Impact of running dcmctl resetHostInformation

Hi all,
Just wondering, what is the exact impact of running dcmctl resetHostInformation ?
I have a working infra and a working midtier, however, the midtier is not accessible from EM because it's listed as localhost.localdomain. Oracle support claims it was installed this way but it was not.
So im wondering, can I run emctl resetHostInformation on the midtier only or do I have to run it on infra too?

Hi Murugesh,
As mentioned by Giuseppe the PTO carryover process will always recalculate the latest balance, but it is always recommended to follow a cut-off date till which you allow employees to apply and get all the leaves approved. Post that cut-off date you block the previous year leave application in system and run the carry-over process.
Thanks,
Sanjay

Similar Messages

Impact of running DBMS_STATS.GATHER_DATABASE_STATS online

Hi,
We're fairly new to DBA with an Oracle 9i database and have been having problems with performance. A lot of the querys were using full table scans instead of indexed scans.
We copied the database to our test database and ran the DBMS_STATS.GATHER_DATABASE_STATS() procedure and lo and behold the queries started using the indices again!!!
We now want to run this procedure via the Oracle Enterprise Manager but are unsure as to the effect that running this procedure will have with our users being logged in at the same time. Is it safe to run this procedure with the users logged on? We are not overly fussed if the users suffer reduced performance in the short term as in the long term they will have much improved performance.
Thanks
Tony

Hi all,
Tony has now gone on holiday for a week. We tried running the DBMS_STATS.GATHER_DATABASE_STATS() via Oracle enterprise manager on the live database last night with no users logged on. it failed with the following errors
ORA-04045 - errors during recompliation/revalidation of sys.dbmd_stats
ORA-06508 - Program being called not found
ORA-06512 - error on line 2
The database and application is supported by a software vendor who claim this is an Oracle bug which is being investigated, the package does however function perfectly on the test database on the same cluster. This test database was rebuilt two days ago using export and import from the live db. I could be wrong but based on some of the claims they have made in the past it seems unlikely. Could this be more of a permissions problem or that the target stats tables are not in place?
What would be the impact of running
ANALYZE TABLE schema.table COMPUTE STATISTICS;
against all tables with users logged on and would this be as effective as the dbms_stats package.
Thanks in advance
Dave.

Impact of running F.28 / RFDKIL20

Dear all,
        What would be the impact of running the transaction F.28 or report RFDKIL20? Would thouse released sales order be blocked again?
Thanks

F.5D prior to 1KEK
Dependent functions
    Readjustment must be carried out prior to creating a business area
    balance sheet.
    Profit Center Accounting also requires the results of readjustments.<a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/eb/1376b443c411d1896f0000e8322d00/content.htm">SAP's relevant section of documentation!</a>
<a href="http://www.sap-basis-abap.com/fico/sap-fi-month-end-and-year-end-activities.htm">Period end activities in order!</a>

Is any impact on running instance?

Hai,
curently 12.0.4 instance was running on RHEL ES relese 4 ( nanahant 5) 32bit.
know i am planning to upgrade 32 bit to 64 bit. is any impact on running instance if i upgarde o/s 32 bit to 64 bit.
Regards
DBA

Make sure you relink all executable files/programs once you do the upgrade and before starting the services.
Note: 471566.1 - Migrating Oracle E-Business Suite R12 from Linux 32-bit to Linux 64-bit
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=471566.1

Impact of Running COGI program for every two HRS...

Hi,
As per requirement in my business scenario, we have lot of materials with negative stocks currently.
Now for physical inventory purpose, customer wants us to remove these negative stocks and want us to run COGI program every 2 hrs.
As we are going to deactivate negative stocks for all materials, the error due to goods movements will get accumulated heavily in COGI.
For countering this previously they were monitoring COGI once in a day.
Now we have decided to schedule COGI in background job for every 2HRS.
Is there any impact on system from PP prospective if we run COGI for 2hrs daily.
Your view points will be highly appreciated.
Rgds,
Yogesh...

Hello Yogesh,
it is not possible to schedule COGI (report CORUAFFW) in background.
But you may schedule report CORUAFWP (which was designed for background running) with option "failed goods movements" in order to clear your COGI records.
There is no real impact, however, if there are that much records in COGI, you should schedule it for a time with low business in order to avoid lock errors.
Regards,
Andreas

Impact of running autoconfig on SSL setup

Hi,
I have SSL setup in production and need to apply the latest autoconfig patch there. Can you please advice if running autoconfig will impact the current SSL setup in any way?
My EBS version is 11.5.10.2 with 10.2.0.4 database. I have a multinode configuration with Web and forms server on one node and Database, reports, concurrent and admin server on the other.

user503988 wrote:
Hi,
I have SSL setup in production and need to apply the latest autoconfig patch there. Can you please advice if running autoconfig will impact the current SSL setup in any way?
My EBS version is 11.5.10.2 with 10.2.0.4 database. I have a multinode configuration with Web and forms server on one node and Database, reports, concurrent and admin server on the other.AutoConfig should not impact your SSL setup, as long as you followed these MOS docs to implement SSL and have all the context variables set properly.
11i: A Guide to Understanding and Implementing SSL for Oracle Applications [ID 123718.1]
11i: Troubleshooting SSL with Oracle Applications [ID 300969.1]
Thanks,
Hussein

What is the possible impact of running BDLS in wrong client?

Hello,
I've been doing a system refresh from PRD to QUA and as a part of post refresh actions I've run BDLS for each client I have in the system. That system has 4 clients (500,600,700,800) so I've run BDLS 4 times (PRDCLNT500 -> QUACLNT500, PRDCLNT600 -> QUACLNT600, PRDCLNT700 -> QUACLNT700, PRDCLNT800 -> QUACLNT800). The problem is that I've run all four reports from the same client (500).
When BDLS finished and I've been checking the spool reports I found out my mistake - there were over 5.000.000 updates in correct report (PRDCLNT500 -> QUACLNT500) and only 3.000 updates in wrong ones (all other reports).
After this I've started BDLS for the remaining clients (600,700,800) correctly.
<b>The question is - could there be any possible impact on data consistency?
If so - what impact could I expect?
Would be wise to run the BDLS reports in inverse mode (changing the logical names to the original ones) in client 500?</b>
Here is some information that can help - tables with amount of modified records:
BDSX_CON04*                    LOG_SYSTEM                             1                      1
ROIDOCPRMS*                    SLOGSYS                                1                      1
ROOSGEN*                       RLOGSYS                                0                      0
                               SLOGSYS                                1                    201
ROOSPRMSC*                     RLOGSYS                                0                      0
                               SLOGSYS                                1                      3
ROOSPRMSF*                     RLOGSYS                                0                      0
                               SLOGSYS                                1                      4
RSBASIDOC*                     RLOGSYS                                0                      0
                               SLOGSYS                                1                      1
SRRELROLES                     LOGSYS                                 1                  2.040
TBTCO*                         RECLOGSYS                              1                      1
EDIDC                          RCVPRN                                 0                      0
                               SNDPRN                                 1                    780
EDP21                          SNDPRN                                 1                      3
EDPP1                          PARNUM                                 1                      1
T076B                          KONTO                                  1                      1
T076M                          KONTO                                  1                      1
T076S                          KONTO                                  1                      1
I expect that all tables marked with star (client independent tables) have no impact (they would be changed anyway).

Thanks. I got similar response from other SAP experts I've consulted. But I do not understand what are the changed records? If there would be no changed records - I would agree there is no impact. But when I've by accident changed 3x3000 records - it is hard to belive that there is absolutely no impact.
Can you please explain?

Error running: dcmctl resyncinstance

Hi
I get the following exception when running the dcmctl resyncinstance command. I'm use this command because I cannot 'undeploy' webapplications under the 'home' instance. Any ideas, please?
"See base exception for details.
Base Exception:
java.io.IOException:The system cannot find the path specifiedSee base exception
for details.".
Resolve the indicated problem at the OracleAS 10G instance where it occurred then resync the instance
java.io.IOException: The system cannot find the path specified at java.io.WinNTFileSystem.createFileExclusively(Native Method)
at java.io.File.createNewFile(File.java:828)
at oracle.ias.sysmgmt.repository.plugin.orionp.ApplicationTreeBuilder.in
it(Unknown Source)
at oracle.ias.sysmgmt.repository.plugin.orionp.ApplicationTreeBuilder.co
mmit(Unknown Source)
at oracle.ias.sysmgmt.repository.plugin.orionp.ApplicationCollection.com
mit(Unknown Source)
at oracle.ias.sysmgmt.repository.plugin.orionp.CollectionDispatcher.comm
it(Unknown Source)
at oracle.ias.sysmgmt.repository.plugin.orionp.OC4JInstanceManager.commi
t(Unknown Source)
at oracle.ias.sysmgmt.repository.plugin.orionp.PlugInImpl.commit(Unknown
Source)
at oracle.ias.sysmgmt.repository.DcmPlugin.commit(Unknown Source)
at oracle.ias.sysmgmt.repository.PluginCollection.commitResyncPlugins(Un
known Source)
at oracle.ias.sysmgmt.repository.RepositoryImpl._syncUpFromPersistence(U
nknown Source)
at oracle.ias.sysmgmt.repository.RepositoryImpl.syncUpFromPersistence(Un
known Source)
at oracle.ias.sysmgmt.configsvc.ConfigurationServiceImpl.syncUp(Unknown
Source)
at oracle.ias.sysmgmt.task.ConfigAdapter.resync(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.internal_resync(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.resync(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.ClusterManagementInput.execute(U
nknown Source)
at oracle.ias.sysmgmt.clustermanagement.ResyncInput.execute(Unknown Sour
ce)
at oracle.ias.sysmgmt.clustermanagement.ClusterManager.execute(Unknown S
ource)
at oracle.ias.sysmgmt.task.ClusterManagementAdapter.execute(Unknown Sour
ce)
at oracle.ias.sysmgmt.task.TaskMaster.execute(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMasterReceiver.process(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMasterReceiver.handle(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sync_evaluate(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.internal_evaluate(Unknown Source)
at oracle.ias.sysmgmt.task.RemoteEvaluate.execCommand(Unknown Source)
at oracle.ias.sysmgmt.task.DaemonWorker.run(Unknown Source)

Thank you for the reply!
I'm running from c:/oraclehomemiddle/dcm/bin
I have installed both instances, being c:/oraclehomeinfra and c:/oraclehomemiddle. What is the fastest(easiest) to reinstall the c:/oraclehomemiddle?
Is it possible to reinstall it on top of the old installation?

Publishing a Workflow - Does that impact already running workflows

I created a workflow in SharePoint Designer 2010. It gets fired when on a change event in a Document Library.
If I modify and publish the same workflow. Will that impact the existing workflow that is running?
Thanks
Mayank

Based on my testing, the running instances will still work after you publish a new version of the workflow. When you start a new workflow in the list, the newer version workflow will run".
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

UCCX 10 - running Finesse and CAD simulatenously

Cisco's documentation indicates that CAD and Finesse cannot be run at the same time and that one has to deploy/use either CAD or Finesse. However, the CAD service is never shut down when Finesse is activated and remains running. On my test server, I was able to have both, CAD and Finesse, running and have agents use both clients on the same server.
Is there any additional information that explains in more detail the impact of running CAD and/or Finesse and why they can't be run at the same time? Or if they are, what the side-effects and possible negative impacts?
After I have upgraded to UCCX 10, I would like to gradually switch users over to Finesse. But instead of forcing everyone to switch to Finesse at the same time, I would like to switch one department at a time so I can work out any issue with a small subset of users first. Does anyone have any experience with this?
Thanks.

HI,
Pls see the below question and Answer from UCCX Chalk-Talk UCCX 10.
4:Since from UCCX 10 , we can only use either CAD or Finnesse at one time, whats the impact of changing this after some time in production, let say , i used CAD for 2 months and then i decided to move to Finesse, whats the impact ? or is it a smooth change as switching CUIC and HRC in previoius release ?
Ans.For the scenario you mentioned, there is absolutely no problem. The point to note is that the Finesse services are activated/deactivated but the CAD desktop services are ALWAYS running. The only condition to keep in mind is that you can use ONLY ONE type of agent desktop at any time. Also if Finesse is not used and CAD operations are used extensively, it is advisable to shutdown the Finesse service.
Regards,
Mukesh Singh

Cost Estimate Run

Hi Gurus,
Please tell me why we run cost estimate and what is the use of it.
What are impacts of running cost estimate?
Please revert asap.
Thank You

Hi,
Cost Estimate is runned to calculate the Cost of Goods Manufactured or Cost of Goods Sold for your Materials and Update the prices in Material Master.
You have different ways of Calculating your COGS and COGM in SAP.
The Important methods are
Cost Estimate With Qunatity Structure and Without Quantity Structure.
In Cost Estimate With Qunatity Structure you will not have the option of entering the lot size for your Cost Estimation. It will be automatically determined from your BOM and Routing.
Whereas In Cost Estimate Without Quantity Structure you need to manually enter the Quantity at the time Cost Estimation.
With Regard to Impact of Cost Estimates.
While Running the Costing Run you have to Mark or Release your Cost Estimation results inorder to Update the prices in Material Master record.
Hope I have briefly given an idea baout Cost Estimates and its impact.

BI Unicode Conversion impact on Microsft office tools

Hello Friends,
The BI version is BI 7.0, but we are using both Bex 3.x and Bex 7.0.BI 7.0 is being Unicode converted.
Questions
Does Unicode conversion have any impact on running the new/existing reports in 3.x and 7.x
Does Unicode conversion have any impact on running the new/existing WAD reports.
Does Unicode conversion have any impact on any of the Microsoft office products used by BI.
Thanks!

Since Excel is the starting point for BEx Analyzer, Excel 2007 would need to be tested. In BEx Web, if you have Excel as a save as option for queries, you will need to test that too. It also requires that the .NET Framework 3.0 be on the end user machine.
See [OSS Note 1013201|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1013201]

Help with running DTPs in parallel

Hi,
I'm running the hjstory loads for Material Movements(2LIS_03_BF) in BI7.0. I'm running a delta DTP with get request flag checked. I've also defined 4 parallel processes for the load. My problem is the following :
1. Only one data packet at a time is getting processed. Its not processing packets in parallel. Is this normal behaviour, if not please let me where to look for rectifying the same.
2. What is the impact of running a Full DTP with filter criteria by posting date in parallel with the DTP already running.
Thanks,
Kedar

Hi Kedar,
We faced an issue where we noticed that even though there were Dialogs available, still the processes were waiting for a long time. Later, we found that the basis team had specified a setting and restricted the number of Dialogs being used by the loads (for the sake of not exhausting the dialogs incase someone wanted to go into the system for debugging something)
Not sure if you have a similar situation.
Thanks,
Ashish

PP/CO issue - Costing Run.

Dear SAP GURU,
Understand that there's Material Cost Estimate Without Quantity Structure.
Really appreciate you guy can share the following :
From CO/PP Point of view,
1) Can we Costing run without BOM but with Master Recipe ? Since there's Work Center & Activity type.
2) Before Costing Run , What if Production made misstake created , Release & Confirm the Process Order ?
3) Cost Estimate with Quantity is to calculate non-order-related, What if Order related ?Should we use Cost Estimate witout quantity structure?
From PP Point of view,
4)What's the major problem that will affect the BOM Explosion during costing run ?
5) What is Major issue will impact Costing Run (beside Master Data) ?
Thank you.

Dear,
Don't ask too many questions in one thread also this thread is relevant for CO forum So please use correct forum.
1) Can we Costing run without BOM but with Master Recipe ? Since there's Work Center & Activity type.
Yes you can.
2) Before Costing Run , What if Production made misstake created , Release & Confirm the Process Order ?
See In this case system will do the valuation as per the price given in material master.
3)What's the major problem that will affect the BOM Explosion during costing run ?
There could be many problem but few listed problems are Lot size validity date, Status of BOM. Cost relevancy indicator.
4) What is Major issue will impact Costing Run (beside Master Data) ?
Same as per question 3.
Hope it will help you.
Regards,
R.Brahmankar

Central Management Server - where do queries run

I want to monitor performance on a couple remote servers by running DMV's repeatedly.
Is it it possible to run queries on the CMS against remote servers, and store the results in a CMS table?
This might be obvious, but sorry I need your help in understanding... When you run a multi-server query on a CMS, where does the query actually get optimized and ran? On the remote server, or on the CMS itself. I.e., what CPU is
execuing the query? Where does the query get cached? On the remote or CMS? My thinking is that I don't to put additional workload of the monitoring queries on the remote server. Eventhough the impact of running DMV's is said
to be negligible, running many of them repeatedly must put some extra burden on the target server.

Hi District,
Central management servers store a list of instances of SQL Server that is organized into one or more central management server groups. After you create a central management server, one or more server groups, and one or more registered servers,
you can execute queries against a whole group at the same time, however, Central Management Server cannot be a member of a group that it maintains. So when you run DMV statement of remote servers , it could not save the results into your Central management
servers. Meanwhile, actions that are taken by using a central management server group act on all servers in the server group. When you run multiple queries on a Central management server, the queries actually are run on all servers in the server group. If
you want store the results about remote servers in the Central management server, I recommend you using linked server or set up a SSIS package.
For more information, see: Central Management Server
http://technet.microsoft.com/en-us/library/bb895144.aspx
http://technet.microsoft.com/en-us/library/bb934126.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Impact of running dcmctl resetHostInformation

Similar Messages

Maybe you are looking for