Imovvie won't send project to Final Cut X

I am having difficulty sending my project to from latest version of Imovie to latest version Final Cut X. Imac 27 late 2009 running on Mavericks also fully updated (march 2 2014). I have several libraries on three different firewire discs. All libraries are created from upgrading from older versions.
When I run the same thing on my MacPro (no external drives) everthing runs fine.
Any ideas on what to do??

Strange. (they are not trailers are they - it doesn't work with trailers).
It works for me with projects on external firewire drives. When you say "In Imovie it looks like the file is created" What do you see?
When I have sent projects to FCP nothing visibly happens in iMovie 10. I presume that FCP reads the existing iMovie project file. In fact I think it deosn't even copy the media but simply hard-links the existing media.
Geoff.

Similar Messages

Mavericks' iMovie won't export project to Final Cut Pro

Upon updating to Mavericks and its accompanying versions of iLife, I do not see where the option in iMovie to open a project in Final Cut Pro X is.
Likewise, attempting to import an iMovie project from Final Cut only creates a blank project with the iMovie project name and then crashes Final Cut Pro.
Is there any way to regain this feature?

AppleMan1958 wrote:
If you are on iMovie 10.0.2, use FILE/SEND MOVIE TO FINAL CUT PRO. If you are not on 10.0.2, let us know what you are on.
This sends the iMovie to FCPX 10.1. If you are not on FCPX 10.1, it will not work.
I recently tried this with one of my iMovie 10 projects and it all worked perfectly. Nothing changed in Final Cut Pro X (unlike when using the previous method with iMovie '11). All clips, titles, transitions, audio tracks, edit points and so forth were intact. I was then able to add further embellishments in FCP X. It's a delight using FCP X, given its flexibility and greatly expanded feature set compared to iMovie 10.
Here's the iMovie 10 Help topic:
http://help.apple.com/imovie/mac/10.0/#movcbf7e2a3f
John
PS Compound clips are magic (when needed)!
Message was edited by: John Cogdell - Added PS

Problem sending timeline from Final Cut to a Soundtrack Pro Multitrack Project

Hello,
Thank you in advance for reading. I am having trouble sending a timeline from Final Cut to a Soundtrack Pro Multitrack Project. Final Cut makes a new Soundtrack Pro project file just fine and opens Soundtrack Pro as it's supposed to, but the project in Soundtrack Pro only has a portion of my audio tracks. I've tried sending by control clicking the sequence in the browser and selecting 'Send to Soundtrack Pro Multitrack Project' as well as highlighting my entire timeline and doing the same. Both result in the same Soundtrack Pro proejct with about 1/3 of my total 48 audio tracks (lots of sound FX).
I'm using Final Cut 7.0.2 and Soundtrack Pro 3.0.1 My computer is a Macbook Pro running OS 10.6.8, 2.26 ghz intel core 2 duo, 4 gb ram.
Any suggestions (or workarounds, if it comes to that) anyone has will be greatly appreciated.
Thanks again, Gabe

Try building the project to your desktop and then open the Video_TS in the Mac DVD player application.
How does it play/sound? This application is the best way to see and hear how your burned DVD should play vs. just using simulator and burning.
Just to clarify- are you taking your FC QT file into Compressor and creating a MPG-2 and AC3 file or are you bringing your FC QT directly into DSP?
What codec are you exporting from FC? ProRes422, DV, H264?
Open the FC QT in QT and apple+I to see this.
What does it say for audio?

Failed to send my project in final cut pro to compressor

I tried to send my project in final cut pro to compressor but when I go to file then see send to compressor it will not let me click on "send to compressor". I checked but none of my files are missing or anything and the project is only 4 minutes long. This has happened to me once before and it completely crashed my computer. I had to start out fresh which was a horrible process. CAN SOMEBODY PLEASE HELP?! (URGENT)What might I have done wrong that this happens? In the picture below, this happens and I have no idea why that is.

I suspect it's a FCP X issue rather than a Compressor issue.
Will FCP export a master file? Make a short section with the range tool and find out.
Tri reseting the zoo's preferences. Hold down the option and command keys when you launch to reset.
Russ

Problems rendering motion projects in Final Cut.

When I import a motion project into final cut, and attempt to render it once it's on the timeline, i just get a black screen.

Here's an inelegant workaround I've used when having these kinds of troubles:
In your FCP timeline, create a slug the exact duration of the Motion project you're trying to import. Then control click on that slug, and choose Send To>Motion Project. It will launch Motion, with all the correct project properties assigned to the Motion file. Copy all your work from the first Motion project (the one that renders black), and paste it into this new Motion file that FCP has created. Hit Save in Motion. Then try rendering again in FCP. (Also, in FCP's Canvas, make sure Image is selected in the upper rightmost dropdown, or you might just get black.)

When sending job from Final Cut Pro to Compressor using local QCluster

When sending job from Final Cut Pro to Compressor by way of Share and using the local QCluster, the audio renders, but the video errors out saying something along the lines of Can not locate file.
If I use 'This Computer' it works fine.
What gives?
Fresh install of OS and FCS.
Thanks!

I'm just learning the intricacies of Compressor and Qmaster myself, but I have learned that when you use Qmaster you can not share directly from FCP. You must export a Quicktime movie (reference movie seems to be fine) and input that to Compressor. This is only an issue when using Qmaster, as you've seen.

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p but I did everything the same as the ones that did not. ***? Any ideas?

I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p by "accident" but I did everything the same as the ones that did not. Same camera/settings (shot in 60i). I didn't really care cause I had to get some stuff done, but now I know I "can" dp them in HD but can't figure why the one went up to YT in full HD (and made a copy in my movies folder. That one project acted totally different than the other 5 but I didn't change anything. Can't get it to work again. ***? Any ideas?

No problem! If you're worried about more complicated edits (which in all honesty, should work no matter how many clips you select or how many effects are attached to them), you can always compound a clip first, and then copy it over after if you're afraid of lots of track clutter getting in the way. Not sure if they would break apart afterwards though if you wanted them to.

I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?

Hello everyone
I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
Hope you guys can help me!

You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.

Transfer clips and projects from final cut pro x trial to final cut pro x

Just bought the final version of Final Cut Pro X and cannot transfer my existing clips and projects from Final Cut Pro X Trial.

RRight-click on your library, select Open With and choose FCP.

How to import project from Final cut pro 7 to X ?

how to import project from Final Cut Pro 7 to X ?

please tell me if FCP 7can create any kind of file that FCP X can read ?
I can read FCP 7 .mov file with QuickTime, but not with FCP X ? what can I do ?
Sould I use a Premiere on PC to make files compatibles in between 2 apple Softwares ?
I have a lot a files that have been created with FCP 7 and I just buy FCP X , so I am Stuck !!!
thank you in advance

Command to Export project as Final Cut Pro XML from jsx script

Hi All,
Can somebody get me the command to export the project as final cut pro xml from jsx script.
I was using the extension builder script earlier for cs6 panel development, so we were using pjct.exportFinalCutProXML("pathname");
Now I am working for panel in Premiere CC so working on HTML 5 panel and qe dom scripting(.jsx).
In some jsx examples i got there is script to export sequence as final cut pro xml but cannot get the code for project export.
project.activeSequence.exportAsFinalCutProXML(entire_out_path);
Also please let me know if there are any kind of reference available about all the functions and properties in the pe dom scripting for premiere pro cc.
I am using premiere pro cc 7.1, windows 7, Eclipse Kepler.
Thanks in advance,
Anoop NR

When you reimport the exported project XML to FCP, do you get the full project or just the single bin/sequence? If you get the full project then it sounds like you need Premiere help, not FCP help ... have you tried asking on the Adobe forums? If you only get the single bin/sequence then it seems you might have inadvertently selected those prior to creating the project export. Try making sure that your FCP Browser window is active and that you have not selected anything within that window prior to using the File > Export > XML command. If that still causes issue then you might try using an earlier FCP XML version.
Hope it helps
Andy

OMF won't export out of final cut pro.

Exporting a 93min 1920x1080 HD timeline to OMF
5 second handles tried 2 second handles as well.
OMF won't export out of final cut pro. Get error message there is a 2 gb limit.
Final cut 6.0.6
Have deadline. Didn't see it on any forum. Help!! Thanks!!

Seems like a weird thing to not be able to do since it's called final cut PRO...
Bagging on Final Cut Pro for OMF? HA! OMF has been around LONG BEFORE FCP was introduced. It isn't an FCP issue...OMF technology is VERY old. Over 20 years I believe. I used it on Avid...and it always had a 20GB limit.
You cannot deliver 1 track via OMF. You can ask the audio person. I know that Avid now allows you to export an AAF...but FCP doesn't do AAF. For embedded audio I think that OMF is the only way. SO you have to work within the limitations of that format.
Shane

I need to transfr a project from final cut pro 6

I need to transfr a project from final cut pro 6 to an editor with final cut pro 5.
will they have the problem of not being able to open the file? any suggestions out there?

Welcome to the forum!
FCP project files are NOT backward compatible with older versions. But you can export an XML file of your FCP 6 project, then use the XML file to build a new project in FCP 5. Check the manual for details.
-DH

How do I export a project from Final Cut Pro onto my desktop?

How do I export a project from Final Cut Pro to my desktop as a movie?

Can anyone please help me.. when I click on my timeline in my project library and try to export movie nothing happens! and when I try to "share" to youtube I get an error message stating that it cannot be exported because it contains "no video"... The 4 minute music video that I've created with shots off my Canon T2i looks and plays great....If I uploaded the videos into Final Cut but did not save them on my desktop or anywhere else on the Mac would this be a reason to get this message? I have never experienced this before...the only option under "share" that works is "email"
[email protected]

Imovvie won't send project to Final Cut X

Similar Messages

Maybe you are looking for