Impact of ERP Upgrade from 4.6C to ECC

Hi All,
What is the impact and variations/additons with Impact of ERP Upgrade from 4.6C to ECC from Varinat configuration side.
BR,
Krishna

hi krishna,
You may loose some of the variants becasue of changes happened during upg for ECC600.I have faced certain problems.
I know in the upgrade there is a phase(RSUVAINT(2) not sure) which does a backup of all variants and restores in the end.
regards,
vamshi.

Similar Messages

Information on impact on interfaces due to upgrade from 4.7 to ECC 6.0

Hi friends,
We are upgrading from 4.7 to ECC 6.0. We have some interfaces with the SAP system in our current version.I need information on which of these interfaces will be affected due to Upgrade of the system to ECC 6.0
Mentioned below is the list
SAP R/3 --- CRM 5.0
SAP R/3 --- Xi PAY
SAP R/3 --- Vertex
SAP R/3 --- TEKRF
SAP R/3 --- Virsa
SAP R/3 --- WTX
SAP R/3 --- SOLMAN
It would be really helpful if you can just provide the initial impact analysis for these interfaces due to upgrade.Points will be rewarded.
Thank in advance.
Regards,
Pawan.

Hi
there are several oss-notes available which explain how to transfer your text customizing to the new procedure. This happens if you are uppgrading from a release 4.6c or lower. If you are already in 4.7, there should be no problem with text determination.
Regards
Rauno

Impact on Custom / Std IDOC after upgrading from 4.7 to ECC 6.0

I am in Upgrade project (4.7 to ECC 6.0).
What will be the impact of the existing Custom and Std IDOC after upgrading from 4.7 to ECC 6.0 and if any impact, what are precautionary steps to be taken to work as it is.
Will there be any Impact on ALE also ?
Thanks & Regards
Khaleel

closed.

Error during Upgrade from 4.6c to ECC 6.0

Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar K

Hi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar

Top-Down Distribution - tcode KE28 (release upgrade from 4.6 to ECC 6.0)

All,
we are performing a release upgrade from 4.6 to ECC 6.0 and we have a problem with the tcode KE28.
The variant already set up in the system don't match with the selection fields present in the screen, and the following message is shown:
Message no. KG346
The variant does not adhere to the current Customizing setup
We have saved the variant again, and no problem are present, but the error message refers also to Customizing setup.
Is there a section in the Customizing where it is possible set up the field to show in the initial screen or the new fields (All Valuation Views, Legal Valuation View and Profit Center Valuation View) are due to the release upgrade?
If yes, do you know the transaction/path?
Thanks in advance for your collaboration.
Regards,
Jody Mancini.

Hi Satish,
Now i am sending some URL for Functional upgrade
May be those are all useful toyou
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/
Regards
Surya

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Upgrade from 4.7 to ecc 6.0

hi
it would be great help if you tell me about the upgrade from 4.7 to ecc 6.0 am an sd functional consutlant so wat would be my role in this upgrade and are the transaction codes and menu path same or have some changes in it and could please tell me some sd transaction code and some interview related question wat they ask while taking an upgrade interview for a sd consultant
thanks in advance
priti

Dear Priti,
Visit the following link:
http://solutionbrowser.erp.sap.fmpmedia.com/ .......give source and target versions to find the difference.
Major difference is ECC6 is netwear product having WASJAVA+ABAP secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides.
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack. 4.6C supports NONUNICODE.
http://help.sap.com/saphelp_erp2005/helpdata/en/43/4d2091de9657bfe10000000a155369/content.htm
Hope this will help.
Regards,
Naveen.

OSS notes relevant for FI/CO for upgrade from 4.7 to ECC 6.0

Hello,
I need the list of the applicable OSS notes relevant for the FI/CO module for upgrade from 4.7 to ECC 6.0
Thanks
Sid

Hi,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Please assign points if it useful.
Regards
Ravinagh Boni

ISU upgrade from 4.6C to ECC 6.0 (CIC)

Hello there
We are currently going for an upgrade from 4.6C to ECC 6.0
Can anyone of you provide some insight on whether the frontoffice and other configuration in 4.6C have any kind of impact on ECC 6.0? Basically I can see that there are new functionalities in ECC6.0 for CIC . But will the current config lin 4.6C like action box , move in/out processes, owner allocation etc will be impacted after the upgrade?
Thanks
Gautam

Hi Gothic,
We are also planning to upgrade this month from 4.6C to ECC 6.0. It would be very nicce if we can share the information and the experineces.
We will do the upgrade in a pilot system.
We will have a new hardware with windows server 2003 64 bit and oracle oracle 10.2.0.2.0. than we will install oracle and SAP 4.6C and after that we want to export the Database from the production system to the pilot system. after that we upgrade the pilot system to ECC 6.0 to test first.
I do not know if there is an easyer way to do the upgrade or at least the test. Maybe a homogenouse system copy...?
Best regards
Atik

Upgrade from 4.6b to ECC 6.0 abap changes?

Hi all,
Kindly can any one provide me documentation on upgrading from 4.6 to ECC 6.0 Related to changes in abap code, obsolet functions, etc.
It will be very helpful If you can help me.
Thanking you in advance,

ERP 6.0 has > 200.000 ABAP programs and function modules and other objects, having such "delta list" doesn´t make sense. Would you want to compare the programs one-by-one?
Between 4.6B and ERP 6.0 are many years of development and many many uncountable changes.
Please be a bit more specific what you want to check, then we may help.
Markus

Documents related to upgrade from 4.6C TO ECC 6.0

Hi all,
can anyone send some documents related to upgrade from 4.6C TO ECC 6.0
my emil id is
[email protected]
THANKS
VENKI

Hi Venki,
Please check for the following links for the information on Upgradation from 4.6C to ECC6.0
Upgrade Procedure/Support Packages:
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
SAP Upgrade guide:
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
Upgrade information centre:
Upgrade Information Center [original link is broken]
For Functionality Differences pls refer to the below site - http://solutionbrowser.erp.sap.fmpmedia.com/
From ABAP's perspective, the link below helps you:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
For technical upgrade inputs, check:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
I am sending you a mail too.Please check it.
Reward if found useful.
Regards
Sayee

Upgrade from 4.6 to ECC 5.0 Functional Upgrade

HI Friends,
We are upgrading from 4.6 to ECC 5.0 Functional Upgrade, with New G/L Functionality, i would like to know what are the pre requistics for performing this upgrade and along with check list.
Thanks in Advance
Satish

Hi Satish,
Now i am sending some URL for Functional upgrade
May be those are all useful toyou
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/
Regards
Surya

Upgradation from 4.5B to ECC 6.0

Hi,
We are doing an upgrade from 4.5B to ECC 6.0. any relevant documents are invited.Can somebody help me with procedure.
Documents can also be send to my mail id: [email protected]
Thanks,
Satish.

Dear Satish,
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Upgrading from 4.6 to ECC 6.0

Hello all,
Kindly can any one provide me documentation on upgrading from 4.6 to ECC 6.0 Related to Finance Module.
It will be very helpful If you can help me in the upgrading process of Finance/controlling about the activities Involved.
Email id : [email protected]
Thanking you in advance
cheers
Veena

Dear veena peddineni,
Hope this helps you.
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Interview questions on upgrades from 4.7 to ECC

Hi,
Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0
Points will be awarded.
Thanks

Hi Frank,
this is good question, why because sap upgrades from 4.6b to ecc 6.0 is very risky.
take one example , in 4.5b , me21n application having 620 screen where as in ecc 6.0 having 9000 screen . that time we will take care of it.
check the obsolete function modules , 4.5b , having ws_upload, ws_download.... use cl_gui_frontend_services , under these having differnt type of methods.
once you change the code in ecc , go to tranx : SLIN check the error where it is exact.

Impact of ERP Upgrade from 4.6C to ECC

Similar Messages

Maybe you are looking for