IMovie, working on other hard disk drive

Is there any way to work on iMovie 09 on external hard disk?
I am now trying to work on my new movie project, and my most of movies I want to use are in my other hard disk. Those movies are too huge to move in my computer.
Or is there anyway to set the iMovie events folder in other hard disk drive?
Thanks.

Welcome to Discussions, daylight7986
Click the Hard Disk button in iMovie's Event Library to see other drives.
iMovie help can give you more info. Searching your Mac's iMovie > Help for "disk" (without the quotation marks) will give you several topics including these linked here from Apple's web help:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/19548.html
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/19555.html
(The help topics will be quicker to use from your Mac's iMovie help.)
They will explain how to change disks or move a project there after it has been created.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight
Message was edited by: EZ Jim

Similar Messages

External hard disk drive problem with windows laptops?

my other hard disk drive cannot be read or write on windows and on my macbook pro 13.

If the HDD cannot be read on either machine, it may have failed. Connect it to your MBP and open Disk Utility. Is it recognized there?
Ciao.

Does Hard Disk Drive Camcorder using MPEG2-PS format work with iMovie6?

Considering purchasing a Sony DSR - SR 82 Camcorder with a Hard Disk Drive using MPEG2-PS format. I read in the Missing Manual that MPEG-2 generally does not work with iMovie.

Hello Luv2Curl,
I read in the Missing Manual that MPEG-2 generally does not work with iMovie.
That is correct. MPEG-2 video needs to go through a lengthy and lossy conversion process in order to be imported and edited in iMovie. You'll be better off getting a MiniDV camcorder - it works natively with iMovie and the video quality is better as well.
hope this helps
mish

I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my 10.6.8 back

I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so

Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.

Will the1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1?

Will the 1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1? My details of my Mac Pro is as follows:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          6 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Hardware UUID:          00000000-0000-1000-8000-0017F2059956

It will say "green" and use less power, park its head probably, and while early units had some trouble they have evolved. Variable rpm or slower rpm also. They can be much less expenisve way to add storage.
WD Caviar Green
WD Green 2TB
For the system, 640GB is a nice size. Look for 64MB cache to help insure your drive is the latest models which will also say "6G SATA 3" which is fine.
WD Caviar Black 1TB 6Gb
WD Black Caviar 2TB
larger means higher density platter, I find the 1TB and larger Blacks to run hotter/warmer and companys want drives to be able to run warmer or with less cooling. - but for really cold drives other than SSD I have found all my WD 10K VRs to have the absolute coldest temps.
Just noticed Amazon having better prices than Newegg on 1TB - and WD and Hitachi.
Green for your external backup, for media libraries that are not high volume access, to run cool and less power. Enterprise for system and performance. TimeMachine sometimes makes a poor backup method with some green cases.

HT4889 Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive, it is constantly saying that it is "looking for other computers". It doesn't find the external drive. Why is it looking for other computers?

I'm trying to use Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive. I told it to look for a drive, yet it is constantly saying that it is "looking for other computers". It doesn't find the external drive ... it just endlessly looks for other computers. Why is it looking for other computers at all, when I told it not to?

Wow, the wording in Migration Assistant is misleading. I've never used it before, so I thought I would try to copy my files from the external drive ... my old iMac died, but I managed to get everything I need off it, using the 'cp' command in single-user mode. So I guess I'll just have to manually copy the files from the external drive to the new machine. I was hoping that Migration Assistant might help somehow, but obviously not.
Thanks for the quick reply!

Comparison of SSD with hard disk drives

Attribute or characteristic
Solid-state drive
Hard disk drive
Spin-up time
Instantaneous.
May take several seconds. With a large number of drives, spin-up may need to be staggered to limit total power drawn.
Random access time[45]
About 0.1 ms - many times faster than HDDs because data is accessed directly from the flash memory
Ranges from 5–10 ms due to the need to move the heads and wait for the data to rotate under the read/write head
Read latency time[46]
Generally low because the data can be read directly from any location; In applications where hard disk seeks are the limiting factor, this results in faster boot and application launch times (see Amdahl's law).[47]
Generally high since the mechanical components require additional time to get aligned
Consistent read performance[48]
Read performance does not change based on where data is stored on an SSD
If data is written in a fragmented way, reading back the data will have varying response times
Defragmentation
SSDs do not benefit from defragmentation because there is little benefit to reading data sequentially and any defragmentation process adds additional writes on the NAND flash that already have a limited cycle life.[49][50]
HDDs may require defragmentation after continued operations or erasing and writing data, especially involving large files or where the disk space becomes low. [51]
Acoustic levels
SSDs have no moving parts and make no sound
HDDs have moving parts (heads, spindle motor) and have varying levels of sound depending upon model
Mechanical reliability
A lack of moving parts virtually eliminates mechanical breakdowns
HDDs have many moving parts that are all subject to failure over time
Susceptibility toenvironmental factors[47][52][53]
No flying heads or rotating platters to fail as a result of shock, altitude, or vibration
The flying heads and rotating platters are generally susceptible to shock, altitude, and vibration
Magneticsusceptibility[citation needed]
No impact on flash memory
Magnets or magnetic surges can alter data on the media
Weight and size[52]
The weight of flash memory and the circuit board material are very light compared to HDDs
Higher performing HDDs require heavier components than laptop HDDs that are light, but not as light as SSDs
Parallel operation[citation needed]
Some flash controllers can have multiple flash chips reading and writing different data simultaneously
HDDs have multiple heads (one per platter) but they are connected, and share one positioning motor.
Write longevity
Solid state drives that use flash memory have a limited number of writes over the life of the drive.[54][55][56][57] SSDs based on DRAM do not have a limited number of writes.
Magnetic media do not have a limited number of writes.
Software encryption limitations
NAND flash memory cannot be overwritten, but has to be rewritten to previously erased blocks. If a software encryption program encrypts data already on the SSD, the overwritten data is still unsecured, unencrypted, and accessible (drive-based hardware encryption does not have this problem). Also data cannot be securely erased by overwriting the original file without special "Secure Erase" procedures built into the drive.[58]
HDDs can overwrite data directly on the drive in any particular sector.
Cost
As of October 2010, NAND flash SSDs cost about (US)$1.40–2.00 per GB
As of October 2010, HDDs cost about (US)$0.10/GB for 3.5 in and $0.20/GB for 2.5 in drives
Storage capacity
As of October 2010, SSDs come in different sizes up to 2TB but are typically 512GB or less[59]
As of October 2010, HDDs are typically 2-3TB or less
Read/write performance symmetry
Less expensive SSDs typically have write speeds significantly lower than their read speeds. Higher performing SSDs and those from particular manufacturers have a balanced read and write speed.[citation needed]
HDDs generally have symmetrical read and write speeds
Free block availability andTRIM
SSD write performance is significantly impacted by the availability of free, programmable blocks. Previously written data blocks that are no longer in use can be reclaimed by TRIM; however, even with TRIM, fewer free, programmable blocks translates into reduced performance.[25][60][61]
HDDs are not affected by free blocks or the operation (or lack) of the TRIM command
Power consumption
High performance flash-based SSDs generally require 1/2 to 1/3 the power of HDDs; High performance DRAM SSDs generally require as much power as HDDs and consume power when the rest of the system is shut down.[62][63]
High performance HDDs generally require between 12-18 watts; drives designed for notebook computers are typically 2 watts.

I wish I could get my head round the SSD vs HDD with a NLE rig. My builder is trying to persuade me to use a Toshiba 256Gb THNSNC256GBSJ for OS and programs, and it is only NZ$20 more expensive than the 450Gb 10k rpm VelociRaptor I was originally planing to use for the OS. That sounds suspiciously cheap to me, and I am concerned about the finite writes to SSD - mainly because I don't really understand it.
The rest of the new build is
3930K
Gigabyte X79-UD5
8 x DDR3 1600
Coolermaster with 750W PSU
Geforce GTX570
I plan to transfer the drives from my current system as a starting point, and reassess after giving it some use. That means
Either the above SSD or 450Gb 10k Raptor for OS (new drives)
300Gb 10k rpm Raptor (currently used for OS in old box)
150Gb 7k4 rpm Raptor (reserved for Photoshop Scratch in old box)
2 x 1Tb WD Blacks (data drives)
2 x 1Tb WD USB3 externals
I don't know how I would configure the drives in the new box, but have seen Harm's table and will try to follow his advice. It's a dreadful thing to admit, but I don't have a backup strategy, and the above drives are well over half full. Well over! And I am only just getting serious about video, (the rest is mainly CR2 files from my Canon 1Ds3 and 1D4)
I know it must be like banging your head against the wall, but should I avoid that SSD and go with the 450G Raptor? I have read a comment that the WD Blacks don't work well as Raid0. Is that BS or true?
I am about to give the go-ahead so need to confirm the spec.

Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Is it possible to upgrade the internal Hard disk drive on the iMac

Is it possible to upgrade the internal Hard disk drive on the iMac?

Yes but it's definitely not advised. If you have a machine newer than 2009 Apple uses drives that have integrated heat sensors. This makes upgrading much more difficult but not impossible. If you have a machine still under warranty then definitely DO NOT do this yourself as you may void the warranty not to mention it isn't for the faint of heart. Take the machine to an AASP to have the work done, you will need to find one in your area willing to do so.
If you are considering a new machine then simply buy the configuation you need.

Replacing SSD with hard disk drive on Qosmio X505-Q880

Is it possible to replace the SSD drive in a Qosmio X505-Q880 with a hard disk drive? If so what type will work?
Thanks,
Ed

Yes. I just replaced my 60 gig with a Kingston 240gig from Amazon. Re installed Windows 7 Ultimate. I DID NOT use the recovery disk from Toshiba because there were many programs that did not suit my needs, excellent though they were. It runs very fast about 4 times as fast as my old drive.

Mac OSX wont reognise my internal hard disk drive

I have a problem where for some reason when I start up my Macbook Pro (intel core duo) it does not detect the internal hard disk drive at all. I have run a hardware test and it shows no problems whatsoever. I have tried resetting the PRAM etc and to no avail. Yesterday the system hung and I tried to force quit and it wouldn't do anything so eventually I held down the power key and when it tried to reboot this is the problem I was faced with (it would boot up with the "no entry" sign). I accepted complete defeat and went to completely re-install OSX however it doesn't even show the internal hard drive when I wait for it to give me install destinations. I had tried seeing the hard drive through disk utility however it only shows the install DVD and that's it in the sidebar. I resigned myself further to thinking either the logic board or the HDD had packed in all and I took it round to my brother in law to see if there is anything he could do without opening the machine (he is Oxford educated and writes programmes etc so is very knowledgable), now this is the part that has miffed us both, he started it up using a Linux disc and once running, Linux see's the hard drive with no problems. He has been able to access the HDD with absolutely no problems under Linux both reading and writing to it. I even took my Mac Mini round and he booted them both up in Linux and completely copied Mac OSX from the mini to the macbook pro but still when I try booting up its as if the HDD isn't even there. Why can Linux see the drive and not Mac OSX? Please don't be affraid to get very technical in your answers as they may mean nothing to me but will probably all make sense to my brother in Law. Any sugestions at all would be greatly accepted.

Dear mcdkev,
You guys may have made a big error cloning the Mini HD into the MBP. They both have very different drivers and hardware settings and their OS X versions are customized to fit the hardware. That is why each mac comes with it's own version of OS X and their backup disks. That's a reason why it did not work.
Ok, so now that you do not have any of the original info on the MBP try the following:
Use linux to scan the disk surface & repair any problems.
Reformat the drive as DOS or FAT 32. (I wouldn't go into any linux specific format unless you can "Apple" format it, which I don't think linux has that option.)
Now, the MBP should be able to see it's drive...
boot from the OS X DVD , from the Utilities menu choose Disk Utilities, partition the drive as GUI file system (in case the linux format made the drive a "system boot record", you do not want that... )
Then format the drive as "OS X Extended Journaled"
Now go back to install and install your original basic set of OS X (the factory default).
*If nothing works, please do take your MBP to the Apple store or to a certified tech before you do more damage to the drive and it becomes unusable ...*

Arch: Install to & run from External USB Hard Disk Drive (HDD)

I wanted to play with ArchLinux 2009.02, but replacing the existing Debian-Lenny on the laptop's HDD wasn't an option. So I experimented with installing Arch on an external USB Hard Disk Drive.
I have tried to make this "newbie-friendly", so I hope the more experienced will forgive the detail.
Materials:
Three year old Dell Inspiron 6000
CPU = 2.0 GHz Pentium
RAM = 2.0 GB
Internal HDD = 80 GB
Internal CD/DVD R/RW
External USB HDD = Freecom FHD-2 Pro 80 GB
Archlinux 2009.02 install CD
Steps to install:
1. I put the Archlinux install CD in the drive and connected the external 80 GB HDD in the USB port.
2. When the Dell laptop was booted, I pressed F2 to enter the BIOS setup. I edited the boot sequence to the following:
Internal CD/DVD
External USB device
Internal HDD
On the Dell, you can also press F12 to select the preferred boot device for that boot.
3. I started the laptop and the Archlinux installation menu came up and I proceeded with installation following the "Official Arch Linux Install Guide" and the "Beginners Guide".
4. Used km to change to UK keyboard layout and then began the installer script (/arch/setup). I was installing from the core CD so I skipped the network steps.
5. HDD preparation.
This was fairly straightforward with two cautions:
(a) Make very sure that the external HDD (sdb) is selected for the operations.
(b) Remember to set the Bootable Flag for the first (/) partition on the HDD.
I chose 20 GB for /, 2 GB for swap and the remainder for /home.
6. The package selection and installation was fairly straightforward.
7. Configuration of System
This was section was straightforward with one warning:
USB had to be added to the HOOKS in the /etc/mkinitcpio.conf file!
I found this to be essential for my external USB HDD to function as a bootable device. Otherwise I got the same sorts of errors relating to unrecognisable file system types that other people have reported in the forum.
The relevant line from the end of the edited /etc/mkinitcpio.conf file is below:
HOOKS="base udev autodetect pata scsi sata usb filesystems"
8. Installation of GRUB was the other point where caution and/or correction was necessary.
When it asked where GRUB should be installed, I had to select sdb (my external USB HDD) and not any of the particular partitions on sdb. If the root partition sdb1 was selected then the laptop won't boot from the external USB HDD.
The GRUB /boot/grub/menu.lst as written by the installation routine specifies hd(1,0) which doesn't work when you try to reboot from the external USB HDD. When you boot Arch from the external USB HDD, as far as Arch is concerned - at that point in time - the external USB HDD is the first drive in the system. To fix this:
(a) When the Arch boot menu comes up, press e to edit the grub entries.
(b) Change the first line to hd(0,0)
(c) To the end of the kernel line add rootdelay=8
(d) Press b to boot the system with these temporary corrections.
(e) Once your Arch system has booted, edit the /boot/grub/menu.lst to make the above changes permanent.
The relevant portion of my /boot/grub/menu.lst looks like the following:
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
initrd /boot/kernel26-fallback.img
9. The laptop happily and consistently boots Arch Linux from the external USB HDD when it's plugged in before startup/booting.
Running Arch from the external USB HDD seems as quick as running Debian from the internal HDD.
So if there is a performance penalty associated with using an external USB HDD, my wife and I haven't noticed.
In summary, the three essential points to address during installation to an external USB HDD are:
Remember to set the bootable flag for the first partition.
Add USB to the HOOKS for /etc/mkinitcpio.conf file.
Correct the /etc/grub/menu.lst file.
I hope this is helpful.
Ted

Hi Rookie,
As you say, it is worth remembering the rootfstype= option for the kernel line just in case someone still has problems with GRUB after making all the other changes.
I was working with the most recent Arch 2009.2 release.
I only got messages about unrecognisable file system type when I tried booting with the "stock" or "as-installed" GRUB (before I edited /boot/grub/menu.lst). After editing /boot/grub/menu.lst to identify the drive correctly and add rootdelay, GRUB was able to do the rest and everything worked OK without any error messages.
Best wishes,
Ted

How to make the RESCUE AND RECOVERY hidden partition when changing the hard disk drive

I've got T61 and I'd like to know if is it possible (in case of changing the HDD) to make the RESCUE AND RECOVERY hidden partition on the new hard disk drive? If yes - please let me know how to do that.

hi you the rescue partition is made automatically when you use your recovery cd's on the new HDD so no problem there!
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Hard disk drive for A20P

Just to know which maxi hard disk drive size is able to run my A20P
ThinkPad A20p - PIII 700 MHz (256KB) 512MB RAM Size of original HDD:18.0GB
Thanks for help

Your A20p will take on a significantly larger hard drive, I've had a 60Gb in one of my past ones and it worked fine. Theoretically, you should be able to install the largest available PATA drive (currently 250Gb), but I remember reading somewhere that there might be a BIOS limit at 137Gb.
Anyway, an 80, 100 or 120Gb HDD should work just fine even with the aforementioned (unverified by myself) limit.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

My hard disk drive failed. How do I deactivate that copy?

My hard disk drive failed. The genius at The Apple Store checked it out and said it was dead. Apple sold me another drive with just the operating system on it. Now when I installed Photoshop CS6, I am told that this is my second copy. How do I deactivate the copy on the failed disk drive. I was able to copy most of my data files from the drive. I do not know if the copy of Photoshop on that drive still works or not. What should I do?

Call Adobe support to reset activations. Have your papers handy...
Mylenium

IMovie, working on other hard disk drive

Similar Messages

Maybe you are looking for