Imovie11 audio on video clips does not convert when sharing, just get white noise

Imovoie 11 audio on video clips works in project mode, upon sharing to theater or file it generates whitenoise. Project mode has original video sound and added song paired correctly. Comes out as white noise in theater or new file.

Hi,
I did some more testing this time a shorter 2 minute video. Again trying to mute sections of the audio. I used garageband again to edit. Then convert the MOV with both FFmpegX and Flash 8. FFmepgX converted the file in about 1 minute, but still did not render the muted sections as mute.
I converted then with flash 8 it took about 30 minutes, god that is slow, but it did retain the muted sections. So I'm thinking maybe the FFmepgX converted has an issue with audio tracks that come from garage band.
Thanks,
Mike

Similar Messages

QT Pro 7.03 - audio recording - I just get white noise!

Just recorded an audio clip (off the radio) and what do i get??
Just plain white noise - completely useless!!!
I could monitor what I was recording as I was recording it and it sounded fine!
What's going on!???
(connection: Output of DAB into small mixer, into Audiophile 2496 soundcard - QT set to record quality "better" - hah! )

Use the Audio MIDI Setup application (Utilities folder).
If your recording setup is correct it should be identified with the app. Adjust the settings and test.
If you can hear it through your headphones or speakers you can also use WireTap Pro (free version) to record in .aiff format.

Audio in video messages does not work

When I record a video message for someone, the audio does not work properly. It either doesn't work at all (silence is recorded), or cuts out after a 1-2 seconds. The problem seems to be confined to the MP4 video/audio encoder used by Skype for video messages.
My webcam (Logitech HD615) works properly when used for Skype calls (including the built in microphone), and when used in other applications. With other applications, I can also record videos and the audio is captured and encoded correctly. Although the problem does not seem to be the webcam, I have re-installled the webcam drivers and I have tried changing USB ports for the webcam.
I have re-installed the latest version of Skype and verified that Windows has the latest updates (I'm using Windows 7). I have tried re-booting a number of times when debugging this issue.
I have looked at the mp4 file that's created in the temp folder when Skype records the message - the audio is missing/broken regardless of what player I use. This, and the fact that the webcam works makes me believe that the problem is in the Skype use of the audio/video encoder, or the encoder itself.
Any ideas on how to solve this problem?
Thanks,
K.
Solved!
Go to Solution.

When you change the USB ports, make sure not to use USB 3.0 ports. I had a very similar issue with Logitech c920 webcam. Changing the port to USB 2.0 has solved the issue.
http://community.skype.com/t5/Windows-desktop-client/No-sound-on-video-messaging-playback/m-p/274382...

IPhoto video clips does not work in iMovie

I just installed Leopard and ilife '08 into my MAC.
The video clips from my iPhoto library are not shown properly in iMovie. I'm only able to hear the sound of the clip but unable to watch it. when i skim through the clip, i don't see anything on the viewer, i just hear skimming through the sound. when i tried to play the clip, just the sound began to play. even the thumbnail does not show a picture of the clip, its just grey.
Can someone help me please???

Format: Apple OpenDML JPEG, 640 x 480, Millions 16-bit Integer (Little Endian), Mono, 44.100 kHz
As post in your other topic, this looks like it should be compatible.
I've captured video from my built-in isight camera in my MacBook. when i was trying to skim through or play the video clip in iMovie, the clip didn't appear in the side viewer. I am able to hear the voice of the clip and even see the thumbnail clearly but not in the viewer.
This sounds like part of your original problem. Suggest you try importing the same files to an alternative platform and/or possibly an alternative user account to see if the problem is "global" on your system and "limited" to your system only. Suspect you may have a bad install or corrupted application that may simply be generating unusable "thumbnails" here. You basically need to isolate the problem to see if it is in OS and/or application. For instance, did you update to iMovie v7.1 before or after installing Leopard or better yet, have you installed all of the updates?

Part of in project entered video clip does not play.

Much to my surprise certain video clip parts entered in a project do not play at all.
Instead the same clips previous part gets frozen!!
I tried not to have any theme and it still happens.
Is this a known issue? IMovie 09
Clogz14

Thanks, Old Toad,
I know what you are referencing. I just never go to that folder but that is where I do publish the site prior to uploading it onto the internet using the FTP.
And, it is when I have published the updated pags to the the Local Folder, the video plays perfectly well.
Soooo, it must be all about restricted bandwith that I am currently using with my domain web host ISP, which is a shared bandwidth. Economics affect me as a volunteer therefore cannot afford the higher speed which is not a shared bandwith.
To add to my demise, I have issues with signing on to YouTube through my Google account. Try to sort that one out is impossible. Tried for hours but all to no avail to get signed in. So I can't upload my videos which is too bad for my website.
Will chat further with my domain host and see what other options are available to me.

Self-made video clip does not play completely on website

I have a short video clip [1:22 minutes/40.6 MBs] taken using my Canon Sureshot camera and mounted on one of my webpages. It plays fully in iWeb's publishing site but after uploading it to my domain host's internet, the video only plays half way. The play icon moves but there is no advancement of the clip or sound.
I contacted the domain host provider and they have not been too helpful other than to suggest uploading to YouTube in order to get a weblink. I would prefer the video clip on the page rather than a weblink.
There is speculation my web space is full to capacity, but it has not been verified. If there is enough web space, what is the key factor I should know to have this video clip playback in its entirety once it has been uploaded to the internet. My FTP program indicates it has been uploaded successfully in the Directory, Media, Scripts and Hypertext files.
I'm not a high-level techie, but still want to have videos on my website as I see on many others. It may mean upgrading for more web space. Before I do, I thought I would check it out with the support group to see if there is a solution to uploading successfully a video clip to play in its entirety.
The webpage link is: http://thebigbenmemorialtrail.ca/New_Scouting_Team.html — the video is still mounted for the purpose of my seeking help.
Many thanks, in advance.

Thanks, Old Toad,
I know what you are referencing. I just never go to that folder but that is where I do publish the site prior to uploading it onto the internet using the FTP.
And, it is when I have published the updated pags to the the Local Folder, the video plays perfectly well.
Soooo, it must be all about restricted bandwith that I am currently using with my domain web host ISP, which is a shared bandwidth. Economics affect me as a volunteer therefore cannot afford the higher speed which is not a shared bandwith.
To add to my demise, I have issues with signing on to YouTube through my Google account. Try to sort that one out is impossible. Tried for hours but all to no avail to get signed in. So I can't upload my videos which is too bad for my website.
Will chat further with my domain host and see what other options are available to me.

ITunes video playlist does not loop when using apple tv/airplay

I have made a video playlist in itunes, I have made sure that each video file is not set to "skip when shuffled" and I have also gone into appletv settings and ensured that looping is turned on. When I shuffle this playlist, it plays through airplay to my apple tv, but after each video in the playlist has played the playlist stops.
I would like the playlist to continue indefinitely until I decide to press stop. Does anyone have any thoughts on why this does not happen?

looping videos on Apple TV from iTunes
fixed :-)

My iPad does not ring when I am getting a FaceTime call. And my volume is on. Also I have noticed when I charge my iPad at night I no longer hear that connection sound that it used to make. And lastly, my iPad will not flip when turned.

I no longer get a ring tone in face time when receiving an incoming call. My volume is turned on. Then I noticed when I charge my iPad at night, when I make the USB connection, it does not make tha connection sound any longer. And now my iPad will not flip. It only stays in one direction. Has anyone experienced these things? I do not know what to do about these issues. Thanks.

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

My video sound does not work when added to a pdf

I just bought adobe acrobat pro and when I insert a video it plays but with no sound. I have tried several different videos (quicktime) and they all do the same thing. I am working on a mac

Think I got it to work:
Just added the SetSystemStream in the button scripts that jumps to the chapter menu. Now I can go directly to a chapter point and have the subtitles on or off, depending on the GPRM value (that is set in the Language select menu).
Not sure if this is the best way, though. Scripting can be done in many ways - I tend to use separate scripts rather than having a few and more compex scripts. Works for me - most of the time.
G4 Dual, FCP5, DVDSP4, BitVice, Soundtrack Pro Mac OS X (10.4.3) 2 GB RAM, SuperDrive
G4 Dual, FCP5, DVDSP4, BitVice, Soundtrack Pro Mac OS X (10.4.3) 2 GB RAM, SuperDrive

Entire frame of mini-dv video clips do NOT show in the iMovie '11 viewer in playback mode

I am editing a wedding video in iMovie11 that was recorded on a mini dv tape. When I move video clips from the event library to the timeline, the entire frame is displayed in the timeline. However, the entire frame of the video clip does NOT show in the iMovie viewer or when I playback the video. I exported the video and burned it to a dvd using Toast 11 pro. The video recorded to the dvd as it was showing in the iMovie viewer... the full frame does not show. I would certainly appreciate any advice as to how to solve my problem. THANK YOU!!!

Is your video shot in 16:9 aspect ratio or 4:3?
You can go to File/Project Properties and set the aspect ratio for the project.
When you get a clip that does not match the project's aspect ratio, you use the Rotate, Crop, Ken Burns tool on the middle toolbar to specify how it should be treated.
FIT will place the entire clip in the movie, and will letterbox (black bars) so that it fits.
CROP will fill the screen, but will cut off the top and bottom of your frame.

I have a clip with synchronized audio. When I trim a section of video it does not trim the audio. How do I trim both video and audio so that the clip remains in sync?

Why is FCPX not allow me to cut both video and audio tracks at the same time?
My separate synchronized audio does not trim when I trim the video. They are connected and synchronized.

fulei wrote:
The audio track does not edit along with the video. They go out of sync
Sounds like a different problem than your trim problem in the first post. If your problem is they drift out of sync, we'd need to knoow more about the project and clip properties – including how the audio file you're syncing to was created.
Russ

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1. Thanks for any input.

HT4061 I have video clips from a stills camera on my computer. When I sync my iPad to my computer and ask for the photo files to be transferred (including videos) it does not transfer them

I have video clips from a stills camera on my computer mixed in with still pictures in various files. When I sync my iPad to the computer and ask for the files to be transferred to the iPad the video clips are not included (even when I tick the box to include videos). How do I rectify this.

How to use your iPod to move your music to a new computer

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Imovie11 audio on video clips does not convert when sharing, just get white noise

Similar Messages

Maybe you are looking for