IMovies see Sony MiniDV, FCP doesn't

Hi,
I have a Sony miniDV camcorder with firewire. When I hook it up IMovies, it is very happy and I can capture. But on FCP I cannot get any deck although i use non-controllable device option.
Any ideas?
Many thanks

Try using the Easy Setup DV PAL or NTSC (your video standard) before starting your Project.
Make sure the camera is in VCR mode before capturing.
Al

Similar Messages

Vista: 1.3 Downloader Doesn't See Sony a700 .ARW's; Odd Mouse Behavior

On my Vista system,the LR 1.3 downloader (now "Adobe Photodownloader 3.0 Component") doesn't see Sony a700 .ARW's when I choose Camera Or Card Reader as the source. I don't know about a100 .ARW's. The downloader for 1.2 didn't recognize either. I can still import them in place once I have them downloaded using the Vista Photo Gallery.
A new problem is that when I scroll through a group of images using the mouse scroll wheel the library loupe preview updates as before but the thumbnail doesn't shift until the histogram appears. The left and right arrows work properly.
The device manager shows the mouse (a Gateway branded optical mouse) as a "HID-compliant mouse". No updates to the mouse appear to be available.

If I use the "Choose Files" and "Copy To A New Location" options I can import directly into LR. I prefer to just keep using the Photo Gallery downloader and then import in place until the LR downloader is fully compatible. The annoyance for me is that there is now a lag in changing the active photo on the film strip in Library Loupe view when using the scroll wheel.

HT2498 I connected a Sony miniDV camcorder ....

I connected a Sony miniDV camcorder on firewire port of a iMac late 2009 and Mavericks 10.9.2. Result: the iMac don't see the camera (I tested it whit iMovie 9 and 10).
The same connection whit Snow Leopard works fine. Why ??

Hi
May be You find help in my old list ?
NO CAMERA or A/D-box
Cable
Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
Test another FW-Cable very often the problem maker.
Camera
Test Your Camera on another Mac so that DV-in still works OK
Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
Some Cameras has a Menu where You must select DV-out to get it to work
Camera connected to "charger" (mains adaptor) - not just on battery
Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
Is the dip-switches set right ?
Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
Try resetting it
Connections
Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
Does Your Mac have a FireWire Port
White MacBooks - don't
MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
FileVault is off ? (hopefully)
Screen Saver - OFF
Energy Saver - OFF
Using WHAT versions ? .
Mac OS - X.5.4 ?
QuickTime version ? (This is the heart in both iMovie and FinalCut)
iMovie’08 (7.1.?), 09 or 11 ?
iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
FileVault - Secure that it’s turned off
Network storage - DOESN’T WORK
Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
USB hard disk
Network storage
File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

OneStep asking for firewire connection-my Sony HDR-SR11 doesn't have firewire port. Help.

The question says it all. I wanted to use OneStep to move all my home movies to a DVD, but iDVD is asking me to connect via firewire and my video camera-a Sony HDR-SR11-doesn't have a firewire port. I don't want to go through the extra step of importing into imovie because that will take a ton of time. Any other suggestions?

Only 2 options that come to mind. The first is to do a one step from a movie (as opposed to a one step from from the camera) within the file menu in iDvd. And yes, you will have to export first from the video editing app (iMovie / FCP) prior to using iDvd's One Step. No way to avoid this when using apple's iLife.
The other option is to use a hardware approach; something like Sony's Dvdirect that requires no PC and burns directly to DvD-R at the touch of one button. Menus aren't as nice as iDvd's but the quality is very good. Try ebay if this option appeals to you. I picked up one for about the same price as iLife software.
Hope this helps but if not just come on back.

IMovie and Sony Camcorders

I recently purchased a Sony Camcorder - Tape based MiniDV - DCR-HC62. When I plug in the camcorder using a Firewire cable, iMovie 08 does not see the camcorder. The hardware overview does show the camcorder being plugged in using the Firewire port. Has anyone else had this problem with this camcorder model or similar models such as the DCR-HC54/HC52 ?

Welcome to Apple iMovie discussions. I am not sure why your cam is not recognized by iMovie 08. MiniDV cams should work easily with any version of iMovie. Do you have the cam set on "playback"? Some cams have a PC setting which won't allow capture of the video.
You might try the free download of iMovie HD6, which, in the opinion of many, is still a better programme than the 08 version. Go here for that.
http://www.apple.com/support/downloads/imovieHD6.html

Sony miniDV camera not being recognized by emac

Can somebody help? My sony miniDV DCR-TRV11E has worked fine with imovie 4 with a firewire connection. Now when I open imovie it tells me no camera is connected. Also, it's not appearing in the system profiler. Thinking it was a dodgy firewire cable I bought a new one - but no change. Have done the firewire reset by turning computer off and pulling all plugs out of socket, still no change. Any help would be appreciated.
Emac 1.25GHz PowerPC G4 Mac OS X (10.3.9)

Thank you for your help Lennart.
I discovered the problem is the firewire port on the camera. Tried my old cable with my brother's camera and it worked fine. It still didn't show up in the system profiler though. Am now hoping it's not going to cost the earth to be repaired.
Emac 1.25GHz PowerPC G4 Mac OS X (10.3.9)

Sony miniDV versus Canon miniDV

I've read a few times on this forum that Sony miniDV cameras will be recognized by iMovie 08 even if they are the "second" firewire device attached to a Mac. In other words, you can have an external firewire hard drive attached and then attach your Sony camera and it will be recognized.
Then, I've read where a Canon miniDV camera will not behave this way. With a Canon camera, you must detach all other firewire devices and have only the Canon camera as the single firewire device attached to you Mac in order for the Canon miniDV camera to be recognized.
Does anyone know the real story here or have any actual experience with this? I would like to buy a new Canon camera, but I have an external firewire drive attached and that is where my Events are stored. So, obviously detaching my Events firewire drive isn't desirable.
I presently have an old Sony Digital8 firewire camera and it works without detaching my firewire drive.
I appreciate you help and advice.

I have a Canon HV30 attached with a firewire& my time machine also attached with the other firewire port. IMovie recognizes the HV 30 & so does FCE. Hope that help. bjt

EMac and Sony MiniDV

Hi there,
Can anyone tell me why my eMac won't find the firewire connected (either port) Sony MiniDV Handycam?
I connect it all as described (MiniDV set to playback - connected through firewire cable to eMac) and nothing...
The screen on the Handycam blinks every 3 seconds and shows the DV in signal (I actually want DV out) - but nothing else.
It all works fine if I connect it to my IBM Notebook via another cable. Am I missing a setting? Or could my cable / firewire ports be cactus?
Cheers

Do you have any other Firewire devices? To confirm the impression I got from your post, you're attempting to connect directly to the eMac, and not through a Firewire hub, right?
With nothing attached to the Firewire ports, open System Profiler (in Applications/ Utilities) and check that the Firewire bus itself shows up. If it doesn't, reset the eMac's Firewire bus triple fuses (they can be tripped and latched by momentary power glitches) by removing all peripherals other than the Apple USB keyboard and mouse, then removing the power cord from the side of the eMac (to remove the trickle current drawn by modern electronics even when nominally off) and waiting 15+ minutes. Then reattach the power cord only and start up the Mac. Check System Profiler again and confirm that the Firewire bus is recognized. Reattach peripherals (the MiniDV camera) one at a time, checking System Profiler after each to confirm the addition is recognized.
Let's not overlook the too-obvious either; check the Finder's preferences and make sure the "show these items on the desktop" boxes are checked.

Is capturing in iMovie before transfer to FCP affect clip quality?

Capturing in iMovie detects all the start/stops. Then, importing in FCP is a fast and easy way to get all start/stops. But, does the resulting video quality just as good as if the capturing had been done entirely in FCP ?
jcjber
PowerBook 12" Mac OS X (10.4.6)

#20 Using iMovie to Capture for FCP edit
Shane's Stock Answer #20:
iMovie handles the media differently from FCP, specifically where audio is concerned. So it is not a recommended workflow. Here's why...
iMovie captures using DV Stream (.dv) standard which does not use timecode. That is a big disadvantage over the way that FCP captures in that you can't go back and recapture the material at a later date if you need to revisit a project.
The DV/NTSC specification (the one FCP uses) also calls for seperate tracks for audio and video, even if you capture it as one clip. iMovie' DV stream format is muxed audio and video, which means that they are tied together (I can't get into specifics because I ain't no engineer or programmer). FCP is a bit more demanding and captures the seperate audio/video tracks, either in a single media file or as seperate video and audio files. With FCP you could capture video only or audio only because each is defined by the DV specs. while with iMovie you can't.
Also, if you drop the iMovie footage into the timeline, your will get the RED render bar forcing you to render the footage in order to see it...
Shane

IPhoto 08 is gone...can see the icon but doesn't open. Any suggestions?

I was working on getting my Time Capsule to backup my MacBook and erased everything on there. When I restarted and got the time capsule to work i couldn't open my Iphoto anymore and cannot open any new photos that I download..
If I click on the icon it bounces then stops and nothing happens. When i search my applications folder the iphoto application is not there. When i search the "myname"macbook drive>iPhoto I can see the iphoto app. (doesn't open, crashes immediately), the contents folder (the plug-ins disabled and resources disabled items do not open)
Any help would be appreciated.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*What's the plist file?*
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
If that doesn't help:
Post the Crash Log.
It's at Home / Library / Logs / Crash-Reporter / iphoto.crash.log
Double click on the file and it will open in the Console. Copy and Paste it in here.
Regards
TD

How can I import an iMovie HD file into FCP?

I did a rough cut of a short film in iMovie HD, and now I need for my editor to be able to access it and hopefully generate an EDL. Even opening it in a newer version of iMovie throws out everything but the :30 title sequence I built at the beginning.

You can't access iMovie project data in FCP.
Apple gave iMovie '08 users the possibility to re-download a copy of iMovie HD. That offer was discontinued in 2009
The only possibility now is to go back to the source tapes and eye match to your rough cut.

Im trying to place an arrow into iMovie, but picture in picture doesn't appear, replace or insert comes up instead?

Im trying to place an arrow into iMovie, but picture in picture doesn't appear, replace or insert comes up instead? Im trying to make a highlight video and I cant place an arrow into picture on picture, I used to be able to untill I updated my IOS.
Any help would be great! thanks.

Make sure that you have enabled (checked) Advanced Tools in the General tab under the iMovie menu item "iMovie>Preferences".
Also, a Picture-in-Picture (PIP) can be inserted only into clips in a project - not clips in an Event.
John

Connecting Sony MiniDV via firewire to macbook with i-movie 08

I have 2 Sony MiniDv recorders, HC19E, 109E & neither will connect using a USB to USB or firewire to firewire. The computer does not even recognize them. Every time i press import from camcorder it brings up me in i-sight (live).
THIS IS DRIVING ME NUTS!!!
Any help would be much appreciated!

for usage of iMHD, you need a firewire connection (Sony lingo: iLink)
set camera to Play
in iM, you should now be allowed to select the iSight or camcorder as input device..

IMovie and Sony camera can connect, but nothing imports

My iMovie and Sony HD camera can connect fine...I can control my camera from imovie, but when i click import, it plays (plays on camera and timer on imovie starts) but the screen remains blue and no video is actually imported.

Did you try Sue's excellent suggestion of the Garage band trick anyway?
Also, try deleting iMovie's preference file...the plist found in YourUserName->Library->preferences->com.apple.iMovieplist. Close iMovie, trash the plist. iMovie will create another one when you launch iMovie again.
Do you have the camcorder plugged directly into your computer's Firewire port? Some camcorders don't work properly if they are connected into another device. And, just to be sure, you do have the camcorder set to VTR, right?

IMovie 10.0.1: Stabilization doesn't work. I have tried several times, it just grays out. Also, fonts, font size, color of title not working. What's the skinny?

IMovie 10.0.1: Stabilization doesn't work. I have tried several times, it just grays out. Also, fonts, font size, color of title not working. What's the skinny?

PROBLEM SOLVED!
I went to my device manager on my Windows 7 PC and found the Bonjour service in my Services and Applications section. I set it to manual and BANG iTunes started working like it's supposed to.
Unfortunately, I let my IPad get stolen on 17 Jan so I'll probably wait until after April to replace it with an IPAD 2!

IMovies see Sony MiniDV, FCP doesn't

Similar Messages

Maybe you are looking for