Impact on using function modules that are flagged as obsolete
Hi Gurus,
I'm working on a SAP 4.7 instance and we are soon to be going Unicode enabled. I noticed when running transaction UCCHECK that there are a number of function modules such as "POPUP_TO_CONFIRM_WITH_MESSAGE" and "POPUP_TO_DECIDE" as well as others that are flagged as obsolete, I'm not sure why these are not picked up in UCCHECK. However, can someone tell me what the impact would be if these obsolete functions were left as is and not changed?
Thanks in advance
C
Thanks for your responses, I agree with you both.
my view was that after we go unicode enabled all function modules that are flagged for deletion will still perform as they do now, however, as Praveen says this may not be the case in later versions.
Thanks
C
Similar Messages
-
How to lock transaction using function module or something like that
Hi, all
I'd like to know the way to lock transacitons using function module or something like that.
I know this would be possible if calling transaciton SM01, but I want to know other ways like calling function module (BAPI ) or method.
Thank you for your cooperation In advance.
Regards,
Hideki KozaiHi,
Try the following FM
BRF_NETWORK_GRAPHICS BRF: Network Graphics for BRF Objects
BRF_INITIALIZE_GRAPHICS_NGR BRF: Initialize Network Graphics
BRF_NETWORK_GRAPHICS_NGR BRF: Network Graphics: Start
BUSG SAP Business Graphics
GRAPH_2D Calling up the 2D business graphics
GRAPH_2D_MENUE DO NOT USE (use 'GRAPH_2D' and 'GRAPH_BUSG_MENU_SET')
GRAPH_3D Calling up the 3D presentation graphics
GRAPH_BUSG_COLOR_SET Definition of color pallets for business graphics
GRAPH_BUSG_MENU_SET Pushbutton menu (tool bar) for all BUSG modules
GRAPH_MATRIX Calling up SAP Business Graphics (2D, 3D and 4D)
GRAPH_MATRIX_2D Calling up the 2D graphics (user-friendly version)
GRAPH_MATRIX_3D Structure of 3D graphics (user-friendly version)
GRAPH_MATRIX_4D Calling up a 3D graphic (4th dimension stacked representation)
Regards, -
Reg: Function Module thats used to check the status of JOBS and mail it
Hi Experts,
Is there any Standard Function module thats going to find the status of the jobs and mail this status to specied email ID in .xls format. While checking status function module should give whether job is - Aborted, Successful, Running, Waiting, Locked, Error, Warning, Starting Date, Ending Date of the Job.
Please help me,Hello Nagaraj,
You can find out the status of a job with the SHOW_JOBSTATE function module. You provide this function module with a job name and job number. It returns one of the six possible statuses of the job:
ABORTED TYPE C,
FINISHED TYPE C,
PRELIMINARY TYPE C,
READY TYPE C,
RUNNING TYPE C,
SCHEDULED TYPE C.
Following is the link for the same:
http://help.sap.com/saphelp_sm32/helpdata/en/fa/096e10543b11d1898e0000e8322d00/content.htm
Warm Regards,
Riki Dash -
R/3 Master Data Extraction Using Function Module
Hi Experts,
Could you please let me know why & How (Detail procedure) to extract R/3 master data using function module.
My team manager asked me to extract master data from R/3 for 3 more attributes of info object '0material' which is already defined as data target.
I would like to know why they are extracting data using function module
ThanksThe steps for creating extractor using Function Module. I
1. Create new Function group (if you have already not done so) in Se80
2. Copy Function module "RSAX_BIW_GET_DATA_SIMPLE" with suitable name.
3. Change the code that populate data.
Following table may give you the guideline for parameters.
Parameter Description
I_REQUNR (import) BW provides this request identifier. It is a system-generated identifier in the form REQU_XXXXXX. BW uses this same identifier in all function module calls that relate to a single load.
I_DSOURCE (import) The name of the generic extractor
I_MAXSIZE (import) The maximum number of records that BW expects to be in each data packet
I_INITFLAG (import) A Boolean flag that indicates if this is the initialization (first) call to the function module
I_READ_ONLY (import) A test flag not needed in most extraction scenarios
I_T_SELECT (table) This table holds any selections from the BW InfoPackage. The function module should examine these selections and only return data that matches the selections.
I_T_FIELD (table) This table holds the fields that BW requests
E_T_DATA (table) The function module fills this table with data records. These records then return to BW as data packets. This table has the same structure as the extract structure defined in the generic DataSource.
NO_MORE_DATA (exception) The function module raises this exception when no more data is available
ERROR_PASSED_TO_MESS_HANDLER (exception) The function module raises this exception if an error occurred during the extraction. It alerts BW to check for error logs.
Change following code to put the selection fields
Select ranges
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
L_R_CONNID FOR SFLIGHT-CONNID.
Change following to populate data
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
WHERE CARRID IN L_R_CARRID AND
CONNID IN L_R_CONNID.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
below links
Re: functionmodule
Re: FM for G. extractor
***Assign points if it helps.**
Regards
CSM Reddy -
What is the Function MOdule that returns the fields in database table order
Hello Folks
I have a dynamic internal table with fields ( which are not in order). I want to display them in the order of which they are present in the database table? Is there any function module that returns the fields in database order?
FAQ. Please search before posting your question.
Edited by: Suhas Saha on Oct 10, 2011 10:19 PMHi,
You can use this BAPI.
<b>BAPI_SALESORDER_GETLIST</b>
Reward if useful.
Regards,
Vimal -
How to Send Internal table to SAP Spool using Function Modules or Methods?
Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
KiranThis is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
MY_MONTH type T549Q-PABRP,
STR_MY_MONTH(2) type C,
MY_YEAR type T549Q-PABRJ,
STR_MY_YEAR(4) type C,
CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
CMD like PC408-LTYPE value '/:', "command
TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
DOCDATA like SODOCCHGI1,
OBJTXT like SOLISTI1 occurs 10 with header line,
OBJPACK like SOPCKLSTI1 occurs 1 with header line,
RECLIST like SOMLRECI1 occurs 1 with header line,
OBJHEAD like SOLISTI1 occurs 1 with header line,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_buffer type string,
l_no_of_bytes TYPE i,
l_pdf_spoolid LIKE tsp01-rqident,
l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
spool_id type rspoid,
line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
ITAB-PERNR = P0001-PERNR.
ITAB-ABKRS = P0001-ABKRS.
ITAB-ENAME = P0001-ENAME.
ITAB-USRID_LONG = P0105-USRID_LONG.
append itab.
clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
and FPBEG ge W_BEGDA
and FPEND le W_ENDDA
and SRTZA eq 'A'.
* Produce payslip for those payroll results
if SY-SUBRC = 0.
call function 'GET_PAYSLIP'
EXPORTING
EMPLOYEE_NUMBER = ITAB-PERNR
SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
PAYSLIP_VARIANT = PAY_VAR
IMPORTING
RETURN = RETURN
P_INFO = P_INFO
TABLES
P_FORM = P_FORM.
check RETURN is initial.
* remove linetype from generated payslip
loop at p_form.
objbin = p_form-linda.
append objbin.
line_cnt = line_cnt + 1.
endloop.
file_length = line_cnt * 1022.
* create spool file of paylsip
CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
EXPORTING
i_file_length = file_length
IMPORTING
e_spoolid = spool_id
TABLES
it_textdata = objbin.
IF sy-subrc EQ 0.
WRITE spool_id.
ENDIF.
DESCRIBE table objbin.
DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_id
NO_DIALOG = ' '
DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
TABLES
PDF = pdf
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\itab_to_pdf.pdf'
filetype = 'BIN'
TABLES
data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
OBJHEAD = 'Objhead'.
append OBJHEAD.
* preparing email subject
concatenate W_ENDDA(6)
' Payslip-'
ITAB-ENAME+0(28)
ITAB-PERNR+4(4) ')'
into DOCDATA-OBJ_DESCR.
DOCDATA-OBJ_NAME = 'Pay Slip'.
DOCDATA-OBJ_LANGU = SY-LANGU.
OBJTXT = 'Pay Slip.'.
append OBJTXT.
*prepare email lines
OBJTXT = DOCDATA-OBJ_DESCR.
append OBJTXT.
OBJTXT = 'Please find enclosed your current payslip.'.
append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
clear OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = 3.
OBJPACK-DOC_TYPE = 'RAW'.
append OBJPACK.
* Create Message Attachment
ATT_TYPE = 'PDF'.
describe table OBJBIN lines TAB_LINES.
read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = ATT_TYPE.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Payslip'.
append OBJPACK.
* Create receiver list refresh RECLIST.
clear RECLIST.
RECLIST-RECEIVER = itab-USRID_long.
translate RECLIST-RECEIVER to lower case.
RECLIST-REC_TYPE = 'U'.
append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
call function 'SO_DOCUMENT_SEND_API1'
exporting
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
tables
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = pdf
CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = RECLIST
exceptions
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
others = 8.
if SY-SUBRC NE 0.
ITAB-MTEXT = 'Message Not Sent to : '.
else.
ITAB-MTEXT = 'Message Sent to : '.
endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
else.
"SY-SUBRC Not = 0
ITAB-MTEXT = 'Payroll data not found : '.
endif.
"end of SY-SUBRC = 0.
modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
at new MTEXT.
uline.
write : / ITAB-MTEXT color 4 intensified on.
write : / 'Emp. Code' color 2 intensified on,
12 'Emp. Name' color 2 intensified on,
54 'Email ID' color 2 intensified on.
endat.
write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop. -
Error occurred while loading Generic extraction using Function module
Hi all
I'm trying to do INIT for Generic Extractor using Function module, but i'm getting error as "Error occurred in the source system"
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Job terminated in source system --> Request set to red
Message no. RSM078
Can u help plz....Hi Vishnu
This are the Job log details i found in source system...Can u tell what whould be the problem?
Message
Job started
Step 001 started (program SBIE0001, variant &0000000002861, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZYFI102
RLOGSYS =
REQUNR = REQU_D9Y4CZDQULRIHRRVU33KOLQZO
UPDMODE = D
LANGUAGES = *
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 0 *
abap/heap_area_total.......... 10737418240 *
abap/heaplimit................ 40000000 *
zcsa/installed_languages...... DE *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 3000000 *
ztta/roll_extension........... 2000000000 *
No authorization for Acct type D
Job cancelled after system exception ERROR_MESSAGE
Thanks in advance
Edited by: MohanDP on Feb 25, 2011 11:58 AM
Edited by: MohanDP on Feb 25, 2011 12:01 PM -
Error message when using function module HRIQ_TESTRESULTS_CREATE
Hi,
I need your help, I'm trying to use function module HRIQ_TESTRESULTS_CREATE to create external test results, I've used this function before without subscores, now I need to create subscores, but I get the message: "Grading scale UBID applies".
The test type EXAM_UB_ING has assigned the UBID academic scale, which has a range from 1 to 677. Test type EXAM_UB_ING has 3 subtests (grammar, listening and reading) which also have the UBID academic scale assigned.
I think this isn't a customizing problem because I can create test results with subscores using the PIQST00 transaction, the error message happens just when using the function module.
I'm using this import parameters:
STUDENT:
PL: 01
OT: ST
OBJID: Student ID
TESTRESULTS_HEADER:
ISSUEDATE 08.02.2010
VALIDDATE 30.04.2010
TEST_GUID
TESTEO 50000269
TRANSEO 00000000
TESTTYPE EXAM_UB_ING
SESSIONID T1
SESSIONYEAR 2010
ENTRYDATE 08.02.2010
TESTPASSFAIL
TESTTOTRES 458
TESTSCALE_ID
TOTALPERCENT1 0,00
TOTALPERCENT2 0,00
ENTRYMODE
SUBTY
Table TESTRESULTS_SUBSCORES:
SUBTESTID GRAMMAR
SUBTESTTRES GRAMMAR
SUBT 203
SUBTESTID READING
SUBTESTTRES READING
SUBT 120
Does anybody know which could be the error? Or any other function module which I can use? (with HRIQ_TESTRESULTS_PROCESS_DATA I get the same error message).
Thanks in advance!
AraceliAraceli,
I just noticed. You are populating SUBTESTSCALE_ID in subtest result structure.That's the reason it's throwing this error. it is trying to match Scale ID from test with value in sub test result scale ID.
Prabhat Singh -
Error with quantity field:Datasource Creation Using Function Module method
Problem with DATASOURCE Creation using Function Module method :
I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
Let me know if my explanation is not clear enough.
Thanks in advance,
Neha.
Z table definition is as below :
MATNR MATNR CHAR 18 0 Material Number
BWKEY BWKEY CHAR 4 0 Valuation area
LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
STPRS STPRS CURR 11 2 Standard Price " Here the currency field is WAERS and table T001
PEINH PEINH DEC 5 0 Price Unit
VJSTP VJSTP CURR 11 2 Standard price in previous year
VJPEI VJPEI DEC 5 0 Price unit of previous year.
Edited by: Neha Rathi on Jan 30, 2009 3:03 PMHi,
You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
also if you want to populate it then you will have to write the code for this fields as well.
Thanks
Ajeet -
Code For Delta Extraction Using Function Module
Dear Experts,
I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
[email protected]
Best Regards,
SGK.Dear KJ,
Thank for your response. I saw the code that you sent, you have used some ztables like ZSC_DELTA_IP, ZSC_SAFETY_DELTA, ZSC_SET_EXT_TIME
What are the fields that you have created in these tables , what is use of these tables, can you send the fields that you have used in these tables.
Thanks & Regards,
SGK -
Creating Attachment using Function Module
Hi experts,
My problem here is, I need know the Function Module that is used to Create Attachement in Generic Object Services.
Currently, i only found this function module: SO_OBJECT_UPLOAD. But i do not really know how to use it.
Can anyone here advise?
Thanks
LawrenceThis blog: [/people/sergey.breslavets/blog/2007/06/29/create-and-handle-attachments-from-a-bsp-application ] describes how this works for a BSP app. If you scroll down to Method: handleupload and look at item (2) and (3), the describe the basic ABAP parts in this. The functions used here are the same ones used by the Generic Object Services.
-
Function Module that will retrieve the Field Catalogs of a Display Variant
Hello Experts,
Are there any function modules that I can use to retrieve the field catalogs (fields to be displayed in ALV report) by passing the display variant name?
An RFC needs to apply this to determine which field(data) to be passed to XI (calling system) depending on user login.
Thanks in advance!These are the various FM available for Variants (field Layout)
REUSE_ALV_VARIANT_ALL_MAINTAIN Maintain all display variants for one object
REUSE_ALV_VARIANT_DEFAULT_GET Read default display variant (description only, w/o field catalog)
REUSE_ALV_VARIANT_EXISTENCE Checks whether a display variant exists
REUSE_ALV_VARIANT_F4 Display variant selection dialog box
REUSE_ALV_VARIANT_MAINTAIN Definition of a display variant outside the list context
REUSE_ALV_VARIANT_SAVE Save a display variant
REUSE_ALV_VARIANT_SELECT Read a display variant
Regards,
Amit -
Data transfer of Selected sets (QS51) using Function modules
Hi All,
I am doing data migration of Selected sets (TCODE QS51) using function module. I have tried using BDC recording but it is not working in background.In foreground it is giving information error on second screen as field RQSKT-AUSWAHLMGE is not present on screen 1000.. In foreground I am pressing enter after this error its working fine but in background the execution stops there. So I am trying function modules QPAM_SELSET_CODE_CREATE and QPAM_SELECTED_SET_CREATE
The fields in template I have are KATALOGART(Catalog), WERKS(Plant),AUSWAHLMGE(Selected set) ,KTX01(short text), STATUS(status),CODEGRUPPE(code group), CODE (code), KURZTEXT (short text for codegroup),BEWERTUNG(Valuation code), FEHLKLASSE(Defect class)
QPAM_SELSET_CODE_CREATE contains fields KATALOGART, WERKS,AUSWAHLMGE ,CODEGRUPPE,CODE which I need and While stand alone testing of this function module I am geting error as follows with the data filled :
Runtime: 6.496 Microseconds
Exception WRONG_KEY
Message ID: QS Message number: 299
Message:
No entries were found in catalog 1
MAN WERK K AUSWAHLM CODEGRUP CODE
300 WI10 1 DDTEST THREADS 1
QPAM_SELECTED_SET_CREATE contains KATALOGART , WERKS,AUSWAHLMGE , KTX01 which I need and it requires Language key fiels KSP01. I specified it it executes successfully but in transaction it is not there. some FMs contain some fields and not all fields so I want to know which one to use ? Can anyone give me sample code how to use these FMs?Note 381286 - Code grps + selectd sets:Transport request requestd
Note 592418 - Composite SAP note: Transport of code groups and codes
But I do not recommend a modification because the system does not generate request for that in the production system.
This means you can maintain catalog directly without transport in the production system.
Only development or test system ask you a request number.
Regards
Luke -
Function module that can give balances by segment?
Hi SAPs,
I need help to get standard SAP function module that can give me GL balances by segment, period and fiscal year. I tried the existing function module for GL balances - BAPI_GET_ACCBALANCES - but it does not support segment. Please let me know if you found any. I need to use it for group reporting requirement.
ThanksHi ,
We have aggregate functions in SQL. Some of the functions are as follows.
MAX(col ) Determines the maximum value of the value in the column col in the resulting set or in the current group.
MIN( col ) Determines the minimum value of the content of the column col in the resulting set or in the current group.
AVG( col ) Determines the average value of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
SUM( col ) Determines the sum of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
COUNT( col ) Determines the number of different values in the column col in the resulting set or in the current group.
For further details , type the function name name and press F1 for further help.
Eg: select count(mantr) from mara into workarea where condition.
Reward points if helpful.
Thanks and Regards. -
Is there any function module that brings out profile planner
Hello experts,
Is there any function module that brings out profile planner (I want to set planner profile as u201CSAP800u201D. I am using 7KE1 transaction.
Example: I know, the FM - K_KOKRS_SET_BATCHINPUT will set the controlling area to 'CTIC' for the entire batch input process.
Thanks in advance.look at these fms..
CACS_PROFILE_PARTNER_READ
CACS_PROFILE_SHOW
Maybe you are looking for
-
Itunes error says phone can't be updated because it doesn't have ITunes 11.1 or later
Ever since updating to ioS 7.0.2, I am getting an error message that says my phone cannot be used because it has an older version of Itunes. How do I fix this? I don't see a place to update just the Itunes software. Thanks in advance for your help!
-
HP Photosmart 5520 printer no longer prints wireless
Hello. I recently got an xfinity cable modem with wireless. (Xfinity/comcast promoted it should be faster...I am seriously doubthing that!) Before this cable modem, I was printing okay with a Netgear router. Never an issue with it. Now with the co
-
Export selected photos with comments
How does one export selected photos (or an album) in such a way that when someone else imports them (on a different computer), the comments are preserved? That is, the recipient gets to see in their iPhoto the comments that the originator added in th
-
Reader caching credentials?
Maybe this belongs in a Reader forum somewhere but I arrived at the issue / question through testing LiveCycle Rights Management so I'm starting here ... I'm seeing some odd behavior accessing policy-protected documents. Adobe Reader appears to cache
-
A communication problem (sort of) between classes
Hi, Why, oh why, doesn't this work: When I select a row in my tableClass (consist of a JTable) I want to display these values (strings) in my TextFieldGUI class (consist of just JTextFields). My code looks like this: TableClass: public void mouseClic