IMovie08 - iDVD 08 Field Problem in Dropzone

Hi,
I just did a little project in iMovie, importing from my DV-Cam, editing and exporting as QT PAL interlaced.
I then wanted to put these files on a DVD using iDVD - quite basic I thought. I used one of the old Menu themes, the one with a film projector projecting a preview of the clip on a wall with some old movie effects automatically applied.
The preview looked fine, but after encoding and burning (Professional Quality) the movie running in the title menu looked, as if iDVD did scale it down without considering the interlacing, so that on my CRT the menu-clip shows groups of flickering lines.
The rest of the DVD looks fine, though. Is it possible that iDVD doesnt correctly process interlaced material when scaling it and applying dropzone-effects? (I saw an effect like this before, since I'm working with video a lot, and I think this effect would not occur when iDVD did interpret the field mode of the clip properly before scaling)
My solution for this would be exporting a separate progressive clip from imovie for the menu. But I thought iDVD should recognize the field-mode of the imported clip...
Maybe someone can clear this up a little.
Thanks in advance,
Regards,
Gerd

suggestion: may want to remove motion from the projector clip. otherwise it will emulate an old fashion projector movie (white lines, dust scratches, and yes jitters as well).
Message was edited by: SDMacuser

Similar Messages

DATE FIELD PROBLEMS - URGENT

I´m having trouble with FormsCentral.
My form is running about 8 months with no problems.
Yesterday people started to complain that the system doesn´t accept any date.
That means the date field restricts date entries, from date dd/mm/aaaa (brazilian format) to another dd/mm/aaaa, but every date that users input in, is considered by the system as invalid, even it´s a correct and valid date right between the interval specified!
I need Help Urgent!!!
I depend on these forms to finish the payrol service from here.
Thanks
I´ll be waiting.
Maurício Galletti
Message was edited by: SNOWMAUSS
It look like the system accepts just dates starting from the date of today.
I´m testing.
Please help.
Thanks
Message was edited by: SNOWMAUSS
It looks like the system have some problem just with the date 20/10/2013?!
I´ve fixed the problem change the interval from 20/10/2013 to another date and used 21/10/2013 to another date and it works!
But I think something is wrong with the 20/10/2013 date?!
To reproduce the erros just create a new form with date feature with this exaclty configurations and the bug appears:
I´ll keep waiting
Message was edited by: SNOWMAUSS

Hi
I´ve concluded that the problem persist if the date interval starts at the
specific date "20/10/2013". Don´t know why?!
Look at the screen capture above, you aks for
Thanks a lot
image: Imagem inline 1
Maurício P. Galletti
Contador
[email protected]
( 55 11 3331-5567
www.cadt.com.br
2013/10/29 Genevieve Laroche <[email protected]>
Re: DATE FIELD PROBLEMS - URGENT created by Genevieve Laroche<http://forums.adobe.com/people/Genevieve+Laroche>in
FormsCentral - View the full discussion<http://forums.adobe.com/message/5797083#5797083

Table Control Text fields problem , help plz

Hello Anand , Rich , John & All
I hav problem with Text 3 fields( type c)(either L or R aligned ) , it is not geting updated , otherwise everything else is perfectly fine(scrolling,sorting etc ....) .
Fields giving problem are
1. Status(20) type c
2. Fdat type date
3. Remark(100) type c
All numerical fields are working fine .
 My yahoo messenger-id is [email protected]
Any light on this will be awarded plz .
FLOW LOGIC
PROCESS BEFORE OUTPUT.
MODULE SET_STATUS.
LOOP AT ITAB
 WITH CONTROL TCL1
 CURSOR TCL1-CURRENT_LINE .
 MODULE SET_LINE_COUNT .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE UPD_OK_COD.
MODULE EXIT_COMAND AT EXIT-COMMAND.
MODULE SCROLL_SORT.
LOOP AT ITAB.
 MODULE UPDATE_ITAB.
ENDLOOP.
MODULE UPDATE_TABLE.
REPORT ZSD_REP_ORDER_BANK_CHANGE NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: VBAK,VBAP,VBRK,ZSD_TABL_ORDBANK,MARA,KONV.
CONTROLS: TCL1 TYPE TABLEVIEW USING SCREEN 0200.
DATA: ITAB LIKE ZSD_TABL_ORDBANK OCCURS 0 WITH HEADER LINE,
 WA_ITAB LIKE ZSD_TABL_ORDBANK,
 OK_CODE LIKE SY-UCOMM,
 SAVE_OK_CODE LIKE SY-UCOMM,
 UPD_OK_CODE LIKE SY-UCOMM,
 ANSWER TYPE C,
 I LIKE SY-LOOPC ,
 J LIKE SY-LOOPC,
 V_LINES LIKE SY-LOOPC,
 LINE_COUNT LIKE SY-LOOPC,
 STS TYPE N,
 EMGRP LIKE MARA-EXTWG,
 QTY LIKE ZSD_TABL_ORDBANK-QTY,
 UPRICE LIKE ZSD_TABL_ORDBANK-UPRICE,
 TOT LIKE ZSD_TABL_ORDBANK-TOT,
 INO LIKE VBAP-POSNR,
 COL TYPE CXTAB_COLUMN,
 COPIED_ONCE ,
 FLDNAME(100),HELP(100).
FIELD-SYMBOLS:
 <FS_ITAB> LIKE LINE OF ITAB,
 <FS_TCL1> LIKE LINE OF TCL1-COLS.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: S_CCODE FOR ZSD_TABL_ORDBANK-CCODE
 NO INTERVALS NO-EXTENSION OBLIGATORY,
 S_SORG FOR ZSD_TABL_ORDBANK-SORG
 NO INTERVALS NO-EXTENSION OBLIGATORY,
 S_DCHAN FOR ZSD_TABL_ORDBANK-DISTCHAN,
 S_DIV FOR ZSD_TABL_ORDBANK-DIV,
 S_MATNO FOR ZSD_TABL_ORDBANK-MATNO,
 S_CUSTNO FOR ZSD_TABL_ORDBANK-CUSTNO ,
 S_QTNO FOR ZSD_TABL_ORDBANK-QTNO,
 S_QTDAT FOR ZSD_TABL_ORDBANK-QTDAT,
 S_QTVDAT FOR ZSD_TABL_ORDBANK-QTVALDAT,
 S_SONO FOR ZSD_TABL_ORDBANK-SONO.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
 SELECT * FROM ZSD_TABL_ORDBANK
 INTO TABLE ITAB
 WHERE CCODE IN S_CCODE
 AND SORG IN S_SORG
 AND DISTCHAN IN S_DCHAN
 AND DIV IN S_DIV
 AND MATNO IN S_MATNO
 AND CUSTNO IN S_CUSTNO
 AND QTNO IN S_QTNO
 AND QTDAT IN S_QTDAT
 AND QTVALDAT IN S_QTVDAT
 AND SONO IN S_SONO .
 IF SY-SUBRC EQ 0.
 REFRESH ITAB.
 CLEAR COPIED_ONCE.
 CALL SCREEN 0200.
 ELSE.
 MESSAGE E012(ZQOTBANK) .
 ENDIF.
*& Module SET_STATUS OUTPUT
* text
MODULE SET_STATUS OUTPUT.
SET PF-STATUS '0200'.
SET TITLEBAR '0200'.
 IF COPIED_ONCE IS INITIAL.
 SELECT * FROM ZSD_TABL_ORDBANK
 INTO TABLE ITAB
 WHERE CCODE IN S_CCODE
 AND SORG IN S_SORG
 AND DISTCHAN IN S_DCHAN
 AND DIV IN S_DIV
 AND MATNO IN S_MATNO
 AND CUSTNO IN S_CUSTNO
 AND QTNO IN S_QTNO
 AND QTDAT IN S_QTDAT
 AND QTVALDAT IN S_QTVDAT
 AND SONO IN S_SONO .
 IF SY-SUBRC EQ 0.
 DESCRIBE TABLE ITAB LINES V_LINES.
 TCL1-LINES = V_LINES.
 ENDIF.
 COPIED_ONCE = 'X'.
 REFRESH CONTROL 'TCL1' FROM SCREEN '0200'.
 ENDIF.
 LOOP AT ITAB.
 QTY = ITAB-QTY.
 UPRICE = ITAB-UPRICE.
 TOT = QTY * UPRICE .
 ITAB-TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-CGL_QTY.
 UPRICE = ITAB-CGL_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-CGL_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-BHEL_QTY.
 UPRICE = ITAB-BHEL_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-BHEL_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-ALSTOM_QTY.
 UPRICE = ITAB-ALSTOM_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-ALSTOM_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-SIEMENS_QTY.
 UPRICE = ITAB-SIEMENS_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-SIEMENS_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-TELK_QTY.
 UPRICE = ITAB-TELK_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-TELK_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 QTY = ITAB-OTH_QTY.
 UPRICE = ITAB-OTH_UPRICE.
 TOT = QTY * UPRICE .
 ITAB-OTH_TOT = TOT .
 CLEAR: QTY, UPRICE, TOT.
 MODIFY ITAB.
 ENDLOOP.
ENDMODULE. " SET_STATUS OUTPUT
*& Module SET_LINE_COUNT INPUT
* text
MODULE SET_LINE_COUNT OUTPUT.
LINE_COUNT = SY-LOOPC.
ENDMODULE. " SET_LINE_COUNT INPUT
*& Module UPD_OK_CODE INPUT
* text
MODULE UPD_OK_COD INPUT.
IF OK_CODE = 'SAVE'.
 UPD_OK_CODE = OK_CODE.
* CLEAR OK_CODE.
ENDIF.
ENDMODULE. " UPD_OK_CODE INPUT
*& Module EXIT_COMAND INPUT
* text
MODULE EXIT_COMAND INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
 WHEN 'BACK'.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
 TITLEBAR = 'Order Bank Entry'
 TEXT_QUESTION = 'Do you want to Go BacK ?'
 TEXT_BUTTON_1 = 'Yes'
 TEXT_BUTTON_2 = 'No'
 DEFAULT_BUTTON = '2'
 IMPORTING
 ANSWER = ANSWER.
 IF ANSWER = '1'.
 LEAVE TO SCREEN 0.
 ELSE.
 ENDIF.
 WHEN '%EX'.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
 TITLEBAR = 'Order Bank Entry'
 TEXT_QUESTION = 'Do you want to Exit ?'
 TEXT_BUTTON_1 = 'Yes'
 TEXT_BUTTON_2 = 'No'
 DEFAULT_BUTTON = '2'
 IMPORTING
 ANSWER = ANSWER.
 IF ANSWER = '1'.
 LEAVE TO SCREEN 0.
 ELSE.
 ENDIF.
ENDCASE.
ENDMODULE. " EXIT_COMAND INPUT
*& Module UPDATE_MOD INPUT
* text
MODULE UPDATE_ITAB INPUT.
 MODIFY TABLE ITAB FROM ITAB.
ENDMODULE. " UPDATE_MOD INPUT
*& Module SCROLL INPUT
* text
MODULE SCROLL_SORT INPUT.
SAVE_OK_CODE = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK_CODE.
WHEN 'P--'.
 TCL1-TOP_LINE = 1.
WHEN 'P-'.
 TCL1-TOP_LINE = TCL1-TOP_LINE - LINE_COUNT.
 IF TCL1-TOP_LINE LE 0.
 TCL1-TOP_LINE = 1.
 ENDIF.
WHEN 'P+'.
 I = TCL1-TOP_LINE + LINE_COUNT.
 J = TCL1-LINES - LINE_COUNT + 1.
 IF J LE 0.
 J = 1.
 ENDIF.
 IF I LE J.
 TCL1-TOP_LINE = I.
 ELSE.
 TCL1-TOP_LINE = J.
 ENDIF.
WHEN 'P++'.
 TCL1-TOP_LINE = TCL1-LINES - LINE_COUNT + 1.
 IF TCL1-TOP_LINE LE 0.
 TCL1-TOP_LINE = 1.
 ENDIF.
WHEN 'SORTUP'.
 READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
 IF SY-SUBRC = 0.
 SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
 SORT ITAB ASCENDING BY (FLDNAME).
 ENDIF.
WHEN 'SORTDN'.
 READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY SELECTED = 'X'.
 IF SY-SUBRC = 0.
 SPLIT <FS_TCL1>-SCREEN-NAME AT '-' INTO HELP FLDNAME.
 SORT ITAB DESCENDING BY (FLDNAME).
 ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND INPUT
*& Module TABL_UPD INPUT
* text
MODULE UPDATE_TABLE INPUT.
 CASE UPD_OK_CODE.
 WHEN 'SAVE'.
 UPDATE ZSD_TABL_ORDBANK FROM TABLE ITAB .
 IF SY-SUBRC EQ 0.
 MESSAGE I002(ZQOTBANK) .
 CLEAR UPD_OK_CODE.
 ELSE.
 MESSAGE E003(ZQOTBANK) .
 ENDIF.
 ENDCASE.
ENDMODULE. " TABL_UPD INPUT
Thnx
moni
Message was edited by: md monirujjaman
Message was edited by: md monirujjaman

Hi Moni,
The problem as I had replied in your earlier post is with the MODIFY statement.
MODIFY TABLE ITAB FROM ITAB. This statement will do the modifications based on the table key. When you have character fields as editable, then some problems are to be anticipated. In such a scenario, you must update the internal table based on the index, rather than based on key.
So consider using
MODIFY ITAB FROM ITAB INDEX TCL-CURRENT_LINE.
Where TCL is the name of the Table Control. Also observe the difference in syntax here, don't use the TABLE keyword for the MODIFY statement.
Please try it out and let me know.
Regards,
Anand Mandalika.

Selection screen field problem

Hello experts..
i have a selection screen , in that i have a field   s_bwart for mseg-bwart.
some times the user will input the data in the field and sometimes he wont. we have fixed movement types combination like
11-21 , 13-24 , 13-56 , 101-543 , 101-544 etc.
if the user did not input any thing in the selection screen , i am populating s_bwart in at-selection screen event with all the mvt types. after executing the report when user presses the back button to come to the selection screen, there the s_bwart field is containing all the mvt types in single values ie in the select options screen. So the user dont want that, if he comes back nothing should be there in the selection screen field s_bwart if he has not inputted anything. if he inputs only 11 mvt type then when he comes back after executing the report he should see only 11 in the select screen field ie s_bwart. Please send the replies on how to solve the problem.

hi,
in ur program try to display values for users in START-OF-SELECTION event as it triggers after the selection screen displayed for users. if user doesn't give any input then display default values in this event. and also create a variable
for ex:
data: ws_flag type c,
         p_value type i.
after u display default values for users in selection screen assign the flag as ' X '
ws_flag = 'X'.
before leaving ur program based on flag try to do like this.
if ws_flag = ' X '.
    clear s_data. // s_data is the select options for u.
else.
     s_data = p_value. // the value which user gave in selection screen as i/p.
endif.
if helpful reward some points.
with regards,
Suresh Aluri.

IDVD 6 Burn Problem , still

Still having trouble.
I have been trying to burn a 2 hour 20 minute DVD for three weeks.
I have tried in iDVD 5 , where the progress bar would get to an 1/8 of an inch from the end and it would stop responding, with no success and now trying iDVD 6 to see if it is any better.
I have tried some things thing I found in the the discussion that made sense but still no sucess.
I have to mention here that I can burn this iMovie no problem with Toast 7 but it does not have all the cool things that iDVD has so I would like to get this going.
I notice in iDVD 6 I would get a message that I should switch to "Best Quality" to burn the DVD . I checked "Preferences" and it was set to Best Quality. Then I finally figured out that it was saying to change it in "Project Info" and when I did it was set to Best Performance and for a Single layer DVD. So I thought that was it. NOT! This may not be correct since I am trying to burn an image.
I tried to burn an Disc Image today and when I got home the Progress bar was at the end in the "Process Movie" phase. I checked the Activity Monitor which says that iDVD is not responding.
Can anyone help here? I am about to give up on iDVD period. Way too frustrating. Like I said , I can burn the same iMovie in Toast in 8 hours all day everyday. Not in iDVD 5 or 6.
Thanks
LargeAl

I tried to burn an Disc Image today
From what I've read here, that's not a good idea. Seems to be issues with the break point. Direct to DVD+R DL. I can't find anything from Apple to that effect though.
I have been trying to burn a 2 hour 20 minute DVD for three weeks.
Maybe it's time to break it into two projects...? Or shorten it to less than 2 hours?
G4 DP 1.25 GHz 2GB RAM 4 Drives 720GB Mac OS X (10.4.5) 2 SuperDrives (SL 8X & DL 16X)

J1inqefile - Excel output - Date field problem

Dear All,
       I am facing a problem while executing the tcode-J1IEQEFILE.
       When choosing excel file output and executing, 3 files are created. But the problem is, the value of date field in one of the files is not in date format.
    Please help me out on this regard.
Thank you,
S.Sridhar

I am also facing same problem in text file as well as in Excel file also. kindly some one could help me ( Date on which Amount paid and Date on which tax deducted).
Thanks
Venkat

Table Input Field Problem

Hi All,
I am facing a problem now where table row height is too big , as in 1 row size is actually a merged of 2 rows, the input field is shifted to the bottom of the cell. And when you select the row, an asterik is visible at the bottom row, and the input field is shifted up to the top of the cell. I am using customized iterator and cl_crm_ic_inputfield to render the cell. Anyone have this problem before?
Thanks!
Cheers,
cady

Hi Guys,
Some additional info i found on this issue. I am using design2003. I realized that the * added meant that its required field. However, upon further checking, when calling method RENDER_DESIGN2003 in class cl_crm_ic_inputfield, it checkes for me->required is not initial, which is kind of odd since the required field has the initial value of 'FALSE'. So , either required = 'TRUE' or 'FALSE', it will always be required field. Anyone encountered such problem before?
Cheers,
cady

DATE field problem in JSF code

Hi,
I am a newbie on JSF and working with a JSF application development. I have a problem with a data type: DATE. Here is what had happened; I tried to write a new record to a table, in my "write" paragraphs I have the following codes:
tabelOneDataProvider.setValue("joindate", rowKey, joinDate1.getSelectedDate());
tableOneDataProvider.commitChanges();
The problem is when I was running the program to write a record, I got the following error:
Cannot append new tableOne data: java.lang.RuntimeException: Number of conflicts while synchronizing: 1 SyncResolver.INSERT_ROW_CONFLICT row 1 Can't infer the SQL type to use for an instance of java.util.Date. Use setObject() with an explicit Types value to specify the type to use.
At that point, I was trying to write a DATE value from a "calendar' component (joinDate1 field with MM/dd/yyyy format) into a field name: "joindate' (data type is DATE) in tableOne file.
Any advice on resolving this problem? Please help me to get more knowledge on this. Thanks!

Hi,
You must use sql type. So instead of:
tabelOneDataProvider.setValue("joindate", rowKey, joinDate1.getSelectedDate());
tableOneDataProvider.commitChanges();try something like:
java.util.Date date = joinDate1.getSelectedDate();
java.sql.Date dateToInsert = new java.sql.Date(date.getTime());
tabelOneDataProvider.setValue("joindate", rowKey, dateToInsert);
tableOneDataProvider.commitChanges();best regards
Grzegorz

IDVD 3 calibration problems when burning

Help! I'm having calibration error messages when burning iDVD-R discs in iDVD 3. I've had success in the past with Maxell DVD-R 8X discs but other brands and other speeds won't work. I can't find Maxell DVD-R 8X discs anymore. Do I need to update the iDVD software? I'm at a loss to figure this one out.
Swen

hi sue,
i purchased the verbatim dvd-r and burned 1 dvd successfully. unfortunately, it will not burn again and i am prompted with the same error message: Power calibration area error: (0x73, 0x03). what is weird is that when i tried to burn a .mov file using toast, i was prompted with an error similar to the idvd error (0x73, 0x03). Could this be a problem with both idvd and imovie? i am able to burn data onto dvds within toast, just not files that i have created using imovie and idvd. i hope this makes sense!
thanks

Idvd image quality problems??

Will the length of video on a dvd created with idvd affect the quality of the image? I have just created a dvd which is pretty packed 3.7 GB are used on the dvd. Most of the video looks great. However some sections later in the movie (which when shot at night were much darker anyway) are pretty pixelated. I have created a DVD with a main movie, chapter selections and an extras folder which contains a bunch of 3 minute clips. The only place I really see teh pixelated image problem is while viewing these 3 minute "extras" clips.
I am wondering if by creating a "packed" disk, the overall image quality was degraded. And, is it a general rule of thumb that you should not try and cram in as much video onto a disk as possible?
Thanks for any help.
Pete

IDVD looks a the length of things ... technically you can put two hours total video on your dvd (this includes motion menus, slideshows, music, etc) You select Best Quality to do this
And yeh, generally a longer video will affect the quality of the DVD. In general, tho, you need the "strongest" video you can get to stand up to the MPEG2 compression
DVD Studio Pro with Compressor, gives you more encoding options and you can become adept at "fudging the numbers"
But in my opinion, with iDVD, anything longer than 90 minutes total can lead you to potential probs

Extraction from SAP, hidden fields problem

Hi Expeerts,
I have the following problem / question:
From an SAP Datasource (2lis_11_vaitm) we have some fileds, those are HIDED, and we need them. This is a central SAP, and a lot of BW systems connect to this SAP.
The problem is, that we need a field from that datasource (and other BWs do not need), that has 'HIDDEN' option. The SAP side is afraid of having problem, when they just uncheck that option. (TELF1; KONDA fields we need).
Does anyone know, what is the affects on other BW systems, when we unhide this fields? Of course we load with delta from this source.
If a field is hidden in SBIW-Maintain Datasources, am I right, that the delta does not collect those fields, or it is collected, just not sent to BW systems?
Any good idea, how can we get that fields in other way, because it seems, that the datasource cannot be modifyed, because of the other countries' BWs, connected to teh centra SAP.
I hope i were clear, but if not, please ask me.
Thanks for Your help.
Laszlo
Edited by: László Györkös on Jan 30, 2009 11:07 AM

Hi,
If a field is hidden in SBIW-Maintain Datasources, am I right, that the delta does not collect those fields, or it is collected, just not sent to BW systems?
--> As hidden fields are already available in extract strucute, unhiding will not create any problem. As far as i know hidden means it will transfer data from extract structure to further.
--> You can try pulling this particular data using generic datasource. OR
--> Enhance datasource by adding required fields and use. OR
--> Unhide files and use.
Note: Bit careful while transpporting datasource to production as time stamp changes.
Srini

IDVD 4 Audio problems

My audio works just fine in both iMovie, and iDVD. When I play the DVD I burned the audio works just fine for the menus, and slideshows. After playing a movie for about 00:01:30 the audio cuts off for the rest of the movie. Any ideas?
2.5 Ghz PowerPc G5 Mac OS X (10.4.8) Using iLife 04

There can be some goofy audio problems. One recommendation is to Extract the Audio from your problem clip while in iMovie and see if this makes a difference in the DVD. [this creates a separate sound file, which sometimes fixes audio problems]
The point where the audio stops -- is it the beginning of a clip? near a transition? or?
John

Images and image field problem

Hi
I would like the user to be able to upload an image that will be scaled proportionally to the size of the field pre determined.
I understand that options of image field: "scale image proportionally" is meant for this exactly.
For some reason, this works with images but not with image fields.
please see a printscreen I have made of the problem: same field size and same image uploaded
thanks

In Lightroom, there is no specific location where the photos should go. You can put them wherever you want, based upon your storage needs and hard drive setup.
So, with regards to your specific question, yes you can put the photos in the same folder as where the .lrcat is located, I can't see any harm, but I also don't think you need to do the work to make that happen. You can pretty much leave your photos where they are (which is easier and less time consuming) than moving them to the .lrcat folder, and easier and less time consuming than moving them at all.
In fact, I strongly suggest you change your thought processes from "Where do I put my photos" to "How can I organize my photos". Now that you are a Lightroom user, you organize your photos from within Lightroom, not by moving them here to there, but by adding keywords and other metadata. Organizing, now that you are LR user, is not folders ... it is metadata. Searching, now that you are a LR user, is not done in your operating system and in folders, it is done in LR by searching for keywords and other metadata.

Customer fields problem

Hi experts
I inserted a customer field in shopping cart item structure INCL_EEW_PD_ITEM_CSF_SC and now I am able to see it in shopping cart creation, the problem is when insert some information in this customer field it is imediately cleared, and I can't find it in table BBP_PDIGP.
Is it a bug, is there some note to correct it or the badis BBP_CUF_BADI and BBP_CUF_BADI_2 must be used, if yes how the badi must be used?
Thanks
Nilson

Nilson,
You might want to check OSS notes just-in-case. Howeveer, when we add fields to EBP, we added then to structure INCL_EEW_PD_ITEM_CSF and INCL_EEW_PD_ITEM_CSF_SC.
See, if that helps. If not, what version of SRM are you on?
Regards, Dean.

Clean prompt field problem - OBIEE 11g

Hello guys!
We are facing this issue: we have a prompt with 3 fields: Name, Document Number, Account Number. Each of this three identifies a person. We have an "or" relation between these fields. So, if I put Name, I don't want put Doc Number, etc.
So, the problem is when I had filtred by Name (for example) and last, I want filter by Acc Number, so, I must "clean" Name field (like using "backspace" on text in prompt) and last select an Account Number. When I click "go", report doesn't filter by any field, and gets all rows in results.
I think that this problem is because when we "clean" Name field, and try to filter again, it is putting "null" instead of default value in "name" field.
Any ideas? It is possible to "intercept" filter values and convert that "null value" in "zero value" or "generic value"?
Thanks for your time!
Regards,
Ariel

I would add a Filter View to the Compound Layout and check if there really is a Null being passed. It doesn't sound like that should happen automatically unless there's a space or something being left. Also, are all the prompts Text Fields?
Please assign points if helpful/correct.

IMovie08 - iDVD 08 Field Problem in Dropzone

Similar Messages

Maybe you are looking for