IMovie09 Audio Adjustments.  Volume reduction not working.

I have adjusted the volume in all clips in the project to 0%.  I put a music track over all video clips.  When I playback in the viewer all Audio is fine.  When I save as .mov file, the background audio from the clips is there.  I have made hundreds of videos and this has never happened before.  Is it some sort of bug?

Are you using any speed changes? (fast or slow motion?)
If so, iMovie 09 has a bug that will produce unpredictable audio effects.
The solution is to keep your speed changes to the pre-set tick marks, e.g. 25%, 50%, 100%, 200%, 400%, 800%, etc. If you use a custome percent like 58% or 139%, you will get the unpredictable audio.

Similar Messages

  • Firewire Audio Device Volume Control not Working

    I have a Presonus Firebox which has served me well from 10.3.9 to 10.4.10.
    I installed 10.4.11 last week, but after the reboot the Firebox would not sync with my G5. I switched Firewire ports and it synced back up. But now I cannot control the master volume on the Firebox using the MAC keyboard controls or the control in Audio Midi.
    Next, frustrated, I upgraded to Leopard and have the same symptoms. Sound works and records and syncs, but I cannot control the volume via the OS or software (which worked fine from 10.3 to 10.4.10) I have a Lacie D2 connected via FW800 and a Lacie DVD burner connected via its own separate Fw400 port from the Firebox.
    Any ideas?

    Try performing a system repair using PC Companion as this will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP

  • My volume key not working volume increase automatically, how to mute all audio

    my volume key not working, volume increase automatically if i go to audio settings i can adjust, but  again volume increase automatically , how to mute all audio

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comeback again?
    If this does not boring back a working volume control, and to rule out a software issue, set it up as new device, explained here:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If still no luck, you'll have to get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
    iPhone - Contact Support - Apple Support

  • My volume is not working when on the ringer what do I do

    My iPhone volume is not working when I have the volume set on. It will work with the headphones but other then that nothing. What's going on with it?

    supposedly from what I have read it is a software issue. I actually am also having this problem it worked after I performed a full reset,  but now it has started again tomorrow I am going to the apple store to find out what I can do as I bought my 4s right before the 5 was released.

  • Audio CD import is not working the cd is ejected before itunes can read it

    audio CD import is not working the cd is ejected before itunes can read it. Does anyone know how to fix this?
    Lainey

    Does this happen with all cd's or one in particular?
    Reset the SMC http://support.apple.com/kb/HT3964
    Reset the PRAM http://support.apple.com/kb/HT1379
    Try a cleaning disc. You can get them at places like Radio Shack.
    If nothing helps your optical drive has probably failed. You can replace it or purchase an inexpensive external drive. Don't buy the Apple SuperDrive as it won't work with macs that have a built in drive.

  • Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

  • Volume is not working properly

    Volume is not working. When listen to music. Can't even see on the screen the button to control the volume

    Have you tried http://support.apple.com/kb/HT4085
    Sometimes it happens. If not try a reset. Hold down POWER + HOME for 10 sec until the logo appears.

  • Volume button not working

    Hi,
    i have recently purchased a nokia lumia 620 and since yesterday suddenly the volume button to increase the volume is not working
    what can be done here ?
    please let me know in case of any clarifications.
    thanking you,
    regards
    Arpita

    Is it the same if you try without the Back cover ? If it works fine without it then put the cover back properly and check again..
    Else, you may try a soft reset : Press Power + Volume(down) keys until the phone vibrates (about 8-10 seconds). 

  • My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

    My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

    I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
    Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong.

  • Late 2009 imac 27, bluetooth keyboard pressing fn f11 volume down not working and automattically go to mute

    Hi all,
    having problem last few days with my late 2009 imac 27,  my wireless keyboard volume down not working when i pressing, up is working (f12). but when i press down (f11) after few pressing it will go all the way to mute.
    but the stranged is after awile ( if i have pressed up) it will go down all the way to mute as i didn't press anything. and if i leave it for awile my mute icon still show it on display and will not turn on my screensaver /  sleepmode.
    have osx 10.8.3 newest version. mountain lion.
    please help.

    i had the same problem like you did
    i wanna ask you something.How can i dod reset PRAM?
    Because when i restart my imac,the keyboard is shutting down.then it takes a time to reconnect again to imac.
    that time the screen appear in log in view
    help me out please

  • Beats Audio Control Panel software not working after Windows 10 upgrade.

    Beats Audio Control Panel software not working after Windows 10 upgrade.  the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties  I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device?  IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

    Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at  https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver.  I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update.  After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

  • HT6114 my audio midi setup is not working correctly since the install of maverick os

    my audio midi setup is not working correctly since the install of maverick os

    The upgrade may have reset to default settings ..
    Check System Preferences > Sounds > Output
    Make sure the correct device is selected and the Mute box is not checked.

  • Just updated I-Phone 4 and volume will not work

    Just updated I-Phone 4 to OS6 now my volume will not work.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    * http://kb.mozillazine.org/Lost_bookmarks

  • My nephew's iPad volume will not work? Any clue why?

    My nephew was messing with the "find my ipad" service, ended up erasing everything. i backed it up and now the volume will not work, not with the side button or even give it as an option on the music. I've checked the volume setting, the speaker work fine. I checked if he muted it some how but i can't figure out why sound won't play.

    You backup but do you backup with iTunes? If you do and you have an older backup... One that existed before you erased the device.... You can try restoring from that backup. Restoring from a backup restores the previous app preferences and settings to the iPad. If you decide to try this, turn off auto sync first so that you don't inadvertently overwrite the backup.
    Launch iTunes on your computer and go to Edit>Preferences>Devices, check the box at the bottom that says "Prevent iPods, iPhones and iPads from syncing automatically. You can also check in that window to see if you have any backups that predate the problem - the wiping of the iPad. if you do have a backup - Click OK. Quit iTunes.
    Connect the iPad to your computer with the cable and launch iTunes, right click on the iPad name under devices and select Restore From Backup. Select that backup from the menu (in case you have additional or multiple backups) and restore from it. Sync with iTunes after you restore from the backup.

  • Ipad mini water damage and now my volume does not work!

    Phone was in purse where I accidentally put a water(which I thought was closed tightly) and now my volume does not work!

    Water is generally fatal for iPads.  You might take it to your Authorized Apple Service Center and see what they can do for you.
    Prepare to replace your iPad.

Maybe you are looking for

  • How to send mail as a distribution list

    I have created a number of distribution lists under the groups tab just to the right of mailboxes in the recipients section of the exchange admin centre in microsoft exchange 2013. i have set permission on these mailboxes for send as to be permitted

  • Unable to back up contacts from Droid MAXX to cloud

    I am complete lost here. Ever since I installed Verizon Cloud all of my online storage for contacts has disappeared. I visit the coud site and it says there are no contacts there. I originally had Backup Assistant PLUS installed and it worked fine. T

  • Bug report about create new footprint with Rounded rectangle in 3D info Bottom

    I create new footprint with rounded rectangle in 3D info Bottom,the rounded rectangle must be in bottom,but In fact,the rounded rectangle created in top layer.i think it's wrong. I used ultiboard 10.1.357.

  • Printing from iPhoto 6.0 vs my Printer software

    I had trouble printing on a 4 x 6 from iPhoto but when I did it from HP software I had no problem. Anybody ever have this issue? Also any suggestions on how to go about calibrating my macbook and iMac to my printer? Any suggestions would be helpful.

  • All of a sudden my library has dissapeared.Help

    Last night I was using Itunes to burn some music to cd's, having no problems at all. This morning when I started my PC and went to Itunes my entire library, some 14,000 songs was gone. The interface I got was as if I had just downloaded a new version