Impact of changing vtp server name

Dear Sir,
Please let me know as below:-
1.) How's vtp works?
2.) what's the impact chaging vtp server name?
thanks.

Hostname doesn't have anything to do with the VTP domain name.
VTP runs in 3 modes - Server, Client and Transparent.
In server mode you could add VLANs and it gets propogated to all other servers and clients if the domain name is the same. In client mode the switch only gets VTP updates and uses it but you can't add vlans. In transparent mode the switch that gets the update from the server forwards the VTP update but it doesn't use itself.
When you say VTP server name I assume you must be taking about VTP domain name. If you change the domain of the VTP server and if that's the master server then you could isolate that device from the other switches and it may result in a network outage.
HTH,
Sundar
*Please rate all helpful posts.

Similar Messages

How to change ASE server name in windows

how to change the server name in Adaptive server enterprise running on windows

Windows is going to require a few more steps if ASE is running as a service.
Update all registry entries containing <servername> with <newservername>:
HKLM\SOFTWARE\SYBASE\Server
HKLM\SYSTEM\CurrentControlSet\Services\SYBSQL_<servername>[ _BS | _XP ]
NOTE: Doing a registry search on <servername> will bring up a ton of other locations, eg, legacy entries, ControlSet00X, etc ... not sure if all of these have to be changed, too ...
NOTE: Haven't installed any of the latest ASE packages in windows so don't know if SAP's gone an changed the HKLM\SOFTWARE sub-branch name from SYBASE to SAP
=========================
In addition to Ryan's notes:
- any other sysservers entries that refer to the old servername (eg, loopback)
- any remote servers would need to update their external/remote logins, remote servers and/or proxy definitions ... as appropriate
- if the ASE is involved in replication then you're looking at whole 'nother can of worms ... off the top of my head ... rs_databases, rs_idnames, rs_repdbs ... and of course any repdefs/subs that include the ASE name ?
- obviously (?) any monitoring/maintenance/operational jobs ... documentation ...

Changing the server name on package connection string.

I have a connection string in a package which is a local connection string and not in project connection manager and isn't parameterize as well. Now I need to change a server name of the connection property without using editor. Can I do that and how ?
Moyz Khan

I agree about using configuration for connection string but unfortunately this is an inherited project/packages . And my task it to make these run as currently I don't have luxury to modified it.
So I was able to change most of the connection string with below update
update[SSISDB].[internal].[execution_parameter_values]
setparameter_value=replace(cast(parameter_valueasvarchar),'OldServer',NEwServer)
update[SSISDB].[internal].[object_parameters]
set[design_default_value]=
replace(
cast([design_default_value]asvarchar(1000)),'OldServer','NEwServer')
Now the only one its complaining is the Project connection string . If I know where to look and update that I might be able to run these packages .
Moyz Khan

What's Impact of changing the customer Name(along with Bill To and Ship To) at the header level after book

Dear All,
Revision: 11.5.10.2
We have a case where some of the orders we have created have incorrect customer name along with incorrect Bill To Ship To.
All these orders are booked. And their Line Status is either Awaiting Shipping or Supply Eligible.
What Impact of changing the customer Name(along with Bill To and Ship To) at the header level.
Thanks,
Helen

Hi Helen-Oracle
As said above there should not be an impact if the warehouse on the order before and after changing the customer, ship to and bill to remains same.
Additionally, if the item on-hand qty is sufficient to reserve the item and there is no B2B internal requisition kicked off.
As long as the above conditions are fine, I don't see any impact of changing the customer, bill to and ship to.
Also, you can run a complete wing to wing cycle in case you really want to test the behavior of the system in such scenario.
Please feel free to mark the response as helpful or correct if you think it is helpful and to help people easily find help and answered responses.
Thanks
Mirza Tanzeel

How do I properly change the server name in mountain lion server?

I need to change my server name to a FQDN, but tried this with Lion server in the past without success. I know in lion you'd use server app, but that's no longer avaiable in mountain lion server and I want to make sure I get this right the first time.
Thanks!

I was able to get everything working with some assistance from Apple's enterprise support. After changing the host name, the DNS was still not resolving properly and I couldn't turn on open directory so that I'd be able to start profile manager. The DNS interface is considerably different than that in previous versions of server. The network was set to manual ip with dhcp, which was pulling back an external IP. Overriding the DNS info coming in via the dhcp, setting it to localhost, resolved the issue.
Thanks!

Changing Report Server name

How can I change Report Server Name.
I have installed Report Server rep60_ifs. Because I have problems , I want to change it.

I was created new REport Server Service REPSRVGORDE
with following entry in tnsnames.ora ( on 9iAS)
repsrvgorde.world=(ADDRESS=(PROTOCOL=TCP)(HOST=IFS)(PORT=1949).
In My Form in the trigger WHEN_BUTTON_PRESSED:
declare
L_REPID REPORT_OBJECT;
L_REP VARCHAR2(200);
begin
l_repid := Find_Report_Object('REPORT8');
Set_Report_Object_Property(l_repid, REPORT_FILENAME, 'ajde');
Set_Report_Object_Property(l_repid, REPORT_EXECUTION_MODE, RUNTIME);
Set_Report_Object_Property(l_repid,REPORT_SERVER, 'repsrvgorde');
Set_Report_Object_Property(l_repid, REPORT_DESformat, 'HTML');
Set_Report_Object_Property(l_repid, REPORT_DESNAME, 'proba');
-- run the report
l_rep := Run_Report_Object(l_repid);
:block3.pr:=L_REP;
WEB.SHOW_DOCUMENT('HTTP://.../.../rwcgi60.exe/GETJOBID='||L_REP||'?server='||'repsrvgorde','_BLANK');
END;
When I am running this code , I'm getting the report_job_id, and after that the message " FRM-41214 Unable to run report"
What's the problem now?????

"Is it possible to hide/remove/change the server name/type and

Is it possible to change the server name/type and version number being sent in the http response header by iPlanet Web server so a hacker can't see what server and version I'm running? If yes, what is the procedure to do it?

Hi,
I have tried the ServerString none entry in magnus.conf but still it is showing the Server information in the header if you use telnet . Is there any other way to hide or to mask this information.
Thanks,
Ramki

How to change report server name in 80 forms at once????????

Hi All
i am migrating my application 9i to 10g.
i have 80+ report parameter forms in my application. now i need to change the report server name in following two locations.
1. Report Server Property of Report Object
2. RP2RROREPORTSERVER Parameter property under Parameters node in object navigator.
HOW CAN I CHANGE IT AT ONCE?
Regards,

there is property search option, but it shows only file name only.
i downloaded jform but its not working error is "Could not find the main class. Program will exit!!

Impact of changing a Project Name on PWA 2013

Hi Ladies and Gents
I know that if I change the project name of a current project on the Name field on the PDP it will update the Project Plan name. I also know that I need to change the project site name and I know what the workaround is to ensure that the project plan still
associates with the project site.
What I want to ask, is there any other impact to historic data if I make a change to the above
Have an awesome day
Willem

Hello Willem,
Changing a project name will be fine as the system works off the GUIDs. Test this process on a test project before so that you are satisfied this works for you.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

OEM is not getting started after changing the Server name

Hello DBAs
Recently I installed Oracle database 10g on my a windows machine. It was working fine. Integrated OEM was also working fine.
But now I have changed the machine name. Now Oracle Database has come up after updating the listener.ora & tnsnames.ora files with new server name. But OEM page is not getting open now. I tried after updating the emd.properties and other related file on ORACLE_HOME\sysman folder with the new server name. But no luck.
In windows services one service named *"OracleDBConsoleDbname"* is not getting started, which could be the issue.
Can someone please guide me what can be done to fix this problem.
Thanks
-Naveen

Hi Naveen,
What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
What action needs to be taken if the hostname or SID of the database server is changed?
If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
Eric

How to change Report Server Name???

How can I change my reports server name which is normally generated according to Server Name_OracleHome combination. But can I use a different name for my report server and which configuration files I'll have to change???

How can I change my reports server nameSee Paulo Esteves answer in How to change the Report Server Name?

Changing windows server name for Broadcast Agent

I need to rename my windows server, whick Broadcast Agent is installed. Is there a road map to do this, or any simple way?
Thanks
Fabio Florio

Yes! Thanks.
Sequence of steps to change was so
1. At the URL: http://<sapsolmanhost>:<port>/webdynpro/dispatcher/sap.com/tc~smd~server~agent~admin/SMDAgentAdminApplication
I stop agent (corresponding drop-down menu item on the agent)
2. Produce commands from the console: smdsetup changeservername servername:"name of the server that I need"
3. Produce restart agent, similar to paragraph 1 (a start point in the dropdown menu)
4. Produce Update "Server Name" is similar to paragraph 1 (a start point in the dropdown menu on the agent name in list of agents)

Changing the server name

Hi,
We have our sandbox system in the solution manager and configurations done. Recently we have changed the hostname of the sandbox system viz., xy00yz01 to ab00bc0...now coming to the question...can I change the sandbox hostname in the solution manager so that the pre-existing configuration settings work? Does this work or Is there any alternative?
Thanks and Regards,
Damanaidu J

Hi,
My question was not to change the name of a host server as such...say i have a server with name xy00yz01 and i have changed it to ab00bc01...i have done configuration settings for my satelite system with name xy00yz01in solution manager...now those settings can't be detected by the solution manager as the host name of my satelite system is now ab00bc01...so my question is whether I can change the host name of the satellite system to ab00bc01 from the solution manager setup so that I can all the configuration settings detected.
Thanks and Regards,
Damanaidu J

Can't run Connector, Changes the server name

I am trying to run the Windows 2011 Server Connector on a new PC running 8.1. Never worked with 8.1 before. Connecting on earlier OSs was easy. I am following the same procedure, but the system keeps placing " :65510 " behind the server name. Of
course the ":" is a non-standard character, and it gives me the error message.
Why does it add these characters, and how can I stop it in order to install the 2011 home server "connector?"

Hello Metalplane,
As this issue is related to Windows home server, to receive better support, it is recommended to post in the Windows Home server Forum.
The professionals there will be glad to help you.
https://social.microsoft.com/Forums/en-US/home?category=WindowsHomeServer
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I change my server name (DNS) in Snow Leopard 10.6. ?

I stupidly set my server name to yahoo.com when installing Snow Leopard, and now I cannot get into the real Yahoo. When I try to go to yahoo's site from any browser (Safari/Firefox/Chrome) it cannot find the site (I think it is resolving to my server name). Thanks in advance for any help.

Thank you. I solved my problem by using OPEN DNS, which gave me instructions as follows:
Apple menu;
System Preferences;
Click Network;
Select 1st connection (that I simply deleted--127.something);
Click Advanced;
Select DNS tab;
Add the OPENDNS IP addresses using the + sign at bottom (208.67.220.220 and 208.67.222.222);
Click Apply.

Impact of changing vtp server name

Similar Messages

Maybe you are looking for