IMovie volume meter shows much red peaking but audio waveform shows none

When I play my movie, the volume meter in iMovie shows peaking in the red (distortion) all over the place, but in the audio waveform there is not one place where it peaks into the red (or even the yellow).  The whole wave is very close to the 0db line.  It sounds great when I play it and still great after I export it.  But, once I upload it to YouTube, there is awful distortion all over the place just like the volume meter in iMovie indicates.  I can't find any place to turn down output so the volume meter doesn't peak and I don't want to turn my audio waveform down below 0db and lose all of my volume.  I already tried clicking on the Normalize Clip Volume in Audio Adjustments and that didn't seem to change anything, still peaking like crazy in the volume meter.  What can I do to get rid of the red peaking and distortion?
Here's a little more info for anyone who can help with my problem.  I am using iMovie 11 on an i7 iMac with Lion.  I turned the audio of my video all the way down and imported another audio that had been compressed in Pro Tools to show no red peaks whatsoever.  Can someone please help?
Thanks,
Loribella

When I play my movie, the volume meter in iMovie shows peaking in the red (distortion) all over the place, but in the audio waveform there is not one place where it peaks into the red (or even the yellow).  The whole wave is very close to the 0db line.  It sounds great when I play it and still great after I export it.  But, once I upload it to YouTube, there is awful distortion all over the place just like the volume meter in iMovie indicates.  I can't find any place to turn down output so the volume meter doesn't peak and I don't want to turn my audio waveform down below 0db and lose all of my volume.  I already tried clicking on the Normalize Clip Volume in Audio Adjustments and that didn't seem to change anything, still peaking like crazy in the volume meter.  What can I do to get rid of the red peaking and distortion?
Here's a little more info for anyone who can help with my problem.  I am using iMovie 11 on an i7 iMac with Lion.  I turned the audio of my video all the way down and imported another audio that had been compressed in Pro Tools to show no red peaks whatsoever.  Can someone please help?
Thanks,
Loribella

Similar Messages

  • My email ico shows a red 15 but I have no unread emails. How can I get rid ot that 15 it is driving me nuts

    My email icon shows a red 15 BUT I have NO unread messages. Can you tell me how to get rid ot the 15. It is driving me NUTS
    Thanks

    If that doesn't work, and you by chance have at least one gmail account, you might actually have unread emails in a folder other than the Inbox.

  • External Drive Files Not Showing Up on Mac but files do shows Up on PC

    External Drive Files Not Showing Up on Mac but files do shows Up on PC
    i had the Ex HD for about 3 years running smoothly on my mac but recently everything disappeared. plunged it into a pc to see if it read my files and it did. what can i do? to make it work on mac again. i don't want to reformat that drive because i have important applications (DMG) and other zip photo video files in the drive.

    yes. i did.
    ...i have tried "verify" & "repair" but they didn't pass the san test. and when i "unmounted/mount" a error message popped up say that there is a application running off the drive but there nothing (i see) running, to close all activity

  • HT2531 Spotlight lists items and shows preview images.  BUT what about showing the location address of an item in my computer. Especially important if I've put the item in the wrong folder and what to locate it without multi-steps. iMac OS 10.5 was more u

    Spotlight lists items and shows preview images.  BUT what about showing the path/location address of an item in my computer.
    Especially important if I've put the item in the wrong folder and what to locate it without multi-steps. iMac OS X 10.5 was more useful.
    Old OSX Spotlight function automatically displayed path/location within the machine:  e.g. desktop/folder/sub-folder/item.
    Can I make Spotlight show the path?

    Press option-command and the path is displayed at the bottom of the little preview window.  Press command-return and the enclosing folder opens. 

  • HT4528 A song I purchased shows up in iTunes, but will not show up on my iPhone.  When the phone is plugged into the computer, iTunes shows that it is on my iPhone, but it is not.  How do I get that song to show up on my iPhone?

    A song I purchased shows up in iTunes, but will not show up on my iPhone.  When the phone is plugged into the computer, iTunes shows that it is on my iPhone, but it is not.  How do I get that song to show up on my iPhone?

    I have the same problem and it only affects the one song, everything else syncs

  • My ipod shows up in itunes, but does not show up on my pc as a drive

    my ipod show up in itunes - but does not show up on my pc as a drive
    cannot figure out why it now doesn't show up

    Maybe
    iOS: Unable to import photos to computer
    Did it show before?
    If you connect to another PC does the iPod show up in My Computer?
    Have you installed only camera or scanner programs on your computer?

  • TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

    I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
    I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • Shows address bar etc. but won't show the actual page, except in "full screen"u

    When I launch firefox it only shows address bar etc. but won't show the actual page, except in "full screen" view. My OS is Windows Vista.
    In other words, I get the top menu bars and the rest of the screen show my desktop background.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • IPhone 5 setting shows connected to wifi but screen only shows 4g

    Any ideas? Settings shows connected to wifi but phone keeps showing 4g by cell signal strength instead of wifi icon

    That's really strange - probably not the answer you want to hear but it might be worth calling Apple Technical Support:
    800-694-7466
    Let us know what you find out and good luck.

  • My voice mail is showing a red dot but there is no message.

    Hi.
    My voice mail is showing a red dot as if there is a message but there isn't. I think it happened when I changed my number, there must have been a message on my old number. I have tried restoring the phone but when I reload from my backup it re-appears. Any suggestions please, it on a 5C.

    I had turned off cellular data on a trip to Mexico. It said visual not available. As someone suggested, I turned off Siri, rebooted the phone, and then the messages I hadn't been able to delete showed up. I was able to delete them. Hope this helps someone.

  • My iPod touch won't show up in iTunes, but charges and shows up on different computers.

    My iPod touch 5th gen last was synced with my iMac a couple weeks ago. Now when I plug it into iTunes, it won't show up. It's done this before and I've fixed it by updating iTunes, restarting the iPod/computer etc, but it seems I've tried everything. I've connected it to different USB ports, and it charges in all of them but doesn't show up. When I plug it in, Dropbox recognizes it and can get the pictures off, but iTunes won't work. I tried connecting the iPod to a different computer, and it showed up in iTunes just fine. I have the latest version of iTunes. I didn't restore my iPod from the other computer because if I can't get it to re-sync with this computer I'd rather not lose all my data. It seems I need to reinstall iTunes, but I don't know how- will it delete all my music that I already have on there?
    Any help would be greatly appreciated, thanks!

    I had this issue, I fixed it by going to:
    Start > Control Panel > Devices and Printers
    Then find the iPod, and Right Click > Properties > Hardware > Properties > Driver > Update Driver > Update Automatically
    The driver had not been automatically installed, and windows found and installed the driver files for me. Took ~90 seconds, and then the iPod began it's sync process almost immediately after. Hope this helps anyone with the same issue! I'd try this before re-installing iTunes.

  • Nano shows in my computer but will not show in devices. tried reset, disable other programs. still no use

    my nano 6th gen shows in windows but does not show under devces. tried everything in the help program but still doesnt show under devices. can drag and drop music into nano from library to top right i pod symbol.

    Hey steven-g1,
    Thanks for the question. The following article addresses the exact symptoms you described, along with a few potential solutions:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thanks,
    Matt M.

  • Sound is out of sync in iMovie and video freezes at a part but audio continues. How do i fix this???

    Can someone please help me. I have even tried the youtube videos and can't seem to get the sound to sync up on my videos in Imovie. Also, one part just stalls and stays on the same frame but the audio continues on fine.
    I NEED HELP!!! This is for school and I can't hand this in all wacked out

    44100 Hz is fine and the audio codec is fine. Most camcorders record at 48000 Hz, but audio CDs are recorded are 44100 Hz, and iMovie handles them well.
    However, your video frame rate is an odd number. A camcorder in the US will usually record at 29.97 frames per second. In Europe, the standard is 25 fps. On some cameras, you also have the option of 24 fps (same as a Hollywood movie).
    Your camera is recording at 14.89, which is about half of the 29.97 standard. I am guessing that the video is from a webcam or maybe a cell phone or still camera.  It is difficult to sync audio over long periods of time if your video is not conforming to the standards. Cameras like this may record at varioable rates, so sometimes you get more than 14.89 and sometimes less. Your best bet would be to make an iMovie project at 29.97 fps, so that it will basically repeat each frame of your video twice to get up to 29.78 fps. Even so, it will drift out of sync over time.
    If you had Final Cut Pro X, you could use the tools in FCP to conform your video and audio to a 29.97 timeline and probably keep it synced better. Long term, your best bet is to use a camcorder that can shoot 29.97 (or 30) fps.
    Short term, I would suggest keeping your clips in your project short. For your 15 minute clip, drag in the first minute, then the 2nd minute, etc. untill you have it all. Even so, it may drift. Detaching audio is probably not necessary.

  • I can not get into my adobe photoshop elements.  It shows it is working but photos never show.

    My photshop elements program never loads.  It shows it is working but no photos ever show up.

    Does the app window show up on launch? Is it Organizer or Editor you are facing the issue with?
    Thanks
    Andaleeb

  • Metric shows real time value but does not show historical data

    I am using OEM 12c.I am facing an issue and I don't know where to look for problem.
    I had created one customized metric for percentage flash recovery area through metric extension.I deployed to it target databases.
    When I check it through Database --> All Metrics it shows me real time value for metric,Collection schedule,upload interval and last upload time.IT is all fine.
    When I check metric value history,
    For all the columns like Last Known Value,
    Collection Time stamp,
    Average Value,
    High Value,
    Low Value
    it shows no data.It even does not show anything in Metric Value History graph.
    Even the metric test in Metric Extension works fine.
    All the client agents are uploading the the data to OEM successfully.
    Any help,guide is appreciated.

    bit late but there are two options on metric creation "Alerting Only" or "Alerting and Historical Trending" - I assume you need the latter to show history so was this option used?

Maybe you are looking for

  • Output not written to Spool

    Hi, Normally, the output of a 'WRITE' statement is written to the spool when the program is run in background. Currently I am running a report in CRM and the output is NOT being written to the spool. Can you please guide me on this if anyone has face

  • ...Can I talk to a human being?

    ...I want to talk to a real human being...

  • Need to generate a single spool for multiple customers in Smart forms

    Hi Experts,                 My Smartform should print multiple customer's data and should generate a single spool,wherein the multiple customers have different languages.When I run the loop with the FM calling the language in a control parameter,I ca

  • JavaScript Error 45

    When I open InDesign CS3 I get JavaSript Error 45, Object invalid, Line 387. Then JavaScript Error 45, Object invalid, Line 345. Then when I try to open or create a new file the application crashes. What can I do?

  • Very Slow Broadband Download Rate from 7mps to 50k...

    Hello everyone, last week my BT Phone and Internet was down and it was fixed on thursday. My phone line works but I noticed my download rate has dropped from 7mbps to 50kbps ever since its fault. Alhtough early this my download rate dropped from 7mbp