Impact of the Transport Layer changes in the package

Dear Experts,
We are in the process of the Upgrade. As a part of the upgrade from 3.1to BI7. We have two Dev systems one is with the 3.1 - BWD   and the other one is with the BI7- CBD now. We have transported all the objects with the Package : ZBWD (Where the transport Layer of this Package ZBWD).
And we have introduced the new Integration system(CBQ) in the landscape now and we have changed the Package ZBWD properties(We have changed the Transport Layer of this Package from ZBWD to ZCBD).
Can anyone please tell me the consequencies of this change in the package. We are planning to move this changed package, once the upgrade is finished.
Can any one tell me the consequencies of this change and also if we dont transport this package change in the other systems, then what wil be the consequences.?
Thanks
Raman
Edited by: Raman R on Aug 12, 2008 5:42 PM

Hi,
We have the package exists in the production which is with the earlier Transport layer called ZBWD.
As we have the new development system now, we need to change the Transport layer in that same package: to ZCBD.
Can anyone tell me will there be any impact of this change on the objects in the further landscapes? and also please explain me what are all the steps which needs to be carriedout if the transport layer got changed in the package?
Thanks
Raman.....

Similar Messages

  • Windows 8 RDP error security package error occurred in the transport layer.

    We have an issue where in windows 7 this rdp works fine but windows 8 gives this error on all machines.
    Your computer can't connect to the remote computer because a security package error occurred in the transport layer.  Retry the connection or contact your network administrator for assistance.

    Hi,
    Thanks for your post.
    Please elaborate your scenario. Which OS version you trying to access? Windows Server 2012 or earlier version? Trying to access Session Host, RemoteApp or VM?
    Please install latest Windows update on both side. Verify the port 3389 was not blocked by firewall, anti-virus or intermediate device. In addition, check the event viewer, to see if any related error was recorded.
    Best Regards,
    Aiden
    If you have any feedback on our support, please click
    here
    Aiden Cao
    TechNet Community Support

  • Text Problem - 'Editing or Rendering the text layer will cause the layout to change'

    Hello all,
    The problem I'm having is that when I try to edit a text layer, the layout of the layer changes completely - I have a grey warning triangle in the affected layer thumbnail that states the following message when I hover over it :
    'Font is present on system but requires a layout change'
    When I double click to edit the text layer, the following warning dialog pops up:
    'Editing or Rendering the text layer will cause the layout to change'
    I'm forced to click 'okay' to proceed which is when the layout of the text layer changes completely! Obviously this has massive implications for branding and page consitency!!
    Now even if I have to do this the long way round, which means rebuilding each individual text layer for every single document, there is another problem, it appears that after I click 'OK' photoshop distorts the text! This means that I can't increase or decrease the font size to match it up! Same font, Same height, same AA, same weight, different circle radius!
    Any help is massively appreciated,
    I'm using CS5 64bit Cloud edition on Windows 7, I've already tried updating and reinstalling Photoshop but it doesnt remedy the problem, I've reinstalled a sample batch of the fonts affected and deleted any plugins
    GULP!

    That warning is pretty clear - you don't appear to have the font on your system. Not sure what otehr answer you are looking for. The layout changes beyond that could be indicative of a million things like the original source layers having been heavily customized with manual kerning, used a different version of a seemingly similar font, have been created with glyph substitution on a system with a different language and whatever... Unless you mean you created the files yourself just yesterday and the warning appears despite nothing have changed, everything works as intended. If you think something is up, you need to provide more info.
    Mylenium

  • I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

    I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

    Your file is most likely toast, but still:
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Transport layer change ?

    Is there any function module or class methods to chnge the tansport layer of a package. I need to change the transport layer from a program.
    Best Regards,
    Sreeram

    >
    Sreeram Manoharan wrote:
    > Hello Florian ,
    >
    > I know to change it from SE80. I have mentioned that  i need to change from a program.Read the question properly.
    >
    > Best regards,
    > sreeram
    Yes Florian,
    read properly! You should have known he already knows how to do it through SE80. Anyone who reads this knows it, so why don't you? We all even know why he needs to do it through a program and not through SE80.
    Please hug me!

  • I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

  • My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp  to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

    My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp  to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
    The below items appeared when I opened Photoshop CS 5:
    “Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
    (I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

    For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
    If so, check Clipped and see if that makes a difference.
    (Window>Clone Source)
    As to the video card problem:
    Which version of windows are you using?
    What is the make and model of your graphics card?
    Do you know which update windows installed?

  • I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup.

    I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup. (which I now know was wrong). However, when time machine tried to restore it said there was not enough room to do a backup. It seems that it did a half backup because some essential  files such as system profiler are now missing. Can I undo this restore...? What can I do to fix this

    You need to do a full system restore, per Time Machine - Frequently Asked Question #14.
    If that sends a message, please note the exact wording.

  • How to track the transport request number for the Role/Composit Role

    Hi,
    How to track the transport request number for the Role/Composit Role.
    Thanks,
    Ravi

    Use transaction SE03 Transport Organizer Tools
    Execute "Search for Objects in Requests/Tasks" with objects of types:
    R3TR     ACGR     Role
    R3TR     ACGT     Role - User assignment
    Regards

  • I have microsoft word for for my Mac book pro. When I open saved letters /documents on word the date automactically changes to the current date. How do I stop this happening? Many Thanks

    I have microsoft word for for my Mac book pro. When I open saved letters /documents on word the date automactically changes to the current date. How do I stop this happening? Many Thanks

    I suggest you post your qeustion on the Microsoft Mac forums as it's their software you're having issues with and that's where the MS experts hang out
    http://answers.microsoft.com/en-us/mac

  • When I drag pdf files into iBooks Author, the background in the pdf file changes into the colour of my book (brown/beige)?

    Hi,
    when I drag a pdf file (when working in Preview) into iBooks Author, the background colour in the pdf file changes into the background colour of the book.
    This happens not consistently, sometimes the background of the pdf file does not change (and stays white), sometimes it's like the text in the pdf file is 'lifted' of the file, and put on the page in iBooks Author (with a brown/beige background).
    All the pdf files are scanned pdf's, nothing comes out of Pages, Word, Excel,...
    Anybody?
    Thanks a lot!
    Wouter

    I have the same question (posted here: https://discussions.apple.com/message/25644741#25644741).
    I believe this is because the PDFs have transparent backgrounds. As far as I can tell, the only way to fix it is to export the PDF as another file, such as an image file. Or perhaps convert it to Word and import it that way.

  • I am trying to set up app tabs, but when I am using one, if I go to a new site from there, the app tab changes to the new site instead of opening in a new tab, then the app tab changes to the new site. Can you help? Thanks

    I am trying to set up app tabs, but when I am using one, if I go to a new site from there, the app tab changes to the new site instead of opening in a new tab, then the app tab changes to the new site. i.e. The app tabs don't stay constant. This occurs while still in Firefox, and does not relate to when I close it. Has anyone got any ideas? Thanks

    If you backed up the iPhone to either iTunes or the iCloud, restore the backup. If not, the data is gone.
    (126342)

  • When I visit a site the color of the link seldom changes to the color I have selected. also even when it does change, it reverts to the unvisited color in a day or so.

    When I visit a site the color of the link seldom changes to the color I have selected. Also even when it does change, it reverts to the unvisited color in a day or so. The history is set to over 300 days and everything is there as far as I can tell.

    Does this problem affect all sites, or only some? Try going to a Google search results page and click a few links. Then, come back a day later and see if they are still visited.
    It may be that the links that get reset are coming from a frameset. Firefox only remembers history from framesets temporarily, which affects sites that use them. (An example would be the craigslist forums)

  • The Transport Control Buttons on the QuickTime window

    Hello every body !!!
    The Transport Control Buttons on the QuickTime window in Logic 9.1.7 disappeared…
    Some one could explain me why and how to recover them ?
    Thank you

    Re Hello
    Finally I noticed that buttons are not any more there in 64 bits mode but they appear in 32 bits...
    Thank you

  • I recently changed my wallpaper and when i was on safari the rainbow wheel popped up and i had to restart my computer, now theres no wallpaper it just a grey denim and when i try change the wallpaper only the tool bar changes not the background, help ?

    i recently changed my wallpaper and when i was on safari the rainbow wheel popped up and i had to restart my computer, now theres no wallpaper it just a grey denim and when i try change the wallpaper only the tool bar changes not the background, help ?

    Hi. When you were in the recovery drive doing permissions, did you try and run a repair of the boot drive? Did you try single user mode? Try these first and then go back and try to reinstall the operating system.When I say repair boot drive I don't mean permissions. There are both options in disk utilities.When you open disk utilities ,you will see in the left column  two drives plus possibly  a boot partition that look like an external driv. click on the second drive and in first aid use repair disk. If you still can't boot and it will not let you restore, you may have to do a clean install.   http://support.apple.com/kb/PH18869?viewlocale=en_US  

Maybe you are looking for