is there anywhere that will advice on this process of clearing down my hardrive and reinstalling only what I need
2) can I copy my application folder to my external drive and just move back things that I wish to reinstall
3) how do I back up settings (I dont want issue with settings that may have affected my current instal and corruped Ical
4) is there any files/folders that I should definetly take a copy of
5) and is there any one with experience of doing this, eg rights and wrongs
I'm worried as I use the laptop for both work and pleasure and dont have alot of time to devote to this, with windows I could do this type of thing in about 2 hours any ideas on how long it will take
and how do I wipe the drive?
Thanks in advance

Or, Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Boot from it and make sure everything works.
Once you are certain you have a working/bootable external Firewire Drive, then run Disk Utility to Erase the Internal HD, use the Zero Data Option.

IMovie video issue need some advice.

Similar Messages

Maybe you are looking for