Impact on BI after ECC 6.0 Upgrade from Ehp 3 to Ehp 4
Hi All,
We are planning for an upgrade of our ECC 6.0 System from Ehp 3 to Ehp 4.
Could you please provide me inputs in what needs to considered in terms of BI system?
I know the following thing:
1) Delta Queues must be cleared before the upgrade starts but what needs to be considered for FI and CO Data Sources.
Any SAP Documentation available?
Thanks,
Neelesh
What version of BI is yours...3.5 or 7.0???
Unless the ehp4 is bringing some functional changes to FI or other functional datasources which needs to be replicated on to the BI side.
i think the below link might help.
Technical news brought with EHP3 and EHP4 compared to ECC6
Thanks
Deepak
Similar Messages
-
Error in WBS Element Hierarchy load after ECC 6.0 Upgrade
Hi All,
After ECC 6.0 Upgrade in R/3, we are doing test load in a Test server. While doing, we have encountered an issue with 0WBS_ELEMENT Hierarchy load. The message in the monitor is like below.
"Node ID 00014240 has not been included in the hierarchy
Message no. RH207"
When I run the same hierarchy in another system which is not upgraded , it works fine.
Anybody has faced similar kind of issues and can throw some light on this issue?
Thanks,
MohanTry activating the Heirarchy in R/3 and re-trigger the load, error is very specific to structure of the hierarchy. there is a possibility that this Hierarcy could have got inconsistent after the upgrade.
Thanks,
Amit -
Upgrade from EHP 7.01 to CE 7.1
We have portal EHP 7.01 and we are thinking of upgrading it to CE 7.1 to use Visual composer 7.1 features. We currently got ESS/MSS applications customised and running on EHP7.01 as central portal, also we got NWDI installed on our DEV system. Is upgrading to CE 7.1 is seamless or is it going to be too much hassle because we already have some ESS/MSS applications running on EHP7.01 and NWDI?
I think CE 7.1 uses J2EE server 7 version whereas EHP uses 6.4 version, is this mean there is no directly upgrade from EHP 7.01?
Please clarify from your experience is this something achievable and easy to migrate?
One important question I wanted to ask here is can we use CE 7.1 as a central portal in FPN model? or Should we stick to EHP 7.01 as central portal and use the CE 7.1 as producer portal?
Thanks
Praveen
Edited by: Praveen11 on Aug 25, 2009 1:04 PMWe found that CE 7.1 cannot be used as a central portal and should be installed seperately as lean portal for composite development.
I'm copy pasting some info from documents I gathered.
u201CUsing SAP NetWeaver CE is an application-driven decision u2013 for example because you would like to use new version of Visual Composer or Business Process Management features.
You would never really decide from a portal point of view to switch to CE 7.1, because for overall portal projects SAP NetWeaver 7.0 is the basis of choice.
This presentation aims to give you a short overview into how to integrate the applications from the CE side into your stable SAP NetWeaver 7.0 environment.
It will focus especially on the different integration technologies that are available to provide your CE applications within your central SAP NetWeaver 7.0 Portal.u201D
In short CE 7.1 has its own u201Cleanu201D portal for composite apps. CE could be installed in isolation and be a producer portal in an FPN without having any technical impact on the 7.0 Portal environment. It could be integrated with NWDI on the 7.0 Portal. There are other options also outlined in the articleu2026
Closing this thread. -
Load balancing after ECC 6.0 upgrade
Hi
I we this configuration on ECC 6.0 upgrade:
SAPGUI 7.10
SAP_BASIS 700 Patch level 15
SAPportal ESS
Webdispatcher Installed
Internal ITS
Single sign-on
Can somebody assist as with identifying the problem with load balancing (PUBLIC) E.g. When running ESS remuneration package via the Sapportal. we have configured ITS-Based GUI Services on transaction SICF for customised ZESS_PZ11PDF service.
When we have load balancing group on the load balancing does not work, because I see somebodyu2019s payslip
but when using one app server I see my own payslip. Please help.Hi PR,
Please take a look at the following link:-
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/28/75153a1a5b4c2de10000000a114084/frameset.htm
"You can only use the SAP message server for HTTP load distribution if
the browser is the direct client of the message server. If another
component lies between the client (browser) and the message server, (for
example, the portal), you cannot use the message server to distribute
the load."
When using the External ITS you could balance the load using the message server and logon groups. In 700 this functionality is not present if there is not a direct connection to the client (Firefox or IE). So you will have to install the webdispatcher to balance the load.
Hope this helps
Michael -
Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4
Dear Friends
We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
Could you please help us what needs to be done immediately after upgrade.
Regards,
BharathiDear Nils,
Thanks for the support.
Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
1. Preparation
2. Unicode Preconversion Phase in SAP Basis 4.6C
3. Upgrade Process
4. Unicode Conversion Phase
5. Unicode Conversion Completion Phase
6. SAP Notes
Regards,
Bharathi -
Hi,
I just wanted to know whether it is possible for XI 2.0 to be used with ECC 6.0 which is upgraded from SAP R/3 4.6.
If yes, could you forward some links so as to know how.
Thanks,
Farihahi,
>>>>Is that Possible..?
yes
>>>Wont there be any additional configuration needed ?
if you use IDOCs then you don't need anything special
Regards,
michal -
Hardware requariment for ECC 6.0 upgrade from ECC 5.0
Hello
I am on ECC 5.0 with oracle 9.2.0.7.I need to upgrade this to ECC 6.0.
I have already implemented MM,PP,FICO,QM and HCM.My current data base size is 900GB.This has 30GB monthly growth.
With this ECC 6.0 upgrade i am planing to implement PM,EP.
I know converting none Unicode system to unicode system is required some more hardware resources than the none Unicode.
Some document says 40-60% more disk space and 35% more processing speed from current system.
Can any one give me the correct information about the hardware requirement for ECC 5.0 to ECC 6.0 upgrade.
Thanks
RoshanthaCheck with the Links
https://websmp102.sap-ag.de/sizing
https://websmp208.sap-ag.de/quicksizer
http://www.4soi.de/
http://www.easymarketplace.de/
Kanagaraja L -
ECC 6.0 Upgrade from 4.7 - EDI Interfaces
Hi Gurus,
Need your inputs on what are the precautions to be taken during ECC 6.0 Upgrade related to EDI Interfaces. with SAP upgrading from 4.7 to ECC 6.0, do you see any precautions need to be taken considering the middle ware involvement. Also, is there any changes in IDOC Structures in ECC 6.0 which my cause issues related mapping with middleware.
Please suggest.
Thanks & Regards,
C.L. Narasimhan "CLN"Hi,
generally, a release upgrade, delivers new idoc/message types or new releases of existing idoc/message types.
So, taking this in mind, you shouldn't have problems for the mapping of the messages, because the versions of the basic idoc, once released, cannot be changed.
You might have some application problems related to the inbound interfaces, but this is part of the game...the testing phase will highlight whether the problem exists.
A known problem is that the upgrade removes all the customer specific entries in the system table EDIFCT.
Further details are provided in the OSS note [https://service.sap.com/sap/support/notes/865142]
Regards,
Andrea -
No sound after Windows 10 free upgrade from WIN7 on G71-340US laptop with IDT CODEC.
After free upgrade from WIN7 to WIN10 my laptop no longer has any sound (with internal or external speakers). I have tried uninstalling IDT driver and allowing Windows 10 to reinstall the driver through scan for HW changes - still no sound. I would appreciate any guidance or fixes for this problem. Thank you.
I am happy to report I now have sound on my G71-340US laptop. After further trial and error troubleshooting I found that there is an app called IDT PC Audio (aka IDT HD Sound) installed on my laptop by HP (OEM) I think. While I'm not exactly sure what this app's function is it appears it is related to activating IDT HD Codec drivers functionality. Somehow I decided to look in Task Manager - Startup and saw this IDT PC Audio listed. I clicked on disable and then a minute later clicked on enable. After I did that, as simple as it appears, I now was able to hear sound both on internal and external speakers. This is the first time I heard any sound since upgrading to WIN10. I have checked it several times by re-booting my laptop and each and every time I now have sound. I'll continue to test this through the week and see if it continues to be OK. Meanwhile, I thought I would share this potential fix (or workaround) with all concerned. Perhaps others will find this useful and provide me your feedback. Keeping my fingers crossed! PS. BTW, if anyone out there knows what IDT PC Audio is by all means share your knowledge. I am curious why this app doesn't appear more often in the forum posts and how it may relate to the WIN10 upgrade. Sorry, but I don't recall what prompted me to look at Task Manager - Startup but I'm glad I did. It's great to hear sound again!
-
I executed a "check for updates" upgrade from 150 to 151 and all my connections are not displaying in the connection pane. I had nearly 100 connections defined - how do I get these back? There seems to be several issues related to this but nothing is clearly described as to exactly how to get these back.
I take you didn't migrate your settings on first start after the upgrade; so logically you get a clean environment.
Now I guess the easiest fix would be to copy the [user profile]\sqldeveloper\system1.5.0.53.38\o.jdeveloper.db.connection.11.1.1.0.22.49.35\connections.xml to [user profile]\sqldeveloper\system1.5.1.54.40\o.jdeveloper.db.connection.11.1.1.0.22.49.42.
Have fun,
K. -
BSP iview not working after ECC 6.0 upgrade
Hi,
We are using MSS application in our portal.When we click the Employee list under manager profile it redirects us to a new page aontaining 3 to 4 iviews like general data,Personal data(Par file based iview) etc
After selecting the employee all data pertaining to the employee appear in these iviews(data comes from SAP HR system).There is one more iview that represents the emergency information of the employee that is a BSP iview.Few days before we have upgraded ECC 4.6 to ECC 6.0 after this upgrade we are getting values in all par file based iview but the data is missing in the BSP iview.
Can anyone help?
Regards
ImranHi,
Are you getting any error? After upgrade do you activated the bsp service through
T Code: sicf
then Service Execute, then
defalut_host --> sap -->bc --> bsp --> sap -->your BSP Application Name, then right click and Activate.
Regards,
SrinivaS -
Open Dataset for input in BINARY MODE not working after ECC 6.0 upgrade
Hi All,
Our requirement is to download an XML file from the application server and there is a customized program to download these files.
This program uses the statement, Open dataset ...for input in BINARY MODE
and it works perfect for 4.7. There were no issues. But, after the upgrade to ECC 6.0 this does not work.
When the data is read in ECC 6.0 , it is shown in some special characters and it could not be opened with XML editor and the file is not completely downloaded. I read through the forum and tried the following statement as well,
Open dataset....for input in LEGACY BINARY MODE.
After this statement, there were no special characters, but there is a blank space introduced before every character.
Example : TEST(actual)
T E S T (After the legacy binary mode)
Could you please let me know if there is any solution to rectify this problem. Appreciate your help.
Thanks a million.
Edited by: Manikd on May 12, 2011 3:52 PMBut this program was already using BINARY MODE and after upgrade this is not working. I know, it may work in TEXT MODE. However, I cannot change the whole program to TEXT mode now.
-
No blank first column in Excel after ECC 6.0 upgrade
Hi,
I am facing a weird issue. There was a recent upgrade to ECC 6.0, after the upgrade the excel sheets that are downloaded from SAP transaction COOIS do NOT have a blank first column.
Is there a way to fix this issue, some external applications use this excel report to read the data and it is really difficult to fix all those applications. Please do let me know if you have any clue.Try activating the Heirarchy in R/3 and re-trigger the load, error is very specific to structure of the hierarchy. there is a possibility that this Hierarcy could have got inconsistent after the upgrade.
Thanks,
Amit -
Problem with ITS after ECC 6.0 upgrade
Hi All,
I am facing problems with customized ITS application created based on CATW. It does not work properly after an upgrade to ECC 6.0 from 4.7. Some of the screens user interface is different when i compared that of with 4.7. I came to know that ECC 6.0 uses the Integrated ITS where as 4.7 uses the Stand-alone ITS. What is the difference between them? Is there any way to deactivate the Integrated ITS and run the application on ECC 6.0 as it was before on 4.7?
Any help much appreciated.
Thanks,
Naga BokkisamHello Naga,
can you be more specific about the differences between 4.7 and ECC 6.0? Are you using the SAP GUI for HTML (~webgui 1)?
With best regards,
T. J. Domsalla -
Final Issue Indicator not set in maitnenance order after ECC 6.0 upgrade
Hi,
We encounter this problem after upgrading to ECC6.0 from SAP R/3 4.6C
Final issue indicator (RESBD-KZEAR) is not being set in maintenance order (IW33) for sub-component non-stock items in General Data page
Would be great if anyone could guide in this regard
Detailed Scenario:
1) Maintenance Order is created (IW31) is created in plant A
2) For non-stock items, reservation created by maintenance order creates a purchase requisition
3) Account Assigned STO (against maintenance order) is created from purchase requisition
4) Transfer Posting done from Plant B (351 movement) for complete qty
5) GR at Plant A done (101 movement) for complete qty.
6) Final Issue Indicator is not set in General Data page eventhough the complete quantity is delivered.
Thanks
Edited by: muthukumarv on Apr 2, 2010 8:59 PM
Edited by: muthukumarv on Apr 2, 2010 9:00 PM
Edited by: muthukumarv on Apr 2, 2010 9:03 PMHi,
Please check in the STO if the "Delivery completed" indicator is checked or not?
If Yes, then search some correction notes of SAP and get it implemented or raise OSS message with SAP to get the Final Issue indicator to be set in maintenance order.
If No, then ask your MM consultants to investigate that. They can check the config of "Goods Receipt" Or check if the total quantity GR has been done Or some Under delivery/ Over delivery tolerance has been maintained.
Thanx.
Nilmoni.
Maybe you are looking for
-
https://bugzilla.mozilla.org/show_bug.cgi?id=581240 I use Firefox to work online with a wiki called Confluence. When previewing a page in any version after 3.66, you cannot scroll properly to see the whole page. I would have provided this as feedback
-
Having problems with family sharing invites
Hi, I send the invite to my son, which appears in his email, but when he views the invite it does not come up with the option to accept or decline and is therefore unable to join?
-
Installing adobe flash on my Xperia z tablet
I have been trying to install Adobe flash because I need to run pebblepad + or any other videos requiring Adobe flash player. Any suggestions please? Thanks! From moolife
-
Snapshot has disappeared , how can it be restored ...
where do I find snapshot on the screen, it has gone missing , how & where do I find it
-
Can't scan after moving ImportModules to Plug-Ins folder.
I purchased Photoshop Elements 12 a couple of months ago. At that time, I was able to scan images after moving the the ImportModules folder to the Plug-Ins folder. However, I had to reinstall Mac OS 10.3 after repairs were made. Elements would not sc