Impact of Activation of DMS-Characteristics Change Log in existing DMS.

Dear All,
We have created DMS documents without activation of change log for DMS-characteristics. Now we are planning to activate this functionality but we do not foresee the impact of this activation on existing DMS.
Can any one give suggestion.
Best regards
Abdullah

No conflicts/impact in your case.You may activate the functionality.However,please bear in mind that the changes will be logged/tracked only for the new DIR's that you create post activation.For all the existing DIR's,the path 'Environment > Display changes' will be displayed minus the changes/log.
Regards,
Pradeepkumar Haragoldavar

Similar Messages

Need to get a list of PSA tables and change log tables existing in a PC

Is there a standars table to look up all active DSOs and the change log tables associated to those DSOs?
and also Data sources and the PSA tables associated to that DS.
I need to get a list of PSA tables and change log tables existing in a processchain(whioch deletes the data in them time to time)how do I do this in a quicker way?
Thanks in advance

Hi Ramya
Check RSTSODS table with filter of User App CHANGELOG ---> For change log tables

Activation of ODS fails: Change-Log Request ODSR_... does not exist in ODS

Hello Experts,
I have a problem loading in an ODS object in Release BW 3.5. This load is in parallel to loading in a Cube and InfoObjects from 10 different SAP sources monthly.
Everytime, I load data, Activation fails. The Error message is "Change-Log Request ODSR_... does not exist in ODS ..." These Requests (30 requests) are very old starting with the Go-Live date of the application in 2005. If I search for the first Request in Reconstruct, a request without a InfoPackage-Name is found and if I reconstruct the request, all other new loaded Request are activated and everything is fine. The next month, the same error appears, but without the one old request in the list reconstructed the month before of course.
A few months before I had to repair loading and deleted also requests in the ODS. Then I realized my mistake, that reconstruction is not possible, because the request was gone in the reconstruction list. So I searched for the PSA Request in the ODS reconstruction list, found the requests and reconstructed these. Could this be the reason for my current problem?
But how can I stop this error? Reconstructing all of the requests did not work, because one request says, no active update rules exist for this request. So I stopped reconstructing every request of the long list.
Please help me, I could not find any helpful information until now ...
Many thanks in advance,
Hannes

Hi,
For the old requests that you don't want and that are not valid, goto the monitor for those and mark them red. After that you won't face any problems while activating the new requests.
The reason this is happening is that during activation BW thinks that these old requests are valid as they are green and tries to activate them as they are in squence. When it dosen't find them then it gives the error. If you mark them red, they are ignored and the next request is taken into consideration.
Cheers,
Kedar

Characteristics Change Log: Program RCCLUKA2 ??

Hi,
I am looking for a table or method to document changes made to the characteristics of DMS docs. Can you advise if there is a table similar to DRAP that displays this or if there is another method possible?
EDIT: I have searched the forum and found a potential solution to my problem [Re: Document Management - Enhancem. to log changes to Classification Character.;
However I am concerned what the results of running the program RCCLUKA2 retroactively will be as there is already DMS docs in my system.
Can anyone please advise?
Thank you
Edited by: goldencleric on Nov 19, 2010 3:38 PM

Hi,
in the mentioned older thread have you also read through the link for Classification Change documents:
http://help.sap.com/erp2005_ehp_02/helpdata/en/24/4764e4416711d189ec0000e81ddfac/frameset.htm
The execution of the report will change the way the classification data is stored. After running the report the classification values are stored in table INOB and with the value in field CUOBJ the INOB table entries are linked to entries in table AUSP.
Please see also the SAP notes 942691 and 943559.
Best regards,
Christoph

Equipment Characteristics Change Log

Hi,
I have a requirement of maintaining the log of the changes that are done to the characteristics of the equipment which is a transactional data. Is there any possible way of doing that.
The equipment data is not only changed manually but it is changed by the interfaces from third party systems through IDOC's, i want to maintain these changes as well.
Regards,
Ravi G

hi,
check the table
HIKO - Order master data history
reward points if hlpful.

What is the impact - Activating Change Logs for Material Classification Dta

To activate Change Logs for Material Classification Data I must first set the flag for "Multiple Objs Allowed" for the Class Type 001 Material Class. I am curious of what the impact of setting this flag will be. Also, is there a way to measure the DASD impact of activating the Change logging for this data.
Thankyou
Kevin

In addition to the performance impact the process of turning on Change Logs for Classification data will convert the tables KSSK and AUSP to use an internal SAP number as a key instead of the Material number. This will cause problems for any custom programs that access those files directly and expect the material number to be the key. This file conversion occurs during the execution of program RCCLUKA2 which is used to Flag the change logs for existing records. This can be reversed by running report RMCLINOB. Because of the above impact we decided here to NOT implement this change in production.

Difference between Delta "Change Log" and "Active Table (Without Archive)"?

In BI7.0 environment, we perform our Delta loads (the DTP settings under the Extraction tab, there is a field called Extraction Mode and it's value is selected as "Delta") every day among all our DSOs.
There is a section called "Delta Init. Extraction From..." under the same tab in DTP, there are four radio buttons:
Active Table (With Archive)
Active Table (Without Archive)
Archive (Full Extraction Only)
Change Log
Then what is the difference between "Change Log" and "Active Table (Without Archive)" if both Extraction Mode is "Delta" for two Delta loads?
Thanks!

Hi ,
The new options SP16 has are:(Chk Note 1096771)
Active Table (with Archive)
The data is read from the active table and from the archive or from a near-line storage if one exists. You can choose this option even if there is no active data archiving process yet for the DataStore object.
Active Table (Without Archive)
The data is only read from the active table. If there is data in the archive or in a near-line storage at the time of extraction, this data is not extracted.
Archive (Only Full Extraction)
The data is only read from the archive or from a near-line storage. Data is not extracted from the active table.
Change Log
The data is read from the change log of the DataStore object.
Delta will always be picked from change log table.Only during intialization you can choose between getting data from change log or active table.If you are doing the load first time and are initializzing delta in subsequent data targets, then pulling data from active table will get lesse volume of data then it would have got from change log table....All subsequent deltas will be picked up from the change log. And when we need to reload data into the data target (which would be a full load) - we use active table.
From change log : you can take below ones as targets
1) Cube 2) DSO with Addition as the update for the Keyfigures
From Active table: you can take below ones as targets
1) Cube ,if and only if, the records are never changes in the source once after creation
2) DSO with Addition as the update for the Keyfigures ,if and only if, the records are never changes in the source once after creation
3) DSO with Overwrite as the update for the Keyfigures ( incase deletions is not happening in the source system)
Pls check this link
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/e8c56ecd313c86e10000000a42189c/frameset.htm
Regards,
CSM Reddy

Filled fields become blank in DSO change log

Hi experts,
I find an unusual behavior in DSO activation.
For some records for which I find in PSA, new data table (and in debug also!!!) correct data, when the request is activated I find in change log table all characteristic fields empty; the key fields and key figure fields are ok and correct in all tables.
It happen randomly for some orders and for a few requests.
It happen when I have one storno record, for example:
PSA (order, item, customer, material, storno, quantity)
10000, 10, AAA, YYY, , 25
10000, 10, AAA, YYY, X, -25
DEBUG (order, item, customer, material, storno, quantity)
10000, 10, AAA, YYY, , 25
10000, 10, AAA, YYY, X, -25
CHANGE LOG (order, item, customer, material, storno, quantity)
10000, 10, AAA, YYY, , 25
10000, 10, , , X, -25
ACTIVE DATA (order, item, customer, material, storno, quantity)
10000, 10, AAA, YYY, 25
In some other cases:
ACTIVE DATA (order, item, customer, material, storno, quantity)
10000, 10, , , -25
Have you some ideas? It is very strange.
We are on a 7.0 BW system, but with 3.5 data flow (update rule).
Thanks in advance.

Vito,
This happens some times...
1. Did you transport any change to this DSO where characteristics were added and are these the ones that are blank...
When this happens - see if you can clear the change log ( if this is an option ) and then reactivate the cube.
Also there is a program to regenerate the activation program, I am not able to locate this - but then usually reactivating the ODS will usually clear this issue because it regenerates the activation program.

Need suggestion to get data from change log table of ODS.

Hello,
There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
Please let me know if you have any suggestions.
Regards,
Sanjay Chaurasia.

Hi,
You can use the changelog table of the DSO.
Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
In the update rule Routine, give the tech name of Change log table instead of Active table name.
Hope it helps.
Krishna

Activate change logs for the table V_T007K

Hi,
Change log check box is activated in table and change logs is activated in system. But still I am not able to view any change logs recorded for the table V_T007K using SCU3 transaction.
I tried by changing some data and than checked the SCu3 transaction. nothing is recorded against the table.
Please let me know what needs to be done to capture the change logs for the changes done to the data in the table V_T007k table.
Thanks in Advance.
Thanks & Regards,
Madhuri.

Hi
The table u mentioned V_T007k is not a transparent table
.its a view only for views u cant track changes.
But only for transparent tables u can only track changes thru SCU3
Also u can find the changes in a table from SAP TABLE
CDHDR and CDPOS.
if helpful reward me points.
Regards
Manas Ranjan Panda

Need detailed info about Active,New and Change log table in BI 7.0

Dear Experts,
I am new to this technology. Can you any one explain in very detail about ACTIVE, NEW and CHANGE LOG tables workflows.
And also i am requesting you all to give tips to how to study BI 7.0
Regards,
Ameer.N

For your first problem solution is this note: 936644
You might have not mapped the filed in your tarnsfer/update rules?

Change log level for exit activity in BPEL

Hi,
Everytime my BPEL process reaches an exit activity it throws a WARNING log message saying:
"The process instance has been terminated because an exit activity was encountered."
This is not an error and should therefor not be logged at WARNING level. How do I change it to be INFO or any other level?

In terms of access, I believe the audit files generated from the agent are created with full access to the entire portal, and I don't believe there is a way to restrict it to certain section apart from doing manipulation on the .log files that are exported.
The process of creating the archiving agent involves going into the Audit Manager utility from the Admin section, and then you'll see it in the middle of the Main Settings page.
I hope that helps.
user5817265 wrote:
Thanks Geoff. I knew I overlooked something simple.
Is the owner the person who created the archive file? What controls who creates it?

T095B and ANLZ change log activation

Hi Experts,
We want to activate change log for table T95B and ANLZ. Will it have impact on system performance after doing so? As per my understanding it should be no. Please guide.
Regards
Zunaid

Hi,
Whether to log the changes made to a field is based on the flag "Change document" in Data element property (Further Characteristic Tab). These change logs will be updated in tables CDHDR & CDPOS.
If you want to log changes made to the columns in the custom table you have to create the change document object in
transaction code SCDO.
Search SDN for details on Creation of Change document objects.
Regards
Vinod

Configure the Change Log for the activity

Hi to all,
I would like to know if it is possible to configure the "change log" for the activity.
Thanks in advanced,
Matte

Carlos,
Can you be more specific on the term 'Configure'. Change log is automatically generated by SBO. The only thing you can change is the numbers of Historical instances of the log
Administration > System Initialization > General Settings.......Services Tab...History or Log Settings. Be default it is 99 instances.
Suda

Problem in uploading data from psa to active data and change log dso.

hi experts
my data from psa is coming to new data dso but not to active data and change log dso. can you please help me out...

Uday,
Please select the request from Manage screen of DSO and click on Activate, pop-up comes again select the request and click on Start. ( If it is Standard DSO ).
In case of Write optimized DSO you need not to activate it.
Regards,
Ramkumar.

Impact of Activation of DMS-Characteristics Change Log in existing DMS.

Similar Messages

Maybe you are looking for