Imovie - will record and worked fine yesterday but now.....
Ok I have problems with the fliker on my macbook. So I had to reload the hwole system. Now the display screen in imovie doesnt work, or the audio and i am working on a project that worked absolutley fine yesterday. I can record with the isight on my macbook, I cant watch or hear it, its just a white screen. Thats it, i can see my recorded files, butu they wont play back nothing. Its worrying!
Please help me.
Yep all the updates and restarted it. It has actually taken 3- 4 hours hours to get back on to macbook! VERY annoying. Its took that long to load!!!!! seriously!!! I had to put on the OS again! all the updates are on again except I cant use my tunes music now in imovie which stinks i have to re-authorise the account and its still doesnt work. In fact i have apprently got it authorised on 4 other computers!! How? its should only be 2!?!
imovie is kinda working now, but nothing else is typical. Its sod law lol
I think its no good. I had to start up the OS orginally because of a darn screen flicker which is still there. I think the logic board is gone. I was onto apple yesterday for an hour and they were very helpful, but its just no good. I am waiting for my new back up hard-drive backing up everything! Then send it off for repairs. I feel I am oing to lose eveything if I switch this off again. And to add to problems itunes is acting up... great!
<post edited by host>
Similar Messages
-
For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?
thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements. -
My AI program (CS5 Illustrator 15.1.0) will not open some PDFs. It was working just yesterday, but now will only open a PDF if the graphics of the PDF is visible in the box that appears in the lower left corner of the dialog box after you click Open. The file size does not seem to matter. Any ideas?
Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha -
I don't understand why my iTunes worked perfectly yesterday but today I can't get it to open at all. I did the autoruns.zip and that didn't help at all. I also redownloaded the iTunes but that didn't help either. Can you help me? Thank you, Lynne Heimann
Alas, I have tried that. I have also done this complicated uninstall and reinstall process. I have figured out in my battles with iTunes today that it will open when I am not connected to the Internet but as soon I turn on the wifi and go the iTunes store, iTunes crashes again.
-
My phone played music fine yesterday. Today, headphones plugged in or not, my music (including YouTube and ringer) stops working. The timer still counts up as though it is still working but the volume turns gray or not at all and the little circle volume control disappears. How can I get my music working again?
Hello ladypinecone,
Thank you for using Apple Support Communities.
The following article provides you with information to troubleshoot sound issues with your iPhone.
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Regards,
Jeff D. -
i buyed a new unlocked iphone 4s in united kingdom. i inserted a sim card and it was working fine. but now i m in Kuwait for some time i inserted a local sim card and my iphone ask me to activate it but when i go through the process of activation my iphone does not read my local sim card. please help me out. i will be very thankfull.
thanks for this... I bought iphone 4 unlocked in USA in Dec 2012--being told by the salesperson IN the Apple store that there were Apple Stores in Quito & Cuenca. I'm in Cuenca now--NO STORE, & now that I need to activate--have also been told "not every cellular store CAN activate iphone!" I am reading about all these problems--yours is the first response that has a solution! Now going to set up with Claro... wish me luck! Any other advice you have on use in Ecuador--I'll be grateful :-)
-
ATried to open Firefox browser to read mail but it wouldnt open. An error message indicated something about version 12 and version 11 issues so I uninstalled Firefox and used Explorer to download a fresh copy. Wouldnt install.
Keep getting a box that says " The extended attritbutes are inconsistent"Thank you for the reply. I forgot to mention that I did run scans for viruses and malware and came up clean.
I ran the System File Checker and it told me there are corrupt files that could not be repaired. I dont understand all the info that I read on the CBS.log, but from what I gather from the link you provided I'll be doing a reformat today. :(
What puzzles me is the fact that all was well when I shut down my computer but by morning there were corrupt files????? Strange no virus, no malware so what on earth happened? The million dollar question.:)
Sincerely appreciate your assistance. -
my i phone 5 wont turn on or charge?
First thing to try, press and hold both the home and lock buttons until you see the apple logo on the screen, about 10 seconds.
-
When I open Firefox, it appears as a blank, black window with nothing to click on. Everything was working normally last night. Problem only appeared this morning. I tried System Restore, but it failed to complete successfully.
I'm running Windows 7 on an MSI notebook. It's about three years old.Here's a screenshot of what I'm experiencing.
-
Some websites keep asking to enable cookies in my browser when they are and I can't get this sites to see that, they worked fine yesterday but not now. I've restarted the browser, restarted the computer, disabled then enabled cookies in the privacy settings and still nothing. Any help?
Hi,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
My apple TV will not display anything although it [the TV] meets all of the requirements. It worked for about four or five days and than stopped yesterday, but when i brought it to the apple store, it connected fine to their tv. Any help or suggestion?
mrdctaylor wrote:
Since I updated to the latest/greatest version of the software I can no longer put my Apple TV to sleep by holding down the middle button.
Thanks!
Apple have changed this setting with the Apple TV Software Update 5.1:
About Apple TV (2nd and 3rd generation) software updates
Feature
Summary
Shared Photo Streams
Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
AirPlay
Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
iTunes account switching
Save multiple iTunes accounts and switch quickly between them.
Trailers
Search movie trailers. In the United States, see show times for local theaters.
Screen savers
New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
Main menu
Reorder icons on the second page by holding down the select button on the remote.
Subtitles
SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
Network configuration
Support for setting up advanced network options using configuration profiles. Seehttp://support.apple.com/kb/HT5437 for more information.
Stability and performance
Includes general performance and stability improvements.
If you don't like this, you can leave feedback here: Apple Feedback -
My Apple TV just has a white blinking light. Will not turn off. The TV shows nothing but the Apple logo. It worked fine yesterday. PS - I am not an IT person.
pull the plug for 30sec and try reconnecting power
if that don't help
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support -
Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhatejaHi,
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support -
I had 3 versions of FF and had to redo the HD and now no version will install says "Can't open output file" i have winddows 7 64 bit 8 GB memory and 1T HD but i have it on my other desktop and laptop with less memory and HD space and works fine laptop has windows 7 64 bit and other desktop hook to my 32" tv has win 7 32-bit i lso did clean removal of all versions of FF and did new DLs with screen shots of it DLing, complete of DL and after i got the error again.
i am posting this as a reply due to it would not allow me to attach screen shots except for this way
-
I just changed my user name to my e-mail address on my iMac. It works fine there but when I try to use my iPhone it still shows my old user name and will not let me enter??
There is no user name needed to "enter" or use iPhones...
Assuming you mean your iTunes Store account ID:
Settings > Store > tap ID > sign out > sign in with new ID
Maybe you are looking for
-
How to run a SQL based query against a specific collection
Hello, I have used this query to make a custom reports, it works but all machines are mixed up, So I am looking for a way to run it against collection group win 8 or win 8.1. or if I can add a line to this query so it will also display OS version. SE
-
Can you use an XML file to make Subclips for you?
Hi everyone, I know this is a bit of a long-shot, but I am wondering if I can use an XML file(made after logging a few tapes, but before capture) to make subclips for me? Basically I have a painful project with 2 tapes i had to capture separately as
-
Material Ledger Functionality with Non Valuated Sales Order Stock
We are in the process of setting up Make To Order (MTO) with Non Valuated Sales Order Stock. We currently use the Material Ledger in our other businesses that use Process Orders. Does the Material Ledger functionality support MTO with Non Valuated Sa
-
How to select Max in a multi query?
Hi all, I got this query: select DEPTNO, EMPNO from EMP1 minus select DEPTNO, EMPNO from EMP2; I want to get single row from the results of this query, so I may use MAX or MIN or where rownum<2. How can I do this please.... I tried: SELECT MAX(select
-
Sale Order Upload: no batch input data for SAPMV45A 4003
Hi Gurus, the error "no batch input data for SAPMV45A 4003 " is occuring in every sale order upload created by lsmw or thorugh abap.. The issue is occuring randomly which means the same upload file produces the error in the different positions at