Impact on transactional Loads if Master data is not loaded

Scenario for your reference:
The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21. 
I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
And how can i find out the impact and correct the transaction data if it does?
Can any 1 help me with this?

Hi,
If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
So, first load the master data and run the attrib change run process.
After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
If delta loads are there, you might need to performa  full repair.
Regards,
Rahul

Similar Messages

  • Master Data is NOT Loaded correctly, but  PSA has correct data

    Hi all,
        We have transported  the Master Data Attribute 0CPR_PROJEC (cProjects: Project) from DEV to QA system. There is no problem with data in DEV, but we are having the problems in QA.
        In QA, the data is BLANK for couple of Attributes (RSA1 --> Right Click  --> Maintain Master Data), but these Attributes are having the data in PSA level.
        We have verified the Transfer Rules & Update Rules and these are same in DEV and QA.
       What could be the problem, PLEASE?
    Thanks in advance.
    Regards.

    Hi Venkat,
          Could u pls tell me where u ran tha RS_TRANSTRU_ACTIVATE_ALL .so that if i get the same probs i will follow same steps
    Regards
    sneha

  • Why we load Master data first before loading Transaction data

    Hi Experts,
    why we load Master data first before loading Transaction data, specify any reasons for that ? Is it mandatory to load MD first ?
    I will allocate points to those who help me in detail. My advance thanks who respond to my query.
    Edited by: Nagireddy Pothireddy on Mar 10, 2008 8:17 AM

    Hi Nagireddy,
    I hope this helps....
    The bottom line for building cubes it to view facts against dimensions. When i say facts these are the key-figures i.e sales volume, Sales vat etc against some characteristics like sales Area,  Cost center , plant.
    Basically charateristics are those against which key-figures are measures like Costcenter, plant, material etc.
         Dimensions are a grouping of related characteristic. So basically a cube has a central fact table with dimesions associated to it in a relational schema. Imagine now you want to view a key figure Sales Volume against a dimension plant. when you consider plant , it has a distribution channel, purchasing organisation , company code, sales area, region etc associated with it. So which form the attributes of plant and also have some or the other description (texts) and aslo hierarchy. first we load the master data and then the transaction data follows.

  • Error while loading  the master data

    Hi Masters,
              When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    No Idocs arrived from the source system.
    Could you please help me...
    Thanks & Regards
    Raja.S

    Hi,
    Check the TRFC log.
    You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Removing errors:
    If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
    Resolutions:
    Reload the Master Data manually again from Info-package at RSA1.

  • Loading InfoObject master data into Cube

    Hi Guys,
    I have a  question. I created an InfoObject as a data target and loaded data into that data target. I created a cube and I want to include this infoobject in the cube. Now How do I load data into this cube from the InfoObject.Because the InfoObject doesnt have any option to select data targets, since it is master data.
    Data is being loaded into the InfoObejct. But when I check the cube there is no data.
    How do I load this master data into the cube without update rules?
    Thanks in advance.

    Hi,
    i think u need load some value to transaction data so that you can report on it, but how you are going to decide which row will be having which value from master data? in general value for this should come from transactional data, or you could assign some constant value to it.
    Do you want to use any attribute of Inoobject in report? And if you have any key value for that coming from Transaction data, you can use rule type as read from master data
    It depends upon your requirememt.
    Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
    In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object into the cube.
    As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
    Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
    In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
    You have to get the value of your infoobject into Cube from datasource, even though you want to use attributes only.
    You will have to add it and it wont have any effect the transaction data getting loaded into the cube will be different from the master data only SID's are matched during loading of the data.
    You should load separate master data into the 0recontract infoobject with the master data source and make the respective object contract type and contract category as navigation there.
    Also you should add 0recontract to the cube and update it from the transaction data source as you have said that it can be updated.
    Then just do the normal restrication at the report level
    You can make this display attribute as naviagatioonal first in the master data object and then in the cube make this attribute as navigational.
    then you can use it to restrict in the cube
    You can use Category as InfoObject in your cube, and while loading data for your infoobject in the rule type you can use option as reading from master data. It will take key of infoobject, and will update attribute value in your cube.
    http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
    You can also restrict with attributes value, Just in the restrcition of your infoobject in query designer, slelect left-botton button of 'Dipaly Other Values', here you can select you attribute and its value for restriction as well
    Regards,
    Hareesh

  • DIM IDu0092s are polluted only when we load the Master data and SIDu0092s

    DIM ID’s are polluted only when we load the Master data and SID’s are polluted only when load the retraction data. System automatically performs the reconciliation of DIM and SID’s  when we delete the transaction and master data.
    a.     True
    b.     False

    Hi,
    You can use the mapping section of the transformation file for this purpose. It should be something like:
    *COL(5) + *Str(_) + *COL(1)
    I am considering that the 5th column of your file is the property. The 1st column is the ID.
    Please take a look at the below link for more information:
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/5d/9a3fba600e4de29e2d165644d67bd1/content.htm
    Hope this helps.

  • Loading new master data

    Hi experts!!!
    I am going to load new master data in our BI.Our BI consists of some cubes and DSOs which have data from past 3 years and which are based on old master data.Now the Master Data is completely changed to new values and will be loaded into our BI.I have following doubt regarding this:
    From past three years the transaction data that is loaded into our cubes and DSOs is based on Old Master data.Now if I suddenly load NEW master data values,what will happen to this old transaction data loaded until today?I can imagine that once I load new values,from now onwards,transaction data will be based on new values only.The question is what will happen to the old transaction data ?
    Please assume both cases of Time Independent Master data and Time Dependent Master data while reading my question.
    Thanks for your time.

    Hi,
    Case1 (normal case, happens frequently) - Only attributes of master data has changed.
    Your transaction data would reflect the old master data when you have master data lookups or reads on master data table (P, Q tables for time indep/time dep MD) for populating master data in the transaction data flow.
    In case just the attributes on the master data objects like Customer/Material have changed and these are used at the query level, the queries would show the new attribute values. In case the time validity/dependency has changed, the new time validity takes effect. For e.g Person X is respnsible for cost center A from 01/01/2010 till 31/12/2012. Now MD gets changed and Person Y is responsible for Cost Center A from 01.01.2011 till 31/12/2015. If the report is run now, the person Y would be shown in the report.
    Case 2 - The master data has big changes in the source system. for e.g. Cust 10000 is now 11111 or material 12345 is now 112233.
    In these cases your historical transaction data would be showing old master data.
    For e.g Person X is respnsible for cost center A from 01/01/2010 till 31/12/2012. Now Cost center A is changed to B and person Y is responsible for the same period. Old transactions with Cost center A shows X as responsible and new transactions with Cost center B shows Y as responsible.
    Even if your master data has changed completely, there would not be any affect on the existing transaction data....as new master data entries would be written to the tables and the existing master data remains.

  • Simple basic question on attribute data load for Master Data InfoObject....

    Hi
    I am a bit confused & wanted to have some clarification on the following:
    1) For loading Attributes data to Master Data InfoObject, we load it through Data Source of Type Master Data Attribute.
    But what i did, i created Data Source of type Transaction data and using the same Excel file, i was able to create transformation with Matser data Attribute and was able to load the data.
    This shows i can use Data source of type either master data attribute OR Transaction Data doen't matter while loading into master data attribute. IS THIS TRUE?
    2) I have 2 master data infoobjects (Test1 & Test2). I made Test2 as an attribute in Test1.
    My question is while loading Master data for Test1, will it also load the data into Test2 if it doen't find respective data in Test2?
    (i did all the transformation as per need.)
    Waiting for your reply....
    Thanks...

    HI Harpal,
    1. Did you make a transformation between attribute data source from source system other than flat file and DSO?...
    I think PC File is flexible in this aspect..
    2.While loading Test1 the infoobject Test2 will get loaded only if it is a navigational ttribute..(You can see this by refering the SID Table)
    Please also note that it does not load Test2 attributes.
    regards,
    Rakesh.

  • Transction data loading with master data as key?

    Expert's,
    I am trying to load the transction data with master data as a key.ZEMPID is my masterdata which having attributes ZEMPNAM and ZEMPDES .My transction data contains ZEMPID.ZEMPSAL and ZEMPAGE.I could create the master data and also load it successfully.But when I tried to create the infosource for trasctional data I should get all the attributes whatever I have given it for the ZEMPID.This I am not getting.Also While creating the cube if I select the infosource then in chraracterstic tab I am not getting my characterstics(master data+attribute).Please any one help me.

    Hello Vasu
    You are talkin abt transactional data and saying that not created cube/Ods ..
    Let me put the things again
    1. When you load master data you create infosource ( direct or indirect), All the attribute will be automatically comes in the infosource...when you define application component in master data tab in infoobject maintenance it is ready for data to be loaded. Search for application component in infosource..u will get the flow
    2. When you load data in infocube only transactional data goes in it.....master data presents in master data tables...In infosource you define what are the field which need to be present in cube.......so you will be able to include only these objects which are present in cube dimensions + attribute which are defined navigational in the cube....
    Master data attribute will never be pushed automatically....only componding object are pushed automatically.....
    If you want to load attribute of ZEMPID then make them navigational in cube or add them in one of cubes dimension...
    Hope i could make myself clear
    Thanks
    Tripple k

  • About delta loading for master data attribute

    Hi all,
    We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
    1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
    2. Could you please let me know the detailed procedures to perform this delta loading again ?
    Thanks a lot

    Hi...
    1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
    Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
    1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
    2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
    3) then Delta.......
    2. Could you please let me know the detailed procedures to perform this delta loading again ?
    1) Make the QM status red.........to set back the init pointer.......
    2) Repeat the load.....
    After that.........if again load failed with Update mode R.....
    1) delete the init flag.......
    2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
    3) then Delta.......
    Regards,
    Debjani.....

  • Error in Loading Project master Data into BW from R3

    Hi Experts,
    Actually I am trying to load Project Master Data from R3 to BW through a BW Process chain, Its a daily activity which we are performing since long time.
    But since last 2 days loading is getting failed with an error in ST22 in source system (R3):
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Exception              CX_SY_REF_IS_INITIAL
    Date and Time          27.09.2011 01:47:15
    Short text
         Access via 'NULL' object reference not possible.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "CL_CGPL_TASK==================CP" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
         caught in
        procedure "PREPARE_FOR_RELOAD" "(METHOD)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component (variable: "ME->OUTLINE_PARENT").
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.
    I tried to reload the data but no help, I am not sure how to reolve this issue, I also contacted to BASIS even they are not aware of this error.
    I am seeking help from you guys.
    Please help to overcome this problem...!
    Thanks.

    it seems basis issue
    howver check below links
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/objects_objref_not_assigned-1793688
    OBJECTS_OBJREF_NOT_ASSIGNED error in a background execution
    thanks
    pathak

  • SAP BPC 7.5: Master Data and Hierachiy Load from InfoObject

    Hallo Forum Participants,
    I am going to load Master Data from a "Clarity" Reporting Tool in BW to SAP BPC 7.5 via Process Chains (/CPMB/IMPORT_IOBJ_MASTER, /CPMB/IMPORT_IOBJ_HIER) delivered from SAP.
    These Process Chains load the Master Data and Hierarchies from an InfoObject. To find out more about Ticking of BPC I have performed a following test. So, on BPC Admin Interface I have duplicated the Dimension u201CAu201D and called it as Dimension u201CBu201D (in BW site InfoObject u201CAu201D and u201CBu201D). In the Member Sheet of Dimension u201CBu201D I have implemented the several changes und tried to load Master Data from BW namely from infoObject u201CBu201D into BPC Dimension u201CAu201D. Therefor I created a transformation file and mapped one for one IDu2019s. The data Manager started these chains, but resulted nothing (Status: red X).
    What are the features of BPC InfoObjects in Comparision with regular InfoObject?
    How can I load Hierarchies into InfoObject?
    What else I must take into account?
    Why does not work this simple test?
    Regards.
    Alisher
    Edited by: Alisher Babaev on Jan 6, 2012 1:59 PM

    Hallo pkrishna,
    so it is successed with master data load, but without hierachiies.
    My Master Data Properties on Dimension Sheet are:
    -ID
    -EVDESCRIPTION
    -PARENTH1
    -CURRENCY
    I have mapped as below:
    ID=ID
    CURRENCY=/CPMB/CURR
    /CPMB/CURR- my technical id in BW.
    In the Note you advised transformation file has been mapped like below:
    -NODENAME=NODENAME
    -HIER_NAME=HIER_NAME
    -PARENT=PARENT
    -ORDER=ORDER
    After executing of package i get whether rejected list or log file. No data can be retirieved from InfoObject.
    Have you any Idea?
    regards

  • Error while loading  0Plant master data in PSA

    Hi,
    i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
    <i><b>'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked'</b> .</i>
    We are not using SD module and so no sales organization data is maintained have through a couple of posts  posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.

    Hi,
       The issue is due to errorneous record.
    Delete the request in Master data and Try the following.
    1) Goto PSA --> filter the Status (Red or Green)
    Select the Red records and correct the data in which error is throwm.
    After correcting the data, save and Right click PSA and give Start update immediately.
    2) Load via Infopackage only to PSA and later update from PSA and check.
    Any one of the above 2 methods will solve the issue.
    Regards,
    Balaji V

  • Error when loading the master data

    Hi all,
    Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
    Thanks in advance.
    Regards,
    Shaik.

    Hi,
    Please go through the following threads:
    PERFORM_CONFLICT_TAB_TYPE  shortdump during data loading into ODS
    Perform_conflict_tab_type error
    PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
    Next time you might want to just search the forum first... lots of surprises!
    Hope this helps,
    Cheers,
    Gimmo

  • 'Overlapping Time Intervals' error while loading the Master Data

    Guys,
              Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
    This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
    If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
    Below is an example of how the data looks like.
    FRSITM         Valid To                  Valid From                 Edition
    1001             12/31/9999             04/01/2010                2010.1.1
    1001             01/31/2010             03/01/2010                2010.1.2
    1001             12/31/9999             02/01/2010                2010.1.3
    In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
    And also I see that the Edition is not the Key Field.
    Any suggestions or ideas? Appreciate your help.
    Thanks.

    FRSITM Valid To Valid From Edition
    1001 12/31/9999 04/01/2010 2010.1.1
    1001 01/31/2010 03/01/2010 2010.1.2
    1001 12/31/9999 02/01/2010 2010.1.3
    1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
    2. if system comes across two same records it picks up the latest one.
    3. It shall merge the timelines is overlap is found.
    4. I hope Edition is time dependent attribute
    I believe infoobjet key is FRSITM Valid To.
    In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
    have a look at Q table and you shall be able to figure out for your self.
    Hope it helps
    Vikash

Maybe you are looking for

  • Can I see a pie chart of hard drive content?

    Hey everyone, Is there a way that I can see how my hard drive space is being used? It's almost full and I don't know exactly what's taking up so much space. Thanks!

  • "Download Error" in Creative Cloud App

    Help! Creative cloud no longer shows the apps that need to be updated. It just gives me this message "Download Error. Press retry to try again or contact customer support." Every time I click on "Reload Applications," it just gives me the same messag

  • How to create creative, unique "motion" typography

    Hello Apple Support Community friends, Please bear with me, I am new with Motion 5 along with Final Cut Pro X. I would like to learn how to create interesting use of "motion" typography in Motion 5. And how to import the finished Motion project file

  • Siri can't distinguish between Ginny and Jenny

    My wife's name is Ginny but Siri hears that as Jenny. If I say those two names alternating them in sequence, Siri returns a list containing only Jennys.  I have updated Ginny's contact entry to reflect she is my spouse, but the problem still persists

  • What are the trial version limitations of PE8?

    What are the limitations of the trial version of PE8? I'm wondering if I can burn a project for now or if there's a limit placed on the trial version of PE7. I do intend on buying unless it seems a bit klunky when doing choppy projects.