IMP-00010: not a valid export file, header failed verification

Hi everyone,
I am new in oracle's world, and I've been working with an export from a sun platform, and I try to import to a windows platform. I've been receiving this message error
IMP-00010: not a valid export file, header failed verification
Please, help me I have to finish with that today..
Thanks and have a nice New Year

thanks for your answer.
sorry, but I don't have all exact information, because that export is comming from a client, and I don't know all information. I only know that the platform is sun.
I received the file via an usb memory, directly from the source.
I've been read that if you make an export in sun platform and it isn't as binary when you transfer it to a windows platform, it will be corrupt.
Could you confirm me that?

Similar Messages

  • IMP-00010: not a valid export file (downward from 10.2.0.1 to 8.1.7.0)

    Hi,
    We have requirement to transfer User's all tables from 10.2.0.1 database to 8.1.7.0 database
    I have successfully exported user along with all tables and its data from the 10.2.0.1 database,
    now when i am doing import into 8.1.7.0, i am getting the following error :
    IMP-00010: not a valid export file, header failed verification
    IMP-00000: Import terminated unsuccessfully
    when i searched the internet, in the one blog it mentions as below :
    Oracle's exp/imp utilities are not downward compatible.
    you must use 9.02.1 exp to extract from instance 9.02.03 and then you are able to imp into 9.02.1
    so as per above, i will have to use 8.1.7.0 exp to extract from instance 10.2.0.1 database.
    So, how it can be done ?????
    where i have done mistake ???
    With Regards
    Edited by: user640001 on Jan 7, 2009 10:27 PM

    It seem you quoted me out of context. I was trying to point out that why read some blog entry of the 'net when the basic rules are clearly documented.
    fbortel wrote:
    Well in that very same piece of documentation it becomes clear you cannot export 10G, and import into 8i.Which section says this?
    The table (if that's it) gives a few exampes: "Table 19-7 shows some examples "
    I'm pretty sure that anything after Oracle8 should work. As long as you are using the right version of 'exp'.
    But there is a Metalink Note that goes into more detail. (and should be more correct than my memory allows me)

  • My HDD crashed and I had to reinstall my boot and programmes on a new HDD.  I managed to recover my library.itl.  How can i import it with the new version of itunes? When i try imprt playlist, it replies that it is not a validly exported file.

    My HDD crashed and I had to reinstall my boot and programmes on a new HDD.  I managed to recover my library.itl.  How can i import it with the new version of itunes? When i try imprt playlist, it replies that it is not a validly exported file.

    It should be like the very first time you synced your phone with I-Tunes. It will notice you haven't synced before and just copy everything from your phone into I-Tunes. It shouldn't delete anything from the phone, at least it never has for me. It just puts a copy of everything into I-Tunes and even if you delete an app for example from your phone and you decide you want it back later, you can just go back into I-Tunes and copy it back over. Hope this helps.

  • Urgent: IMP-00034: Warning: FromUser "USER1" not found in export file

    Hello all
    I succeccfully export DMP file using sys user with the option full=y.
    I want now to import the schema objects for the user1 with the folloing command:
    C:\oracle\ora81\bin\IMP.EXE sys/sys@bas fromuser=user1 touser=scott file=C:\omran12-06-2005.dmp
    But I received this error :
    IMP-00034: Warning: FromUser "OMBR" not found in export file
    Import terminated successfully with warnings.
    What is the problem
    Thanks in advance

    Hello
    Thanks for ur replay but doesn't work at all:
    - Itried the first by creatint the user and i received this error:
    C:\oracle\ora81\bin\IMP.EXE newuser/newnewuser@sid file=C:\x.dmp log=c:\log.log full=y
    Warning: the objects were exported by SYSTEM, not by you
    import done in AR8MSAWIN character set and AR8MSAWIN NCHAR character set
    . importing SYSTEM's objects into OMBR1
    Import terminated successfully without warnings.
    Then I tried this:
    C:\>C:\oracle\ora81\bin\IMP.EXE sys/sys@sid file=C:\x.dmp log=c:\log.log full=y show=y
    I received this:
    Warning: the objects were exported by SYSTEM, not by you
    import done in AR8MSAWIN character set and AR8MSAWIN NCHAR character set
    . importing SYSTEM's objects into SYS
    Import terminated successfully without warnings.
    Then i tried this:
    C:\>C:\oracle\ora81\bin\IMP.EXE system/system@sid file=C:\x.dmp log=c:\log.log full=y show=y
    And I get this error:
    Export file created by EXPORT:V08.01.07 via conventional path
    import done in AR8MSAWIN character set and AR8MSAWIN NCHAR character set
    . importing SYSTEM's objects into SYSTEM
    Import terminated successfully without warnings.
    Why nothing work with me????????

  • Video's are not valid exported files

    I moved my entire Itunes library to an external hard drive to free space on my computer and because of this I've had to add everything back into Itunes. When I try and import any of the videos I used to have on it I get the error message: "Video does not appear to be a valid exported file." I don't know how to fix this and I want to be able to add my videos back. Should I just load them back onto the computer or not?

    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

  • Valid Exported File

    I am trying to import a home video that I created into iTunes but I keep getting the error message "cannot be imported because it does not appear to be a valid exported file"
    I used Windows Movie Maker to create the video.
    Thanks for any suggestions you can send my way.
    Cheers
    JC

    I opened the sample pic in 12 Mac and Windows programs and uploaded it to Flickr and Zenfolio, and none complained (see the list below).  I looked at the file with Exiftool and added some sample metadata -- Exiftool usually issues a warning if the file format isn't strictly standards-conforming.
    So this may be a case where the file produced by LR strictly conforms to industry standards but has an internal layout that isn't typically used, tripping up software that doesn't correctly implement the standards.  This has happened at least once before in previous releases of LR, and Adobe changed LR to avoid the problem.   I see hints of that possibility in the Exiftool dump -- JPEGs produced by LR CC have 102 unused bytes after the TIFF header, whereas typical JPEGs don't have those unused bytes.
    You can test this hypothesis very quickly: Open the sample pic in Photoshop CC (or another editor if you don't have Photoshop) and save it out with Save As at the same high quality.  (Other programs generally won't write those unused header bytes.)   Ask your clients to try uploading that version.
    Also, ask your clients for the exact error message (letter for letter) and which software is powering their Web sites.   That could give better clues.
    Mac: Preview, Photoshop CC 2014, ColorSync Utility, Firefox, Chrome, Lattice, Paintbrush, Safari, Word
    Windows 8.1: File Explorer Preview, Irfanview, Paint, Windows Photo Viewer
    Online services: Flickr, Zenfolio

  • Error when IMPORT using INDEXFILE  IMP-00009: abnormal end of export file

    Hi,
    I met the following error while I am doing IMPORT (creating ddl using INDEXFILE option) as.
    imp system/oracle@hpfw9i file='F:\C2Prop\ProdDump20051109.dmp' fromuser=FWORKSADM touser=FWORKSADM indexfile=ddlfile.sql log=st-imp.log
    . . skipping table "FWDEFECTCOMPONENT_PN21"
    . . skipping table "FWDEFECTCOMPONENT_PN22"
    . . skipping table "FWDEFECTCOMPONENT_PN23"
    . . skipping table "FWDEFECTCOMPONENT_PN24"
    . . skipping table "FWDEFECTCOMPONENT_PN25"
    . . skipping table "FWDEFECTCOMPONENT_PN26"
    . . skipping table "FWEQPATTRIBUTE"
    . . skipping table "FWEQPATTRIBUTEHISTORY"
    IMP-00009: abnormal end of export file
    Import terminated successfully with warnings.
    Have you ever experienced the following error message when you imported the db..?
    Also I could see the import was not done successfully when I compared my ddlfileold.sql which is already done using this same dump file
    My actions to make ddlfile
    - I have tried three times to make ddlfile but I failed all and met the same error message.
    try 1 : using 9210 version
    try 2 : using 9206 version
    try 3 : using 9206 version at other machine.
    I need your advice and help.
    Thanks,
    Riaz.

    This means the export dump file is corrupted.
    In UNIX see this command to see whether the dump file is complete
    $ tail expdat.dmp
    It should have EXIT in the last line.

  • IMP-00009: abnormal end of export file

    When I try to import my dump file i receive this error IMP-00009: abnormal end of export file even if my buffer is set to 2000000000.
    Any help would be great.
    Regards

    The export file is probably from an aborted Export session. Better retry the export and then import it again, if possible.
    If not possible, report this as an Import bug and submit the export file that caused this error to Oracle Support Services.
    Thanks and Best Regards,
    -aijaz

  • Import utility IMP-00009: abnormal end of export file.

    IMP-00009: abnormal end of export file.
    I have received a 34 GB dmp file exported using exp utility 9.2. and i am importing it into 10.2.0.1.0
    1) Not sure wheher its exported from Unix or windows.. how to make out?
    2)I imported using ...BIN>imp user1/pwd FILE=C:\exp.dmp
    SHOW=y fromuser=user2 touser=user1 ROWS=Y IGNORE=y GRANTS=y Constraints=
    y log=C:\exp.log
    Note my login user and my to user are same and i have grant DBA to user1.
    3)When i import, after an hour+ it terminates saying abruprt end of export file.
    4)I am not aware of the command used for export whether its FULL DB or only user etc.... how to find out? from show = y i selected 1 username and used it as from user.
    5)This file was sent to me through a FTP server from where i downloaded.
    Plz help i need to import urgently, what should i be doing?

    I also read that FULL=Y is not supported when i import 9i dmp into 10g dmp. Is it true?False
    It is an export of the Backup it seems. What difference does it make if we export from DB Backup and export from DB itself?There is nothing called export of a backup.The dump is created by an oracle binary called EXPORT.
    You can execute this command against an oracle database
    exp username/pwd@hoststring file=c:\oracle\bk\test.dmp fully=y....and so on

  • Pain't cannot read this file.  This is not a valid bitmap file or it's format is not currently suppo

    Have some photos of a warehouse fire in Plymouth Indiana.  Files were saved as .jpg  Can't get them to open.
    One message is "
    Pain't cannot read this file.  This is not a valid bitmap file or it's format is not currently supported." 
    Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
    Carl Beason
    Windows 7, Photoshop cs4
    Help Please

    As has been suggested above, I would explore Opening the files in another program first, and if successful, just doing a Save_As from that program.
    I do not know how sensitive Paint might be, but Ps really wants the JPEG header info to be well-formed. I often encounter JPEG errors in Ps, and my first stop is to IrfanView (free), or ThumbsPlus (commercial), as both seem much more lenient with JPEG's. I have only had a few files, that nothing on my computer would open. I assume that they were just too corrupt.
    With either my IrfanView, or ThumbsPlus, when Opened, I do a Save_As, and choose a low compression/high-quality JPEG. If you other program supports Save_As PSD, that would be my # 1 choice, and keep JPEG out of the mix from that point on.
    Good luck,
    Hunt

  • Infopath 2013 SOAP Web Service Data Connection - Error: The file is not a valid XML file

    Here are the steps to replicate the issue I’m having when adding lists.asmx or any other SharePoint web service in InfoPath 2013. This web service opens fine in the browser from my desktop. My account is a farm administrator and is added to the
    web application’s User Policy.  I can use these services just fine using Nintex 2013 Workflow.
    Open InfoPath Designer 2013.
    Select Blank Form and click Design Form button.
    Click “Data” tab.
    Click “From Web Service” and select “From SOAP Web Service”
    Enter https://mysiteurl.com/_vti_bin/lists.asmx?WSDL for the web service definition.
    Click Next.
    Windows Security window pops up.
    Enter a credential. I tried both my account and the farm account. My account is a farm admin and is added to the web application’s User Policy with Full Control.
    Click OK. It prompts for credential multiple times.
    I get below this error messages: 
    Sorry, we couldn't open https://mysiteurl.com/_vti_bin/lists.asmx?WSDL
    InfoPath cannot find or cannot access the specified Web Service description.
    The file is not a valid XML file.
    Not enough storage is available to process this command.
    We have a project that is in need of these services using InfoPath so any help is greatly appreciated.

    Hi Brian_TX,
    For your issue, try to the following methods:
    Change your service binding in web.config to:binding="basicHttpBinding". It seems in VS it defaults to wsHttpBinding.
    Replace all instances of "parameters" from the web service wsdl with the name "parameter"
    There are some similar articles about the issue, you can have a look at them:
    http://www.infopathdev.com/forums/t/23239.aspx
    https://social.msdn.microsoft.com/Forums/office/en-US/621929c3-0335-40af-8332-5a0b430901ab/problems-with-infopath-web-service-connection?forum=sharepointcustomizationprevious
    https://social.msdn.microsoft.com/Forums/en-US/5fa5eca8-f8d7-4a2e-81ba-a3b4bdcfe5af/infopath-cannot-find-or-cannot-access-the-specified-web-service-description?forum=sharepointcustomizationlegacy
    Best Regards
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • I have an older version of itunes on my L drive.  Everytime I try to download the newest version I get the error itunes.resources is not a valid short file name.  Now I obtained an iphone and cannot sync the phone to my account because it wants me to upda

    I have an older version of itunes on a separate drive.  Everytime that there has been an update to itunes it will not let me update.  Now I purchased an iphone and I hooked the phone up to the computer and it tells me I need to install the latest version of itunes.  I downloaded to try it, but I keep getting an error message that says itunes.Resources is not a valid short file name.  What can I do from here?

    That is a new one on me.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • "this is not a valid PDF file" message when creating a new document?

    Every time i try and open a new document I get a message that says this is not a valid PDF file?
    Has anyone else recieved this message?

    Sorry, I am out of ideas. Unless anyone else can help I suggest you need to contact support directly. It’s usually possible to start a live chat, if an Adobe agent is free, and often to get problems fixed right away.
    To get help now click here for product support

  • Error - 2048 not a valid movie file

    hello,
    I'm a NAPP member and had been following the photoshop TV casts on QT....however, now I get the error message 'error - 2048 not a valid movie file'...its an mpeg4 QT file, but I get the message whenever I attempt to play the downloaded file...or when I try to just watch the stream, it won't open the URL...these are the only movies that I'm having this problem with...as I can watch other movies from other sites w/o incident...NAPP hasn't replied to my inquiries except that they don't support the TV shows.
    Any ideas?...would be appreciated...
    Thanks...
    G5 - dual 1.8 ghz - 2ghz ram   Mac OS X (10.3.7)   Dell Inspiron Core Duo notebook w/ XP home

    T S
    Thank you very much for the link to videolan.org. I was having the same problem playing downloaded Photoshop TV videos. I tried MPlayer which worked but was not comprehensible. I had never heard of videolan, but it works like a charm.
    Thanks again.
    17 PowerBook, 1.33 Ghz   Mac OS X (10.4.6)   2 GB Ram, iWeb 1.1.1

  • Document is not a valid PDF file

    Hi,
    I need help! Iøm trying to upload a visa paper using Adobe-Reader XI and when I upload, it keep saying "document is not a valid PDF file" - what to do now? Maliha

    Are you sure that the document is a valid PDF file? Can you open it with Reader?

Maybe you are looking for