Impact of resetting region in CUCM

CUCM version is 10.5.2. I have created a new region and have done intra & inter region configuration. Now the new region has configuration that affects the existing regions (like max bit rate between the new region & the old regions). I have assigned this new region to a new device pool. Existing regions has its own device pools and there are hundreds of devices in the existing device pools. New region needs to be reset for the configuration to take effect.
My question is - if I reset the new region, what will be the impact. Will it affect the existing devices in the existing device pools. I would like to confirm as this system is in production.

To make it little more clear....
Reg1 --> DP1 --> Device1
Reg2 --> DP2 --> Device2
Reg1 is configured as follows -
within Reg1 - Default audio codec preference list, 64kbps for audio, 384kbps for video, 32256kbps for immersive
Reg1 to Reg2 - Default audio codec preference list, 128kbps for audio, 384kbps for video, 6000kbps for immersive
My question is - if I reset Reg1 (only the region not the DP), will it impact/reset Device2 (in DP2 --> Region2).
Thanks in advance.

Similar Messages

Impact of resetting Sales Invoice Series on SAP

Hi Sirs/Madams,
It would be my pleasure if someone guide me in my assignment. The assignment is for "Resetting Sales Invoices Series from next Fiscal Year, impact of resetting on SAP".
Please help me.
Thanking you,
Rajeshwari

Hi Rajeshwari,
You can use same number range (resetting the current number range) in new FY but it is not suggested. You should change number range as per FY in VN01.
For example: For FY 2013-14 use 714XXXXXXX here 7 is showing Invoice series and 14 is showing FY
Use this type of series you can easily identify FY of the invoice. There is no financial impact of invoice number range in SAP. Hope it is helpful for you.
Regards,
Shatrughan Singh

What impact do changes to the CUCM "Default Credential Policy" have?

Hi all,
We have been asked to make an update to the 'Default Credential Policy' on CUCM 6.1. The update is easy enough to carry out: User Management > Credential Policy > Default Credential Policy.
However, Cisco documentation isn't too clear as to what accounts this will impact. As best i can tell any changes made here will impact any 'new' Application or SuperUser (etc) accounts that are created *after* the policy is updated. Existing application accounts won't get impacted and would require a Bulk Upload to change them. Does that sound correct?
I'm also a little unsure if changes to this policy will impact the 'administrator' account that we created when we installed CUCM, or any of the normal 'phone' user accounts that our many IP phone users have (i presume not, but again Cisco documentation doesn't seem too hot on precisely what gets impacted by changes to this policy).
Screenshot below of the GUI screen i am referring to.
Thoughts appreciated.
Many thanks!

Quick bump. We've read a few links that suggest User and Application User passwords etc would be impacted. However, they don't mention the main Administrator account, nor if we would need to use Bulk Upload to change existing User and Application User settings after chaning the Default Policy settings:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/b08crpdf.html#wp1064073
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b08crpol.html#wp1030222
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b08crpdf.html#wp1055303
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080a57c4c.shtml
Ironically, a Google search for "CUCM Default Credential Policy" now lists this post as the fifth most significant one when trying those search terms doh!
Any thoughts appreciated.
Thanks

Reset pagination

Hi.,
I am using a link in my bar chart. In the new page there is showing a report. I need to give reset pagination for that page so that whenever I enter there by clicking the link it should display the the first 'n' set of records. I have tried to create an unconditional branching to the new page in which I have given the reset pagination. But in my first page I am using a button which is just submitting and showing the same page. As I have given the branching it is going to the new page when I click the button. Can anyone help me to resolve this.?
Any help will be appreciated.
Thanks & Regards
Charls

Hi,
Please see URL syntax
http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21674/concept_url.htm#sthref105
In URL you can reset pagination
>
ClearCache:
To clear cached items on a single page, specify the numeric page number. To clear cached items on multiple pages, use a comma-separated list of page numbers. Clearing a page's cache also resets any stateful processes on the page. Individual or comma-separated values can also include collection names to be reset or the keyword RP, which resets region pagination on the requested page. The keyword APP clears cache for all pages and all application-level items in the current application and removes sort preferences for the current user. The keyword SESSION achieves the same result as the APP keyword, but clears items associated with all applications that have been used in the current session.
>
If you report is interactive, use RIR or CIR instead of RP
Regards,
Jari

Clear region caching

hi,
any process that removes cached report from cache?
0.20: ...Cache found, " length="37730" generated 1,042 seconds agocache is ok just it does not work with SEARCH region, would like to reset regions cache when search conditions have changed.
found one idea: apex_util.cache_purge_by_page, but it does the same as session state processes. region is still cached.
Simon

Hello,
The way I handle this sort of thing is to have an after-login process that reads from a configuration table that essentially contains a timestamp of the last change to the configuration tables (say 3 days ago). So once (and only once) when the user logs in, you know how recently a change was made to one of your configuration tables.
You can now compare the date of this change with the date of the cached areas (by using the routines in the APEX_UTIL package) which then allows you to purge the cache if necessary.
Hope this helps (I can post some code if I haven't explained this very well).
By the way, caching is one of the most overlooked areas in APEX, hardly anyone seems to use it and yet it's such a useful feature so nice to see someone else using it ;)
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Changing regional settings site/site collection/farm level

Went through existing articles. None exactly explains our issue.
http://social.msdn.microsoft.com/Forums/en-US/18329838-b3a1-456b-8abe-7c8dbca2e1fd/change-regional-settings?forum=sharepointadminlegacy
http://social.technet.microsoft.com/Forums/sharepoint/en-US/18329838-b3a1-456b-8abe-7c8dbca2e1fd/change-regional-settings?forum=sharepointadminlegacy
http://social.msdn.microsoft.com/Forums/en-US/f11bd14c-aa16-4be2-bbc5-df1a1cca54e3/getting-error-changing-regional-settings?forum=sharepointadminlegacy
http://social.msdn.microsoft.com/Forums/en-US/4cc28f9e-9036-49aa-80d1-4148670c7266/impact-of-changing-regional-settings?forum=transactsql
Our issue:
all sites in the site collection had local regional settings. index columns were in use. in order to change each site regional settings we need to first disable index colums.
suddenly the farm administrators forced a policy that set all site collection to english regional settings. what happens to sites that were forced to change regional settings.
we use infopath form based solution and there was strange change in behaviour as a result. but this is not an issue for this thread.
are index colums still ok after the forced change?
can we force back the site collection/farm regional settings back to local and all is ok?
should we disable and enable again all index colums?
how is it that site change does not allow regional settings change and farm/site collection change allows it?
thanks in advance!

Called MS support and here are the proposed solutions for this problem
http://community.office365.com/en-us/f/154/t/11887.aspx
Please ensure the "Sort Order" option is chosen "General". After that, your "Locale" will be changed successfully.
Error when you change the locale setting for the SharePoint Online public website
http://support.microsoft.com/kb/2824721
http://social.technet.microsoft.com/Forums/sharepoint/en-US/18329838-b3a1-456b-8abe-7c8dbca2e1fd/change-regional-settings

Cisco 9971 phone over VPN

Hi
I am trying to set up a anyconnect VPN for Cisco 9971, so that I can use it at home. the tunnel has up, I've tested it but Phone got the following error message:
11:56:11 Updating Trust List
11:56:11 Trust List updated
11:56:12 SEP0011111111.cnf.xml.sgn (HTTP)
11:56:13 VPN Error: VPN is not Configured.
12:14:40 Reset requested by CUCM
12:15:14 DNS Timeout
12:15:14 Updating Trust List
12:15:14 Trust List updated
12:15:15 SEP0011111111.cnf.xml.sgn (HTTP)
12:15:16 VPN Error: VPN is not Configured.
Any help would be appreciated.
By the way, this is a SIP phone.

Hi,
You can purchase the phone proxy license. This elimiates the need to build a VPN tunnel for voice traffic.
It is not mandatory to purchase this license however.
From the ASA configuration guide:
http://www.cisco.com/en/US/docs/security/asa/asa83/configuration/guide/unified_comm_phoneproxy.html#wp1144845
"The Cisco Phone Proxy on the adaptive security appliance bridges IP telephony between the corporate IP telephony network and the Internet in a secure manner by forcing data from remote phones on an untrusted network to be encrypted. "
Don't forget to rate all posts that are helpful.

IPhoto: solution when "buy book" generates an error.

Hello all,
I thought I post this. Maybe this will help others who face the same problem.
I created a book in iPhoto. After clicking the "Buy Book" button, I received the message:
     <i>There was a problem contacting the Apple online store. Please try again.</i>
I searched the internet and found several other people having the same problem.
Several solutions were also given like:
     1. Temporarily tun of the firewall
     2. Be sure the select, in Preferences in iPhoto under Advanced the book store that matches the country of your Apple ID
     3. Be sure to have the correct and valid credit card data entered in your Apple ID
     4. Be sure the password of your Apple ID is correct
     5. Go to iTunes, "purchase" a free App and if you are prompted to accept Apples policy, do so and try again to buy your book
     6. Apple online store may be down or to busy, try again on a different time.
However, none of these solutions worked for me.
After digging further I finally found the solution (at least for me).
If you have ever made, in System Preferences => Language and Text, under Formats any change, than "Region" will show "Customized" instead of your country. I live in the Netherlands, the default for short date is to show years in two digits. I changed this once (in the past) to show dates with four digits years.
Resetting "Region" to match the country of your Apple ID did the trick.
I was then able to order my book in iPhoto.
Kind regards,
emeu1

Try the iPhoto community forum.

Change of address for existing Plant -

Hello,
The requirement is to change the address for an existing Plant. Is this opkay to do - does this impact any other MM/Production processess.
Thanks,
RT

Hi,
Change in address will not impact on anything except the TAXES
In address detail country,region and tax jurisdiction is maintained and this fields area in use for calculation of tax then it will impact.
If region and tax jurisdictions is not in use for tax calculation then you can change.
kapil

Need Analysis

Hi All,
I want to add another extra field in FI_AP - EDW layer DSO, what will be the impact over FI_AP - Regional DSO??
Asish

I guess i have found the reason why my authorization dosen't work. I don't activate infoObjects 0TCA* and 0TCT* and infoCubes 0TCA* as well. But another thing I am confused about is :
Should I activate HR and CO businees content for authorizations 0TCA_DS02OTCA_DS05 and 0CCA_O010CCA_O03 before i get started? or should i run generation everytime i create a new authorization using Maintenance in Rsecadmin?
Haifeng

OPTIARC DVD RW AD-7170A issues with reading DL DVDs

Hi,
I just wanted to let you know, that after unsuccsesful lens cleanings I did the fw flash.
I have a MacPro3.1 on 10.5.8 OSX. I used the http://liggydee.cdfreaks.com/page/en/Optiarc-AD-7170A/ 102cbt_rpc1.bin bin file for flashing the drive. And flashed it with the http://binflash.cdfreaks.com/ Binflash utility within the terminal.
Here are the results:
BEFORE FLASH
OPTIARC DVD RW AD-7170A:
Firmware Revision:    1.NC
Interconnect:    ATAPI
Burn Support:    Yes (Apple Shipping Drive)
Cache:    2048 KB
Reads DVD:    Yes
CD-Write:    -R, -RW
DVD-Write:    -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:    CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Type:    DVD+R DL
ID:    MKM 003
Blank:    No
Erasable:    No
Overwritable:    No
Appendable:    Yes
Write Speeds:    2.4x, 4x, 6x, 8x
AFTER FLASH
Optiarc DVD RW AD-7170A:
Firmware Revision:    1.02
Interconnect:    ATAPI
Burn Support:    Yes (Generic Drive Support)
Profile Path:    None
Cache:    2048 KB
Reads DVD:    Yes
CD-Write:    -R, -RW
DVD-Write:    -R, -R DL, -RAM, -RW, +R, +R DL, +RW
Write Strategies:    CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Type:    DVD+R DL
ID:    MKM 003
Blank:    No
Erasable:    No
Overwritable:    No
Appendable:    No
Now everything works! Shame on the Apple, that users have to solve Apple's problems on their own...

I've been trying with the above mentioned tools to no avail. I keep getting a 'command not found' reply in terminal. I've double clicked on the Binflash utility and it listed the commands in terminal
Last login: Wed Nov 7 11:17:26 on ttys001
macpro-5:~ #########$ /Users/########/Downloads/necflash ; exit;
Binflash - NEC version - (C) by Liggy and Herrie
Visit http://binflash.cdfreaks.com
Usage:
necflash {-scan} [-v]
necflash {-dump} [-v] [-s] {filename} {device}
necflash {-flash} [-v] [-s] {filename} {device}
necflash {-identify} [-s] {device} {Filename}
necflash {-querybt} {device}
necflash {-setbt} {Mediatype} {Booktype} {Temp|Perm} {device}
necflash {-setbtrw} {Booktype} {Device}
necflash {-clearbt} {device}
necflash {-queryrpc} {device}
necflash {-resetrpc} {device} {Vendor|Global}
necflash {-version}
-scan     - Scan for supported devices
-dump     - Dump firmware and write to file
-flash    - Flash firmware and write to file
-identify - Identify unknown drives
-querybt - Query booktype information
-setbt    - Change booktype settings
-setbtrw - Change booktype on current DVD+RW disc
-clearbt - Clear booktype settings and counter
-queryrpc - Query region status
-resetrpc - Reset region counter on RPC2 drives
-version - Display version information
-v     - Verbose mode
-s     - Skip disclaimer
logout
[Process completed]
and said logout. I logged out and in again and tried the commands with the below results.
macpro-5:~ ####### necflash {-scan} [-v]
-bash: necflash: command not found
What am I doing wrong?
Cheers
Lars
MacPro 3,1
OPTIARC DVD RW AD-7170A:
Firmware Revision:          1.NC
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          To show the available burn speeds, insert a disc and choose File > Refresh Information

SSM10 update fails with tuned signatures

Hi out there
I have a problem with a SSM10 module in a ASA5520 which has got the signature tuned - there is a lot of tuned signatures defined on it under active signatures - and this is split on three vs.
For some time the signature update has started failing - since 690.0 - I have been running a tac case on it and they told me to reset all tuned signatures to default settings. Well - after I did this I was able to update again - but now are my signatures in default settings. Since no-one can remember here why there where modified (and maybe a bit poor documentation on what had been done) I am not sure what impact the resetting has so of course I would prefer to restore the settings as they where before my update. But accourding to the tac engenieer I cannot backupå and restore the tuned values ? Can this be - what is that with that tuned values are not "supported" ??
best regards ti

There is no way to back to the custom values, because well...they were custom.
The unit is not going to keep trace of those changes, so that is lost forever.
The signatures on the unit can be tunned depending on the scenario and customer's requests, so if a signature is tunned or created, cisco can't really guarantee it will work as you want.
Cisco can do that with default-configured signatures.
Next time you do something that radical, create a backup of the config.
This applies for any device.

WSUS Hangs on "Unused updates and update revisions"

In our environment we have not cleaned up WSUS updates in a while, probably about a year. I have been tasked with cleaning it up and optimizing it. When I attempt to run the WSUS Server Cleanup Wizard, it hangs on "Unused updates and update revisions"
and doesn't do anything. The wizard then disappears and I am taken back to the WSUS Console where I see the following:
Error: Database Error
When I click copy error to clipboard, this is what is copied:
The WSUS administration console was unable to connect to the WSUS Server Database.
Verify that SQL server is running on the WSUS Server. If the problem persists, try restarting SQL.
System.Data.SqlClient.SqlException -- Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Source
.Net SqlClient Data Provider
Stack Trace:
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at Microsoft.UpdateServices.UI.SnapIn.Wizards.ServerCleanup.ServerCleanupWizard.OnCleanupComplete(Object sender, PerformCleanupCompletedEventArgs e)
In my research, I have found several solutions, and have tried a few of my own. Below I will list the ones I have tried:
1. Run each item individually. IE, run superseded updates, then run expired updates after that finishes, then run unneeded update files after that finishes, etc. This did not work
2. Stop the WSUS IIS service and run "wsusutil.exe removeunneededupdates" this also did not work
The solutions I have found, but am hesitant to try (due to the fact that we are in a live production environment) are the following:
1. Re-Index the WSUS Database according to the following link:
https://technet.microsoft.com/en-us/library/dd939795(v=ws.10).aspx
2. Deleting the files in the WSUS folder and running "wsusutil.exe reset" from the following link:
http://windowsitpro.com/windows/quick-tip-resetting-wsus-server
I would like to know what, if any, impact either of these solutions will have on our environment, and which one would be the preferred method. I feel like I should use the first one, and if I still don't have any luck then try the second. My only concern
with the second method is that it might break something (not sure what, except updates).
A little about our environment - 8,000 computers, WSUS and SCCM are on the same Server 2008 R2 server, we only have the one WSUS and SCCM server, so nothing downstream as far as WSUS is concerned.
Thanks everyone!

UPDATE:
I have started going through and declining updates, and then going through SCCM and removing any expired updates from the SCCM side as well. I am now down to 3822 unapproved updates in WSUS, with a total of 13304 updates.
At this point I am STILL UNABLE to run the cleanup wizard to clean up any of these. It still hangs when it runs, and only on Unused Updates and update revisions. I have even tried running powershell scripts and command line utilities to clean WSUS up, and
still just hangs. I am pretty much at a loss, so any other advice would be appreciated.
One more question, should it resort to this: What impact does resetting WSUS have on a live environment, with 7000 plus computers? Should I have to resort to it, is this something that is going to cause any major issues?
We do plan on preventing this in the future by running the database defrag once a month, and running the WSUS Server Cleanup Wizard once per quarter, but getting there sure is proving to be quite the challenge.
Thanks again!

Qosmio G20: 1x recording speed on 16x Datasafe DVD-R

OK, I normally buy Verbatim and have never had a problem. Took the chance on a cheap tub of DATASAFE 16x speed DVD-R and can only write at 1x speed. The manufacturer ID: CMC MAG. AM3.
The drive is a Mat****a DVD-RAM UJ-846S, Firmware F101 , serial number BD027ED1. The firmware date is 21-09-05 so nearly a year old. Obviously I don't expect to write at 16x speed but 8x speed would be fantastic. Hardware Qosmio G20.

> Don't talk rubbish, of course older hardware will
> never be as fast as newer hardware but DVD
> manufacturers are releasing new firmwares all the
> time to cope with new discs. I've just upgraded my
> USB2 external Sony DRX-500UL to firmware 2.1a today
> which will auto-reset region changes and let me burn
> at 4x speed. The fastest the hardware is capable
> of.
>
> A Mat****a UJ-846-S (Panasonic UJ-846-B) should be
> faster than a 4 year old Sony DVD drive!
Sir...,If you already know the answer,why you have sent the question to this forum?
The Mat****a UJ-846-S is not slower, but since it also writes the RAM discs,it's more critic when it has to write rubbish discs.
However, if you lose 5 minutes to read the manual, as I have already said, you will have all the information that serve you.
ADIOS.

SQL Query (report region) without full page reset

Hello,
I have a page with several items, some of them with default values, and a report region, performing SQL query based on one of the items text field (always submits page when Enter pressed). When the page submits, the HTML DB engine performs and display the query, but at the same time, reset the other page items to their default values.
Is it possible to run the query without the HTML DB reset the item values to their default state?
Thanks,
Arie.

Hi Peter,
Well, this is not exactly the case. I have an Item File Browse which defined as "Only when current value in session state is null", and a HTML text region, which contain Iframe, with default src tag (which I'm changing, using JavaScript, prior to the running of the SQL query). After running the query in a report region both the item and the Iframe reset to their original state.
Any Ideas on how to prevent that?
Thanks,
Arie.

Impact of resetting region in CUCM

Similar Messages

Maybe you are looking for