Imovie will not recognize Itunes and open my music

I am trying to open music to add to my imovie and when I click on the itunes icon it does not open itunes.
please advise
thanks,

You may want to try trashing your preference files.
For full instructions, see here.
https://discussions.apple.com/docs/DOC-4061

Similar Messages

  • Imovie will not recognize itunes

    All of a sudden imovie will not authorize my computer to play purchased itunes music, It will not allow an older project to play a song that played 3 months ago., or allow a purchased song to be added to a newer project from my library. Do I have a virus? Why wont the imovie recognize itunes.

    You are not alone. The following thread may be of help:
    http://discussions.apple.com/thread.jspa?messageID=7425929&#7425929
    You might try closing iTunes and iMovie and then trashing the files com.apple.iTunes.plist and com.apple.iMovie.plist found in User/Library/Preferences. (The programs will create new .plist files upon relaunch.) Then do a permissions repair using the Disk Utility app on your Mac.
    Is it possible that you for some reason changed the name on your iTunes account so that the purchased songs are not recognized as authorized?
    Is your iTunes updated to current version? But I would avoid updating to Quicktime 7.5 at this time, as some users have reported problems with jerky playback and out of sync music after the update.
    Finally, try posting your question on the iTunes forum and see if those folks have a solution.
    Good luck with this.

  • I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474

  • My computer will not recognize my Ipad as a music device, only as a camera

    My computer will not recognize my Ipad as a music device, only as a camera.  When I connect the cable from my Ipad to my computer, only options that appear are for camera and photos.  Thanks.

    That's Windows.

  • TRIED EVERYTHING!!! computer will not recognize IPOD and no charging

    Tried changing cords; tried reinstalling all software; tried to determine if conflicting software; ran ipod out of power and my computer still will not recognize when I plug it in. Backlight initially lights up but ipod does not show up in device manager, itunes does not recognize it and ipod will not charge---ipod will charge on Bose speaker platform though....ANY SUGGESTIONS??????

    If none of the above help, then it may be an issue that requires service so why not take advantage of the warranty?
    You can arrange online service here.
    Service request.
    Or if an Apple store is near you, take it there and have them check your iPod.
    You can make an appointment by using this link.
    Genius Bar Appointments.

  • HT4124 Macbook Pro 10.6.8 Imovie will not recognize Sony Handycam DCR-HC38 via Firewire 800-9pin cable. Is it not compatible? It worked with previous Macbook (black) with prev. firewire version.

    Have tried to connect Sony Handycam DCR-HC38 to Macbook Pro via Firewire 800-9pin to 4-pin cable. I Movie will not recognize camera. I have transferred media on old Macbook (black version) with different firewire. Does the new IMovie not support this product?
    Thanks

    Hi,
    Did you solved this problem?
    I have the same situation here...
    Regards

  • IMovie will not recognize my iTunes library-any suggestions?

    Trying to import music from iTunes library (set up as iTunes Match) into iMovie, but when I click music icon on the right to import and prompt iTunes/Sound effect options-nothing comes up. The sound effects are there, but my iTunes library is not. It says to 'Open iTunes to Populate this list' at the bottom right of the menu.
    I've updated iTunes as well as iMovie, hoping to resolve. But no luck.
    Any suggestions?
    Thanks

    As far as I can tell iMovie only sees music that you've downloaded to your computer. Identify it and then go to iTunes and redownload the song and it should be solved.

  • I used  Ion Profile Pro to digitize quite a few records. However on some records, it will not recognize them and sync them in iTunes. Perhaps because some songs "ran together" when copied or titles were misspelled. Can I get iTunes to recognize them?

    I used Ion Profile Pro turntable to digitize some old records. It worked fine for most of the records, but on five or six albums I get an error message saying "the original file can't be found" and it won't transfer them to my iPod Touch. However, the files are on my hard disk digitized and I can click on them and play them in Windows Media Player. When I go to iTunes, the records (or the CD created from the original records) exits in the iTunes libraries for sale. However, in some cases, the contents of the album offered for sale differs slightly from the original record, or the songs exist on different albums, but not the original album that I had. In some cases minor misspellings occurred on a few titles when they were entered in the ION softwareon my computer. In a few cases, it seemed as if ION did not recognize that there were two or three songs and ran them all together as one and again, my song list does not exactly match Apple's.
    I own these songs, but iTunes won't put them on my iPod Touch. Is there anything I can do (short of paying for songs I already own) to get Apple to recognize these songs?

    You seem to have an iTunes problem, not an iPod problem.  Try posting in the iTunes forum.

  • Garageband will not recognize itunes upgrade.

    Hi,
    I am not sure what happened in the few weeks of not using garageband, however, I opened it today and found that itunes will not load. I get this "open itunes 6 or later to populate this list". I am finding the same message in imovie as well. I could not find any info in the internet. any suggestions would be grateful as i have a) reinstalled iLife. b) repaired permissions. c)reinstalled itunes. d) trashed plists in the preferences. Thanks so much...

    http://www.bulletsandbones.com/GB/GBFAQ.html#PortableRecorderMp3s
    (please don't type in all caps)

  • I updated to iTunes 10.5 on Vista. As with iTunes 10.0, The DEP will not allow iTunes to open.  WHEN IS APPLE GOING TO ADDRESS THIS ISSUE?  I can't update my telephone or iPod.  I can't even open the iTunes program!!!

    I am sick of dealing with this issue.  I wish not that I had never even started using any Apple products, beginning with iTunes.  WHEN IS APPLE GOING TO ADDRESS THIS ISSUE AND MAKE ITUNES SOMEHOW COMPATIBLE WITH DEP IN WINDOWS VISTA?
    That being said, Is there any way to resolve this?  What I did in the past is completely wipe ALL Apple files from my computer, and install an older version of iTunes.  It was at least functional.  It seems that any version of iTunes 10.0 or more recent is not compatible with the Data Execution Prevention in Windows.  You can not remove iTunes from DEP, yet DEP prevents iTunes from running.
    The down side is that I can't get the latest updates for my iPhone or iPod.  Now, I have a new phone for my husband that needs syncing on my iTunes, and I can't do that because iTunes won't even open.
    Can somebody help me out with this, please? 

    OK, lets do a complete overhaul to make sure it's working ok.
    First to check your Windows system file for any corruption:
    Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
    type in
    sfc /scannow
    let Windows fix any system files that need to be repaired.
    Restart the computer.
    Start iTunes and see if it is ok.
    If it doesn't, will have to go through the whole process of uninstalling and installing acccording to the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    (Referenceinstructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components)
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • Data Execution Prevention will not allow iTunes to open.

    This started when I plugged in my iPhone to update it.  Data Execution Prevention closed the program then, and I can't open it again.  I have completely deleted all Apple programs from my computer.  I deleted all temporary files, defraged my hard drive, ran virus protection, restarted my computer and downloaded iTunes 10.0 AGAIN for at least the 10th time.  It always appears to install correctly, but when iTunes is supposed to open afterthe install tool closes, I get the "iTunes has stopped working. Winidows is checking for a solution" message.  Then Windows automaticly closes iTunes and I get the message that DEP has closed iTunes.
    Prior to trying to update my iPhone (which started all this) I was running iTunes 9.  I never had any problems with it.  (Is there somewhere I could go to download this version?)
    At the moment, I do not have Quicktime installed because I deleted it, and it was not installed the last time I installed iTunes.  iTunes still will not open.
    I enabled myself as administrator, and moved other users to "Standard" in the Vista User Account Control. 
    I am using Windows Vista Home Premium 32-bit.  Apple only gives the option of installing the 64-bit version of iTunes.
    Is this just a bug in the iTunes update, or what.  I would really appreciate any help I could get with this.  I have been reading suggestions and solution on these boards for the past 2 days, and nothing has worked so far.
    Thanks! 

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • Imovie will not recognize movie clips in the iphoto library within imovie

    I have video clips in IPHOTO that I trimmed (edited) but when I open IMOVIE and go to the IPHOTO library, it does not recognize the edited clip.  It still shows the full clip.  What do I do?

    Install this:
    http://www.theflip.com/en-us/App/fvsw/45/update/mac.aspx

  • IPhoto will not recognize itunes playlists

    I have had this problem for a couple months now where iphoto slideshows and idvd, and imovie cannot find any of the itunes music playlists and the pop-up for slideshows just says "open itunes 6 or higher to populate list" but never does.
    I recently upgraded to ilife 08 hoping that that would solve the issue but its still there. After reading some posts online i tried rebuilding my itunes library xml file many times, opened the apps in the correct order, repaired permissions deleted, threw away preference plist files, and even threw away and reinstalled several of the apps. None of them seemed to solve the issue. Anyone have any ideas to get the iapps to see itunes playlists again?? Please help

    No, this is a purely diagnostic step. It tells us that both iTunes and iPhoto are okay, there's no need to re-install them and that the issue is somewhere in your main user account.
    When the apps interact, iPhoto reads the iTunes xml file, and the problem is in there somewhere, so I would also be posting over there.
    All my comments about the iTunes xml file are based on what I've learned about the iPhoto one. They may not necessarily apply.
    Where is your iTunes Library? On your start up drive? On an external? If an external, what format is it?
    Do you have any non-ascii characters in your mp3 metadata or tags (essentially, anything not a-z or 0-9)
    Regards
    TD

  • My iPhone 4 has crashed.  i tunes will not recognize it and I can't restore it.  I sync with macbook pro and all software is up to date.  no anti-virus applications/software are on my macbook.  any ideas?

    my iphone 4g has crashed.  itunes doesn't seem to recognize it and wil not let me restore it.  i have updated all software and there are no anti-virus apps/software on the macbook that this phone syncs with.  i do get an error message on the phone that says something like the accessory is not compatible but I have no accessory for the phone other than the apple chargers and ear buds.  any thoughts? 

    The possible fix for the "this accessory is not compatible" is to carefully clean the dock port with isopropyll alcohol especially the pins which are on top of the mid rib. Be firm but do not break anything. Let it dry for a minute. See if that helps, if not try to clean one more time. If problems persist might need to Visit Apple.

  • IPhone 3Gs will NOT recognize iTunes NOR charge with my PC but ....

    My iPhone 3Gs (16GBytes white model) will NOT show up on iTunes NOR charge with my PC but it will charge with the wall plug.
    My iPhone 3Gs IMEI: 01 203100 586260 3
    It is an unlocked iPhone purchased directly from one of Apple store online in Asia.
    I am currently traveling in Asia and using a local SIM card.
    All of a sudden today, it will not charge on my laptop. It still charges on the wall plug. I suspect that it has to do with me plugging the phone into another public but older PC (running Windows XP) - was attempting to charge my phone but that public PC did not show that it was charging or recognizing the iPhone.
    It will not charge or sync no matter what I do. I tried using the power button + home button. I tried holding the home button then plugging in the USB cable. I tried erasing all the data on the phone. All of the above failed.
    Now I have the screen where it shows that I have to plug in the USB cable to activate my phone!
    Help! Help! Help! Help! Help! Help! Help! Help! Help! Help! Help! Help! Help!

    3194 usually means one of the following:
    You don't have the latest version of iTunes
    You are trying to downgrade the phone to a version lower than 5.0.1
    Your phone has been jailbroken or hacked to use with a carrier other than the carrier it is locked to

Maybe you are looking for

  • I updated itunes last week and since then it wont open

    After the last update iTunes wont open all i get is an error saying iTunes.exe - Entry Point Not Found  The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.  then after i click ok on

  • RFC - Presentation to application Server

    Hi,     when we call a transaction in SAP R/3  e.g. SE38. , a  RFC is called from presentation server to application server. i wnat to know what exactly happens behind the screen.how a rfc is called? how  the connection is established between present

  • Aren't iPods suffering from overprotection?

    I see new skins, cases, protecting films and other accessories to wrap and protect iPods being advertised almost daily. On the other side, there are thousands of posts of users in many different discussion forums who are extremely afraid of getting t

  • Flash 10.3 "failed to initialise"

    Hi All I've been creating an image for distribution on a number of kiosks, running Windows XP SP3 & when I do a fresh instal of Flash 10.3 (i.e. the version released today) I get a "Failed to Initialise" message. Further more the flash.exe installer

  • Profile customized attribute is not working?

    Hi, I downloaded ‘WCSpacesExtensions’ project from Oracle because I want to add some customize attributes to Profile. I added ‘project’ to ExtendedProfileAttributes.java, and created getter and setter methods. In a jsff, this is my EL #{wcProfileCust