Impacts for switching from Extended Classic to Classic in production

Hi,
Has anyone involved project that customer has switched from Extended Classic to Classic in production system?
SRM 4.0 is live in Extended Classic now.
Customer is going to upgrade and switch their production system to SRM 7.0 Classic.
Main process is
PS -> MM PR -> SRM Sourcing -> SRM PO (Extended) -> SUS PO -> SUS PO Response
GR, Service Entry and Invoice are handled in ERP
I see an issue if we switch SRM-SUS to MM-SUS, SUS PO is created before switch and PO Response is created after switch.
Do you have any lessens and learned topics for switching Extended Classic to Classic? Which documents have to be take care?
Regards,
Masa

I'm also interested in the same question. We plan on going from 5 Extended Classic to 7.1 Classic.

Similar Messages

Switching from extended to irror display

Hi. The screen of my MBP recently broke. When I connect it to an external monitor, it acts as an extended screen. However I want to change it to a mirror display. Since my screen is broken I can't log in or anything, however the rest of the laptop is fine. How do I switch from an extended to a mirror display in this case?

pooobrain wrote:
How do I switch from an extended to a mirror display in this case?
Try command-F1 (or perhaps command-fn-F1 for a laptop):
http://discussions.apple.com/thread.jspa?threadID=1393294&tstart=226

Best practice for switching from Windows vCenter to vCenter Appliance?

CrimsonKidA wrote:Mike Bailey wrote:
what are the limitations?
Also I was considering this for 6.0 migration, anything in 6 to be concerned about? or sticking with windows version still the best path..Our license is for 5.5 so moving to 6.0 vCenter Appliance isn't an option for us. :/ Do you not have a support contract? Something I would recommend for a production environment.

Does anyone have documentation on this? I cannot seem to find anything online, or it's depricated. I'm switching from vCenter hosted on a Windows Server 2012 R2 to the vCenter virtual appliance (both are version 5.5). I have already deployed the OVA but have yet to configure anything beyond basic networking. Can I export the config from our Windows vCenter, then import it into the vCenter appliance. Help appreciated....
This topic first appeared in the Spiceworks Community

Why is my CWButton LED switch from 3D Stye to Classic (saving or running?)

I was adding a LED to my Visual Basic form, and I switch the CWButton to a 3D Style LED. When I run the program the form shows it as a classic style. I convert it back to 3D.. then just save the form, it converts it back to classic style. I want to keep it in the 3D form.
Note: I have component works, LabView 6, CVI, etc (from Measurement Studios) installed.

Hello,
What version of Measurement Studio do you have installed? The 3D Styles are a feature of Measurement Studio 6.0, and you must have a licensed 6.0 or higher version of the Measurement Studio User Interface control installed in order to save the styles.
You can check the licensed version of the User Interface control on your machine by using the
Measurement Studio license fixer. You can also use this utility to fix a broken license.
Nauman

Charges associated with switching from Family to Individual Plans

Is there any kind of penalty charge for switching from a family plan to an individual plan when it is the secondary line that is being removed and the secondary lines' contract is complete?

skiibojosh wrote:
Is there any kind of penalty charge for switching from a family plan to an individual plan when it is the secondary line that is being removed and the secondary lines' contract is complete?
Thanks to the community members for your input. Hello skiibojosh, adding to what was stated, Are you just wishing to change your calling plan so each line remains with Verizon Wireless under their own individual plan You can always change your calling plan online without a penalty as it is not related to a customer agreement. I hope your line that completed the contract does remain with us. We desire to provide your line with best calling plan available. Here's a link that goes over the individual calling plans we currently offer. Additionally, there are great benefits with having a family share plan. However, depending upon your specific circumstances, if you desire to have both of lines on an individual plan, you could process a calling plan change online at My Verizon. It is suggested to change the calling plan effective on your next bill cycle to help avoid any prorated charges. If you need additional assistance with doing a calling plan change, send me a private message with your contact information.

Anyone using SecureDoc Full-Disk Encryption for Mac from WinMagic?

Currently I am using Mac OS X v10.5 on a MBP and want to upgrade to Snow Leopard. I use PGP full disk encryption.
I do not want to wait anymore for PGP v10 before I can upgrade to Snow Leopard. In my search for a replacement for PGP I found SecureDoc Full-Disk Encryption for Mac from WinMagic.
https://www.winmagic.com/products/full-disk-encryption-for-mac
They claim to be Snow Leopard compatible
https://www.winmagic.com/kw/download.php?url=/datasheets/securedocmac_brochure20090925a.pdf
I have two questions:
1) Does anyone have experience with SecureDoc Full-Disk Encryption for Mac from WinMagic?
2) Where can I buy one? PGP has a store where I ordered my copy of the software. But I can't find a store anywhere for SecureDoc. With some trouble I found a reseller in the Netherlands, but they don't reply to any questions.

I am currently testing a trial license from Checkpoint Full Disk Encryption.
http://www.checkpoint.com/products/datasecurity/pc/index.html
The company where I work is a Checkpoint reseller, and normally only has dealings with other companies, not end users. But we arranged a trial license and I can buy a single user license Checkpoint Full Disk Encryption if the test proves Checkpoint Full Disk Encryption is a good solution.
I created a bootable usb disk with Snow Lepoard on it. But I was unable to install FDE on it. After reboot I only get a blank screen, that's it. Probably it isn't supported to boot from a full disk encrypted removable drive, I can understand that.
I can't create a virtual Snow Leopard machine (legal reasons) to test it on. And all FDE solutions I found aren't compatible with Mac Server, which is a shame because you can virtualize Mac Server legally.
So now I am planning to change the hard-disk of my MBP this evening with another hard-disk to test Checkpoint FDE there. I don't want to upgrade my current Leopard installation to Snow Leopard only to discover it doesn't work as expected. I could of-course use my current installation and when it doesn't work rollback to a timemachine backup, but before that I have to decrypt my disk and uninstall PGP witch will take 1-2 days, and encrypt again when the test is over. Not pratical.
I will let you know how the test with Checkpoint Full Disk Encryption went!

Switch from classic to Extended Classic Scenario- Impact

Hello,
We are proposing to switch from Classic to Extended Classic Scenario.
We are on SRM_SERVER 550,Sp7 and SAP 4.7 backend.
We want to know if this is technically feasible to switch and have less/no impact on existing transactional data and master data.
Main concerns are: Existing open Shopping carts and PO's.
We are also modifying the WF by including buyer completion WF.
Will the carts created in classic scenario and 'awaiting approval' work similarly in ECS?
Can we copy old carts (created in classic scenario) into new ones in ECS?
Are there any other issues like the ones above which people have come across?
Is there any standard SAP material/Consulting note available
which gives some guidelines for switching scenarios?
Regards,
Srivatsan

Hello,
You can switch from the classic to the extended classic scenario by making the global settings in the IMG.
But it would be better if you can decide if only a particular set of categories need ECS.
If you wish to have both the scenarios,the deciding factor is the product category.
You can also activate a BADI for the control of ECS despite the above Global settings.
Reward if answer is helpful,
Thanks & Regards,
Nagarajan

Switching over from Extended Classic to Classic Scenario

Dear Experts,
If I need to switch back completely from Extended classic to Classic scenario do I need to activate any BADI?
Else I can just deactivate extended classic in SPRO.
Give your comments.
Regards,
B.N.Karthikeyan.

Hi Karthick,
Extended to classic
1. in SPRO - SRM Server - Cross application basic settings - Activate extended classic scenario
-- deactivate the check box.
2 . Cross application settings -- Define objects in backend system ( reservation, PR, PO )
Need to maintain this settings.. like for the sc which document should create in backend like PR/RES/PO.
3.In classic scenario no need to maintain IPC settings.. which require in Extended classic
4. Important thing is you should take care of number ranges..
Thanks
prasad.s

Switching from Classic to Extended Classic

Hello,
We are thinking of switching from classic scenario to extended classic as part of an upgrade from EBP 3.5 to SRM 5.0. Can anyone confirm whether it is possible, or whether we would have to re-implement SRM?
Any idea of how difficult it would be.
Thanks
AR

Hi,
Yes you can do it.
First you have to do the upgrade from 3.5 to 5.0
Then once your upgraded system is correctly working , you can change the configuration and switch from classic to ECS scenario.
Not a big deal
Kind regards,
Yann

IPod classic - switching from Windows to Mac

I have an iPod classic and am switching from Windows to Mac - what's the best way to retain my iPod library? Thanks!

If you just want to connect and use the iPod on the Mac then set it to manual update on your PC first. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
Using iPod with Multiple computers
Managing content manually on iPod and iPhone
Syncing Music to iPod
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
Macs can read Windows drives, the iPod shuffle for instance comes Windows formatted and is fully supported (you can update the firmware or restore it on the Mac and it retains it's Windows formatting). Other iPods (such as a 5th Generation or Classic for example) can be used in Windows format on a Mac but have to have the firmware updated or be restored on a PC to maintain the formatting. If however you don't intend using the iPod on a PC again you'll need to transfer your library from your PC so you can restore and reformat the iPod and keep it's firmware updated.
Once you are safely connected there are a few things you can do to restore your new iTunes directly from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
Senuti Mac Only (Currently only the beta version is iPod Touch & iPhone compatible)
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
TuneAid Mac only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPod Music Liberator Mac & Windows
iGadget Mac & Windows (iPhone and iPod Touch compatible)
Floola Mac & Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide

Scenario changes from Extended classic to Classic

Hi,
I would like to know what are the precaution required when we need to change the scenario from Extended classic to Classic?
Thanks

Hi
I dont know much about SRM addon ECC.
in general
SPRO
Activate Extended classic scenario - CONTROLS
define backend system for product category - check it up what you have given Target system.
The system is ECS or not ?
you can create a fresh thread .
br
Muthu

Partner functions OA and IP missing for Vendor in Extended classic PO

As part of current Classic scenario, we have maintained OA (Ordering Address) and PI (Invoicing Party) for a vendor in R/3. We have also maintained different ordering addresses for multiple plants in the Vendor master: Partner functions screen --> Alternative data.
I would like to acheive the same functionality in Extended Classic scenario. We have replicated the vendors from R/3 to SRM. After activating Extended Classic scenario, we see only VN as the partner function in R/3 PO.
Q1. How can we enable OA and PI partner functions in R/3 PO (Extended Classic) ?
Q2. How can we enable different ordering addresses for multiple plants in R/3 PO (Extended Classic) ?

Hi
Which SRM Server are you using ?
You need to maintain Partner Functions in the SRM Server - SPRO Transaction - Configuration Settings.
Here is the Path from SPRO Transaction ->
Supplier Relationship Management -> SRM Server -> Cros Application Basic-Settings -> Define Partner Functions
Maintain Similar entries as mentioned below.
Function Function Type Usage Description Abbreviation
00000016 0013 B2B Requester RQ
00000017 0007 B2B Contact Person CP
00000018 0011 B2B Bidder BI
00000019 0012 B2B Vendor VD
00000020 0002 B2B Goods Recipient GR
00000025 0014 B2B Portal Provider PP
00000026 0008 B2B Responsible Employee RE
00000027 0017 B2B Ship-To Address DP
00000028 0003 B2B Invoice Recipient IR
00000029 0015 B2B Invoicing Party IP
00000030 0018 B2B Ship-From Address SP
00000034 0002 B2B Plant PLNT
00000038 0001 B2B Sold-to Party ORDR
00000039 0026 B2B Preferred Vendor PRVD
00000051 0019 B2B Purch. Org. Auth. For Release AREL
00000074 0025 B2B Service Agent SERV
00000075 0031 B2B Location LOCA
00000097 0034 B2B Invoicing Party Employee IPEm
Hope this will definitely help.
More details ->
For 1), see these links below ->
Partner function missing in backend PO
Re: Error in transmission while PO cration
"Multiple" partner data at PO header
Partner functions in plan driven MM-SUS
Re: Partner function not found
Number range for business partner
Re: Problem with BP. Assignment: Business partner person to user not unique
Error in creation of Employee for Business Partner
Re: enter exactly one partner of type vendor
Re: Business partner as Vendor and Invoicing Party
Partner functions in EBP for extended Classic Scenario
Classic Scenario PO has multiple OA Partner Functions for Vendor
For 2), see the pointers ->
There is an article written by Jason Didday at www.saptips.com entitled "mySAP SRM and SAP R/3 Partner Functions: Supporting OAs, VNs and IPs" that you may find useful.
In SRM, there is no standard relation betwwen plant and vendor master data.
You can use BBP_GET_VMDATA_CF BADI to add backend data in SRM while using BBPGETVD and BBPUPDVD transactions.
Replication of Ordering Address from R/3 to SRM
Re: Adding Partner Function to R/3 PO from SRM in Classic using BADI
Partner function Payee in SRM
Adding Partner Function to R/3 PO from SRM in Classic using BADI
Do let me know.
Regards
- Atul

Why does my font/text change when I switch from Classic 3D to Ray traced 3D in After Effects?

My font/text changes when I switch from Classic 3D to Ray traced 3D. Why is it doing this? Also, I cant get the font/txt to look the same after I switch from Classic to Ray traced. How can I get it to look the same?

I am pretty new to After Effects so I hope it's not my inexperience that's causing the problem. (It probably is)
I just updated to the most current version of AE.
I am on a mac pro late 2013 12GB 6 core. Running OSX 10.9.4
Okay so after looking at it a little closer, I think the color is what mostly changes. The first screenshot is the what the text look like with Classic 3D and the second screenshot is what it looks like after I change it to Ray traced 3D. Also under the "Mode" section..the pull down that says "Normal" disappears. I'm wondering why the font color is changing?

Extended classic to Classic

Hi,
When would a switch from ECS to Classic be justifiable?
Thanks.

Dear srm_tech,
There can be many reasons. From business prospective, if the client wants to creates a reservation out of shopping cart in self service procurement scenario for the items that are already available in the stock, it is supported by classic scenario only and can be a good reason for switching to classic from extended classic scenario.
Secondly, for a particular set of suppliers, you have well defined EDI interface and you want to continue to use them. Then, you can think of using classic scenario to use existing communicaltion channels.
I hope, it helps you.
Thanks and regards,
Ranjan

Import phonebook from E50 to 3120 Classic

Dear fellows, I've just exchanged from E50 to 3120 Classic phone. Before returning E50 I backed up my phonebook in my 1Gb memory card, and each contact appeared as a vcf file. Then, I put the memory card into my 3120, and the files are there, but 3120 does not recognize the vcf files as phonebook entries.
How do I solve this? What is the file type that 3120 works with and how can I convert vcf files into this?
I really appreciate your help, since I have 200+ contacts which I do not intend to type one by one into my new phone.
Thanks a lot!
Cheers,
Rodrigo
Message Edited by celandine on 11-May-2009 07:26 PM

well the fundamental issue is that you have moved from a business oriented device to a very basic phone, e50 is a s60 phone 3120 is a s40 phone they work on different platforms therefore compatability is an issue here. did you try to copy your contacts to the sim card while using the e50 and then just swap the sim card to your new phone? a new sim card - under 2 years old or so should have capacity for up to 250 contacts. ifyou say that you have only about 200 you should be able to do so without any issues.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Impacts for switching from Extended Classic to Classic in production

Similar Messages

Maybe you are looking for