Imp full=y issue.

Dear All,
Database: 10.2.0.1 OS: AIX 5L
i am exporting a full db dump from Server A to Server B. for this purpose i created a user dbadmin on both source and target database and granted him (EXP_FULL_DATABASE & IMP_FULL_DATABASE) privlegs. Server B is a empty Database. i issued follwoing command
" imp dbadmin/<passwd> full=y file=filename log ignore=y "
i am refering to logfile which says :
*. importing SYS's objects into SYS *
* importing SYSMAN's objects into SYSMAN *
* importing SYSTEM's objects into SYSTEM *
though sys / system objects should never be exported/imported. Correct me if i wrong , then why its importing SYS's objects ..?
further more , i could see few tables belonging to sys/system with name "REPCAT$ been imported in target database.
Regards.
ARS

Check below link.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:11511550949535
Ctrl+F "not sure if the sys,system and other users"
and read reply by Tom sir.
yes, some sys and system objects are exported (public synonyms are owned... by sys, application context's are owned... by sys - for example)
Hth
Girish Sharma

Similar Messages

Imp full=y issue(Sorry guys- Repost)

Dear All,
Database: 10.2.0.1 OS: AIX 5L
i am exporting a full db dump from Server A to Server B. for this purpose i created a user dbadmin on both source and target database and granted him (EXP_FULL_DATABASE & IMP_FULL_DATABASE) privlegs. Server B is a empty Database. i issued follwoing command
" imp dbadmin/<passwd> full=y file=filename log ignore=y "
i am refering to logfile which says :
*. importing SYS's objects into SYS *
* importing SYSMAN's objects into SYSMAN *
* importing SYSTEM's objects into SYSTEM *
though sys / system objects should never be exported/imported. Correct me if i wrong , then why its importing SYS's objects ..?
further more , i could see few tables belonging to sys/system with name "REPCAT$ been imported in target database.
Regards.
ARS
Edited by: ARS on Nov 6, 2009 2:55 AM

Check below link.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:11511550949535
Ctrl+F "not sure if the sys,system and other users"
and read reply by Tom sir.
yes, some sys and system objects are exported (public synonyms are owned... by sys, application context's are owned... by sys - for example)
Hth
Girish Sharma

Imp full db successful without warnings

I am doing research to imp full db during my migration from 8i/Solaris db to 10g/windows
Here is the command i come up with , make me right if i am not.....
imp system/ora2000sys full=yes ignore=no statistics=none log=clin_full_import.log
FILE=
D:\yo_momma\dave_is_ugly_1.dmp,
D:\yo_momma\dave_is_ugly_2.dmp,
D:\yo_momma\dave_is_ugly_3.dmp
if this is not successful i will drop users cascade and re-run it ....
Exp successful without warnings.....
/u01/app/oracle/admin/clin/backups/com.par
userid=system/******
full=Y
inctype=complete
filesize=1g
recordlength=4096
buffer=16384
direct=Y

DBA2011 wrote:
I am doing research to imp full db during my migration from 8i/Solaris db to 10g/windows
Here is the command i come up with , make me right if i am not.....
imp system/ora2000sys full=yes ignore=no statistics=none log=clin_full_import.log
FILE=
D:\yo_momma\dave_is_ugly_1.dmp,
D:\yo_momma\dave_is_ugly_2.dmp,
D:\yo_momma\dave_is_ugly_3.dmp
if this is not successful i will drop users cascade and re-run it ....
Exp successful without warnings.....
/u01/app/oracle/admin/clin/backups/com.par
userid=system/******
full=Y
inctype=complete
filesize=1g
recordlength=4096
buffer=16384
direct=Ylook OK to me
Handle:     DBA2011
Email:     [email protected]
Status Level:     Newbie (35)
Registered:     Sep 9, 2005
Total Posts:     2,771
Total Questions:     268 (137 unresolved)
Why so many unanswered questions?

Full screen issue when utilizing Ease of Use on screen keyboard and RDP in Win8.1

Hello,
I am exploring using touch technology with our point of sale application which is delivered to our clients using RDP. The default touch keyboard in Win8 is basically useless for our application so we enabled the touch keyboard under Ease of Use (EoU)
which does meet our requirements. We enabled the KB in docked mode so it is always displayed and locked to the bottom of the display. The issue is that when we start an RDP session in full screen mode, the RDP session is using the whole screen
and slipping under the docked EoU KB. Is there a means to have RDP recognize the reduced screen size with the EoU KB docked and only use the available screen real estate? I understand that I can configure the RDP settings manually and approximate
what I'm looking for but this drops the session into a window which is somethibg I'm looking to avoid.

Hi Steve,
Thank you for post in Windows Server Forum.
As per my research, I can say that you need to set the RDP screen size manually. So after setting the size of Full screen RDP you can able to use. You can also try to switch the application in Remote Desktop connection by “Ctrl+Alt+Break”. Please check
the shortcut to be used when using RDC.
Keyboard shortcuts
http://windows.microsoft.com/en-in/windows/keyboard-shortcuts#keyboard-shortcuts=windows-8
Hope it helps!
Thanks,
Dharmesh

Full screen issues prior to 11

i always seem to find myself wondering, do developers even use their own products? i would assume they do, but i keep seeing stupid workflow issues or simple problems apple was always known for not having. i wont even begin to discuss the direction the hardware is taking (underpowered mini ipad? unreparable/non-upgradable macbook pro?) sheesh, the least you guys could do is make the software work, thats what we pay for. stop worrying about deadlines so much and "make it just work" as youve always been recognized for. ever since mountain lion and full screen apps in osx, it seems as if no one ever used itunes in full screen mode. was it meant to dump you out to the desktop whenever a fullscreen video finishes playback? i patiently waited for the bug fix; though you debut an entirely new version of itunes, and it has yet to be fixed. funny thing is, it has gotten worse. to clarify, itunes is in full screen mode and i choose say, a podcast. although itunes is in position "2" in mission control (dashboard is position "0"), to the right of my primary desktop (position "1"), and fullscreen video playback appears in position "3," upon playback completion i am returned past itunes to my primary desktop. i dont know how this wasnt picked up on and fixed prior to or upon release of version 11. doesnt make much sense to me as to why i have to swipe back to itunes from my desktop to choose the next video since i was in itunes when i chose the video in the first place. in addition, ive also noticed since the release of version 11 that when a video is playing in fullscreen (position "3") and i swipe back to fullscreen itunes (position "2") and choose another video to play without stopping playback, the itunes window replaces my primary desktop (position "1"), leaves the blank grey textured background usually seen behind full screen itunes in position "2" (swiping to it only reverts you back to position "1"), and playback starts fullscreen in its intended place (position "3"). the only ways to fix it is toggle the full screen option for itunes, end the video prior to selecting a different one (which as aforementioned dumps you back to the desktop in position "1"), or quit and restart itunes. aside from the fact that no one seems to like all the "streamlining" that you did to the UI (including me; i dont get the point), i dont understand how you put in so much work in redeveloping an application that wasnt 100% prior to. yes it looks cooler, and sure its cleaner, but is it practical? the workflow is terrible. sidebars became a standard for a reason, they work. you just made a UI that requires me to click more and figure out where you moved everything. did you improve its function? did you simplify its operation? in my opinion, and i imagine many will agree, absolutely not. stop worrying about how things look and pay attention to how things work first. you are deviating from your principal business model and becoming just like all the other development companies who care for nothing but their profits and shareholders. i understand making money is any business's primary goal, but remember what got you here; remember why you have loyal customers. if you forget, we wont be around to catch you when you fall.

I just gave the 4oD site a try (using this link) with the latest runtime and I'm seeing the the scrubber bar, popout and full screen buttons. I tried IE, Firefox and Chrome. Could you try doing a clean install and try again?
How do I do a clean install of Flash Player?
Thanks,
Chris

Imp full db successful with warnings

Looking for options to fix those , or can i ignore them? What would be side effect if i drop/cascade users and re-run imp after increasing tablespace TS_PUBLIC size or i should not do that? and just fix the little warnings or even just ignore them?
Most of tables (i would say 95% ) & there data imported successfully after full imp , db size is 80GB around, import terminated successfully with warnings , which are below.....
IMP-00017: following statement failed with ORACLE error 1659:
"CREATE TABLE "CA_QUERY_1"
"ABLESPACE "TS_PUBLIC""
IMP-00041: Warning: object created with compilation warnings
"CREATE FORCE VIEW "ADMIN"."CHECK_EXTENTS_V"
IMP-00041: Warning: object created with compilation warnings
"CREATE TRIGGER MT1758.MEDDRA_MT1758_THE_SYN_UPD"

DBA2011 wrote:
Looking for options to fix those , or can i ignore them? What would be side effect if i drop/cascade users and re-run imp after increasing tablespace TS_PUBLIC size or i should not do that? and just fix the little warnings or even just ignore them?
Most of tables (i would say 95% ) & there data imported successfully after full imp , db size is 80GB around, import terminated successfully with warnings , which are below.....
IMP-00017: following statement failed with ORACLE error 1659:
"CREATE TABLE "CA_QUERY_1"
"ABLESPACE "TS_PUBLIC""
IMP-00041: Warning: object created with compilation warnings
"CREATE FORCE VIEW "ADMIN"."CHECK_EXTENTS_V"
IMP-00041: Warning: object created with compilation warnings
"CREATE TRIGGER MT1758.MEDDRA_MT1758_THE_SYN_UPD"; I would suggest you to look at export log and find out which are the tables that got failed and import only those tables again. Since the size is quite high as you said.
Secondly, since 95% tables are already import, so i suggest you to increase the Tablespace size by adding datafile or extending existing one, then run the import for rest 5% tables.
Third, You said can you ignore warning? During import oracle tries to create Views, it first check if the tables from which view is being create are already exists or not. If the tables doesn't exists oracle will create view forcefully, and mark these view as invalid. The only way to make the views valid is to alter the views definition to point to the correct base tables.
So there is little activity left after import is done with warning, that you have to alter the view definitions so that correct tables can be used.
Also see MOS -> IMP-00041 ORA-04063 FROMUSER/TOUSER IMPORT INTO NEW DATABASE [ID 1059520.6]
Hope my suggestions helps you

Imp full oracle 10G database window 2003

Hi Experts,
I made a full data based exp as
exp USERID=SYSTEM/scott@cas full=y FILE=D:\Oraclebackup\CAS\exports\casdatabase_042009.dmpLOG=D:\Oraclebackup\CLS\exports\logs\exportTables_042009.log OBJECT_CONSISTENT=Y STATISTICS=NONE
then I create a blank database with new DBname in Oracle 10G in window 32 bit 2003
I try to imp this full data exp. However I got lots of message as
importing SYSTEM's objects into SYSTEM
IMP-00061: Warning: Object type "SYSTEM"."REPCAT$_OBJECT_NULL_VECTOR" already exists with a different identifier
"CREATE TYPE "REPCAT$_OBJECT_NULL_VECTOR" TIMESTAMP '2005-10-17:13:31:32' OI"
"D '306C410305254B08A55576824763662E' AS OBJECT"
" -- type owner, name, hashcode for the type represented by null_vector"
" type_owner VARCHAR2(30),"
" type_name VARCHAR2(30),"
" type_hashcode RAW(17),"
" -- null_vector for a particular object instance"
" -- ROBJ REVISIT: should only contain the null image, and not version#"
" null_vector RAW(2000)"
IMP-00061: Warning: Object type "OLAPSYS"."ALL_OLAP2_AW_METADATA_O" already exists with a different identifier
"CREATE TYPE "ALL_OLAP2_AW_METADATA_O" TIMESTAMP '2005-10-17:13:45:23' OID '"
"B8722EEBE57D428296D658C522D2209F' AS OBJECT ("
It seems that try to duplicate system/sys objects
aslo I got message as
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02019: connection description for remote database not found
Please let me know if you have experience for full database IMP.
Thanks,
JiM

These types of errors are expected. The problem is that types and tables are created as the database gets created. As far as I know SYS owned objects are never exported/imported, but other schema objects are exported and imported. These types of errors are generally ok since the object exists in the target database when the database is created with certain objects.
I'm not familar with this error:
ORA-04052: error occurred when looking up remote object [email protected]
Dean

Exp/Imp full database

Hello guys,
I'm having an issue with importing full database from one database(machine 1) to another database (machine2).
I am getting errors that users don't exist, datafile cannot be read etc errors.
I'm using Windows, and Oracle 9.2.0.6
How can I export the 'create objects' scripts from the source db that can run on the target db?
Any help appreciated.
Thanks,
Bharath

thank you. I actually sorted it out. The path of the datafiles in the source database is not present for the target database. So I created a similar path but kept no datafiles in it.
the import ran successfully and created the users and tablespaces as well.
thanks again

Exp/imp full or transportable tablespaces?

Hi Experts,
DB version: 10.2.0.4 64 bit enterprise edition
OS version: Windows 2003 R2 64 bit
here database moving from 10.2.0.4 enterprise edition to standard edition.
i have went through metalink, i found
*10G : Step by Step Procedure to Migrate from Enterprise Edition to Standard Edition [ID 465189.1]*
*Converting An Enterprise Edition Database To Standard Edition [ID 139642.1]*
so i have taken export of full database before that i have create a DBLINK & TABLES ,
i have impoted into standard edition but i have missed those DBLINKS and grants will imported?
Thanks.

hi guru,
my expectation is the entire database should pilot to new server with standard edition. i have read articles from metalink, as per traditional export/import is a better.
By that process i tested,
1) production database:-
a)created some tables, one database link
b) exp system/*** full=y file=exp.dmp log=exp.log
2)another side, i have created a dummy database using DBCA, and created some tablespaces as exist in export side.
a) imp system/*** full=y file=exp.dmp log=imp.log
so after successful import, i have checked objects but i missed the DBLINK from production.
1)my question is any other parameters should be process within import? to perform full export/import
2)all the schemas will be imported or manully need to create?
3)grants will be imported?
4) what about constraints.
ignore=y rows=n.i want to export rows also(entire database)

Full craw issue with specific web application

We are using SharePoint 2013 Enterprise (15.0.4569.1000). We have public facing (publishing site) with anonymous access enabled on it. While crawling this site we are using default Content Source called "Local SharePoint sites" where we have following
settings.
Start Addresses - http://SP2013APPSRV
Crawl Settings - Crawl everything under the hostname for each start address
Crawl Schedules - Enable Incremental Crawls
With this configuration we try to perform Full Crawl of this content source. the status of this content source goes to "Starting" then to "Crawling Full" and after some time then to "Idle" state. The overall crawl duration never
goes beyond 3-4 minutes. With this if we check the "Crawl Log" screen then except for "Successes" = 1 every other column shows 0 even the "Errors" or "Top Level Errors" column shows no record. Getting into the Success
items we found that the crawling was only done for the single item which is nothing but the start address that was specified into the content source settings (http://sp2013appsrv). Because of this it seems the crawling is not working correctly to pull all
the sub contents of the given host URl, instead it only pulls the top level link. There is nothing helpful in Verbose - ULS logs or event viewer either.
With further analysis of this we found that this issue only exists with single web application only. Because adding another web application URL into the same Content Source does crawls all the contents properly of that web application but still shows single
index item for problematic web application.
Could someone please help us with this issue ?

Hi Ajay,
Based on your description, you have some problems in doing full crawl of a specify web application.
1. Check if the crawl account has 'full read' access to affected web application.
2. Check if allow this site to appear in search results in the search and offline availability in the site setting.
3. Check if you have
opened the urlMappings in SharePoint that will hinder the search function crawls. If you add the code as below into the web.config to open the
urlMappings, it will not crawl the web application.
<urlMappings
enabled="true">
<clear
/>
<add
url="~/Home.aspx"
mappedUrl="~/Default.aspx?tab=home"
/>
<remove
url="~/Home2.aspx"
/>
</urlMappings>
4. Try to reset your search index and then do a full crawl.
The article gives you the details about how to reset your search index.
Best regards,
Victoria
Victoria Xia
TechNet Community Support

FULL Browser Issue

Hello: I am in need of someone's expertise Please...
I have an AS2 .fla with all of my stage items on the timeline as opposed to inside a container swf. Hence, I must chose Center vertical and Horizontal options in the HTML alignment options when publishing in order for my movie to be perfectly centered in the middle of the browser. I would like to have a FULL Browser Background Image, however when I try using the following code, my background ("bg") does not fill the entire browser.
Can someone please tell me what I am doing wrong and if it is even possible to have a full browser background image while still using CENTER alignment in the HTML publish settings? I have tried the following code with and without the Stage align settings and with the xy coordinates centered-still no luck!
bg.Stage.align = "TL";
Stage.scaleMode = "noScale";
bg._width =Stage.width;
bg._height =stage.stageHeight;
bg.x = 0;
bg.y = 0;

I really don't know why this one project is giving me so many issues. Got my external swf cenetered- now the movie dissapears on resize
. I can still hear the music playing from the external swf though:
var swfLoader:Loader = new Loader();
holderMC.addChild(swfLoader);
var bgURL:URLRequest = new URLRequest("index2.swf");
swfLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadProdComplete);
swfLoader.load(bgURL);
function loadProdComplete(e:Event):void {
trace("file loaded")
function resizeHandler(e:Event):void
bg.width = stage.stageWidth;
bg.height = stage.stageHeight;
swfLoader.x = (stage.stageWidth - swfLoader.width) * .5;
swfLoader.y = (stage.stageHeight - swfLoader.height) * .5;
stage.align = StageAlign.TOP_LEFT;
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.addEventListener(Event.RESIZE, resizeHandler);
stage.dispatchEvent(new Event(Event.RESIZE));

Full Duplex issues

        Hello I am seeing a strange issue.
hope to get a little bit of advice on this.
There are two switches connected WS-C3560-48PS-S on one side and WS-C2960-24PC-S on the other side.
the interface configurations are as follows:
WS-C3560-48PS-S
interface FastEthernet0/48
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 101,350
switchport mode trunk
bandwidth 1024
load-interval 30
end
WS-C2960-24PC-S
interface FastEthernet0/24
switchport mode trunk
load-interval 30
duplex full
end
the problem is, the moment i am setting the fa 0/48 on the 3560 switch as a full duplex the interface goes down / down.
the moment i put it back to auto it comes up but the negotiation comes as half duplex and causes duplex mismatch.
Any pointers to fix this ?
many thanks in advance.

***** 3560 Sh ver *****
sh ver
Cisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(53)SE2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 21-Apr-10 05:33 by prod_rel_team
Image text-base: 0x01000000, data-base: 0x02E00000
ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)
Switch uptime is 10 weeks, 2 days, 23 hours, 17 minutes
System returned to ROM by power-on
System image file is "flash:c3560-ipservicesk9-mz.122-53.SE2/c3560-ipservicesk9-mz.122-53.SE2.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C3560-48PS (PowerPC405) processor (revision N0) with 131072K bytes of memory.
Processor board ID CAT1020N055
Last reset from power-on
2 Virtual Ethernet interfaces
48 FastEthernet interfaces
4 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 00:1E:13:AA:8B:80
Motherboard assembly number     : 73-9676-12
Power supply part number        : 341-0029-05
Motherboard serial number       : CAT10256D36
Power supply serial number      : LIT11337DCM
Model revision number           : N0
Motherboard revision number     : B0
Model number                    : WS-C3560-48PS-S
System serial number            : CAT1020N055
SFP Module assembly part number : 73-7757-03
SFP Module revision Number      : A0
SFP Module serial number        : CAT10243H19
Top Assembly Part Number        : 800-25859-03
Top Assembly Revision Number    : J0
Version ID                      : V04
CLEI Code Number                : CNMV3N0CRC
Hardware Board Revision Number : 0x01
Switch Ports Model              SW Version            SW Image
*    1 52    WS-C3560-48PS      12.2(53)SE2           C3560-IPSERVICESK9-M
Configuration register is 0xF
***** 2960 Sh ver *****
Switch#sh version
Cisco IOS Software, C2960 Software (C2960-LANLITEK9-M), Version 12.2(55)SE7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 28-Jan-13 10:22 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01400000
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(53r)SEY3, RELEASE SOFTWARE (fc1)
Switch uptime is 2 days, 19 hours, 15 minutes
System returned to ROM by power-on
System image file is "flash:/c2960-lanlitek9-mz.122-55.SE7/c2960-lanlitek9-mz.122-55.SE7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C2960-24PC-S (PowerPC405) processor (revision K0) with 65536K bytes of memory.
Processor board ID FCQ1719Y3Y4
Last reset from power-on
2 Virtual Ethernet interfaces
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : D0:C7:89:76:19:00
Motherboard assembly number     : 73-12784-05
Power supply part number        : 341-0266-03
Motherboard serial number       : FCQ17190CKN
Power supply serial number      : DCA1713H07L
Model revision number           : K0
Motherboard revision number     : A0
Model number                    : WS-C2960-24PC-S
System serial number            : FCQ1719Y3Y4
Top Assembly Part Number        : 800-33168-02
Top Assembly Revision Number    : A0
Version ID                      : V06
CLEI Code Number                : COMK400DRD
Hardware Board Revision Number : 0x02
Switch Ports Model              SW Version            SW Image
*    1 26    WS-C2960-24PC-S    12.2(55)SE7           C2960-LANLITEK9-M
Configuration register is 0xF

Lenovo G570 Full HD Issue

Now I know my laptop wasn't really built to watch Full HD video. Although, if I download a youtube video in Full HD it plays just fine. The problem is that if I try to watch Full HD video through Youtube it gets choppy and the computer struggles to play the video. I really don't want to download every single Full HD video on youtube. Please let me know what I can do to fix this issue. SPECS2.3 ghz Pentium Dual-Core Processor4 gb's of DDR3 RAMIntel HD Graphics Card

hi Rileyp,
Can you try these steps:
1. Set the power plan to High Performance.
2. Instead of watching the video in Full HD (1080p), try to play it in 720p instead and observe (if you use Chrome, you can automate this (always play videos on 720p) by using Magic Actions).
3. Disable Hardware Acceleration on your browser and observe.
How to Turn Off Hardware Acceleration in Google Chrome
How to Disable Hardware Acceleration (GPU Rendering) in Internet Explorer
How to Disable Hardware Acceleration (GPU Rendering) in Mozilla Firefox
In addition, 1080p videos require high bandwidth (at least 5 Mbps down) to stream properly.
Edit:
Added links
Let me know if the above steps works for you.
Regards

Quick Look Full Screen Issue from Desktop

I have an issue with quick looking files in full screen from a screen other than that which is occupied by the Finder.
Example, I have a pdf on my desktop, if I Quick Look it, it opens OK on all screens but if I try to go into full screeen from Quick Look it does not work unless I am on the same screen as the Finder.
On close inspection, this is because the Finder App options is set to 'This Desktop' (control-click on the Finder icon in the dock and choose Options). If I set it to 'None' then this issue cannot be replicated. Anyone think that this is an issue with Lion and Quick Look should not be written this way? This was initially confusing for me and I though that something was broken.

I remembered that there had been a slight bug in the Leopard Quicklook, so that if you went to full-screen QL, then used Command-Tab to switch to another program, then Command-Tab back to Finder, you would be back in QL Full Screen, but you could now navigate with the arrow keys. At first I thought this had been fixed, and started mucking about with other key combos and accidently got it going again. Took awhile to figure out exactly what I had done, but it works like this:
1. Select your file, hit spacebar and click the full screen arrows
2. Command-tab to some other program
3. Mouse click the toolbar or sidebar of the open folder with your file in it
4. You can now navigate with the arrow keys
Although I don't really see how this is better or easier than opening the folder, hitting Command-A, then bringing up QL....
Francine
Francine
Schwieder

Neo Platinum full duplex issue

Due to issues with the nforce boards and World of Warcraft I had to change my duplex setting from Autonegotition to Force Full Duplex 100mbit. The problem I found is that with this setting I can only get 300kbit download rates at best. If I go set the duplex to Force Half Duplex 100mbit, I'm back up to my full 4Mbit rate. Has anyone else seen this issue, or know any reason it should do this? Is there a problem for me to run at half duplex? I'm using a cable modem and comcast as my provider.

I used to use the 1.9 bios, as I remembered, the Full Logo screen could be disabled or enabled in the bios. If it couldn't, Then I suggest you clear cmos and load defaults to have another try. Or just directly upgrade the bios to the latest version.

Imp full=y issue.

Similar Messages

Maybe you are looking for