Impact on changing ECC client on the working of ESS business package in EP

Dear Experts,
We had ESS business package working fine in our EP 7.0 which connected to client 100 of ECC 6.0.
Now we changed to client 700 in ECC 6.0.
Now all is working OK except for the Personal Data piece (address,bank etc).
The first screen shows up OK but when we review it we get the error :
Access via NULL object reference not possible.,error Key:RFC_ERROR_SYSTEM_FAILURE
The user is setup the same way as that in ECC 100.
The JCO is working correctly.Get successful message when we click "TEST".
I have used USER/PWD in both meta data and application data (though it is said to use Ticket and User/Pwd.  It worked with ECC Client 100.)
Appreciate any inputs
Thanks.
Ashish

hi ashish,
try to use only application data

Similar Messages

  • How to customize iViews in the ESS business package?

    How to edit the iViews  in the business packages already provided by SAP.
    I downloaded and installed the Employee Self Service business package.
    I am able to see the iViews under Portal Content->Content Provided by SAP->End User Content->Employee Self Service->iViews->
    Now I want to include some entities , say a text box to  a particular iView, how can I do this.?
    Could some one help me in this?
    Help would be higly rewarded.

    Hi,
    This <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3467">blog</a> might help u in Configuring The Business Package For Employee Self Service.
    Here are a few more weblogs:
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5978
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2101
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6015
    Hope this helps.
    Regards,
    Sujana

  • Is recruitment part of the  ess business package?

    Hi all,
    Is recruitment part of the  ess business package (BP_ESS_mySAPERP2005_P1)  ?
    or we need different business package to access recruitment from back end ?
    Regards
    Rajendra

    Thanks  Sudheer and Aneez.
      Do the external applicant can apply for these positions or  upload their resumes using this application ? ( from internet can candidates apply  or upload there resumes?)
    Regards
    Rajendra

  • Undeploy the ESS Business Package

    Hi,
    Accedentally i had deployed the ESS Business Package for SAP ERP 2004.
    Now i want to deploy ESS Business Package for SAP ERP.
    How can i undeploy the existing one???
    Can i imort tthe new one ? will there be any conflicts?
    How to do this?
    Thanks in advance,
    Mr.Chowdary

    HI,
    using the SDM GUI tool, u can undeploy the SCAs
    Regards,
    Satya.

  • ESS Business Packages Migration from Ehp3 to Ehp4 with Custom Changes

    Hello All,
    We are using ECC 6.0 With Ehp3 and We have the following versions of ESS and MSS Business Packages Installed.
    SAP_ESS 603 SP4
    SAP_MSS 600 SP15
    We have NWDI server also installed in this and made some Customizations in ESS Webdynpro Java based applications.
    We have freshly installed  a new portal development server with Netweaver 7.0 Ehp1 to cleanup unneccessary stuffs in our existing development portal server and pointed to the upgraded backend ECC 6.0 Ehp4.
    The NWDI also installed freshly in the new server.
    While upgrading,  following Business Packages versions are recommended by SAP.
    SAP_ESS 603 SP6
    MSS 600 SP17
    PCUI_GP 603 Sp 06
    Now in the New portal server every applications works fine as delivered Out of the box and we are missing all the Webdynpro Java customizations which we have made as part of the Ehp3 based ESS Implementation.   
    We are in the process of Creating the New track in the New NW 7.0 Ehp1 server and import the .SCA files.
    My Question is how can we get the automatic migration process, so that the Webdynpro Java Customizations which we have done in the Previous track in Ehp3 with different ESS SP level can be carry forwarded to our New NWDI Server.
    How can we go ahead?. We are thinking of the following options and your suggestions are highly appreciated.
    1. Import the .SCA files related to Ehp4 and do the Webdynpro Java changes manually again in the DCs of Newly created  track    in the New NWDI server.
    2. Is there a way to migrate a Track from One Server to another NWDI server with the Custom changes carry forwarded.
    What are all the possible ways to achieve track migration to the new server with custom changes carry forwarded.   
    Appreciate your valuable inputs in this.
    Thanks and Regards,
    Sekar

    Hi Sekar,
    There is a cook book provided by SAP as attachment of note 872892. you can follow the process to have your custom DC's migrated to new Support pack of ESS/MSS.

  • Error in the BSP service of business package SAP Learning Solution

    Hi all,
    I'm implementing the business package for Learning.
    I've activated a BSP service in Backend system (ECC 5.0) with BP LSOFE300 (Sap E-Learning Solution).
    On testing the BSP service,I've a "Raise Exceptions" on link "Training Activity" and in others link "Error: RC 2".
    This is the exception:
    Exception condition "INITIAL_LEARNER" raised.
    Tipe of interruption: RABAX_STATE
    ABAP Hierarchy:
    Function: LSOF_LEARNER_GET_ACTIVITIES of program SAPLLSO_FRONTEND
    Kindly provide inputs to solve the problem.
    Thanks,
    Lisha

    This worked for me too. Thank you very much.
    However, I am missing the point
    "You must also make sure that all users that use the connection have authorization to Trusted RFC"
    could you be more clear on this.
    I have a problem described below. I am not sure where it is coming from.
    I installed bp for Learning Solution 300 on EP6.0 SP16. It has one BSP iView. The iview is assgined to a page and page to workset and worset to a role. Couple of Portal User ID was assgined this role. SAPR/3 user ids same as portal user ids were assigned to IT105 of PERNR in t-code 'pa30'.
    We are using SAP logon ticket method for SSO with ECC5.0.
    I logged into portal with one user id and tested the application. The corresponding PERNR was assigned some qualifications, profile match up etc. in the backend. The values are getting updated in the portal.
    But when I logged into portal with another user id, I am seeing the same qualifcations of the last 'PERNR' instead of the qualificaitons of 'PERNR' assgined to this User ID.

  • Change ESS Business Package

    Hi
    I want to change the ESS 6.0 business package in NWDS. We do not hve the NWDI. We have portal 7.0. How can I modify the SCA file in NWDS, if it is possible.
    Regards

    Prince,
    Without NWDI you cannot modify the Webdynpro Java code for ESS.....you can rather go for some Personalization changes....on portal.....or do some config. in R/3 ....depends on your requirements....
    Regards,
    Shikhil

  • ESS Business Package - How to change error message

    Hi,
    In ESSBusiness Package Leave Application screen, if we enter some character XXX for From and To date field and try to proceed further (preview button) It is showing a error message 'Enter the value in format 11/25/1987" that we want to change to 'Enter the value in format MM/DD/YYYY".
    Please let us know from where this standard message is coming whenever we put some character values for any date control and how to change the same to customer specific message.
    Regards
    Sudhir

    Thank you Poojith,
    This is a standard message not only coming for Calender control in ESS application but also behaviour is same for custom webdynpro applications. So this message is not part of Leave Component message pool
    Regards
    Sudhir

  • Change iviews installed from a business package

    Hi experts,
    I'm working on EP 2004s and I would like to know if there is a way to change iviews installed in the portal from a business package using Visual Composer. Can I copy them into my own created package in VC?
    Thanks
    Panos

    Hi,
    Usually Business Package iviews - especially the older ones - aren't based on Visual composer models but rather older IView technology. Therefore, it should be impossible to change them in VC.
    I've heard that SAP may be considering releasing business packages (XSS?) as VC models but never heard any confirmation regrading this. Probbaly based on the support-related questions. I once blogged on this <a href="/people/community.user/blog/2007/01/30/enterprise-soa-explorations-fragments.
    Dick

  • How to find the leave request layout in standard Webdynpro ESS business pac

    Hi Gurus,
    How to find the Intial leave request layout from the standard webdynpro ESS business package.
    Can you tell me the exact component that i need to look for this particular layout.
    Its a urgent requirement can you guys send me the answers ASAP
    Higher points will be rewarded for the useful inputs.
    Thanks in Advance,
    Dharani

    look for ess~lea dc
    reward points if helpful

  • Connecting multiple ECC Clients on same ECC system to BW system(s)

    Hello.
    We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time.  We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
    Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system.  The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about? Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'? Any and all comments are welcome as we have not yet acted on our ideas yet.
    Thanks very much for whatever comments you might provide,
    Geoff.

    We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
    No impact on the BW system. The only thing that you will have to take care of is that any process chains which fetch data from this DEV ECC system should not be put on periodic cycle because after disconnecting the ECC system, these would start failing.
    Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about?
    Again no impact on ECC system. As for the client connected earlier to sandbox system, just clear all the queues in RSA7, LBWQ
    Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'?
    No its not at all a bad practice

  • How to find the source code in the par files for B Package  Projects 50.3

    Hi,
    I want to modify the par files (related to Business Package Projects 50.3) which i imported into Netweavier Developer Studio. I didn’t find any jsp files or any java files in it.
    If any one worked in this Business Package for Projects 50.3, please give the solution.
    Thanks
    Ravi

    Ravi,
       The recommended appraoch for modifying Business Packages is by using NWDI - Netweaver Development Infrastructure.( new name for JDI)
        You should be able to make modification, package/build a new version and deploy. The pre-requisite is you need to set up NWDI on the server, create a Track in CMS(Change Management SErvice) and configure your DTR. Once done you can import the configuration file into your NW Developer Studio and make modifications.
      hope this helps.
    *points will be appreciated

  • Business packages on 1 J2EE and connecting to multiple R/3 clients?

    Hi,
    We have an installation with on R/3 side one client on 1 SAP system; this system is ERP2004. On this environment we have the ESS business packages installed (on J2EE).
    At this moment we are splitting up our environment and we are considering either completely separeted system per company or just one system with a separate client per company.
    If we do a complete split of the system, I don't see any major issues as everything will be split.
    Gor the 2nd option: If we want to install the business package on 1 system but for multple clients, I don't find any documenation on tyhe possibilities of this option.
    Any idea if this is possible and if so what are the limitations, pitfalls etc?
    Best Regards,
    Michel

    Hi Rune,
    For the new R/3 Client that you want to add...create an SLD entry for the Technical System(if the Tech system is already there, add the new client to the Tech System)...
    Create a new bussiness sytem for this new client that we added, make sure that the Logical system name is updated correctly as maintained in the R/3 Client.
    Import the new business sytem to the Integration Directory, Create RFC/IDOC comm. channels for this bussiness systems.
    Now if you want to add this as a recipient to an existing scenario...Open the receiver Determination for that scenario and add this bussiness system as a receiver.. maintain the interface determination and receiver agreement for this addition and that should be it...
    Thanks,
    Renjith

  • Which are the latest business packages for ESS and Mss?

    Hi all,
    Which are the latest business packages for ESS and Mss?
    Regards
    Rajendra

    Hi rajendra
    It's all about R3 version, which R3 version u used?
    the following BP are available for ESS/MSS on service.sap.com u need sid-password to download it.
    <b>R3 4.6C/4.7 Enterprise</b>
    ESS: - Business Package for Employee Self-Service 4.6C - 4.7 50.4
    https://websmp102.sap-ag.de/~swdc/011000358700005104712004D/BPESS46C504_0-20000613.ZIP?_ACTION=DL_DIRECT
    MSS: - Business Package for MSS 60.1
    https://smpdl.sap-ag.de/~swdc/012002523100003529452006D/BPMSS601_19-20001489.zip?_ACTION=DL_DIRECT
    <b>ERP2004: - (R3 ECC 5.0)</b>
    ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
    https://smpdl.sap-ag.de/~swdc/002007974700000167412004D/BPERP4ESS0_0-10003146.zip?_ACTION=DL_DIRECT
    MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
    https://smpdl.sap-ag.de/~swdc/002007974700000246072005D/BP_ERP4MSS0_2-10002991.zip?_ACTION=DL_DIRECT
    <b>ERP2005 : - (R3 ECC 6.0)</b>
    ESS: - BP ERP05 ESS 1.0 Support Package 03 ( Up to SP5 available)
    https://smpdl.sap-ag.de/~swdc/012002523100000076042006D/BPERP5ESS03_0-10003288.sca?_ACTION=DL_DIRECT
    MSS: - BP ERP05 MSS 1.0 Support Package 03 ( Up to SP5 available)
    https://smpdl.sap-ag.de/~swdc/012002523100000076062006D/BPERP5MSS03_0-10003289.sca?_ACTION=DL_DIRECT

  • Need to know the Business Package for CRM4.0 Sales in EP6.0

    Hi experts,
      We are trying to implement the CRM4.0 Sales business package in our EP6.0 environment( Our Backend R/3 is in 4.6B) . We would like to install complete package for the Sales module (The main (Top level) menus in the portal look like the following ==>
    Activities..  Account Management  ... Acquisition.. Sales .. Products..  Analysis..   Home..  R/3 Integration .. CRM integration .. APO integration..
    Below every top level menus there are sub menus.. For example under Sales we would have the folliwng ( Overview.. Quotation.. Orders .. Contracts.. Billing Documents )
    In the list of package from CRM (available in the SDN) the following looks like the currect one, can anybody advice please.
      Business Package for SAP CRM 4.0     60.2.3   SAP AG   Unrestricted Shipment.
    However, since we are only interested about the Sales Portion only can we choose to import content that is relevant only to the CRM SALES as well as CRM SALES analytics and not anything else? If it's possible the what is the procedure? If not then I assume that we will have to import the entire content and activate only the portion that we need. Please advice.
      Appreciate a detail reply.
       Thanks
    Arun

    Hi Arun,
    When u download and apply a busiiness pacakge u will get the complete package.
    After appling the bussiness package u will get a report showing whcih all roles worksets etc are added to the portal. And also In portal contants there will be a folder created. There u can see the roles , worksets pages iviews etc.
    You can edit the role and put the desired iviews or pages according to u r demand.
    Hope this Helps
    gEorgE
    Read the log file(generated after importing the BP) it will give u all the information abt the contents that are uploaded to the portal server.

Maybe you are looking for

  • How can i delete an icloud account from my iphone

    How can I delete my icloud account from my iphone. I have two icloud accounts the old one just can not retrieve the pwd to access it

  • Can we restrict a Procedure to be called only once in a session or package?

    Hi, I am having a procedure which is called for each insert statement. The code is non-Editable. So, I want to restrict the procedure to be called only once for the entire session or package. Could any one please suggest me, can we do this? Thak you,

  • Legend in manual mode - Background color

    Hi all, To create legend in manual mode I am using following request URL for a style image. http://127.0.0.1:8988/mapviewer/omserver?sty=L.ROAD&w=20&h=20&ds=cescdatasource Here if the color of style is white (For example white color line style) then

  • MIGO Item Text  field

    Dear Experts, Want to check with you all, how to made MIGO "Item Text" (SGTXT) field a mandatory field? And is there any way to insert the item text back to posted material document. Because user claimed that in GL line item they want to see all the

  • Need to add contact with 2 email addresses

    I have a contact in my address book for whom I need to add 2 email addresses in the same field. I know I can add multiple addresses, but that gets confusing for this contact, because I need to send every email to him at both addresses. I tried adding