Impact of Changing the Factory Calendar

Hi,
I want to know how factory calendar settings impact various things in production planning,sales and distribution,FICO and other modules.
If buisness needs to change the factory calendar at the middle of the year due to some reasons,how it will impact and what are all the necessary care to be taken to overcome that impact.
If anybody having the document regarding the factory calendar,please share the link.
Please guide me regarding this
with regards
Girish

Hi Girish,
If you take from PP point of view we assigned factory calender to work center if we changed it, the it will effect on scheduling of order, capacity planning. I dont think u will find any problem , if u change it then you need to run MRP again.
You have to assign factory calendar to PLANT
Go to SPRO>ENTERPRISE STRUCTURE->DEFINITION> LOG GENERAL>DEFINE COPY,DELETE AND CHECK PLANT>DEFINE PLANT
Regards,
R.Brahmankar

Similar Messages

  • Date is outside the factory calendar range

    I am trying to run a BW query. When I click on the calnedar icon field. It gives this error.
    Error: Date is outside the factory calendar range
    Msg No. FK884
    What could be the problem in the query? Has anybody had the similar problem before? I tried to search in SAP notes and could not find anything close to this.
    I will  Appreciate your help. Thanks a lot.
    Abhi

    Hi Abhijit,
    We got the same error message in 2010.
    1) Check in transaction SCAL that the Factory Calendar ID 01 (i.e. German) is valid to 2009. This explains the error message.
    2) Found SAP Note 1136142 about the configuration of default factory calendar ID of F4 Help and hierarchy for Time-characteristics in BI 7.0.
    SAP Note Solution:
    The key figure attribute obtains its value from the default work calendar as it is maintained in transaction RSRHIERARCHYVIRT (General Settings -> Default Factory Cal. ID).
    This setting is valid across the entire system and does not permit any variable selection of the factory calendar for each query.
    Furthermore, a value for 0NUMWDAY is calculated only for the period in which the default factory calendar is valid.
    3) Check in transaction SCAL that the Factory Calendar ID of our location is valid to 2050.
    The problem is solved after changed the Default Factory Cal. ID from 01 to the ID of our location in transaction RSRHIERARCHYVIRT.
    Regards,
    Ricky

  • ICal: Changing the assigned calendar of an event sends out a new invite to all participants

    iCal version 5.0.3:
    I have multiple accounts set up (iCloud, shared, Exchange) in iCal.
    I've noticed that when I receive an invite that is assigned to the wrong calendar (e.g. to my icloud calendar) and I then change the assigned calendar to the Exchange calendar, iCal actually sends an invite to all the attendees with me as the organizer of the event!
    Instead of just changing the assigned calendar in my iCal, it creates a new invite on the new calendar from me to all the invitees.
    This seems to be new behaviour (bug) in version 5, as I can't remember this happening in earlier versions. It stopped being funny when it just did this with a company-wide HR event to all employees
    My default calendar is set to the Exchange account, but iCal seems to ignore that ever so often when adding new invites
    Any ideas on how to prevent this, or do i have to wait for an update to iCal?

    Hi Chris,
    Welcome to Apple Discussions.
    I often do the same thing (ie create an event in the wrong calendar). Are you aware that the assigned calendar appears in the info pane. You could simply select the correct calendar there, even reassign events.
    I understand the desire to do this with Quickeys, though I suspect very few people here use Quickeys. So if you don't get an answer here I'd suggest you consider the Quickeys forum: http://forum.cesoft.com/

  • How to find out the Factory Calendar ID used by  an Organization

    Hi Experts,
    I want to know Factory Calendar ID used by an Organization.
    Which table store the Factory Calendar information for an organization.
    Is there any function module to get the Factory calendar of an organization.
    Please help me ASAP.
    Point will be rewarded for helpful answers.
    Thanks in advance
    Kulvendra Kumar

    Hi
    chk the view v_001p_m
    there u can find ur org nization so there u wull find the calender assigned to them.

  • What's Impact of changing the customer Name(along with Bill To and Ship To) at the header level after book

    Dear All,
    Revision: 11.5.10.2
    We have a case where some of the orders we have created have incorrect customer name along with incorrect Bill To Ship To.
    All these orders are booked. And their Line Status is either Awaiting Shipping or Supply Eligible.
    What Impact of changing the customer Name(along with Bill To and Ship To) at the header level.
    Thanks,
    Helen

    Hi Helen-Oracle
    As said above there should not be an impact if the warehouse on the order before and after changing the customer, ship to and bill to remains same.
    Additionally, if the item on-hand qty is sufficient to reserve the item and there is no B2B internal requisition kicked off.
    As long as the above conditions are fine, I don't see any impact of changing the customer, bill to and ship to.
    Also, you can run a complete wing to wing cycle in case you really want to test the behavior of the system in such scenario.
    Please feel free to mark the response as helpful or correct if you think it is helpful and to help people easily find help and answered responses.
    Thanks
    Mirza Tanzeel

  • Warning of " Date of  outside  the factory calendar Range"

    Hi Experts,
            I have created a variable  of ocalday,It is taking  # values and it showing warning " Date of  outside  the factory calendar Range".How avoid this warning.Actually intially in the one of infocubes carries the # value for 0calday, now we have deleted it, even then  it taking # values and showing same warning.I have check at variable it doesnt carring any default value.Now to delete the # values from variable so that it should not show any warnings.
    Can any body suggest me any thing.
    Thanks
    Vinod

    Hi Srinivas ,
       Thank you very much for your reply.There is # value in the master and transaction data.Even im not able to suppress this message.As it indicating a msg no 884 which is not there message list in RSRT.
    Can you suggest me any other thing.
    Thanks
    Vinod

  • The factory calendar

    Hi Gurus,
    I am facing a problem Currently the system is not considering the factory calendar while giving a firm day. For eg, if the firm date is after 20 days, it is not considering the "off-days" in between and treats all the days as working days.
    Regards
    yogendra

    Hi Yogendra,
    It would be helpful if you provide the example of what your seeing to help us understand better.
    If the system is not considering the holidays or weekends of your organization while proposing for externally procured parts, then it is a normal behavior, as external procurement is based on calendar days & internal procurement is based on work days.
    Check & revert if the above answers your query.
    Regards,
    Vivek

  • Performance impact after changing the awr snapshot timing from 1 hour to 15 minuts.

    want to know performance impact after changing the AWR snapshot timing from 1 hour to 15 minutes.

    Hi,
    1) typically performance impact is negligible
    2) we have no way of knowing whether or system fits into the definition of "typical"
    3) the best way would be to do that on a test system and measure the impact
    4) I would be concerned more about SYSAUX growth than performance impact -- you need to make sure that you won't run out of space because of x4 more frequent snapshots
    Best regards,
      Nikolay

  • Invalid factory calendar or error in the factory calendar

    When I am trying to post " Goods issue for consumption:" in T.code MB1A getting below error error
    Invalid factory calendar or error in the factory calendar
    I am made chages in OY05 still facing same issue. Please help me out.

    Hi
    The factory calender is not a mandatory field during configuration, but is required for IM postings to occure.
    Check and maintain factory calender:  SPRO\SAP ref IMG\Enterprise structure\Definition\Logistics general\Define, copy, check, delete plant.
    Regards

  • How to define just every month's 10th and 20th as the factory calendar?

    Dear professor:
    I want to define every month's 10th and 20th as the factory calendar's working days.and all the other days are holidays?

    Please try this link
    http://**********************/2008/09/factory-calendar-for-plants.html
    Regards,
    Nitin

  • Changes to Factory Calendar Not reflected in work schedule

    I have updated the exsisting factory calendar in PRD .
    Yet the changes do not seem to have taken effect. I have tried to regernerate the work schedule. However I'am not sure I have done that properly.
    Any assistance would be greatly appreciated.
    Thank you

    Hi.. you cant expect any change in the Factory calender affecting work schedules. If you want the work schedules to be updated with the holidays you need to be updating the holiday calender.
    Factory calender is mainly for Plant Schedules, Bank transfers in finance , etc

  • How to change the Arabic calendar display

    How to change the calendar display from Arabic to english

    Go into Settings > General > International and make sure that Calendar Format is set 'Gregorian' and also that Region Format is set to an English-speaking country e.g. UK, USA

  • Charm Impact on changing the production server

    Hi All,
    we currently using Charm for a three system ECC landscape.
    Now currently so many changes are there in various stages.
    now , the team is planning to change the production server to high availabitlity server.
    there will not be any change in the transport route and all, only instead of existing server, the new server details will be added.
    I just wanted to know will there be any major impact in the current chagnes.
    kindly advice.
    Thanks,
    Subhashini.

    Hi
    its like system migration to the new server? or it is by client export?
    can you refer the thread [How to replicate Existing running Production server.|How to replicate Existing running Production server.]
    and read the note [Note 1395727 - ChaRM project does not work after product version changed|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1395727]
    more further on
    [Note 1394820 - SMSY: Converting SAP ECC system to SAP ERP system|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001394820&nlang=E]
    check and update
    jansi

  • Changing the ADF Calendar

    Hi All,
    We have a requirement to create a Appointment Page where the Activity Providers can be more than 50 and we dont want to use colors to distinguish between the appointments created for various Activity Providers.
    What we need is something like this where we show the time at the top and the different Activity Providers on the left side. Currently in ADF calendar, we can show the Different Activity Providers as checkboxes at the top and different colors to distinguish various activity providers. Is it even possible to do change the checkboxes and have something like a grid format as show below.
    If not, what will be the best way to go about it.
    8 A.M 9 A.M ..... .5 P.M
    Activity 1
    Activity 2
    Activity 3
    Please Help.
    Thanks,
    Ajith

    I'm guessing the "Oracle JDeveloper Handbook" is the published McGraw-Hill book by Duncan Mills, Peter Koletzke and Avrom Roy-Faderman:
    http://www.amazon.com/Oracle-JDeveloper-11g-Handbook-Development/dp/0071602380/ref=sr_1_4?ie=UTF8&s=books&qid=1279005819&sr=8-4
    The 11g version of this book replaces the earlier releases, 10g, 9 etc.
    As a general text for understanding JDev & ADF it's a recommended read. As Michael says, I don't believe it covers internalization though.
    There is a more advanced guide the "Oracle Fusion Developer Guide" by Frank Nimphius and Lynn Munsinger:
    http://www.amazon.com/Oracle-Fusion-Developer-Guide-Applications/dp/0071622543/ref=pd_sim_b_1
    This is a more advanced text, not recommended for beginners, but a recommended read once you understand the basics.
    Back to the original question in this post, internalization is covered in section 21 of the ADF Web Guide:
    http://download.oracle.com/docs/cd/E14571_01/web.1111/b31973/af_global.htm#CHDGCAFI
    If you're looking to customize ADF BC error message it's covered in section 37.8 of the ADF Fusion Guide:
    http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcadvgen.htm#BABEFGCI
    I wrote a blog entry about the latter sometime back, which may or may not be relevant to the task at hand:
    http://one-size-doesnt-fit-all.blogspot.com/2007/05/dont-constrain-yourself-displaying.html
    CM.

  • How to find the Factory Calendar ID

    Hi,
    I using the FM DATE_CONVERT_TO_FACTORYDATE to calculate the number of working days between two dates.
    I am using the working day indicator and counting the number of days.
    This FM has the input 'Factory Calendar ID'.
    I have only the service organization as the input. How can i get the relevant Factory calendar ID?
    Thanks in advance.
    Regards
    Shanthi

    Hi,
    You can use the FM:  RH_OM_ATTRIBUTES_READ to retrieve the country for a particular service org.
    Pass  PLVAR= 01, OTYPE = O, OBJID = serv org object ID, SCENARIO= Service or Sale depending in which the attribute country is maintained in org model. You will get the attibute Countryin ATTRIB ->LOW field.
    Regards,
    PP

Maybe you are looking for