Imovie8 Import Incomplete Project

How can I re-inport an incomple imovie8 project back into the Imovie Project library, from its current position in the home imovie projects file?
It wont allow it?
IDVD wont accept it either with the message... "that it hasnt been prepared for sharing. First open the file in Imovie and prepare for sharing"...which it cant be.
Cheers tach masters

In the Finder, move the rcproject file to the Movies/iMovie Projects folder. Then open iMovie. You should see this project in the Project Library view.

Similar Messages

Error importing old project into Premiere Elements 11

Trying to import old project backup - that I made a couple of years ago. When importing the Project file, I get the error
"The selected file cannot be linked because it's type (video) does not match the original files type (audio and video)."
I try and select the file, but it then gives the error "The selected file cannot be linked because its type (audio and video) does not match the original file's type (video).
If I skip the ones that give me the error, I get an incomplete edit - with lots of bits missing.
HELP!!! I need to sort this asap......for a client.
Thanks

filippinno
Here is my plan, either a start to better or a dud. We are going to start small to get a foothold in this.
My major puzzlement is you telling me that you are replacing video with video and getting the message
The selected file cannot be linked because its type (audio and video) does not match the original file's type (video)
.The only time I have ever seen that message is when someone is trying to replace still with video or video with still.
At this moment, where are the source media that went into the original Premiere Elements 9.0/9.0.1 project? Let us say, all in Documents in a folder named Special - all have their original names. Given that you are 100% that they are the ones that went into this project...the type (video or still) and file name and file extension.
I am not sure if it matters for this test whether or not you are using Premiere Elements 11 or 9.0/9.0.1, I just want to find out what is going on with your source media.
(a) Open the project using Skip All if you are hit with a bunch of "Where is....?" messages which I assume you will be.
(b) Go to the Timeline, pick a file with the colorful Media Offline display, write down the file name from its title band.
Right click that file on the Timeline and select Find in Media.
From Organize Media, delete the Media Offline thumbnail that was pointed out to you clicking Reveal in Media.
Go back to the Timeline and this same file, right click it and this time select Reveal in Project. That should take you to Project. Delete the file there that Reveal in Project points you to. That will also delete is counterpart on the Timeline. All traces of that particular Media Offline file are now gone in the project.
In that project, go to Get Media/Files and Folders and browse to and select the original file (with the exact same file name and kind that you just deleted from the project) that you have saved back in that Special Folder in Documents.
Drag that file from Organize Media or Project to the Timeline in the space made available by your deletion of it as an Media Offline thumbnail.
Does that work to replace that particular file. Is it the file that you had there originally? Keep in mind that we are identifying this file by name in each step and need a match of file name from start to end.
If this works for one, then we can plan around this basic finding. And, if this works we may revert back to Replace Footage. But, let us see what happens here first.
What is your estimate of how many of these Media Offline displays are there to be dealt with? How many of the media are in place on that Timeline and are no problem?
Looking forward to the results.
Thanks.
ATR

I am trying to import BPM Project.zip file into Oracle enterpriserepository

I am trying to import BPM Project.zip file into Oracle enterpriserepository from admin tab.
I am getting the following exception. please help if any one know the solution.
Performing import...
Import Failed: Error [100]: An unknown server-side error occurred. Please record stack trace (if available) and contact technical support.
com.flashline.exception.LoggableException: trouble parsing file in import bundle: SampleWScall/activityGuide.agdl
     at com.flashline.cmee.openapi.service.subsystem.impexp.XMLTranslator.decode(XMLTranslator.java:157)
     at com.flashline.cmee.openapi.service.subsystem.impexp.ImportJob.doJob(ImportJob.java:74)
     at com.flashline.cmee.openapi.service.subsystem.impexp.AbstractJob.perform(AbstractJob.java:75)
     at com.flashline.cmee.openapi.service.subsystem.impexp.JobThread.run(JobThread.java:41)
Audit results stored in:
C:\Users\AVINAS~1.YEL\AppData\Local\Temp\import-4705112223687937017.log
Audit for [Import job.] created on [2012-09-24 11:53:59 IST].
2012-09-24 11:53:59 IST - Adding Import job with ID=[50403] to job queue.
Thanks in Advance.

Hi
Why are you trying to import BPM zip file are you trying to configure the out of the box workflows?
They are something that need to be deployed from the process admin on BPM.
There would be the .exp file you would need as its BPM 10g that you would need to use.

Importing a project into PE 12 trial version, not all audio tracks play back!

I'm trying the trial vesion of PE 12. Imported a project that I had created with PE 9. Everything appears to have been imported, including all the audio tracks. But when i play it back, some of the audio tracks are completely muted, while others, are fine and I can hear it.
Any idea what can cause this?

With "muted" Audio Tracks, I would look at a few possibilities, and especailly with a Project created in an earlier version of PrE:
Open Audio Mixer, and look to see if any Tracks are Muted.
Play the Timeline, and observe the Levels in Audio Mixer, and also whether there is any movement of the "sliders" in Audio Mixer.
Observe which Audio Tracks your Audio Clips are, in the Timeline, and report those please.
Making sure that Keyframe Display is set to Volume in your Audio Clips, are there any Volume Keyframes?
I am sure that others will have a few more ideas, and questions.
Good luck,
Hunt

Importing iMovie project

I've heard that I should be able to import a project form IMovie to FCE HD I'm not having much luck . I only have clipe no transitions no titles. Do I need to prep this in some way first?
When I simply import the .mov there is sporatic audio wave form and when I play it I get sonar sounding beeps before it crashes the app.
Newbie
Thanks
Leslsie
iMac G5 2G Mac OS X (10.4.6) 2 Gig RAM

I have no experience with iMovie 6.
Regarding rendering, just press Command and R.
It will render everything usually, but under these circumstances it should only do the audio as that is all that will need rendering.
Ian.

Importing web project into Workshop 9.2

Hi,
I'm trying to import an existing web project into Workshop 9.2.1 from my Subversion source. Unfortunately Workshop doesn't recognize this project as a valid web project.
I imported the code project using 'File>Import>Existing Projects' into Workspace.
Unfortunately, I get the following errors:
- "The library module reference : beehive-netui-1.0 is not allowed from the classpath of a non-web project, only JAR,EJB, and EAR module types are allowed."
- "The library module reference : jstl is not allowed from the classpath of a non-web project, only JAR,EJB, and EAR module types are allowed."
How do I tell Workshop that this project is indeed a web project?
Does anyone have any suggestions?
Thanks,
Derrek

Wow.... I figured out a workaround (aka Ugly Hack). It seems that Workshop doesn't properly import Portlet projects. Here's how I got around it:
1. Checkout the code from Subversion
d:\MyProjects\Project\trunk\MyComponent\
2. Move MyComponent to a temp directory
d:\MyProjects\Project\trunk\MyComponent\ --> d:\tmp\MyComponent
3. Open Workshop and create a new Portal project and PortalEAR project of the same name as the MyComponent projects
File>New myComponentPortal
4. Copy over the src and WebContent directories in the SVN directory with the files from tmp.
d:\tmp\MyComponent\src -> d:\MyProjects\Project\trunk\MyComponent\src
d:\tmp\MyComponent\src\WebContent -> d:\MyProjects\Project\trunk\MyComponent\WebContent
5. Refresh Workshop and let the spooky voodoo happen. Viola! Now I've got a running portal project with a SVN connection.

Importing a project from RH 6 to 9

Hi There
I am trying to import a project from RH 6 to 9. I have managed to do it successfully once but when click to Open a Recent file Online Help HHP file I get an error message "No current file". I have tried to Import HTML Help Project I get the same message. Any ideas?
Thanks
Melissa

Opening the .xpj file should just work. Can you provide detailed steps of what you are doing?

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

Importing EDL project frame rate is always 23.98

Hi There,
I'm importing a 24 frame EDL. All of the import settings are set to 24 fps. However on import, the project frame rate is always 23.98.
I have added the number 24 to the defaulteframerate section of the preferences file, but no luck.
Anyone found a solution to this?
Thanks

Just a wild guess since I don't normally work in 24 fps... all of us NTSC-biased types accept that 23.98 (more accurately, if not absolutely precisely expressed as 23.976) is the "pull-down" frame rate that results from a telecine transfer, and is the rate that is assumed, corresponding to 29.97 or 1000/1001.
This framerate is emulated in a number of "Digital Cinema" electronic origin formats.
Absolute 24.0000 fps is a bit rare in these parts and in reality probably would only come up if one were working with a dpx image sequence properly scanned, not telecined.
Not saying that 24.000 does not exist -- I'd say that it is just as uncomfortable a fit in 25 fps-land as it is here! And Color / Final Touch has been notoriously bad with 25 fps.
good luck and merry christmas....
JPO

Importing a project from Sony Vegas

I'm trying to import a project that was initially edited in Sony Vegas to do audio and color correction in Final Cut. Apart from rendering the project out to an HDV tape, and re-importing it into Final Cut through Log and Capture, what is the best methodology so as to retain the most data for timelines, etc.
We can even go so far as to have the original hard drives, but I just can't fathom how to migrate into final cut.
Suggestions?

The back to tape method sounds good. Otherwise using flip4mac to import an intermediate AVI's is also good.
Does Vegas export EDL's ?

Importing existing project to Project Online

Hello, my company recently purchased Project Online to add to our existing Office 365 environment.
From the Project Web App home page, I would like to use the Create or Import projects tile to add an existing .mpp project file that I have uploaded to my SkyDrive to Project Online, and manage this project from the Project Web app.
However, I cannot figure out how to do this or if it is even possible. The tile itself says "Create new or import from Sharepoint sites and project files.". To import an existing project you're then referred to this site: http://office.microsoft.com/en-us/project-server-help/more-ways-to-create-or-import-projects-HA102923810.aspx.
On that site the only listed ways of importing an existing project are to import a Sharepoint task list (not what I want) or by connecting your local Project Pro to Project Online and publishing the project.
Importing or uploading an existing project file directly to Project Online would seem to be a fundamental basic usage of Project Online. Do I really need to also purchase Project Professional in order to import existing project files to Project Online?
Thanks

Project Online cannot read mpp files, hence the reason for requiring Project Professional 2013 if you want to import these into Project Online - even if you only want to manage them via Project Web App from then on.
If you've not got Project 2013 Pro, you could cut and paste the existing task list from Project into a SharePoint list, and create the project from there.
The way forward will depend on the complexity of your schedules, remember that PWA does not have all of the capability of MS Project 2013
Ben Howard [MVP] blog |
web

Importing a Project outof memory error

Hi all,
When i am importing a project (xml) file which was a 210Mb size.Getting outofMemoryerror .Is there any limitation ???
Any suggestions?
Note: using BI APPS(OBIEE) 7.9.5.2 ODI Project
thanks,
saichand.v

Hi Saichand,
Try increasing the HEAP size in ODIPARAMS.BAT/SH file which reside in <ODI_HOME>/oracledi/bin
set ODI_INIT_HEAP=32m
set ODI_MAX_HEAP=256m
to
set ODI_INIT_HEAP=256m
set ODI_MAX_HEAP=512m
or so.
Where M stands for MegaByte.
If the above solution wasnt work out, upgrade ur Java to 6 or so.
Thanks,
Guru

How can I import an project .imoviemobile file to imovie 10.0.6 on my mac book for further processing

How can I import an project .imoviemobile file to imovie 10.0.6 on my mac book for further processing?

You can't. (http://www.macworld.com/article/2057972/imovie-for-ios-projects-no-longer-work-o n-the-mac.html)
Geoff.

Error while importing MS project into cProject

Hi
I am getting the below error while importing MS project client file or XML file into cProjects.
dpr_shared087
Logon language becomes original language
Message no. DPR_SHARED087
Diagnosis
The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
System Response
The logon language becomes the original language of the new object that was created.
Kindly suggest what configuration data if any is missing.
Regards
Srikrishna

Hi
I am getting the below error while importing MS project into cProject.
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
Kindly suggest, if the below steps for importing MS project is ok or not?
step 1: Create project in MS project with tasks.
step 2: Maintain maping fields of MSP in cProject configurat
step 3: Import MPP file into cProject using "Import" button.
step 4: I am getting the above error while importing the MPP file.
Regards
Srikrishna

Library project errors and imports of projects using them

So this is something that I have put up with in FB for a long time now, but I decided to try doing some research today to see if there is a workaround as it is very annoying. Unfortunately I couldn't find anything.
I attempted to file a bug/feature request, but it turns out that for some unknown reason FB is the only Adobe application that gives a link to another url (http://bugs.adobe.com/flex/) and, today at least, the link is dead so I have to post here instead.
The problem is with library projects (which I love by the way). I use them a great deal and for more than just creating standalone APIs. As do many others, I like to have the core of many of my cross-platform projects in a library so that I can create other ‘harness’ projects for different runtimes and use the same bulk code. This way I can just write code in each master project that is particular to that runtime be it air or web or whatever - this is a great bit of functionality that I would really miss were it not there.
As a result of this workflow however, I am often working in the library project directly in order to update all versions of a project. The problem arises when there is an error in the library project. When this happens, all the projects reading from the library lose all linkages to the swc and as a result the problem tab fills up with hundreds of problems that don’t exist, because as far as those projects are now concerned the swc no longer exists.
Now I understand why this happens but surely FB could be made to understand what is going on and override (what I assume is) the compiler’s behaviour, and just not display these errors.
This whole thing is exacerbated by (and may not even be that big a problem where it not for) the fact that I am forced to turn off 'build automatically' due to the 4.7 crash bug that has been reported here numerous times. Because of this I tend to write large chunks of code between each compile so I don't instantly know what has broken.
Please save the feature that I enjoy so much by either getting FB to deal with the situation better or by fixing the crash bug so I can use ‘build automatically’ again… or god forbid… fix both!! I can dream. J
If anyone has any good tips regarding this please let me know.
Many thanks,
James

Can I then delete the project from the hard drive (as it's now in the library?) or will that delete the whole thing forever?
That depends on how you did import the projects. If your images are referenced they might still be stored in the previous projects, but if your library is managed, then it will be save to delete the projects you already imported.

Imovie8 Import Incomplete Project

Similar Messages

Maybe you are looking for