Impact, things to check before changing transport Routes (TMS)
Hi all,
I am about to change the transport routes of our landscape, we have R/3 systems, R/3 portals, BW....
Soi would like to know exactly what will be the impact on the ongoing operation, what will happened with the already released transport, etc..
Could you please tell me what thing to check, typical things to do before changing the TMS to ensure that it won't cause any issue ?
Thanks in advance
Regards
Ipadair user wrote:
Will that dropping cause any effects on the warranty should we encounter any problems in the future?
If there is any evidence of a drop (deep scratch, dent, glass crack, etc), the Apple warranty will not cover any problems.
Cheers, Tom
Similar Messages
-
Just changed my router to airport extreme
My MacBook pro and iPad work fine but my VAIO wireless desk computer is not working.
It says
, the router does not support the network .check security setting.
Which of the security setting will I change?
Thanks for your help.John, thanks for the email so quickly.
I too hope I haven't tried "everything" either but I am reasonably technical. I had done what you suggested to do before but I did both again.
Ethernet is yellow in the left side bar. In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both. I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail. I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
Thoughts??? -
How to have a check on change bars and/or tags before generating a PDF
Hi All,
There were many instances where I have generated very huge books (over 1300 pgs), and realize that some chapter(s) (files) are printed along with the tags or the change bars on.
To resolve this, I had to go back and regenerate the same book after removing those properties which is cumbersome.
Is there any solution where I can have a check/popup, before generating the PDF, if any file(s) within a book has tags or the change bars on?
Thanks and regards,
SubhakarHi Michael,
Thanks for your response and apologies for not mentioning the FM version (9)
that I am using.
I am now able to clear the tags in all the files within a book by your
suggestion to:
1. Select all files within the book
2. Go to View and select
3. Select Show Element Boundaries (as tags)
This will show the element tags in all the files
4. Select Hide Element Boundaries. This option is visible and enabled only
when I select the Show Element Boundaries.
I am just curious and waiting for your response to have a check on Change
Bars.
Regards,
Subhakar
On Thu, Feb 3, 2011 at 2:29 AM, Michael Müller-Hillebrand -
Before Delete_record I want to check block changes
I want to check if the user made any changes before deleting the record how can I ?
when you update one record and then press delete record it will be deleted directly i want to check before delete if the user change the record data i should give message like ... You want to update or delete your recordHi!
You have to check each item for changes.
But you do not need to go to the item, just check the database value like:
declare
l_item varchar2(30) := get_block_property ( 'YOUR_BLOCK', first_item );
begin
loop
if
get_item_property ( 'YOUR_BLOCK.' || l_item, item_type ) = 'BUTTON'
then
null;
elsif
get_item_property ( 'YOUR_BLOCK.' || l_item, database_value ) != name_in ( 'YOUR_BLOCK.' || l_item ) OR
( get_item_property ( 'YOUR_BLOCK.' || l_item, database_value ) is null AND name_in ( 'YOUR_BLOCK.' || l_item ) is not null ) OR
( get_item_property ( 'YOUR_BLOCK.' || l_item, database_value ) is not null AND name_in ( 'YOUR_BLOCK.' || l_item ) is null )
then
message ( 'Record is changed. Do you want to to delete or ...' );
your_code ...
end if;
exit when l_item = get_block_property ( 'YOUR_BLOCK', last_item );
l_item := get_item_property ( 'YOUR_BLOCK.' || l_item, nextitem );
end loop;
exception
when others then message ( l_item || ': ' || nvl ( error_text, dbms_error_text ) );
raise;
end;Regards -
STMS-Transport Routes creattion
Hi Friends,
Please clarify my question regarding transport routes. We had total 4 systems in our landscpae like ECC-dev,Qas,Trn and PRD.
as usually the old transport connections are existed beteen "dev-qas" then "qas to trn" and "prd".Now we want to create new
transport route between dev to TRN directly due to new functional developement. I don't want to touch eixted connections
because these new transport route is temporary only. If I create this transport path between dev and trn, is there any impact to
existed connections? How can I create this path, Please advice on this .
Thanks.Hi,
I don't think you can add same system twice in transport routes.
And if you want to change existing one, check below link:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a2a27acc11d1899e0000e829fbbd/frameset.htm
Thanks
Sunny -
This wifi issue is bad, all other products I have work fine, but my iPad (fully update, re-installed, re-booted, etc...) will not work. Time to return it and switch to another vendor? Many of the solutions I see are change your router. I cannot change a Hotel router, a companies router! Please Apple fix this ASAP prem price and not working!
the iPad should work with most wifi routers. There are some old wife routers it may not. Your ipad coiuld have a hardware problem.
Does it work with some routers? Have you hung out in the lobby of the hotel and asked if other ipad users are having a problem. What does the hotel staff say?
You could carry a mini wifi router with you and connect the mini via ethernet cable.
Find the make and model of the wifi router. We can check if other ipad owners are having problem.
a 4g solution.
I recently signed up for FreedomPop.com. http://www.freedompop.com
FreedomPop provides 500meg of free 4g cellular data per month! You do need to buy their wireless device at $39. Your machine needs wifi capability. There are ways of getting bonus megs. One gig of addition data costs $10 per month. I used about 15megs per hour of lite internet surfing.
When signing up, you need to be careful with your selections. On some screens, the free option is a small link below the large button. FreedomPop employs a Pavlovian Dog < Operant conditioning > thing of getting you used to clicking on the large button then they change the large button to a paid add-on.
Once you setup your account, you need to go to your account options screen to turn off automatic paid data download once you exceed your quota.
The performance seems a little slower than my DSL connection.
http://www.freedompop.com/offers.htm?experience=organic.default
http://www.freedompop.com/coverage
Get it before they go broke.
Robert -
COMPUTE_BCD_OVERFLOW error while saving transport routes
Hi,
When we are creating new transport routes with domain controller ABC. It is giving the above dump.
Dont know what to do. FYI we deleted previous TMS config and created new one.
Thanks,
RohanCheck the values which you are passing to the BDC.. the data type should be changed for a field.
You can execute the BDC with mode 'A' & check.
Best regards,
Prashant -
Pre-checks for changing some material master data
Hi,
Are there any pre checks (ie. no open documents) needed when changing the following items via MM17:
1. Storage Location
2. Account Assignment Group
3. Transportation Group
4. Purchasing Value Key
5. MRP Group
6. Scheduling Margin Key
The materials have existing purchase orders and some have sales orders. Will there be any impact when the data are changed? Thanks.Hi,
You can not change the storage location for a material.but you can extend the material to another storage location.
other changes will not have effect on existing docs.
Try MEMASSPO to update open PO's with new storage location.Select EKPO and add storage location in selection fields.
Best Regards,
Raj -
New camcorder- final check before buying
An earlier thread helped me to decide which model to choose. I have settled on a Sony DCR-HC94E. ("E" is for "European".) It is said that FCE is picky about what cameras it will recognise. Therefore, the following are those parts of its spec. which I have detected from this forum as being important to satisfy FCE, and a few other features which suit my requirements. If anyone notices anything inadvisable, please shout. Thanks. Please note that I am not a professional and have not gone for a three-chip machine nor HD, on cost grounds.
Required by FSE:
Firewire. Actually, Sony’s iLink which is said to be Firewire although it has only 4 pins whereas Apple’s implementation has 6, the added two being for power. Sony tell me that when capturing, their camera must be connected to the mains and the four Firewire pins handle the data without trouble.
However, another point concerns page 15 of FCE’s “Getting Started”, which refers to “Apple Firewire” (the default) and “Apple Firewire Basic”, which “is a simplified device control protocol for camcorders and decks that aren’t compatible with the full Apple Firewire set. Using this protocol doesn’t affect the quality of the captured video or audio.” I am assuming that this is the same point above concerning 4/6 pins and that FCE will be happy if it turns out that the Sony iLink uses “Apple Firewire Basic”. Correct?
And that I will have Device Control?
In Easy Setup, should I select "Firewire Basic"?
The camcorder comes with a driver for the Mac, which provides for capture (presumably Device Control via FCE’s “Capture now” button).
DV, not MPEG.. whatsit.
miniDV tape cassette, not DVD, Hard Drive nor Solid state.
DV out. No DV in because, as I understand it, DV in is used for archiving video on to miniDV tape and I don’t think I would want that – I plan to archive videos on DVD as QT movies.
Sony say that the DCR-HC94E stripes a digital timecode on to the tape. I believe that FCE needs this.
Other Features (extract):
The chip is physically 16:9 and all its pixels are used in forming a 16:9 frame. If used in 4:3 mode, the pixels to the left and right are not used. I think that this is True Widescreen and not one of the compromise ways of achieving it by, eg., compression and subsequent expansion.
3.3 Megapixels “Advanced HAD CCD”.
10 times zoom (I would have liked more, but that’s life).
Manual focus, and full-range auto focus, White Balance (“Auto, Outdoor, Indoor, One-push”).
“Super SteadyShot”. (That is, anti-wobble control.) Electronic.
2.7 inch viewfinder LCD panel, 123,200 pixels
Low light performance - “Min. Illumination = 5 lux”.
Battery runtime = 2 hours.
No external mike (pity).
It is remarkably small. “What Digital Camcorder”, issue 77, has a praising review of the next model up (DCR-HC96E), the only difference being that the 96E has DV in.
Thanks for any observations before I plunge into my wallet and let the moths out.Tom, Martin and Ian:Re. DV in etc. Thanks.
Being an amateur, (and beginner in video editing) my videos will, I think, be family movies; editing a 50-year old 8 mm cine film converted by a video lab to a PAL DVD, which I have nearly finished; and probably making videos of the country district where I live for depositing at the county library for future use, perhaps 100 years from now (if human civilisation survives that long which I doubt); and possibly some simple training videos. I am not planning on making artistic movies.
What I have been doing (so far only with the converted cine) is to edit it, export it as a QT file and use Toast (Roxio) to burn to DVD as the distribution version. (Toast also allows "burning" to a Disc Image, for checking before wasting DVD-Rs). I then check the DVD on a stand-alone DVD player and a domestic TV. I am assuming that all my efforts will likely follow that route.
Tom (and others) said:
"You want DV in. It lets you record your finished movie back to tape."
But why would I want to do that? Archiving? But is minDV tape so long-lasting? DVDs may not last more than 20 years and will need refreshing (re-recording on current media) which decendants won't do but that's another story. To view and check the finished video? But wouldn't my method (QT, DVD player, TV, described above) do that for me? To dub from a TV broadcast or to transfer to VCR tape via A/V? I have a combo VCR/DVD set-top video recorder which can do both of those (in the second case by dubbing from the above-mantioned distribution DVD).And VCR tape is on the way out, at least in the UK (Dixons no longer sell tape or tape-based VCRs) but of course peoples' tape VCRs will remain working for, say, 10 years.
On the lack of an external mike, its a budget thing. Sony Centre said that the only detectable camera noise would be if the ambient sound was very low and as a result the gain was increased. But hopefully I could add a suitable ambient audio track as a sound bed (Tom's book, page 132) to drown it - music, general ambient, sheep.
I'm probably wrong, but not too proud to be corrected.
Meteorites, hmmm... As a pessiminst, they worry me, but hopefully I will be dead before one strikes! -
Unable to add transport route in HANA Application Lifecycle Management (XS)
Hi There,
When we are using HANA LM to create transport routes then routes are created but straight away it comes with following error message:
Internal Error: Transport Route(s) could not be retrieved.
We have checked that required roles are assigned to user. Roles are
sap.hana.xs.lm.roles::ExecuteTransport
or
sap.hana.xs.lm.roles::Administrator
Same works in DEV and PROD environment. I ran debug in Chrome and found that it is throwing an error when trying to run following:
http://XXXX:portnumber/sap/hana/xs/lm/core/transport.xsjs?enrich=true&_=XXXXXXX
After looking in HANA studio I have found that transport.xsjs has got following function which will throw above error on exception:
function retrieveTransport(req, res) {
if(!utils.checkForPrivileges(res, [ "sap.hana.xs.lm::Display"])){
return;
var item = utils.getItem(req.path);
var enrich = req.parameters.get("enrich");
var deleted = req.parameters.get("removed");
try {
if (typeof item === 'undefined') {
var transportRoutes = trans.readAllTransports(deleted);
if (enrich) {
enrichTransportRoutes(transportRoutes,deleted);
utils.setNoCacheHeaders(res);
res.contentType = 'application/json';
res.setBody(JSON.stringify(transportRoutes));
res.status = $.net.http.OK;
} else {
// retrieve transport path id
var tpath = trans.readTransport(item);
if (!tpath) {
utils.reportError(res, null, utils.getText("TRANSPORT_ID_INVALID", item));
} else {
res.contentType = 'application/json';
res.setBody(JSON.stringify(tpath));
res.status = $.net.http.OK;
} catch (ex2) {
utils.reportError(res, null, utils.getText("ROUTES_NOT_RETRIEVED"), ex2.toSource());
Please see attached chrome console log for more info:
I am able to retrieve information about this but I am not sure what is causing this. Your help will be really appreciated.
Regards
AngadI've also tried the following wlst:
createJCRFileSystemConnection(server='SERVER-MS1', appName='application', name='Repository', path='/APP/ContentRepository/')
But then i'm getting:
java.lang.UnsupportedOperationException: Could not find MBean operation "createConfig(java.lang.String)" for MBean registered under "oracle.adf.share.config:ApplicationName=application,name=ADFConfig,type=ADFConfig,Application=application" and implementd by "class oracle.adf.mbean.share.config.RuntimeMXBeanImpl"
Error in creating configuration with name "oracle.adf.mbean.share.config.runtime.webcenter.doclib.AdfDoclibConfig"
java.lang.UnsupportedOperationException: Could not find MBean operation "refresh()" for MBean registered under "oracle.adf.share.config:ApplicationName=application,name=ADFConfig,type=ADFConfig,Application=application" and implementd by "class oracle.adf.mbean.share.config.RuntimeMXBeanImpl"
An error occurred while performing "setAttribute" on "PrimaryConnectionName"
javax.management.RuntimeMBeanException: These mbeans encountered exceptions and may not have been saved
Repository- JCR -- Could not do this operation, the backing store for this context is read only.Edited by: Harry van Oosten on May 10, 2010 10:33 PM -
I did not do my research before changing my Apple ID from an outdated email address to a current one. I just changed and verified and though I was all set. WRONG! Now I cannot sign in to iCloud because it will not let me enter the new Apple ID. I read the 10/30/13 randers4 post to just change your Apple ID back then sign in and change it to the new email address again and then you can sign in, but I cannot change back to the prior email address Apple ID because that is no longer an active email account (or at least not mine). Any thoughts on how to get signed into iCloud when it does not allow me to type in the new Apple ID and the old Apple ID no longer exists.
I see that many people have asked, but no one has come up with a solution that I found.
Thanks for any help!This did not work for me. My old email account for iCloud still pops up on my screen every time I open my macbook. I've deleted it, reset it, every thing I can think of and it still shows up. I think six months of this is more than enough time to wait.
RDG -
ChaRM transport route, one development, 2 QA, 2 PRD system landscape
Hello,
We have a customer who has an ERP system with a transport route which is the following:
One single Development system which feeds, 2 QA systems and then 2 PRD systems.
We are to implement ChaRM and we want to customize the tickets so that every time you execute the import action of a transport request into QA (and later into PRD) both systems QA1 and QA2 are updated and later on with PR1 and PR2.
We would like to know how to support this scenario in Solution Manager using ChaRM. How do we set up the logical component at SAP, how we define the transport route and layers, and how we define the actions in the SDHF ticket.
I appreciate your help.
Regards
EstebanHello,
We set up a testing environment for change request management. In a solution manager we created five clients. One single development which feeds two quality systems, and final two production system. As it was said in the thread we used transport groups in the transport route. The development system feeds this transport group which feed to import queus in quality systems. We tested this transport route and transports worked well and arrives into both production 1 and production 2 systems.
Then created a logical component for that landscape, with five sytems. Then we created a maintenance project using that logical component. We created a maintenance cycle and then a task list was created which shows two delivery system, and the two productive systems. All the groups have the right actions.
However when we created a SDHF correction the system creates the task list only for 3 systems, not for the five of them.
we see that only action groups are created for development, quality 1, and production 1. No entries for quality 2 and production 2
We try to run the action which is in the general part of the task list to execute the import in multiple systems, it cames out with the correct selection of importing in quality 2 system because it is the transport group. However an error is raised saying that the actions for quality 2 are not there in the task list which is true. Finally, as short term solution, we were able to import into quality 2 and later on pr1 but done manually in the stms transactions which is not what we want to do.
Regards
Esteban Hartzstein
Edited by: Esteban Hartzstein on Aug 24, 2010 2:06 AM
Edited by: Esteban Hartzstein on Aug 24, 2010 2:07 AM -
What's the difference between transport route and transport layer
what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!
Hi,
Transport Layer in ABAP Workbench
The Change and Transport System supports the distribution of development
work on large projects across multiple SAP Systems.
The packages in each development system are grouped into one transport
layer.
The transport layer determines whether objects are assigned to a local
or transportable change request.
Use
Each of your SAP development systems is assigned a transport layer as
its standard transport layer. If you use Extended Transport Control, you
can assign different standard transport layers to certain clients.
You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o If a consolidation route originating in their SAP System is defined,
then the objects are assigned to a transportable request, and
transported into the consolidation target when it is released.
o If a consolidation route is not defined, the objects are assigned to
a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
Release 4.0A and cannot be maintained.
Regards
Ben -
ChaRM: transport route migration
Hi!
we have a lot of different transport routes with different transport layer and would like to implement ChaRM.
We have a lot of different transport routes with different transport layer where we assign the developer classes/packages.
Now we would like use ChaRM.
As we know ChaRM uses standard transport layer and transport route.
Therefore we plan to consolidate all the developer classes/packages assigning to none-standard transport layer and route and migrate them to standard transport layer and transport route
Questions:
1) Can some one confirm whether or not ChaRM uses the standard transport layer with standard transport routes?
2) Or is it possible to create own transport layer u201CZCRMu201D, assign them all the development class/package relevant for ChaRM and leave the other none-transport layer unchanged?
3) Can one development class/package be assigned to several transport layers?
4) Has some one experience dealing with the approach of migration?
(tcode SE16 --> T_DEVC)
It will be great get some information regarding these questionsu2026
Thank you very much!Hello,
We set up a testing environment for change request management. In a solution manager we created five clients. One single development which feeds two quality systems, and final two production system. As it was said in the thread we used transport groups in the transport route. The development system feeds this transport group which feed to import queus in quality systems. We tested this transport route and transports worked well and arrives into both production 1 and production 2 systems.
Then created a logical component for that landscape, with five sytems. Then we created a maintenance project using that logical component. We created a maintenance cycle and then a task list was created which shows two delivery system, and the two productive systems. All the groups have the right actions.
However when we created a SDHF correction the system creates the task list only for 3 systems, not for the five of them.
we see that only action groups are created for development, quality 1, and production 1. No entries for quality 2 and production 2
We try to run the action which is in the general part of the task list to execute the import in multiple systems, it cames out with the correct selection of importing in quality 2 system because it is the transport group. However an error is raised saying that the actions for quality 2 are not there in the task list which is true. Finally, as short term solution, we were able to import into quality 2 and later on pr1 but done manually in the stms transactions which is not what we want to do.
Regards
Esteban Hartzstein
Edited by: Esteban Hartzstein on Aug 24, 2010 2:06 AM
Edited by: Esteban Hartzstein on Aug 24, 2010 2:07 AM -
Function module/BAPI or standerd program to define Transport route
Hi All,
I am configuring the TMS configuration through ABAP program .
I am able to configure Domain controller, and able add system to it.
Now I am not able to define Transport route, Can anybody tell me how can I achive this?
Is there any function module/BAPI or standerd program for it?
Thanks,
SwarupHello
To check the BAPIS to related module go to swo1 tcode.
Thank u,
santhosh
Maybe you are looking for
-
Single table in Business model
Hello, Is it possible to have only one table in the business model. If I try to add just one table into my business model, I receive the following error during consistency check. I could find no help in documentation. BUSINESS MODEL test: [nQSError:
-
I am not able to open Psd files from Bridge into CS6? Under Open with... no option available for photoshop...only Firefox or Picture Viewer... Is there something wrong with my program? I am able to open files from MB, just not Bridge itself.
-
G'day, I need some help, i am trying to type into an adobe document using the typewriter function. However every time after i type the text vanishes. It is almost as if the text is white and vanishes into the background. This is not the case as the w
-
http://gentoo.neysx.org/mystuff/gorg/gorg.xml I am looking to use gorg (the XSLT processor for gentoo's website / handbook) to create an Arch Linux handbook. Hopefully someone will know how to easily change the ebuild into a PKGBUILD. Many Thanks
-
Buttons in some forms do not function since uprade to FF4; still a problem in 5
On aol.com for example the forward and back arrow buttons do not function when I click on them in the news section. When I try to click the submit payment button on the Verizon website it will not register. Hyperlink type buttons work fine but the is