IMP:-sap* deleted in 000 Client

Hi All,
If some one deleted " sap * i.e. superuer ID in 000 client with out any knowledge of the user.
Kindly let me know how to solve this issue ASAP.
With Regards
Prashanth

You want to have user SAP* back into client 000?
Check if parameter login/no_automatic_user_sapstar is set to 0. In that case, you can logon to client 000 with sap*/pass and the user is created again..
Kind regards,
Mark

Similar Messages

How to unlock DDIC & SAP* user in 000 client-Sybase database

Dear Experts,
Accidentally DDIC and SAP* user in 000 client has locked. We are using SYBASE ASE database. I know how to unlock user in other database (eg:update <sid>.USR02 set UFLAG = 0 where BNAME = '<user id>'' and mandt = <clinet number>;).
what is the equal query in Sybase.
Thanks, Jyothish

Hi Jyothish,
Please try below commands
Login to Sybase ASE database using
isql -Usa -S<SID> ( it will prompt for password)
use <DBSID>
To check the account status
select UFLAG from USR02 where BNAME ='SAP*' and MANDT='000'
go
To unlock the account
update USR02 set UFLAG=0 where BNAME='SAP*' and MANDT='000'
go
You may add schema owner SAPSR3.USR02 in the query if above query does not work.
Hope this helps.
Regards,
Deepak Kori

How to login into 000 client -- sap* in ecc6.0

how to login into 000 client--sap* in ecc6.0
because i need to generate solution maneger key.
or tell me any alternate for generating the same.
Edited by: THIRU MALAI on May 9, 2008 9:55 AM

Hi,
1. You have to Configure the Email connections through SCOT tcode.
2. After that you ccan send/recive a mails from exchange server and SAP R/3 systems.
Look into the following link.
http://help.spa.com--> search for E-mail configuration and aslo search for FAX configuration.
Regards,
Srini Nookala

Sap* deletion in Production System

Hi experts,
I wanted to do TMS configuration which require to login to my Production System from 000 client. I am newly joined here. And i dont now any of user password (DDIC,SAP,BASIS)* for client 000. I have tried reseting it from my MSSQL Database, But it requires Server Restart which i can not take because of High volume of users. I am taking help of my ABAPER in the same. But is there any other way to reset there password.i have tried Update and Delete command for unlocking and deleting the sap* user from database level. Command completed successfully but no use. I will be thankfull if anybdy can provide me the programme.
Regards,
Vaibhav Gore

Hai,
After deleting the user SAP* in client 000 did you try to login into the client with SAP* and password PASS.
Also check parameter login/no_automatic_user_sapstar value in Instance profile or default profile, this should be set to '0' in order to login with SAP* and PASS password. If the above said parameter is set to '1' then you have to set it to '0' and then bounce back the SAP system in order to make the changes effective. After this you can login with SAP* and password PASS.
Regards,
Yoganand.V

Password forgot in 000 client

Hi Basis Gurus,
We have forgotten our sap* and ddic password in 000 client.
Please tell us the steps how to reset it.
Please help us
Regards,
Anil.

Hi Anil,
Connect to DB
SQL> conn / as sysdba
SQL> delete from Schemaowner.USR02 where bname ='SAP*' and mandt=000;
SQL> delete from Schemaowner.USR02 where bname ='DDIC' and mandt=000;
SQL>commit;
Now login to 000 client with SAP* and PASS as password and create DDIC and SAP* users with new password .
Regards,
Kalyan

Deleting imports from client 800

Hi,
I had imported few transports into my system.I cannot change these objects as I do not have the license to do so and they were only for reference purposes.Now I want to delete these objects completely from my client 800.Is that possible ?
I also have one more question : Whenever I make changes to the 800 client (any new implementation) , it reflects in client 000 as well.Why is that so ? Isn't 000 the SAP source client and should not have the new SAP implementations ? It does not however contain the SAP transaction data from client 800.
Kindly suggest. _

1. If I have the license installed in my SID I01 , 46 C IDES , can i install the same license in my 47 E , SID DRS system ?
No
2. When I installed the IDES 47 E in my Win2003 server m/c , i see that the temp license has a validity upto 10th March , 2012. Is it possible to go ahead with development in this system in the customer z workspace? Does the validity date point that after this date I would be unable to access or work with this system ?
Ideally you have to install another license before expiry. But you may be able to work on temp license for 2 weeks.
[http://help.sap.com/saphelp_nw04/Helpdata/EN/a7/512c95407a11d1893b0000e8323c4f/content.htm]
3. If I have to obtain a fresh license , how should I go about it and how much does it cost for this license ?
Note 94998 - Requesting license keys and deleting systems. For costing you may contact SAP directly as it is not available online anywhere.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=94998]

Password of Solution manger 000 client

Dear All,
I am facing problem I have to apply sp patch in solution manger and I donu2019t have the password of 000 client is there any way I can get the password .
Regard

Hi
If you are unable to login you need to delete SAP* so that it will be recreated and you can login as sap*/pass
Try doing this
login to ora<sid>
sqlplus u201C/as sysdbau201D
delete SAPSR3. USR02 where BNAME = 'SAP*' and MANDT='000';
commit;
bounce the server for paramter to take effect then try with sap* and pass
SAPSR3 would be your schemaid
To find the schema, perform u201Cenv | grep schemau201D (if its unix platform) windows check in enivronement variable for schema id
See that you have parameter login/no_automatic_user_sapstar = 0
then only we can reset sap* password
If the parameter doesn't exist then maintain in instance profile
/usr/sap/SID/SYS/profiles/SID_DVEBMGS00_Host
with entry login/no_automatic_user_sapstar = 0 and bounce the server
please look this link
http://www.sap-img.com/basis/changing-the-default-password-for-sap-user.htm
Regards
Uday

SAP BPC 7.5 Client, Silent install but with progress bar, can it be done?

Hi All,
I need to uninstall the BPC 7 Client and then deploy 7.5 to around 250 users accross the country.
We have SCCM (SMS) in place so will be using that.
I have the uninstall of 7 sorted and I have the response file etc sorted for the silent install of 7.5 and the install runs, silently, no issue.
Is there a way though that one can "turn on" the progress bar during the install? So that users dont shutdown or disconnect in the 15min it takes the install to run.
By way of example, in the SAP Business objects enterprise client on can configure the Silent install so that although it never prompts the user for a reponse there is a progress bar that runs, indicating that there is an install in progress.
Thanks in advance,
Bryan

Hi Sebastian,
No worries, I am using a pop up countdown so the users have some idea on progress. Would love to know why the install runs for over 15min.
In the above case the uninstall was easy as we had deployed using MS AppV so it was just a case of deleting the advert in SCCM and the application was pulled from the users desktops.
For 7.5 I am using a vbscript with following to uninstall:
The install string pulled from the clients registry uninstall folder:
RunCommand Chr(34) & "C:\Program Files\InstallShield Installation Information\{EC8753EF-EE78-48B5-A4D0-FBBD237B5D53}\setup.exe" & Chr(34) & " -runfromtemp -l0x0009UNINSTALL -removeonly"
We create a custom link, so this deletes it.
DeleteFile "c:\Users\Public\Desktop\SAP BPC 7.5.lnk"
You should be able to create something similar for 7.0 & 7.1
Hope that helps,
Bryan

Client from 800 to 000 client to activate the TAX Procedures..

Hi Guru's,
In my practice server i am not able to get the tax procedures TAXINN and TAXINJ for this i went to institute they said that copying from 000 client to 800 client..then we can get in 800 client also.. but here is the problem how to do it..
Please friends if any one know's please reply me...
Thanks & Regards
Sunil gupta.

Hi Sunil,
Please go through the link given below.
SAP Library - BC ? Client Copy and Transport (BC-CTS-CCO)
Hope this will help you.
Regards
Eugene

TAXINN Tax procedure is not appearing in IDES SAP ECC 6.0 client 800

Hello Gurus,
TAXINN Tax procedure is not appearing in IDES SAP ECC 6.0 client 800. Can anybody tell the step by step procedure to get it done??
It is very urgent.
Thanks

Hi,
TAXINN has to be copied from '000' client to our client.
check following
[http://forums.sdn.sap.com/thread.jspa?threadID=1540232]
Regards
kailas Ugale

BOE XI 3.1: How to batch delete 10,000+ history files?

Hi,
Does anyone know how to batch delete 10,000+ history files?
Thanks,
Vicky

If you contact support, they will provide you with a script that fixes this.
Also, Service Market Place has a note on it about this :
SAP Business Objects Enterprise Daylight Savings Brief
Applies to: All Business Objects Enterprise XI r2, and XI 3.x Environments
Brief: Due to Daylight Savings Time changes that went into effect in North America on March 13, 2011 there is an increased potential of scheduling issues to appear in Business Objects Enterprise XI r2 and XI 3.x environments. If you encounter any potential Daylight Savings Time issues please refer to the SAP Knowledge bases below for potential resolutions and if required please raise a Message for Processing to SAP Active Global Support.
Business Objects Enterprise XI r2:
1448881 - Multiple instances spawned after daylight savings time change
Business Objects Enterprise XI 3.x:
1568239 - After DST change Schedules fail in Business Objects Enterprise XI 3.1 with: Object could not be scheduled within the specified time interval

SAP* deletion in MSSQL2005

Hi all,
I want to delete my sap* user through MSSQL2005 db. but fails to execute command. can anybody guide me in dis
thanks in advance.
Vaibhav

Hi
Open Microsoft SQL Server Managment studio.
login with <SAPSID>adm user.
click on new query.
execute below query.
delete from <sapschema>.USR02 where BNAME='SAP*' and MANDT='000'
bounce the server for paramter to take effect then try with sap* and pass
See that you have parameter login/no_automatic_user_sapstar = 0
then only we can reset sap* password
If the parameter doesn't exist then maintain in instance profile
/usr/sap/SID/SYS/profiles/SID_DVEBMGS00_Host
with entry login/no_automatic_user_sapstar = 0 and bounce the server
Regards
Uday

SAP B1 9.0 Client PC Installation Problem

Hi Experts
               I am installing sap B1 9.0 client PL07 that time my Database are not showing after installation then i try to download install sql server native client.while installing native client am getting the below error
               Installation of product failed
               because its not supported on this operating system.for more information
               on supported configuration
Here i attached screen shot after download and install the native client
Note:My Operating system is Windows 7 ultimate 64 bit
Regards
Vinoth

Hi Vineth,
Assuming that you've installed Native client
Is the installation completing without errors?
-Please uninstall and re-install -as advised right click and run as admin on installation
-then after installation the first time you open the application, don't double click, try right clicking and run as admin as well
Also, refer to below thread
internal error (-1102) occurred [Message 131-183]
Good luck
Thanks,
D

SAP* not authorized after Client copy

Dear All,
Here's the scenario:
1. Created a new logical system for a new Quality client 230.
2. Created the new client 220
3. scheduled a test remote client copy from the new client, source Production. (Successful)
4. Scheduled the actual client copy to run last night.
5. Today morning, I'm logging into the new client with SAP*, it prompted me to change password.
6. I want to look for the client copy logs (SCC3), but getting "not authorized"
7. Checked all other transactions, all giving "not authorized" error
Any help would be appreciated. Thanks in advance.

Dear Reza,
Better to go for Client Export Import process . This is what SAP reccomends for coping clients between
different systems ( Like from Production to Quality ) as the remote client copy has many
disadvantages..
For this 1 ) you should get the downtime of production system and do the client export process .
SCC8 . See the logs at scc3 .
2) Copy the datafile and cofile to the Source system
3) Import it usting stms_import .
Monitor the logs as the logs will be grown massive and make sure enough space is there.
4) After client copy , go for post processing ( scc7 ) .
Hope you are clear and feel free to get back if any doubts.
Regards,
Nibu

Deletion of the client

It started the deletion of the client and when arrived in the table ACCTIT below shows the error canceling the copy:
Database error 824 at DEL access to table ACCTIT
Database error 0 at FET access to table REPOLOAD
Repost table TST01 (TemSe->XRTAB(3)->64; Flag: MDFF; Key ABAP)
Spool: RT_UPDATE Reports Error 64 for Table
Repost table TST01 (TemSe->XRTAB(3)->64; Flag: MDFF; Key [600]SPOOL0000004388 ,1)
Database error: TemSe->XRTAB(2)->128 for table TST01 key [600]SPOOL0000004388 ,1
Error at DB commit, return code 001024
Relevant data:
S.O. - Windows 2003 SP2
D.B. - MSSQL 2005
Someone went through this?
Thanks.

It seems your TEMSE is corrupt - run a consistency check (see note 98065 - Spool consistency check with RSPO1043 as of 4.0A).
Markus

IMP:-sap* deleted in 000 Client

Similar Messages

Maybe you are looking for