Impact in FI if we add/delete New plants & BA

Dear Gurus,
My client want add new plant and business areas to existing system. Pls provide me how to analysis the Impact of this on current system and wht are the pre-requisites to take while doing this.
Regards,
Venkat

Hi,
Good evening and greetings,
The Plant is attached to a Business Area and any transaction you do on a plant will impact the Business Area and ultimately end up in accounting.
All you can do as a part of checking the impact is
1. There are standard reports like MB5B and MC.9 to find out the activities that happened in the Plant.
2. Use F.01 (Financial Statements) at the Business Area level to see the impact.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Similar Messages

How to add a new plant from a different R3 into the existing new GL design

Hi Experts,
We have a scenario where we have a BI system already functional and the the FI reports like balance sheet is already available on the Portal.
This flow is based on standard business content for new GL concept
Now a new plant has been acquired and that plant already has R/3 and it's own G/L accounts.
Now we have to build 2 reports:
1 - The balance sheet for the new plant.
2 - Consolidated balance sheet for the complete organization including the new plant G/.L accounts.
DS: Leading Ledger Balances (0FI_GL_10)
0FI_GL_10 --> 0FIGL_O10 --> 0FIGL_C10 (for Totals)- 0FIGL_V10
0FI_GL_10 --> 0FIGL_R10 (Remote cube) --> 0FIGL_V11
How best can we merge this new plant?

Hi,
SEM-BCS or BI-BPC NW 7.0N is meant for similar kind of requirements. You'll probably need to get a functional guy involved for mapping the GL accounts from the new company to your existing one and have journal entries for inter-company transactions. After doing the same you can then consolidate both the data and have a common output.
search about BPC or BCS and you'll find out more. If you still need to do it in existing BI setup then get someone from FI and set the mappings of GL Accounts from both set the business rules and create a new cube to load the consolidated data.
Hope this helps
Regards
Raj

Add a new Inventory org

Hi Guys
please assist me,with the following
what would the impact be if;
1.) add a new inventory org after been live for 5 years?
2.)makin the cost of the new inventory org standard and the other inventory org is average?
thank you in advance

1.) No impact whatsoever. You will have to make sure you do all configurations for that org depending upon the functionality you plan to use (such as inventory parameters, wip parameters, planning parameters, subinventories/locators etc.) See if you can use the Copy Organization functionality to create the new org.
2.) This is also completely supported.
Hope this helps
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant
513-325-9026

Release Strategy for New Plant

Dear All,
I have a Release strategy in my 3 Plants and it is working fine.
Now I want to add one more plant under the same release strategy.
I tried to add the new Plant in CL24N. System allows me to add the same in this but the RS is not working in this new Plant.
waiting for reply

hi,
you follow the following steps to insert new characteristics value in your release procedure.
1. define the new characteristics value plant4 in your characteristics.
2. assign the same characteristics value plant4 in classification of release strategy.
3. run the release simulation and comes out.
4. now create PO for your requirment and save it.
5. u can use me22n/23n to view your release status of po.
hope it helps....
manoj singh

Adding a new plant

hi all ,i would like to know what authorisations are to be added when a new plant is created ?(from PS point of view)

Hi ,
User Roles are defined as per the Authorization matrix decided by the Organization and this is done by system Admin. The authorization objects like T-AD7900420,T-AD79004200 requires authorization for Field name WERKS. Suggest ur basis consultant Add ur new plant wherever WERKS field is there.
Rgds

My old computer crashed and I lost my old library of recorded CD's and new music. I downloaded iTunes again and found my old account info. How do I add a new CD without deleting all of my music on my iPod?

My old Computer crashed and I lost my old library of recorded CD's and tunes. iTunes says I must delete everything off my iPod in order to add a new CD. It also said I already have an account which I was able to locate. I don't know how to get into my old account. I think that would solve everything. I have Windows XP. I'd appreciate any input.

No.
All iTunes content on your iPod Touch should be in your iTunes library on your computer, and your iTunes library on your computer should be included with your computer's backup along with all other important data - stored on an external drive or some other external media used for backup purposes only.
When music was purchased on a CD, if the CD was lost and you returned to the store where the CD was purchased with your receipt, were you given a replacement CD?
The same applies here.

Ive changed my apple id. in my iPad and iPhone under iTunes it's showing the new id but under iCloud still shows old I'd. I have been told to delete account and add in new one but worried in case lose all my stuff that's already saved in iCloud. any idea?

Ive changed my apple id. in my iPad and iPhone under iTunes it's showing the new id but under iCloud still shows old I'd. I have been told to delete account and add in new one but worried in case lose all my stuff that's already saved in iCloud. any idea?

If all you did was rename your ID, you can go to Settings>iCloud, tap Delete Account, choose Delete from My iPhone when prompted, then sign back in with your renamed ID. Deleting the account only deletes the account and any data you are syncing with iCloud from your phone, not from iCloud. Provided you are signing back into the same account and not changing accounts, your data will be synced back to your phone when you sign back in.
If, however, you are changing to a new account with a new ID, choose Keep on My iPhone when prompted. Then choose Merge when you sign into the new account and turn your iCloud syncing back on to upload your data to the new account.
Before deleting the account, save you photo stream photos to your camera roll (tap Edit, tap all the photos, tap Share, tap Save to Camera Roll).

Ipod touch 4's files are deleted whenever i add a new file into it through itunes (the files i have on my ipod touch aren't in my itunes before hand) and i don't know what to do to keep these files from being erased. PLEASE HELP :(

my ipod touch 4th generation has files that i didnt back up because i didnt know i was supposed to. the when i tried to add one new file to my EMPTY itunes, all files are deleted, yes because i know i didnt back the files up and the files on my ipod arent in my itunes. so i cancelled adding the new file and all files
are back again, like i didnt press the sync button when it showed the deletion. what am i supposed to do about this? i dont want my ipod files to be deleted, i just wanna add new files freely without losing any of my old files. please help.

You want to transfer purchases from the iPod to your iTunes account.
Connect the device to iTunes but do not sync.
Select File > Transfer Purchases.
This will copy the content purchased via iTunes on the iPod to your iTunes account.

Deleted my domain and cant add a new domain

Hi all
I deleted my partner domain name inside the admin panel and when i try to add a new domain i get this error msg....
Error
Domain already exists. Please delete all records associated with this domain before re-adding it.
Can someone also tell me what the Advanced DNS Record is for cause i deleted that to and have no idee how i set this up :-/
Please, need help!

Hi,
The issue here was that the domain was being locked for rebranding thus causing this error and preventing you to re-add the domain. I've since escalated this so we can unlocked the rebranded domain and then wipe clear so you can re-add the domain back into the site with all your DNS records applied as normal.
We'll respond back to your case ticket once resolved.
Thanks for your patience.
-Sidney

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

Hi,
I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
Latest version of Adobe Reader:- http://get.adobe.com/reader/
If you still experience the same issue, please share the following information:-
- Screenshot of Adobe Reader showing printer options
- Screenshot of Microsoft Word showing printer options
- Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
Regards,
Nakul

Each time I add a new contact to my IPhone 4, it deletes an existing contact. How do I stop this?

Each time I add a new contact an existing contact gets deleted. It only seems to let me have 20 contacts in my Phone before it starts deleting them.
Has anyone else had this problem? Does anyone know how to stop this?
I have backed up my phone to my Mac and that stops it for a few days, but then it starts again.

Get help using iCloud Contacts - Apple Support

Hi All,How2 delete a pkey for std table and add 2 new primary keys

Hi All,
How2 delete a pkey for std table and add 2 new primary key fields .Please provide me the required procedure .
Thanks&Regards.
Bharat.

Hi Bharat,
First thing is you need to have the access key to change any standard dictionary object/standard programs/ standard transactions.You may get this from your basis person after getting approval from your respective manager.But changing or modifying the standard object is not recommended, but if there is no alternate to meet the business requirement then we have to follow this way only.
Next, you need to check whether this table's primary key is being used in any other table as foreing key or not. If there is, then you must remove this relation and then you can delete the unncessary primary key field from that table.Finally you can add the two new fields and set them as primary key, save, check for any errors and activate.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

I have changed settings on my email account with my provider, but in order to activate the address they instructed me to delete my account and add a new account with the same email address. Will this delete my all my email history? Any advise please?

I have an OS X 10.6.8 and have had problems with my mail. I have changed my account settings with my mail provider, but they suggest I now delete my account and add a new account with the same email address. Will this delete my email history? Can anyone please advise?

I have the same problem as the emails go to my iCloud account that I cannot access!!! I cannot answer the security questions as someone else must have set up my iCloud account. Nothing seems to work. It would be great if someone has some ideas as what can be done to recover the situation?

Why is it that when I delete a song off my 4th generation I touch it will not allow me to add it again. I manage my music manually (no syncing). I can add a new song, but as soon as I delete it on my I touch, I can't put it back on.

Why is it that when I delete a song off my 4th generation I touch it will not allow me to add it again. I manage my music manually (no syncing). I can add a new song, but as soon as I delete it on my I touch, I can't put it back on.

I never heard of that problem before. I I can suggest is the stand fixes:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Adobe flash does not work on bootcamp windows 2002 xp. down loaded to windows. works with Mac. No program folder for such. shows up in "add delete programs" (in setting) but without a file size. I have a MacBook Pro purchased new in June 2010.

Using bootcamp (windows 2002 xp) I down loaded adobe flash player from the windows platform. told me it installed successfully. however does not work in windows, does works in mac. in xp there is no created program folder for such or created short cut. In the control panel (xp) in add/delete programs it is listed but wihout any file size or frequency used. I've deleted & reinstalled numerous times. Mac OS is 10.6.8. Windows is 32 bit. Can't find a thing that discusses this. THANKS!

I just now posted it Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913

Impact in FI if we add/delete New plants & BA

Similar Messages

Maybe you are looking for