Impact of merging plant B to plant A. Both plants are under the same CoCode

Hello Gurus,
May I request please for your assistance on the query I have. We are about to merge plant B to plant A (when i say merge, we'll also merge all existing SLOC under plant B to plant A), and with that I'd like to know if what would be the impact of this merger. Please note that both plants are under the same company code.
Also, since the plan is to no longer post tansactions for plant B until March, then is it ok to deactivate plant B and it's storloc afterwards? The plan is to complete or close first all open and pending transactions for plant B until March then deactivate it. Is it ok to deactivate it by then? Will it not cause an impact?
Please help and advise. Your inputs would be greatly appreciated.
Thank you very much in advance.
Regards,
Lee T

Hello Ajay,
Thank you very much for your response. I have taken note of it. But could you advise if there's an impact if we activate it? What is the impact on the storloc assigned to it? Where should the deactivation take place? Is it in the plant level or storloc level?
PLease help.
Thank you very much in advance.
Regards,
Lee

Similar Messages

  • Stock transfer between two plants under the same company code at profit

    Hello,
    Hello,
    I have a scenarios. One plant is selling a part to other plant at a margin. Both plants belongs to the same legal entity.
    How can I map this scenario in SAP?
    What will be the cost of my part in these two plants?
    What mechanism I would use to transfer the stock from supplying plant to the buying plant?
    Your urgent reply is appreciated.
    Thanks,

    Hi
    To map this scenario, you should use Profit Centre Accounting.
    Example
    Matl XYZ is to be transferred from Plant 1000 to Plant 2000 at a profit.
    Value of Matl XYZ in Plant 1000 is $100
    Transfer Price: $120
    From FI view point, there would not be any Accounting document as both Plants belong to the same Company Code.
    From PCA view:
    Plant 1000:
    Internal Revenues Dr.  120
    Stock                  Cr.  100
    Profit Margin        Cr.    20
    Plant 2000:
    Stock                                 Dr. 120
    Delivery from Profit Centre    Cr. 120
    Effectively, the value of Matl XYZ in Plant 1000 remains at $100 and in Plant 2000, it is $120.
    Hope this clarifies.
    Thanks

  • STO to transfer material from Stor.Loc. 0001 to 0002 under the same Plant

    Dear friends ,
    Does anyone already have used the new functionlity to transfer material from Storage Location 0001 to Storage Location 0002 under the same plant  with STO ?
    Which delivery  and movement type should I use to do that ? we put a mov. type 311 but errors appear for us.
    best regards,
    Alessandro

    Hi Alessandro,
    You can very well create an STO keeping the issueing and receiving plant as same and mentioning the issue S.location and do the DO using VL10B and PGI using VL02N.
    at the time of GR you can specify the receiving S.location and post the GR.
    There is no any requirement for specific config.
    Regards
    Merwyn

  • MM STO between Plants under the same company code

    Hi experts,
    Please guide on the configuration steps for doing STO between Plants unders the same company code.
    We have company code 100 in that Plants A B & C are theie. Each Plant can do STO to other Plant.
    How to configure this scenario?

    Dear,
    Please follow bellow path
    1. Create a vendor for the Company code of the receiving plant using account group 0007 via T-Code XK01.
    2. In the purchasing data view assign the supplying plant and the schema group
    3. Create customer with the sales area of the vendor.
    4. The shipping conditions, the delivering plant and the transportation zone determine the route in the STO.
    5. In the pricing procedure determination relevant to the STO assign document pricing procedure and customer pricing procedure to get the pricing in the invoice.
    6. Maintain condition records for pricing condition.
    7. Maintain carrier as a partner in the customer master.
    8. In OMGN select the supplying plant and assign the company code and sales area. Similarly select the receiving plant and assign the company code and sales area (The company code to which the plant is assigned to).
    9. Assign the delivery type and checking rule to the document type.
    10. And finally, assign the purchasing document type to the supplying plant and the receiving plant.
    11. Create the STO using T-Code ME 21N and save.
    12. Check for release strategy if any and release using T-Code ME 28.
    13. Create delivery in background using VL10G.
    14. If delivery is created, it is an indication of correct configuration and master data creation.
    Stock transfer between two plants in different company codes is known as inter company stock transfer.
    Material should be maintained in both supplying and receiving plant MM01
    Stock should maintain only in supplying plant MB1C
    Create receiving plant as a customer in supplying plants company code and sales area XD01
    Assign this customer number in receiving plant details OMGN
    Assign supplying sales area in supplying plant details OMGN
    Assign delivery type NB for in combination of supplying/ receiving plants.
    Create STO ME21N
    As it is normal there in the item details we should get shipping date i.e. customer number
    Go for Delivery VL10B
    Shipping point *****
    Select PO go for execute
    then select the delivery then go for delvy ............create delvy,,,, delvy number generated.
    Goods Issue VL02
    Delvy doc **********
    Click on picking
    enter the picking qty
    Click on PGI
    in the mean time check in the PO history you will get the details
    Goods receipt MIGO
    Stock transfers that include deliveries and billing documents/invoices are only possible between plants belonging to different company codes.
    If you want to carry out a cross-company-code stock transport order with delivery but without a billing document, you must set the Relevant for Billing (data element FKREL) indicator in Customizing of the item type to "blank" (Not relevant for billing).
    The following applications are involved in this type of stock transfer:
    ? Purchasing (MM-PUR) in entering the order
    ? Shipping (LE-SHP) in making the delivery from the issuing plant
    ? Billing (SD-BIL) in creating the billing document for the delivery
    ? Inventory Management (MM-IM) at goods receipt in the receiving plant
    Invoice Verification (MM-IV) at invoice receipt in the receiving
    Transfer of goods from one location to another location, it may be between plants within the same company code or in different company code's plants.
    within the company code, but plants,
    receiving plant will raise the STO in Supplying/issuing plant-ME21n,
    Supplying plant will deliver the goods to receiving plants ,
    then we need to pick n post the Goods Issue-VL02n,
    now when we can observe that the STO qty will be added into receiving plant and reduced in Delivering plant,
    To do this, we need do prior customization in SPRO-IMG,-
    material should be created in both plants( receiving & Supplying)
    -maintain the stock only in supplying plant
    -create a dummy customer in supplying plant's sales area(if u have one sales area, create in tat comp code n sales area)
    -assign this customer number to receiving plant's details along with the sales area,
    -Assign the STO doc type(UB) to Supplying plant, along with checking rule
    -Assign the Del type (NL/NLCC) to Supplying n receiving plant.
    Stock Transport Order:
    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b911d43ad11d189410000e829fbbd/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b917843ad11d189410000e829fbbd/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b918543ad11d189410000e829fbbd/content.htm
    u can also use the SAP building block
    with delivery
    http://help.sap.com/bestpractices/BBLibrary/html/P36_IntStockTransDel_EN_IN.htm
    without delivery
    http://help.sap.com/bestpractices/BBLibrary/html/P38_IntStockTransWithoutDel_EN_IN.htm
    Regards,
    Mahesh Wagh

  • We have three Apple devices. They are all have the same name and are on the same apple ID. We would like to back up our Notes to the cloud. If we each create our own Apple email address will they create two separate Notes flies on the cloud or merge?

    We have three Apple devices 2 IPhone 4's and one Ipad2. Only the Ipad2 is running the latest OS. They are all have the same name and are on the same apple ID. We would like to back up our Notes to the cloud. If we each create our own Apple email address (we don't have one yet) will they create two separate Notes flies on the Cloud or merge them?

    Welcome to the Apple Community.
    Separate Apple ID's will result in separate notes. However when you first start with separate ID's unless one of you erases the notes you have, you will both start off with the same set of notes, but from then onwards each set won't sync with each other.

  • I converted a PDF to an excel sheet, but can't sort the data because of not all the merged data are in the same cell?  What do I do?

    I do a sort a converted PDF to an excel spreadsheet?  The merged fields aren't the same...

    Sorry, I don't understand anything.  What means "merged data" and "merged fields"?
    Can you perhaps provide a screenshot of the original PDF, and the resulting Excel sheet?  See https://forums.adobe.com/thread/1070933

  • HT4889 How do I get the files that transferred from my old mac to this new mac to all merge so I am not using 2 set ups? In other words, I have stuff on the "new mac" and everything else on the "old mac" even though they are on the same computer.

    I need to merge my files that were transferred from my old mac to my new mac - for some reason I now have 2 separate setups on my new mac.  I need everything merged to one account.
    Thanks!

    Did you use Migration Assistant? If you set up your new Mac first, you created a user account and when you used MA later, it transferred over the old one. The only way to avoid that is to use Setup Assistant at the beginning of the setup. I used MA once and spent a long time getting rid of duplicates - you can either do that manually or start over: use recovery (Command + R or Command + Option + R keys) during startup, go to Utilities > Disk Utility, erase your disk and download/install again. While going through the setup, use Setup Assistant - it will port over your one and only user account rather than create another.

  • I have two Apple ID accounts, both under the same e-mail address, how can I merge them?

    Because of this I was having trouble transfering some purchased apps. I apparently purchased some apps with a newer apple ID I created with a new credit card (thinking I was only changing the credit card settings from my initial account), yet both are under the same e-mail address. This is also giving me trouble with setting my iCloud account up because it says I need to "verify account" and that it will send me an e-mail to do this, but it hasn't!

    You cannot transfer content between two accounts. The sooner you make the conversion, the better. Just pick the new one and start using it(buying music etc).
    *A lot of people open new accounts when their email changes or they have a new email. You can just access your apple id account and change the primary email that you use to log in along with other details.

  • How do I pull backup files (pictures) from another device to my new device, and merge multiple backups that are on the same iCloud account?  I have an iphone4 and iphone5 backup.  I want to pull photos from both into my new iPhone5

    Have multiple iPhone backups across 2 iPhones and 3 iPads.  I need to pull backup files and pictures off of backed up devices that are not my current in-use device.   How do I do that?  They are all under one apple ID.

    If you still have the devices, import them to your computer (see http://support.apple.com/kb/HT4083), then sync them to your current device.  If they are only stored in backups, the only way to access them is to restore the device to the entire backup.  Note: you can only restore photos in an iPhone backup to another iPhone, and from an iPad backup to another iPad.  If the backups are on your computer, you may be able to extract the photos from the backup using 3rd party software such as iPhone Backup Extractor.

  • HT204150 Contact merge results in contact lost with two iOS iPhones with the same apple ID

    Two days ago it has synced both my contact address book into one and deleted some important contact information from both lists. Is there a way to UNDO / recreate the lists?

    Yes, you stop using the same Apple ID under Settings > iCloud.

  • Impact of Merging multiple company codes into ONE

    Hi,
    We are currently doing a study for a client,  they have the following scenario where the client has got multiple company codes in SAP (due to some tax benefits they had initially created the company codes) now the tax benefits cease to exist and they are planning to consolidate/merge all the company codes into one legal entity. In the existing landscape all the company codes are in the same client. They are proposing to merge all the company codes into an existing company code.
    Trying to understand the impact of merging on SD and would appreciate your thiughts/insights into what could be the important critical impacts of merging and what are the factors to watch out for from an SD perspective. Client has VC and MTO scenarios.
    Thanks in Advance.
    M

    Hi,
    It all depends on your strategy. Will you be creating a new Sales organisations? or continue with the existing one? Also, please check with the client as to how the existing plants in the subsidery company  be treated in the holding company.
    You will have to check the master data, open items, Z programmes & most importantly CIN related settings.
    Hope this is helpful, please let me know if you require further inputs.
    Thanks.

  • Material Ledger not activated in both plants within the same company

    Hi Experts,
    I would like to ask what would be the impact if we activate ML only in one plant. The company code has 2 plants assigned to it. We are currently implementing transfer pricing but only to one plant. What is the impact of activating the PC valuation to other plant under the same company code?
    Thanks

    Hi,
    Usually to add transportation cost or freight to the material cost at the time of STO we will use the seperate pricing procedure & condition types.
    same way we can do one thing..
    1)define the seoerate pricing procedure for STO
    2)include condiion types for mfg cost, transport cost, margin etc etc & define the condition types in such a way that this all condition type values are get added to inventory.
    3)create STO & give values for all condition types in STO
    4)create delivery PGI
    5)create excise invoice
    6)create GRN at receiving plant.
    hope its clear.
    Regds

  • Considering stocks of both plants in special procure. type scenario.-urgent

    Hi dudes,
    Our client is using special procurement type 80(prod.in alternative plant), he is getting planned order in delivering plant as requirement generated by planning plant. while running MRP in both plants, it would consider only the stock of planning plant but not the stock of delivering plant suppose stock is made in delivering plant individually(say manual orders). As the requirement generated by planning plant, the planned order will be generated in delivering plant irrespective of its individual stock.
    can we make the system to consider what ever the stock in delivering plant and create no planned order if stock is there.
    thanks in advance
    Robert

    Robert,
    If that was your requirement why not use Special Procurement key 70 (Withdraw from alternate plant). In this case system only creates reservation and Planning at Supplying plant will be based on the Net requirement calculation considering all recipets, Stock and Issues.
    Regards,
    Prasobh

  • Excisable and Non Excisable plants for the same customer and same material

    Hi All,
    We have a customer who purchases the SAME goods from two different plants, one plant is Excisable and another plant is Non Excisable. So sales area of the customer is same for both the plants. When customer buys from Excisable plant Excise Duties should applicable and when the same customer buys from Non Excisable plant Excise Duties should not be applicable. If I maintain the Excise indicator as 1 in customer's J1ID then Excise Duties are applicable for the customer from wherever he buys the goods.(If he buys the goods from Excisable and Non Excisable plants Excise Duties are flowing).
    So, my query is: if the customer buys from non-Excisable plant, Excise Duties should not flow.
    So I am planning to create a new sales org for Non Excisable plant, then the sales area of the customer will change.
    Is there any other way to over come this issue? Plz guide me.
    Thanx&Regards,
    RAMU

    Dear Ramu
    My suggestion is creating a new sales organization is not  required just to fulfill this excise requirement.
    Let us assume you have two plants
    -  1000 is excisable and
    -  2000 is non excisable
    for material ABC
    Now go to J1ID, select the tab "Material and Chapter ID combination"  and maintain the excise tax indicator for plant 1000 only.
    By doing so, while creating sale order, you input the delivering plant and based on the settings you maintained in J1ID, excise duty will be determined in that sale order.
    thanks
    G. Lakshmipathi

  • Transfer of Inventory from One Plant to another with in the same company code

    Hello All,
    Can you please let us the possible option's for transfer of Inventory from one plant to another plant in different geographical location with in the same state.

    PLANT TO PLANT TRANSFER IN THE DIFFERENT GEOGRAPHICAL LOCATION UNDER THE SAME COMPANY CODE
    Assume - plant 1 - 1000 ; plant 2 - 2000.
    From 1000 - 2000 u shall transfer the parts using 641 movement By creating a Stock transfer order with the following conditions.
    1, Master & source list to be extended for both the plants vice versa. including accounting & excise view
    2. Create an Sto po in ME21n  for one time only /ME31N as scheduling agreement
    3. Generate pick list and do Post goods issue in va02.
    4. Create excise invoice & do the Gate entry in the other plant & stocks are up loaded.
    5. In India excise rules are becoming stingent & you have to inform both the Excise ranges before starting the transactions

Maybe you are looking for