IMovie9 Publishing says its posted but not on Youtube

i published a video yesterday with iMovie 9 on youtube and it worked. I have published 40+ videos to youtube with iMovie9 with no issues until yesterday evening i tried posting a 3 times for a 3 minute movie & one day later iMovie states its published and I click link the video and is not on youtube evening

I wanted to clarify what I wrote: i published a video Thursday with iMovie 9 on youtube and it worked. I have published 40+ videos to youtube with iMovie9 with no issues until yesterday evening i tried posting another video 3 different times over the next entire day for a 3 minute movie & each time iMovie states its published and asks if i want to "Tell a Friend" or "View" and I click link for the video and it is still not on youtube.

Similar Messages

Issue with ARD 3.0 not pushing out Installs, Says its installing but not

Issue with ARD 3.0 not pushing out Installs, Says its installing but not
Has anyone seen this. It seems to happen with ARD 3, have not seen this in ARD 2.
I go to the Install Packages on Target Computers, put in: 10.4.7 Combo (for the correct CPU, PPC or Intel), security updates, QT 7.1.2, etc.
Push it to Macs I can connect to, observe and control.
The progress bar copies the files (in some instances it does not) and then it just hangs there, bar does not move, Installs never finish, not good, very odd.

Is it the same clients that have the problem every time? Are those clients doing anything cpu intensive? Have you tried rebooting the affected clients?
Maybe try a smaller package on those clients.

SAP MMC Says Dispatcher running but not connected to message server

I installed the ABAP Stack Sneak Preview Netweaver.I see all the relevant NSP entries in my Services file.But when i disconnect my internet I see in SAP MMC that Disptacher says its running but not connected Message Server(turns yellow) and also the SAP gets logged off. Is Internet connection required for running NSP(ABAP System SID)??
If I want to get rid of this internet dependency what settings i need to change ??
My current Message trace file says as follows..
Trace File of Message Server
trc file: "dev_ms", trc level: 1, release: "640"
[Thr 4516] Mon Sep 26 21:51:06 2005
[Thr 4516] systemid   560 (PC with Windows NT)
[Thr 4516] relno      6400
[Thr 4516] patchlevel 0
[Thr 4516] patchno    43
[Thr 4516] intno      20020600
[Thr 4516] pid        4512
[Thr 4516] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4512) [msxxserv.c   1661]
[Thr 4516] Mon Sep 26 21:51:07 2005
[Thr 4516] MsHttpInit: full qualified hostname = sai
[Thr 4516] HTTP logging is switch off
[Thr 4516] set HTTP state to LISTEN
[Thr 4516] *** I listen to port sapmsNSP (3600) ***
[Thr 4516] *** HTTP port 8100 state LISTEN ***
[Thr 4516] CUSTOMER KEY: >K0201639721<
[Thr 4516] Mon Sep 26 21:52:46 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 4516] Mon Sep 26 21:52:50 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
Looking for your valuable solutions.. Will definitely reward good points if gets solved
Thanks
Sreeni.

There is now also a Weblog about https://weblogs.sdn.sap.com/pub/wlg/2479 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken].
Regards
Gregor

TS1398 Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automaticall

Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
Thank You.

See:
Can't connect to the iTunes Store

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I'm having similar issues with my phone. I got my first iPhone recently, only had an iPod touch gen4 for a little over a year. Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas. When I got home on the evening of January 11, my phone would not connect the router anymore. I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting. That laste for a few minutes and then wouldn't work anymore. I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router. When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there. Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
Hope Apple fixes this problem soon..............

I downloaded my first book on iBooks and says its downloaded but its not there

I downloaded my first book on iBooks and it says its downloaded but its not in my library.

Did you check on the device you downloaded it on? Did you actually purchase and download the book on your iPad? If so, did you check in the iBooks app? If you downloaded the book on iTunes, did you sync your iPad using iTunes and then check the iBooks app?
You did purchase the iBook at the Apple iBook Store, right?

HT4906 I have just downloaded Mountain Lion but my iPhoto app cannot be launched as it says the original app cant be found. It takes me to where is says its located but its not there. What to do?

I have just downloaded Mountain Lion but my iPhoto app cannot be launched as it says the original app cant be found. It takes me to where is says its located but its not there. What to do?

Reinstall it?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Internet says its connected but its not

Internet says its connected but when safari opens it tells me it's not connected

Turn off the router.
Turn it back on and wait until all the lights are lit up.
Restart the computer.
Hope this helps.

Its says its downloading but its not moving further. its seems like its not downloading

its says its downloading but its not moving further. its seems like its not downloading

It takes a while to get going. If you see no movement for about half an hour restart and it should begin the DL.
YOu should at least see a loading bar under your Launchpad icon.

I installed kodak all in one printer but its not working, it says its ready but its not printing

I installed a kodak all in one printer 5250 and it says its ready but won'nt print the test page. what can I do?

When you go to System Preferences > Printing, is the new printer found there?

HT2638 I click rebuild iphoto and it says its loading but its not working!

I click rebuild iphoto and it says its loading but i dont think is working. i have left it for a long time to load and it just keeps loading! HELP!!!

If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

I imported a CD audio book into iTunes 11, searching says its there, but I cannot find it. It does appear in my iTunes music folder.

Using Audiobook builder I imported an audiobook CD into iTunes 11. I can see it in my iTunes music folder on the hard drive, searching in iTunes 11 says its there, but in either the albums or list, it does not appear. I have successfully imported many CDs using Audiobook Builder before, but with this particulary book I have this problem.
Any ideas anyone ?

The missing file thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
At guess you've used a different profile name. Files inside the media folder have survied the transfer, but those outside are expected to be on the same absolute file paths, but no longer are.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
tt2

I was trying to install premier pro it says its installed but it isn't and i can't reinstall it

i was trying to install premier pro it says its installed but it isn't and i can't reinstall it

Thanks for the added information, the screenshot did not get posted but that is ok.
These steps should resolve the issue on your Mac:
Double-click on the link for Uninstall Adobe Premiere Pro CS6 at Applications > Utilities > Adobe Installers.
Check if the Install link is now available in the Adobe Application Manager.
If not, install and run the Adobe Cleaner Tool to remove any traces of Premiere Pro. It can be downloaded from here: http://www.adobe.com/support/contact/cscleanertool.html.
The Install link should now be available in the Adobe Application Manager.

How can i check for posted but not yet commited changes in a form

Dears
I make changes programmatically in a form then i post it using (Post built in).
If the user exits the form, i make check for any changes in the form to commit it using the system variable :system.form_status
Unfortunately the value of this system variable is 'Query' not 'Changed' because of using the post built in.
Is ther another system variable ( or any another way ) that check for posted but not yet commited changes in the form ?
Thanks a lot
Mostafa Abolaynain

I had faced similar situation. Using of package variable which identifies, what is the user's latest action.
This is just a workaround.
Capture what the user has performed into a variable say, PKG_VAR.ACTION,
This will be assigned values like List L, and Create C, Update U and Saved S.
If commit is executed,assing the status S to the variable.
So while closing,
IF :system.form_status = 'CHANGED' or PKG_VAR.ACTION in ('C','U') THEN
-- validate the data, n perform commit.
else
-- just close the form.
end if;
Regards
Deepz : )

My mac book wont recognize my ipod. My Ipod will make the initial connected sound saying its charging but otherwise theres no way of finding the Ipod anywhere on the computer or Itunes.

My mac book wont recognize my ipod. My Ipod will make the initial connected sound saying its charging but otherwise theres no way of finding the Ipod anywhere on the computer or Itunes. Please help with anyway I can get the Ipod recognized so I can download music from Itunes to my Ipod. Thanks in advance.

Hello xerxes.nashion,
It sounds like your iPod is not recognized by iTunes or your MacBook Pro. I recommend following the steps in the article below for an issue like this:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/TS1410
Thank you for using Apple Support Communities.
Best,
Sheila M.

IMovie9 Publishing says its posted but not on Youtube

Similar Messages

Maybe you are looking for