Impact on the creation new UD code

Dear sap gurus,
   There is a requirement to create to new UD code for partial acceptance of material with material type (ROH & VERP). I had created new ud code 'P' (partial acceptance) which will have same characteristics of ud code  'A' ie accepted. This will function will be activated when a batch of material is partial approved and partial rejected.  I would like to know what are changes i  would require to do inorder to achieve this functionality. The reason behind the creation of new ud code is we are not able to bifurcate when we are doing MIRO when the material is partially approved and rejected.
with regards
Harish Ramachandran

Not one of my better areas but I'm pretty sure when you make a UD you can update the quantity so you will need to make two UDs for the given Insp. Lot i.e. do not use 'partial acceptance' but one UD of acceptance for quantity 1 and rejection of quantity 2.
Regards,
Nick

Similar Messages

  • SPRO settings for the Creation of treatment codes.

    Hi Experts,
    Let us know SPRO settings for the creation of the new treatment codes and suggest us where it can be checked once created eg. Sales order,Delivery,Invoice.
    Regards,
    harmesh

    Hi
    What is Treatment Code??
    If you mean Sales Order / Delivery / Billing Document Type then you may follow the below path in SPRO :-
    Order :- IMG> Sales and Distribution>Sales > sales Document>Sales Document header(VOV8)
    Delivery :- IMG--> Logistics Execution > Shipping>Deliveries --> Define delivery Type (0VLK)
    Billing :- IMG --> Sales & Dist. > Billing> Billing Document--> Define Billing type (VOFA)
    Regards
    Amitesh Anand

  • Cross Plant Planning- MRP activation indicator turned after the creation of Material code

    Dear Experts,
    Working on Cross plant planning, where 1001 Production plant will stock transfer material to 8 different plants.
    Right now, only 10001 plant had MRP and planning file entry ticked in customizing OMDU.
    The other 8 plants have Materials codes created and MRP views extended but no MRP activation is ticked.
    Now, to have Cross plant planning MRP set, I have done necessary configurations, Scope of Planning, Special Procurement 40, and parallel processing is configured. All master datas are set properly. Tested few scenarios in IDES, working fine.
    If my understanding is clear, than I thin I need to run MDAB, activation of planning file and MDRE, Planning file Consistency Check,  because MRP will run in background?
    Is this correct or something more needs to be done ?? Please suggest
    Please also tell what is the use of MDRE t code.
    Best regards
    Shailesh

    Hello Shailesh
    MDAB (RMMDVM20) is at plant level, you need to create different variants as per your plants
    Create a variant for the new plants and then schedule a job for these variants.
    Check customizing transaction OMDU -> set up planning file
    entry and consistency check of planning file entries.
    Best Regards,
    R.Brahmankar

  • Impact of Addition of New Value Fields in the existing Op. Concern-COPA

    Hi All,
    Want to know the steps of adding new value fields in the existing operating concern in COPA?
    What is the overall impact of addition of New Value fields in the running Operating Concern?
    How do we test the addition of new value fields?
    Is the addition of New Value fields to the running Operating Concern advisable?
    Your support and advice is highly anticipated and appreciated.
    Thanks & Regards
    9819528669
    Ohter details are as follows...
    VALUE FIELDS : Defines the Structure of your Costs & Revenues. (Op. Concern 120 Value Fields) 
    1)     The client requires three new value fields to be created. Value fields for :
    -     Other Airport Charges - International
    -     Cargo Commission Cost
    -     Personal Cost (Direct)
    2)     What are the Steps involved in creation of new value fields? The steps are :
    1)     Before creating new value field we need to check whether we can use already existing UNUSED value fields (There are 62 value fields created for the op concern 1000, in production the value fields TBUL1-L7 i.e. to be used (I assume) screen shot1 provided. My predecessor has used value field VV291, VV292, VV380 original description being TBUL3, TBUL4, and TBUL1. I believe he has changed the description in development client and created a transport request ref screen shot 2)
    2)     You can create new value field thru T-Code KEA6 (4-5 characters beginning with VV) u2013 My predecessor has reused the value fields originally created he has not created new one I believe. please provide give your comments)
    3)     Specify whether this field is for Currency or Quantity (currency defined in attribute of op concern and quantity defined by its own field u2013 unit of measure) u2013 My predecessor has configured the three value fields as Currency.
    4)     Describe how the values in this field are aggregated over characteristics. (SUM, LAS, AVG) u2013 My predecessor has aggregated all the three value fields as SUM and they are in Active status.
    5)     After the value field is created you have to add the value field (active status only) to the operating concern by Editing the Data Structure. (I guess this is done in the next step)
    6)     Assign newly created Value fields to the Operating Concern u2013 T-Code KEA0 (In development client the value fields are assigned to the op concern 1000 refer screen shot 3. In the production client also those three value fields exist (does it mean they are assigned? your comments please.) As they have the original description TBUL3, TBUL4, and TBUL1 refer screen shot 4.
    7)     After the Data Structure is defined you need to activate them. (creates plan vs actual database) u2013 Go to the data structure tab and Choose Activate. The status in dev client is Active with correct description but in the production client it is Active with the OLD description. After addition of the value field you need to regenerate the operating concern. T-Code KEA0 u2013 right?
    8)     Condition Types are assigned to Value Fields? Donu2019t know u2013 T-Code KE45 (I think this is NOT required in our case u2013 Please give your comments)
    9)     Define and Assign Valuation Strategy u2013 Cost assigned to Value fields u2013 T-Code KE4U (I think this is also NOT required in our case)
    10)     Define PA Transfer Structure for Settlement u2013 T-Code KEI1 (This step is crucial u2013 I think I have to to include newly created value fields, but am not aware how to do it and what is the connectivity or what happens after this is done)
    Note: My predecessor has created a Transport Request No# KEDK902167 for the value fields created by him.
    3)     Whether my predecessor has performed all the steps for value field creation? How to test it and check that?
    4)     If yes then,  Do I need to perform additional configuration or can I proceed to transport it to Production?
    5)     What is COPA Allocation Structure & PA Transfer Structure? Where and Why It is used?
    6)     What are the different methods of cost and revenue allocations in SAP?
    7)     I have checked the status of the value fields across clients, It is as followsu2026
         Value Field     Value Field For     Description     Development      Quality     Production
    1     VV291     Other Airport Charges International     TBUL3     Exists      DNE     DNE
    2     VV292     Cargo Commission Cost     TBUL4     Exists      DNE     DNE
    3     VV380     Personal Cost u2013 Direct     TBUL1     Exists      DNE     DNE
    #DNE : Does Not Exist (assumed since the description given to value field is not the same as in development client.)

    HI sree,
    ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
    Thank You!
    Best Regards,
    pradheep.

  • Request for the creation of a new Unemployment account for tax

    Hi Guys,
    This is a question with regard to US tax. We have received a request for the creation of a new Unemployment account for the payment of taxes. This is because the account assignment number has changed for a particular company code in Tennassee state. Please let me know where this change could be made in SAP.
    Thanks,
    Subbaiah

    Subbaiah,
    Table T5UTL is used for New Tax Company Codes. If this is a new legal entity, youu2019ll need to set up the Tax Company here. Youu2019ll also need to assign at least one Personnel Area to this new Tax Company. This must be established in order to update the next table shown below, but only if itu2019s a new legal entity. The user will know.
    Table T5UTH is for establishing the account number to be used in BSI. It must be established in order to update the next table shown below.
    Table T5UTI is for assigning account numbers by Tax Company Code. Youu2019ll need one for Tax Authority TN, Tax Type 10. The user will need to supply this information to you.
    Table BTXRATE will need to be updated with the Tax Company Code, year, and the State Unemployment Insurance rate & taxable wage amount.
    Once this is done, youu2019ll need to update BSI.
    If Tennessee is a new state, youu2019ll have work to do with the tax models.
    Regards,
    Howard

  • Creation of new country codes - Serbia.

    The business user is not able to find country code for Serbia in production system.
    We are currently using SAP ECC 6.0.
    I have refered the SAP note no 603152 for creating country code .
    Their are two alternatives available to fix it:
    1. Manual creation of country code in the system. We need to maintain additionally the currency also in the system.    Note: I do not know the implication of manual creation of country code in SAP sytem. As Country codes are used by many tables.
    2. If we need new country codes for country settings of Serbia.
       Then it can be done by using new SAP Basis (Netweaver) releases from release SAP_BASIS 710 or  appropriate support pack. Then country precustomised setting of serbia can be done by upgrading support pack of basis.
    The above alternatives are available. As country code is an important aspect & maintained at client level.
    Please let us know which alternative would be suitable, Why.

    I would recommend the basis way.
    If you go the manual way - Go to T Code OY01.
    Thanks,
    Nandita

  • Creation of 2 new company codes in continuation with existing compny code.

    Hi
    Our company has got 2 locations but we are using only one company code for both the locations from the last 4 years.
    Now due to expansion of business we have extended our business to one more location. So.now are planning to use 3 company codes.
    Now I want to know the following things:-
    1. What are the things that are to be done before creating these two additional company codes?
    2. What will be the impact of  these new company codes on the existing company codes?
    3. How the present reports can be used for the new company codes?
    4. How the GL balances will be uploaded for the new compny codes?
    5. How the master data will be created for the new company codes?
    6. What will be the impact of the new company codes on other modules like MM, SD and HR which are already in use?
    Please guide me on the above issue co months of experience.
    considering the fact that I am a fresher in SAP FI and I have
    only 8 months of experience.
    Regards
    Vikram sairam

    Hi Vikcy,
    Company Code is legal Entity and core component in FI.
    Now u r planning create new company codes, just check below:
    01. Chart of Accounts:
         - You may use existing chart of account for new com. code
    02. Controlling Area:
          -  Check the feasibility of cross company code controlling or not. If you maintain one:one relation in existing controlling area, u need to create new one.
    03. SD:  Core component is Sale Organization.  U need to assign them to ur Company Codes. So check accordingly.
    03. MM/ PP:  Plants and Purchasing Organization need to assign to Company Codes.
    Hope it will give you idea on a whole to plan, how u need plan to go ahead.
    Regards,
    Venkat

  • Troubles with the creation of New Custom Adapter for NW 7.1

    Hi guys !!!
    I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
    [Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
    note : 1004000
    I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
    S U M M A R Y
    ~~~~~~~~~~~~~~~~~~~
    Successfully deployed:           0
    Deployed with warnings:           1
    Failed deployments:                0
    ~~~~~~~~~~~~~~~~~~~
    1. File:C:Users
    maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
         Name:PI71_AF_myFirstCustomAdapter_ver_2.0
         Vendor:sap.com
         Location:SAP AG
         Version:7.1007.20090310105326.0000
         Deploy status:Warning
         Version:NEW
         Description:
              1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
         at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Result
    Status:Warning
    I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
    Antonello

    Hi,
    the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)

  • Creation of new tax codes

    Hi,
    I  have a requirement for creation of new tax codes. I have created new tax codes in FTXP and assigned G/L accounts in OB40. This part is clear for me.
    Now my questions are as under.
    1.     Where do i restrict the validity date for old tax codes and validity date for new tax codes.
    2     What needs to be updated in terms of condition records
    3     Is there anything needs tobe  update in info records for MM.
    Regards
    Krishna

    Unless you use jurisdiction codes, and no external tax system, for
    example with tax procedure TAXUSJ, there is no validity dates for the
    condition records.  You can see this differnce by comparing the tables
    A003 without jurisdiction codes and A053 with jurisdiction codes.  A053
    contains the extra fields DATBI (key field) and DATAB.  This is the
    standard functionality.
    Please have a look at the following part of note 418582:
    " Changing past percentage rates has to be inhibited in order to avoid
    database inconsistencies. For this reason, the functions which allow you
    to transport time-dependent tax codes with percentage rates from the
    past are not supported."

  • New Tax code Creation for CST(Condition type

    Hi Friends,
    I am facing an issue during creation of new Tax-code for CST; condition type JIN1. After defining the tax percentage; system is picking an automatic G/L account, which is a grey field and can't be editable. We need to change G/L account and need to assign a new one.
    Can you please tell us how can we remove the default assigned and non-editable G/L account.
    Your support is appreciable.
    Rgds, Krishan Raheja.

    Hi Krishnan,
    Use transaction OB40, here double click on the Account Key (you can check this account key assigned to condition type in OBQ3 and also in FTXP screen) that is mapped to condition type JIN1 and enter your chart of accounts. Now change the G/L account you want.
    Regards,
    Chintan Joshi.

  • New company code configuaration is added for the existing company

    Hi Guru's
    New Company Code is to configure for the existing company. Already we 20 company codes.
    Now Business users want new code for the country australia.
    Please let me know what are the steps to configure the new company code.
    I appreciate your help and coperation.
    Regards
    Jenny

    Hi jenneyc,
    1.1 Define and Assign Company Code     
    1.1.3 Assign Company Code to Controlling Area
    1.1.4 Create new plant     
    1.1.5 Define and Assign Sales Organization     
    1.1.5.1 Copy Sales Organization     
    1.1.5.2 Change name and address of Sales Organization
    1.1.5.3 Assign Sales Organization to Company Code
    1.1.5.4 Assign Sales Organization ‑ Distribution Channel ‑ to Plant
    1.1.6 Delete Purchasing Organization assignment to Company Code
    1.1.7 Define Variants for Open Posting Periods
    1.1.8 Open and Close Posting Periods
    1.1.9 Assign Posting Period Variants to Company Code
    1.1.10 Create Number Ranges for document posting for company code
    1.1.11 Asset Accounting - Specify Number Assignment Across Company Codes      
    1.1.12 Creation of House Bank and Bank accounts
    1.1.12.1 Define House Banks
    1.1.12.2 Define Lockboxes for House Banks     
    1.1.12.3 Define Posting Data
    1.1.12.4 Set Up Payment Methods per Company Code for Payment Transactions
    1.1.12.5 Set Up Bank Determination for Payment Transactions
    1.1.12.6 Create Check Lots
    1.1.12.7 Create Program Variants for RFFOUS_C     
    Along with above we need to do LSMW for GL a/c company code data have to upload, and foreign currency Configuration require...!
    I hope this info will helpful to you..!
    Rds,
    ANil

  • New company code creation in sap

    Dear Experts
    I want to configure new company code in sap. can anybody share the templates for data collection, which are required during company code creation and configuration steps to be followed for the same.
    Thanks
    Venugopal

    Hi Venugopal,
    For all configuration questions please use help.sap.com
    Thanks.
    Sebastian

  • New Company Code Creation Problem

    Hi Experts..
    We are having 10 company codes, i got a requirement to create another company code.  I have used one of the earlier company code to create a new company code.
    It is giving me the following error while trying to post a document in a testing server.
    <b>Could not determine the year for TDS Certificate number range</b>
    Message No: 8I017
    Diagnosis
    The excise year could not be determined for generating the numbers for TDS Certificates. The number range is linked to the excise year and not on the fiscal year directly.
    Procedure
    Check the customizing done for the company code in the India Version IMG.  Maintain the start month for the excise year correctly.
    Please provide me your valuable inputs on this.
    Thanks
    Kiran

    Hi Naveen
    Thank you so much for your reply...
    The company code which i have choosen to copy is functioning properly in the production server.  That is why i have copied.  I need to create some more company codes..  Creation of codes involves from the scratch involves lot of work.
    Please guide me how to rectify the error.
    Thanks
    Kiran

  • MR8M creation of new reason code and editable description

    HI,
    We want to create new Reason code in MR8M transaction. After creation of reason we want to editable reason description when we select this.
    Please suggest me.
    Thanks
    Shital

    Hi Shital,
    You can insert the reason code in table T041C, from SPRO -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Adjustment Posting/Reversal -> Define Reasons for Reversal...
    but you cannot change everytime the description in MR8M
    Thanx & Regards
    Mauro

  • Impacts of new company code currency

    Hi Gurus,
    We have a company code which is setup 2 months back. We have it setup with USD and this company code is assigend to a controlling area in one -one basis. So it should be fine . But now business want to change the CCode currency.  All G/L and master data is created with USD.  What would be the impacts if we change currency of master data also into new currency?  We have no New-GL . We used special ldgers but just for a specific activity.
    Any thoughts ?
    Thanks,
    GB

    Hi GB,
    If there is no transaction data posted in your company code then you can change the company code currency and in GL Mater data. But if transaction data is already been posted then its better to create new company code with new GL Master data and currency setting and upload transaction data posted in last two months.
    Regards,
    Santosh

Maybe you are looking for