Imovie9, 13"macbook aluminum and USB external drive

I know firewire is better, but is it totally impossible to use USB. Others have said its ok. Tom Wolsky on the FCE forum said that many people are returning the macbooks without firewire. I did a search on other discussions and some say its ok, while others say no.
Please do i really need a macbook pro or a white macbook. I will be editing HDV and eventually AVCHD.

Thank you! Yes. I have HDV today with an imac. I am deciding between the new macbook and the new white macbook. I really want the small form factor. I should really just buy the white one since it has firewire, but I don't want plastic and i like the new touchpad. I also want to get a flash drive HD camera that uses USB. I got concerned using a USB External drive for the AVCHD because of file sizes and making the USB drive unstable. I think i will ensure that i keep enough hard drive space on the macbook to do all editing and then move as much as I can to the external drive.

Similar Messages

Airport time capsule and usb external drives

Just purchased airport time capsule. Questions about using external drives through the usb port on the airport.
- If I am using a powered USB hub should I be able to connect multiple drives?
- Is there a performance/speed difference between going through the usb port on the airport vs. usb hub to the usb slot on the Powerbook
- When I thried one of my external drives it did not display on the desxtop. Instead it was a "folder" in the Airport Time Cabsule. Is this normal?
Thanks

If I am using a powered USB hub should I be able to connect multiple drives?
Yes, if the drives are formatted correctly in Mac OS Extended (Journaled) or FAT 16/32.
Is there a performance/speed difference between going through the usb port on the airport vs. usb hub to the usb slot on the Powerbook
Yes. The USB port on your Mac is probably twice as fast as the port on the AirPort.
When I thried one of my external drives it did not display on the desxtop. Instead it was a "folder" in the Airport Time Cabsule. Is this normal?
Yes. The drive connected to the Time Capsule is a shared network drive. Only drives that connect to your Mac directly via USB or FireWire will appear by default on the desktop. If you try to use Disk Utility with a network drive.....you will not see the drive.

WD My Passport 1TB USB external drive randomly ejects from my iMac and MacBook Pro. I have tried two separate USB cords. I have updated the firmware. I have tried it on my MacBook, two different Macbook Pro's, and my iMac. All give the

WD My Passport 1TB USB external drive randomly ejects from my iMac and MacBook Pro.
The drive is approximately 4 years old. When the drive is plugged in, I can see the data. It appears to be working properly. The only problem is that everyone of my Apple Machines are ejecting it. Several years ago, this drive connected to Mac machines with no problems. I have tried two separate USB cords. I have updated the firmware. I have tried it on my MacBook, two different Macbook Pro's, and my iMac.
All give the same result of random ejection of the drive and the error message of:
Disk Not Ejected Properly
Eject "1TB Passport HD" before disconnecting or turning......
Searching through the web, it seems this is an common/known problem. Does anyone know the solution?
Thanks,

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

I have a new 2.0GHz Intel Core i7 macbook pro and my external firewire drive is causing the laptop to lock up

I have a new 2.0GHz Intel Core i7 macbook pro and my external firewire drive is causing the computer to lock up. The drive seems to sleep and then never wakes and the laptop locks up. I've had this drive connected to an older 2.0 core duo macbook pro and a 3.0GHz quad core macpro with no issues. It's a ministack v3 drive, 2GBs, fw400+800, sata and usb. Any ideas? And can I stop the drive from going to sleep?
Thanks.

Check with the drive's manufacturer to see if they might have a firmware update for the enclosure; it sounds like the enclosure's firmware isn't properly detecting the FireWire wakeup sequence.
Obviously this could also be a bug with the new MBP's firmware, so it wouldn't hurt to ask the Genius Bar at your local Apple Store; in particular, ask them to show you that the sleep/wakeup sequence on your MBP works with some other FireWire drive.

MacBook Air USB external drive power source

I have a LaCie 250GB USB external drive on my MacBook Air and the computer is not being able to power the drive without me connecting the hard drive to an external power source. when the drive was had about 80GB of data it would do it, now that the drive has about 180GB of data, it does not work. Can anybody recommend a solution or an external drive that can hold at least 250GB that can be powered by the MacBook Air without need for external power source?

I have the same time of problem. Although, it's mentioned a using a self powered hub. However, I find this did not work. Apple states that the single usb port on the MBA is high powered to give the ext. super drive they sell the power it needs to connect to the MBA. What I have noticed is no matter which USB self powered hub I use I get the same results. The MBA reports that one or more devices is drawing too much power. Although, the powered hub is supposed to provide power to those devices that require power over USB. I should also mention, all I am connecting are two USB devices. 1 ext. Verbatim 500 Gig Drive. and my iPhone. Since the MBA has only 120 gig drive I had to move all of my movies etc. to the Ext. 500 now if I want to sync my phone or move a movie to the phone I get the errors.

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

MDT 2012 deploy OS from USB external drive failed - need to unplug and plug it once again

We are using MDT 2012 and deploying Windows 7 using media (USB external hard drive). We can successfully deploy Windows 7 32 bit using this method but there is a problem with deploying Windows 7 64bit. This problem appears only on HP EliteBook 840. We can
boot into WinPE 64 bit and can start proper task sequence, all image is applied then after restart, before logon screen appears there is an error saying that cannot find litetouch.vbs script. After clicking ok, I can logon to Windows and there is no usb external
drive recognized. But when I unplug and plug usb drive once again it is recognized by Windows and can be used. I can see that Windows install some drivers just after plug it again
I checked BIOS looking for some USB power options - there is no such settings. And 32 bit deployment works ok. So this is not a case. Looks for me like a problem with proper usb drivers for 64 bit. I download all drivers from HP website (driver pack and
drivers only for USB 3.0). We are using make and model matching in MDT - works ok for all the rest hardware models. Any idea how to troubleshoot it?

Not sure what's going on here. Is this a USB "Flash" drive or a USB "Hard Drive". There *Is* a distinction.
I *thought* that MDT would copy itself to the c:\minint\scripts folder to continue installation.
Next time, when you see this error, Press Shift-F10 to get into a cmd.exe prompt. Can you find litetouch.vbs on any of the drives? Does the USB Drive appear?
IF in fact, the USB Drive is not appearing after the 1st reboot, then you have a problem. Why did the USB 3.0 driver not install. Check the Driver Installation Logs to verify.
Keith Garner - keithga.wordpress.com

Using a usb external drive with logic

I have a 500 GB Lacie usb hard drive which I'm currently using just to backup my system. (Still on Tiger by the way.) I'm in an older intel iMac (1.83. 2 gigs ram, 250 gig internal hard drive). After installing LP 8 and all the bells and whistles on the internal drive I now have less than half of my internal drive space available. My logic project files are there as well. Not a big problem but I'm trying to look further down the road... Usb drives are slower than firewire but my projects are relatively simple. I don't record more than 2 tracks simultaneously and rarely exceed 24 tracks total for a song. Two questions. First can I get by with my usb external drive? And second how do I move my projects onto and external drive and still have logic know where they are? Thanks

I have the oldest macbook (1.83. 2 gigs ram, 60 gig internal hard drive)
I have all my logic content on my external maxtor firewire 400 drive (usb 2.0 is actually faster than firewire 400) and everything is fine. the good thing is if your external drive has 7200rpm, but the ones with 5600rpm should do as well.
Once you drag your apple loops to logic from your external drive, logic will remember for the next visit. And when you are opening a project which is on the external drive , just find it with logic finder and all should be fine.

USB External Drive Backup & Erase Woes

I have been using a Lacie 500GB USB external drive allocated as a backup disk for time machine. Over the last couple of weeks, the disk has been spontaneously ejecting itself from the desktop. This could happen when not backing up to time machine, or during the backup.
I am not a daily time machine backup-er, as I don't have much to backup on a daily basis (and I weekly backup to an alternative disk using Super Duper). What I had noticed with the time machine disk, is that the preparation prior to the backup beginning was a massive 40+GB, certainly not the amount of data which would have been 'new'.
To try to resolve this, I have used disk utility to verify the disk, and the snow leopard disc to check my boot disk on the Macbook Pro... there has not been a problem identified with either.
Today, I decided to erase the time machine disk, zero the data, and re-allocate the drive for time machine backup. After setting these preferences in disk utility, and clicking 'erase', the disk again erased itself, with the error message :
'Disk erase failed with the error: Assert: internal error, or unimplemented'
I then had an external disk which was not present on the desktop, and apparently in some sort of limbo between erased and mounted!
I was able to do a simpler format function on the disk via disk utility, the disk will mount, but the allocated disk space previously used by time machine is still present, and the format has only done that remaining space on the disk.
Anyone know what the above error message refers to, am I able to reformat the disk using the 'zero function', or has the disk failed and become unrecoverable?
Answers / suggestions kindly welcomed.

Welcome to Apple Discussions.
When you use Disk Utility to erase totally you need to click on the LaCie drive name not the name that appears on the desktop. Select how many partitions you want and give each partition the name you want it to have and perhaps also the partitioning scheme and other options that are available, then erase.
Doing this will of course make all that is on the drive unavailable to you.
These are LaCie's directions for their drives.
Some LaCie drives might also have firmware updates available - worth a check on their website.
Note that LaCie seem to have 2 yr warranty on their drives, at least the one I looked at on their website. If the drive is younger than this you might have a warranty claim.

Unable to view folders of a usb external drive connected to AEBS

My Macbook can see the External Drive connected to AEBS but unable to browse the folders. When I click the external drive to view the folders the beach ball remain spinning for a long time and then gives an error unable to connect. My MacBook Pro can see all the external drive files with no problem.

How is that drive formatted? It needs to be Mac OS Extended (Journaled) or FAT32 for the AirPort Extreme to be able to read the disk correctly.
In most cases, you will also need to use a powered USB hub with the AirPort Extreme....even if the hard drive has its own power supply since the USB port on the AirPort Extreme is under powered.
My MacBook Pro can see all the external drive files with no problem.
Your Mac can read more types of drives than the AirPort Extreme.

Usb external drives not showing up in lion

My USB external drives are NOT showing up in finder or my disk utlity.
But they are showing up in my System Information!?
In addition, they both work fine on my other laptop.
I can I troubleshoot this on my mac?
Relevant Info:
Mac OS X Lion 10.7.5
MacBook Pro
USB Kindle Updated OS
USB External Drive

I reset my PRAM and it works now. I've no idea what that did...
Thanks for the help.
MC

Kernel Panic when attaching time machine USB external drive

Really hope someone can help me with this.
I've got a late 2011 Macbook Pro, and was running Time Machine on a 500GB GDrive USB external drive. Was working fine when I last attached it on Feb 29. The Time Machine backup was encrypted.
When I tried to use it yesterday, as I have lost all my iTunes data on another drive, I got a Kernel Panic when I entered the password for the drive.
I managed to de-encrypt the drive using Disk Utility, but now I get a Kernel Panic everytime I plug the **** drive in.
I really need this backup data, would appreciate any help people can offer. Am running Lion 7.3, and the same error occurs on a Lion iMac that I have tried the drive on.

Really hope someone can help me with this.
I've got a late 2011 Macbook Pro, and was running Time Machine on a 500GB GDrive USB external drive. Was working fine when I last attached it on Feb 29. The Time Machine backup was encrypted.
When I tried to use it yesterday, as I have lost all my iTunes data on another drive, I got a Kernel Panic when I entered the password for the drive.
I managed to de-encrypt the drive using Disk Utility, but now I get a Kernel Panic everytime I plug the **** drive in.
I really need this backup data, would appreciate any help people can offer. Am running Lion 7.3, and the same error occurs on a Lion iMac that I have tried the drive on.

Having troubles reading usb external drives.

I have a macbook pro, mid 2010 is when I got it. The issue I've ran into for about 6 months now is my usb external drives are not currently being recognized. It's only external drives and thumb drives though. My mac recognizes my iphone, charges my camera usb, lets me use a usb midi controller. About six months ago I was having trouble connecting a usb dmx lighting interface. I called the company and they sent me to a workaround and it worked. http://groups.google.com/group/dmxis_users/browse_thread/thread/c5746c10c618bf19 ?hl=en_US
Ever since then, it's never been the same my external drives don't work. I even took it to an apple store and replaced the internal boards. (Sorry for not knowing specifics) Any suggestions or ideas would be greatly appreciated!

That would explain your problem! If you have a backup then see if it's on your backup. Otherwise, you will need to restore it from your installer DVD using Pacifist:
How Restore Deleted or Missing OS X Components
A few of the basic OS X installed applications can be restored from the Optional Installs installer located in the Optional installs folder on your Installer DVD. However, if what you need is not there then follow the instructions below.
How to Use Pacifist to Restore Deleted or Missing OS X Components
Insert the OS X Installer DVD into the optical drive. Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items. Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
defaults write com.apple.finder AppleShowAllFiles Yes Press RETURN.
To turn off the display of invisible files repeat the above command substituting No for Yes.
The install packages are located in the /System/Installation/ folder on the DVD.
Download the shareware utility Pacifist from VersionTracker or MacUpdate. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
A. Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
B. Click on “Open Package ....” and navigate to package desired and click “Open” in the open/save window.....proceed to step 7.
C. Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go to Folder. In the path field enter or paste ....
/Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.
• Click on the "Go" button ..... • Drag a .pkg to Pacifist..... proceed to step 7.
The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
D. Insert your Mac OS X install disk 1 .... and open Pacifist.
1. In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
2b. or click the “Find” icon in the Pacifist window and type the name of the software you need.
3. In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
4. On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
>5. Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
20 files were scanned. 20 of 20 files were present on the hard disk. 0 of 20 files had file permissions that did not match those specified in the package. 0 of 20 files had checksums that did not match those specified in the package.
6. Click “close”. Go to step 7.
Extract or Install........
7. In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
8. If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
9. In the next dialog, click “Extract”.
10. If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
11. Type in your password, click “OK”
Pacifist will begin to extract files.
12. In steps 8/10ß.... you also have the choice to “cancel”
Notes.....
Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
Stop Leave original alone Update ..... Default selection Replace .... Replace option should only be used on full install packages

Problem mapping USB external drive connected to Airport Extreme on my PC

I am having a problem mapping my USB external drive in my PC running WIndows Vista. Here is what I have so far:
USB External Drive connected to my AirPort Extreme which is connected to my Century Link modem/router.
I have installed the USB drive using the Airport Utility. In the Disks section the Enable File Sharing is checked, Secure Shared Disks is set to With a Disk Password, I have entered the password in the next 2 rows, and finally AirPort Disks Gues Access is set to Not Allowed. The section below named These Settings Configure Windows File Sharing is empty. Am I supposed to put something here?
I was also told I need to map the drive in my PC, but when I go to do that via the Computer and the Map Network Drive, I get stuck where it asks me to enter a folder name. I read many of the posts which tell me I need to enter among other things the disk's ip address, but I am unable to find it anywhere. Where do I find what to put here?
Can someone please help this frustrated user?

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

WD Essential 500GB USB External Drive Not Recognized

I have a WD USB External Drive which was formatted for use with my old windows based PC. Bought iMac G5 and at first recognized but now does not and when i run disk verify in dissk utility get following error message:
Verifying volume “My Book”
** /dev/disk1s1
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
Unable to read directory (Input/output error)
Error: The underlying task reported failure on exit
1 non HFS volume checked
Volume needs repair
Get same message when I try to repair, any help will be greatly appreciated

Hello! I would try hooking it back up to a pc and run the repair function from there or erase the drive as Mac format and start all over. Tom

Imovie9, 13"macbook aluminum and USB external drive

Similar Messages

Maybe you are looking for