Impact deletion flag set process order

If i have "Set deletion flag for old process order" after the same any impact in Finance or production side.
Chintan

Hi,
You should set the deletion flag only for orders:
which are delivered or technically completed
for which variances have been calculated
for which you do not anticipate any further follow-up costs
If follow-up costs must be charged to the object, you can remove the deletion flag (DLFL). Deletion indicators (DLT), however, cannot be withdrawn.
As long as the accounting period is not yet closed, data (such as from results analysis) can still be transferred to Financial Accounting (FI). The FI period should be closed before you can set the deletion indicator (DLT), since no more costs can be settled to FI after that point.
When the orders are deleted, the quantity information on the routing operations is also deleted.
Regards,
Antje

Similar Messages

Set deletion flag on process order.

Hi Friends,
My requirement is i want to set deletion flag on process order.
For this system gives error as
1. System status CRCR is active (ORD 93000112)
2. System status ORRQ is active (ORD 93000112)
Here i have solve the problem number one through transaction code BS22 (i.e. under System status I0241 -CRCR , previously LKZS - Set deletion indicator & LVMS -Mark for deletion was maintain as Forbidd now i have made it under No influence )
after saving this customization system give only error two ( System status ORRQ is active (ORD 93000112)
Same way when i try to find ORRQ but here i havenu2019t found ORRQ.
Could you plz help me.
Best Regards,
Parag Save.

Dear,
The system sets this status when you release the order, provided that the Order record required indicator is set in the order type-dependent parameters (see Customizing for Process Order)....
This setting is there in SPRO....
Production Planning for Process Industries - Process Order-Master Data-Order-Define Order type Dependent parameters...
In this you set the option Order record Required....
Requirements are that the process orders are settled, associated PI sheets, inspection lots and any linked purchase orders are complete.
Following are prerequisites for closing a process order
1 The order must have the status Released (REL) or Technically completed (TECO)
2 The order balance must be 0
3 There can be no open purchase requisitions, purchase orders.
4 There can be no future change records from confirmation processes.
.Now Calculate Overheads using Tcode : KGI2 - Individual Processing
CO43 - Collective Processing
Step to be follow,
1.Calculate WIP using Tcode : KKAX - Individual Processing
KKAO - Collective Processing
2.Calculate Variance by using Tcode : KKS2 - Individual Processing
KKS1 - Collective Processing
3.Finally do the settlement of Order in Tcode : KO88 - Individual Processing
CO88 - Collective Processing
Please refer this thread also,
https://forums.sdn.sap.com/click.jspa?searchID=17422319&messageID=5934846
The transaction COA5 (Archive Administration Preprocessing).
This will allow you to set the deletion flag
Hope this helps.
Regards,
R.Brahmankar

Set Deletion Flag for Process Order is not possible due to status ORRQ

Hi Guys,
I need to mark some process orders for deletion, but the status ORRQ (order record required) is blocking me. I've read some SAP Documentations and SAP Notes and it's recommending run tcode COPA to store the order records. A
Although the Process Order is appearing there to be stored, we I execute store process it gives me a message that "Zero Orders were stored".
So, can you help me on this?
Thanks.
Pérsio Kojima

Hi Pérsio,
Check In Customizing whether the order type has been set up for storing in T code COR4 (order type-dependent parameters, Master data tab page, Order record required indicator).
IF the option is selected, the system will not delete the record directly. The order record must be archieved and then deleted.
based on this either you can de activate the option or archive before deletion.
Hope this answers your question.
regards,
Pradeep.

Deletion flag on process orders - HELP!!

In order to speed up the CO Closing (WIP, variances, settlement) we want to activate the deletion flag on all the old process orders with the COAC transaction but it says that the ORRQ status is active.
In order to remove this status we mark in the COR4 the "No process data documentation required" for every plant and order type.
We run the transaction COPA to archive the corresponding logs for the corresponding orders but when we mark all the orders that we want to archive the system says " Total Process orders archived: 0"
How can we mark the deletion flag on all these orders???
PLease we need to reduce the time of some process urgently.
Message was edited by: Corrections
Eugenia Zuniga Perezbolde

Hi,
We are facing the same problems here. We tried to complete the inspection lot, but this has no effect on status ORRQ.
The transaction COPA is not working on it...
Regards,
Pérsio

Set Deletion flag to production order

Dear Gurus,
I have a set of production orders, which has been partially confirmed. I confirmed them fully from CO11. These orders are for our sample materials so that the cost is zero. but when i try to set the deletion flag it gives an error as
Unprocessed future change recs for order 1004050SP prevent del. flag/completion
Message no. CO688
Please kindly guide to set the deletion flag for these orders or close.
Br,
PubuduS

Hi,
Please check the below thresd for similar error.
Process Order Deletation Flag
Regards,
Chandra

Prerequisites required to set Deletion Flag for an Order

Hi Experts,
I need to know what are all the Prerequisites required to set Deletion flag for an Order.
i.e. can i set deletion flag for any existing order?
Kavin

Hi Kevin,
System will allow you to set deletion flag if,
- No Goods Movement is carried out.
- No Confirmation has has been carried out.
- Conclusion of point 1 and 2 is order should not carry any cost.
- If In process Inspection is active then Result Recording should be not started.
- In case of Process Order CRCR (Control Recipe Created) status is not allowed.
Regards,
Dhaval

Set Mass Deletion Flag for production orders

Hi,
I am planning to set mass deletion flag for production orders using programme PPARCHP1.
My users dont have access to SE38/SA38 and they cant run this program from directly.
I dont wnat my users to do this preprocessig using SARA or CO78 as it will give access to them for whole archiving process + it only works in background.
I am thinking to create a Z tocde for this program and use it in dialogue mode also. Do you guys see any aftereffects with this process?
Let me know if creating a Z tocde sounds a good idea?
Edited by: santosh sarda on Mar 10, 2011 3:23 AM
Edited by: santosh sarda on Mar 10, 2011 3:28 AM

The standard SAP procedure to set the archive is that
- you run COAC in background to set deletion flag and deletion indicator. It should be set as the variant and run periodically (i.e., monthly).
- The system get all orders with DLV status in the past xx days depending on your variant to set deletion flag.
- Also it will change the status DLFL to DLT based on your residence time 1.
- The orders with DLT that reside in system longer than residence time 2 then archive.
This should be done by IT department or background jobs. Not the users.
Which, in my opinion, is enough. However, if you do need the user to select by themselves which orders they want to set deletion flag (why is that?). Then you may want to explore enhancement.
For the sake of simplicity, I will recommend to use user status (normal cohv can change that, as we know; therefore no new fancy screen needed). Then develop the user exit to set deletion indicator in PPCO0002 - EXIT_SAPLCORE_001 based on user status. The rest of the procedure should remain the same.
If you want to allow user to do every steps and develop some Z* screen for users, they must have the authorization for archiving anyway. They just don't have the t-code COAC, and SARA. In my opionion, it is overkill. Plus in terms of users, I don't think they have skills enough if there is some errors during archiving (i.e., logical file error, etc.).
Hope it helps.

Can't delete or set delete flag on PP order

I want to delete a PP order and it tells me that I cannot select selected assembly order xxxxxx for deletion. The status of the order is REL MSPT PRT PRC RESA SETC. The production order has no goods movements associated with it , yet I can not delete the line or set the deletion flag.

John,
I see RESA status meaning that previously WIP run has happenned and system would have posted WIP. I would suggest you to first set TECO status to the order, and then Run KKAX transaction then you need to run KO88 to settle the costs to sales order. Once this is done settle the sales order after making TECO status to the sale order item and then you can Reject the sale order Item. This would allow you to perform the Deletion Flag to the order(I think system will automatically set "DLFL" status to the order).
Regards,
Prasobh

What are the Pre-requisite to set Deletion Flag for Maintenance Order ?

Hi Gurus,
              Pls give me what are the pre- requisite to set the deletion flag.
              I want to set deletion flag to some Maintenance Orders which are with notification, but deletion flag - SET,RESET Indiacaors are inactive.
              Following are my observations-
              1) Order is not yet released.
              2) No actual Cost is with the order.
              3) No PR and POs are with the Order.
Pls guide me.
With best regards,
narendra

hi
you can put the deletion flag only when the order has the status CLSD or the balance of the order must be Zero
you can refer the following link
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e65a0462a11d189000000e8323d3a/content.htm
regards
thyagarajan

Mass revoke deletion flag for Production order

Hi all,
As we know, we can use program PPARCHP1 to mass set deletion flag for production order.
now, i would like to revoke deletion flag, i had been use tcode: co02 Functions -> Deletion Flag -> Revoke to do it.
but, i have lots of production order, is there any standard program could mass revoke deletion flag?

Dear there is no standard functionality or transaction is available to revoke the deletion flag the only option is you have to do it manually one by one order through the option which you already mentioned.
Cheers
KK

Deletion flag on production orders.

Hello PP Gurus,
Is there any mass transaction to uncheck the deletion flag on production orders.
I know the deletion flag can be set thru CO78.
But, is there any way to uncheck deletion flag for bunch of production orders thru mass??
Thanks in advance !!
Sashivardhan

Hi,
You can do it by the following options
1) LSMW - take one order do recording of reversal of deletion flag and then run with your complete order list.
2) BDC - with help of your ABAP team create a BDC and the run the complete list of order to apply reversal deletion flag.
There is a program "RIARCORVS" for activating the Deletion flag collectively but right now as i do not have the authorization for SE38 i un able to check whether this program supports uncheck the deletion flag collectively.
Please check this program if it is not supporting then you have to go for a BDC or LSMW
Pavan

Unable to activate deletion flag for production order

Hi Experts,
I have created production order with reference to sales order. Now status of production order is REL PRC CSER GMPS MACM RESA SETC.
I have already done goods issue & Goods receipt for this order and reversed the same all GI & GR.
Now balance on order is also zero.
My query is that I trying to activate deletion flag for this order but I found option of Activate is disable.
Pls help.
Regards,
Rajesh

Hello
Probably, this is an assembly order. The deletion flag cannot be set manually for static assembly orders.
A production order is recognized by the system as an assembly order because of the internal system I0170 on table JEST. Whenever this status is set for the order, the deletion flag can't be removed from the order on transaction CO02.
See question 8 of the FAQ note 540834:
8. Question:
    When are the deletion flags for assembly orders set?
    Answer:
    You cannot manually set the deletion flag for static assembly
    orders. Instead, the system automatically sets the deletion flag
    when the corresponding sales order item:
    o is completed (only for static assembly orders),
    o is canceled,
    o or is deleted.
    The deletion flag for assembly orders with dynamic assembly is set
    automatically if the corresponding sales order item:
    o is canceled,
    o or is deleted.
    You can set the deletion flag manually using the archiving PP_ORDER
    and, as of Note 1628094, using the transaction for changing the
    order.
BR
Caetano

Deletion Flag setting Error message for production order

"Unprocessed future change recs for orders prevent del. flag/completion"
I tried to used COFC and CO1P but didn't work out?
How to fix this issue i am trying to set deletion flags for certain production orders?
If i even found errors in final confirmations how to fix them

Hi Aparna,
This is absolutely fine to set the deletion flag to archieve the Production Orders.
For this error, which you are getting, there could be entries in COGI or CO1P..
Whether you are using Process Control (check in OPK4)?
If that is the case you should have got the entries in CO1P.
Can you see any entries in COGI? even 102 movement against the order?
Check once again and revert for further discussion..
Regards,
Siva

Set deletion flag for service orders

Hi
How do I mass update service orders and notifications to set the deletion flag.
I tried with IW72 but no luck Please help.
Thanks
Kumar

Hi,
You can use batch recording to assign DLFL status to work orders,
This is the program code
                      0000     T     IW32
SAPLCOIH              0101     X
0000           BDC_CURSOR                                                                                CAUFVD-AUFNR
                      0000           BDC_OKCODE                                                                                /00
                      0000           CAUFVD-AUFNR                                                                                4000488
SAPLCOIH              3000     X
0000           BDC_OKCODE                                                                                =LVMS
                      0000           BDC_CURSOR                                                                                CAUFVD-AUART
SAPLCOIH              3000     X
0000           BDC_OKCODE                                                                                =BU

How to set deletion flag in Production order item level

Hi Friends,
I have a requirement like...
Suppose production order conatians 100 items. now i want to set deletion flag for 20 items only.
In Co02 t.code deletion check box is disable mode.
There are nearly 100 production orders .i have to write the program....
Is there any BAPI or other way to meet this requirement.
Can you please help me..

Also, You might want to have a look at the BAPIs like BAPI_PRODORD_SET_DELETION_FLAG which are used to set the deletion indicator but it appears to me the deletion flag can only be set at the header level using these BAPIs.
Please have a look at SAP business object BUS2005 methods from transaction SW01 for more Production Order related BAPIs.
One more thing ... since you mentioned that in CO02 the deletion indicator is greyed out, then it might mean you are missing the authorizations to set the deletion flag. Please consult with your Authorization (BASIS) administrator. As a hint, the authorization object here is C_AFKO_AWK.
Cheers,
Aditya

Impact deletion flag set process order

Similar Messages

Maybe you are looking for