Imovie9 will not export with sound! Help!

Hi,
I have been using imovie to edit a movie for the last couple of months and have been exporting it with no problems. Yesterday, I exported a new edit and for some reason, half way through the movie the sound cuts out. On the other edit I exported the sound is distorted and sounds as though a computer is struggling. The only reason I can think of for this is that I have imported new footage to work with. However, I have shot with the same camera, same sound settings etc. so i don't understand why it is affecting it.
I have tried a few things, like doing an imovie update. Mucking around with the sound settings when exporting and exporting again (3 times) to different places (externals). To no avail. Can someone please help!??!?!

Hi Rev Dave
Q: What is the best way to get a copy of this with sound on DVD? Why won't it export with sound? How do I get it in iDVD 6.03?
have you tried:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.products.htm
or
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
SDMacuser

Similar Messages

  • My new ipod nano will not synch with iTunes - help? ipod nano sw v1.0.2; iTunes sw v11.0.1; mac os x v10.7.4

    My new ipod nano will not synch with iTunes - help? ipod nano sw v1.0.2; iTunes sw v11.0.1; mac os x v10.7.4

    UPDATE
    i was able to connect and synced songs yesterday.
    but when i tried it again today. i cant connect again.
    i tried to disconnect and reconnect million times and i even dropped
    my iPOD and now it has some scratch and i hate it.

  • Mail attachments video will not play with sound

    Since installing ML, My email video attachments that I recive do not play any sound.  The video component works fine, loads reasonably quickly but has no sound.  I have check my speaker settings and sound plays on other applications, eg itunes etc.  Does anyone know how to fix this?
    Thanks

    Contact iTS support and either get a new download, or a refund.
    http://www.apple.com/support/itunes/store/browser/

  • Sound will not export with video in only 3 scenes, but exports fine in other scenes for the most part. In the last scene the audio does export to video, but the this scene is a video that I imported with rolling credits. the rolling credits do not appear

    The above title should explain my problem, I have been working on this for a while and I am getting exhausted

    Why not post this in the iMove forum area?
    http://discussions.apple.com/category.jspa?categoryID=141

  • PC Will Not Boot With Sound Blaster Live Va

    My PC won't boot with the SBLV card but when i put the SB Vibra 28 card back in it will boot. The card dosen't look burnt out anywhere,the sound card could have **bleep** itself,any ideas.also i have another problem i can't get the SB Vibra 28 drivers to work its there in the device manager but it has a conflict due to the drivers not installing. It comes up
    with this error (The SBPCI interrupt has been routed incorrectly by the system audio pci
    inacti've.Use automatic settings in the device manager.
    Any Ideas
    Cheers
    Pentium 233mmx
    64mb ram
    win 98SE

    I have the same message error.
    "The SBPCI Interrupt has been routed incorrectly by the system. AudioPCI Inacti've. Use Automatic setting in the Device Manager."
    I have a Compaq computer and win 98. Ever since we moved, the speakers stopped working.
    I tried going thru system properties and Device manager...it shows that the device is working properly. And the Automatic setting box was already checked. I bought new speakers thinking the speakers were bad but I still get no sound. I followed all the steps for Sound Troubleshooting. I did notice when I went to control panel, multimedia, devices, audio...one of the sound cards said: driver is enabled but inacti've due to an unknown problem. But it didn't tell me how to fix the problem?
    I don't know how to get the sound.
    Can someone help me? I really don't know anything about the computers.
    Thanks in advance.

  • Iphone 3gs will not sync with computer help !!

    Okay, I've tried everything I read on the internet and nothing has worked. I even erased the data and settings off it because it wouldnt sync with my Itunes. Now its telling me to connect it to Itunes but I cant? Also I activated it off a different computer because I was having trouble installing Itunes, now that I finally have it, it doesnt work. I'm going out of my mind here can someone PLEASE help me ???

    Oh well no not that, its just that it does not appear on the Itunes left side bar. I'm re-istalling Itunes now but I don't think it would make much difference because I only installed it yesterday so its not that its an old version. Nope no error message or anything just doesnt show up. When I go onto the start menu and click computer the Iphone shows up there.

  • My ipod touch will not sync with itunes help me please

    Can someone help me figure out how to sync my ipod touch with itunes. Thanks

    Hi Fights,
    Can you tell us more about your issue?
    Are you using a mac or pc? Do you know if your computer has usb 2.0 ? or better?
    Do you have itunes installed on the computer? Have you checked to make sure itunes is up to date? Dose your computer recongise the iPod Touch when you connec it to the computer? if so, what happens when you connect it?
    I'm trying to figure out where your having trouble with syncing.

  • I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

    I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

    HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/

  • Macbook pro will not pair with Vizio sound bar.

    Macbook will not pair with Vizio sound bar. It has paired and worked fine in the past. in the menu bar at the top of the screen it says it is connected but it is not. when I open the bluetooth preferences and try to pair it says pairing failed. any help would be great. thanks.

    Me too. sigh
    All was well until this afternoon, when I swapped out the batteries on my trusty old Microsoft IntelliMouse Explorer for Bluetooth, which has worked flawlessly for me for a few years now. After I put new batteries in, my MBP wouldn't recognize it. I went through the Bluetooth Setup Assistant, and it "saw" the mouse and properly listed it as "Microsoft Mouse". I hit "continue", of course, and the Assistant said "Pairing with your Bluetooth mouse". It got as far as "Connection established" (and I saw the mouse appear in the Bluetooth preference pane", but then I got the dreaded red words: "The pairing attempt was unsuccessful. Make sure your mouse is in range of this computer, turned on and "discoverable." Etc., etc. I made sure of all of those things and tried again, many times, with the same failure every time. I tried different batteries, rebooted the Mac, and so on. No luck.
    Figuring my mouse was dead, I went out and bought a Kensington Slimblade Bluetooth Presenter Mouse, brand new, never been paired with anything. Same problem!
    Also, I can no longer get my Palm Treo 650 to sync via Bluetooth. It used to be a little flaky (often complained that the port was in use by another application), but rebooting the Treo always solved that. Now, it doesn't.
    One trusty old mouse suddenly stops pairing, one brand-new one refuses to pair, smartphone won't sync any more. I haven't installed any system updates or anything else since the Microsoft mouse worked. The only weird thing going on is that I'm having massive network connectivity issues with my broadband connection (probably a flaky cable modem), and a couple of days ago I bought a new Airport Extreme a/b/g/n wireless router, which is at the other end of the house from my computer and now-defunct mice.
    Very bizarre. Can the Bluetooth chip or antenna in a MacBook Pro burn out or otherwise fail?
    Puzzled and frustrated,
    :ian

  • I am trying to export a slide show from iPhoto with music from iTunes. it will not export the music file because i have not enabled iTunes plus. how do i do this?

    i am trying to export a slideshow from iphoto using a song from itunes. an error message comes up and say it will not export the song because itunes plus has not been enabled. how do i do that?

    It sounds like you tune is an .m4p file - p=protected and has DRM.
    Previously you could get the + version which was a .m4a file with no protection/DRM.
    The + option has been replaced with iTunes Match - $24.99 a year.
    A better option if you have a .m4p file would be to repurchase the .m4a version from the iTS unless you want to update your entire library with iTunes match.
    MJ

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • HT6030 I would like to send an e-mail to a group of people I have the group created, but when I drag it to bcc or to it will not attach. can anymon help me with this?

    Help I would like to send an e-mail to a group of people,  I have the group created, but when I drag it to bcc or to- it will not attach. can anymon help me with this?

    In a new email message window start to type the name of the Group you have in Contacts/Address Book in the 'To' field - it should self-complete when it recognises the name.
    (Note: this only works with 'normal' Groups and not Smart 'Groups').

  • When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

    when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

    Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

  • My Ipod will not sync with Itunes - PLEASE HELP

    I have a bunch of songs on my ipod that I have from my previous computer and they will not sync with Itunes on my new computer. I have authorized the computer, I have also selected the "transfer purchases from ipod" option, I have spent the last day reading through FAQs but have found no solution. How do I fix the problem? Thanks in advance for your help.

    The transfer purchases option only works with music purchased from iTunes and you don't say if this is the case.
    Here's some other option for Windows users.
    First, try this method which works on some Windows PCs.
    Enable your iPod for disk use.
    See: iPod Disk Use.
    Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
    Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
    Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
    The music files should transfer to your iTunes.
    If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
    Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
    Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
    One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Another free program is Pod Player.

  • My ipod 5.1.1 (9B206) will not sync with new Itunes version 12.0.1.26. Can anyone help

    My ipod touch 3rd generation OS  5.1.1 (9B206) will not sync with new Itunes version 12.0.1.26. Can anyone help

    What exactly happens when you try to sync?
    Does iTunes see the iPod?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod
    If iTunes does not see the iPod:
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

Maybe you are looking for

  • FRM-40039 error on Unix

    I'm getting this error in the application server in unix "FRM 40039 Cannot attach library calendar90". The same form works fine in windows. I searched for solutions in this forum and tried everything but it still gives me the error. I have compiled t

  • I need to transferblack berry contacts to iphone Will apple do this for me for a fee

    I need to transfer black berry contacts to iphone can i pay apple to do this for me?

  • Cubes locked in terminated change runs

    Hi guys, Couple of cubes are locked in terminated change run......... how do i resolve this as there are no locks set form them in sm12 or db01 what is the way to go.......... Thanks, Your help will be rightly appreciated

  • 4.1 setup for x

    I have had my X-Fi Extreme Music for a few days and I am very pleased with the improvement over my Audigy, particularly the much lower noise levels. I am running the card with analog out to two pairs of speakers powered with one stereo amplifier each

  • Help me !!!!!! set Arguments property for block based on store procedures

    hi i build a block based on storeprocedures ,if i set the Query Data Source Arguments property in design time with a value my form will work, but i need to set this property programetically and in runtime, if there is any built_in or other ways ,plea