Impacts of important component change in BoM on VARIANCES?

Hello dears,
will anybody please help me?
I have to change the principal component for a lot of materials.
I premise that we wouldn’t change the name of the material produced.
What kind of impact this will have in Product Cost Controlling and overall on variances?
Thanks in advance,
Best regards.
Juan

Dear Juan,
In your case if the change is only for one HALB item(change) for only one BOM
means,easily you can do a cost rollup & released cost estimate using T code
CK40N.But this has to be done by the CO consultant and they can observe the
changes properly.But on the other side if you have carried out mass changes
using CS20,then it takes much time to clear the Finance issues.
The impact will be seen in variances,so kindly take the help from your FI-CO
consultant & proceed.
Regards
Mangal

Similar Messages

  • Impacts of important component change in BoM on CO-PC

    Hello dears,
    will anybody please help me?
    I have to change the principal component for a lot of materials.
    I premise that we wouldn’t change the name of the material produced.
    What kind of impact this will have in Product Cost Controlling?
    Thanks in advance,
    Best regards.
    Juan

    Dear Juan,
    In your case if the change is only for one HALB item(change) for only one BOM
    means,easily you can do a cost rollup & released cost estimate using T code
    CK40N.But this has to be done by the CO consultant and they can observe the
    changes properly.But on the other side if you have carried out mass changes
    using CS20,then it takes much time to clear the Finance issues.
    The impact will be seen in variances,so kindly take the help from your FI-CO
    consultant & proceed.
    Regards
    Mangal

  • Impacts of important component change in BoM on BW

    Hello dears,
    will anybody please help me?
    I have to change the principal component for a lot of materials.
    I premise that we wouldn’t change the name of the material produced.
    I premise that we wouldn’t change the name of the material father.
    What kind of impacts this will have on BW considering that we reunite the report by this component?
    Thanks in advance,
    Best regards.
    Juan

    Dear Juan,
    In your case if the change is only for one HALB item(change) for only one BOM
    means,easily you can do a cost rollup & released cost estimate using T code
    CK40N.But this has to be done by the CO consultant and they can observe the
    changes properly.But on the other side if you have carried out mass changes
    using CS20,then it takes much time to clear the Finance issues.
    The impact will be seen in variances,so kindly take the help from your FI-CO
    consultant & proceed.
    Regards
    Mangal

  • Mass component change in BOM

    hi
    i want to  mass change some components in BOM. For example in the BOM i have 10 components. Now i want to change 5 components in the BOM
    I have around 500 FG How to do that? Is it possible in LSMW?. or CS20?

    It is better to go for getting a BDC developed for all the mass changes in the BOM.
    Using CS20 you can only change a single component and replace with a new material. I think BDC is the best alternative.
    Hope this helps you.

  • Mass change in component Scrap % in BOM

    Hi Guru,
    Can someone explain me the process of mass change in component scrap % in BOM ? I have to make zero coponent scrap % in BOM for all materials.

    Dear Vikash,
    Check with t-code CEWB
    for this you need to define work area in OP77
    Regards
    Madhu

  • BOM Component changes when changes done in VC

    Hi All,
    When ever we are changing the characteristic values in Variant configuration, it result the component changes in the BOM.
    Please any body let us know how to find the what are the component changes in the BOM when we change any characteristic value in VC. Is there any FM or it will store in any table?
    Regards,
    Vasu.

    Sure Vasu,
    Find explanation on  this as below :
    BOM components are selected by making use of a special type of dependency called SELCETION CONDITIONS.
    If you want to find which BOM components will be selected on selecting which characteristic value, then follow the below given procedure :
    1. goto T.Code CS03.
    2.enter BOM header name , plant etc. and press enter.
    3. now you are in inside BOM.
    4. Select any BOM component for which you want to check when will it be selected during configuration.
    5. then, in top menu , choose  Extra --> Object Dependencies --> Assignments
    6. It will display all Object Dependencies assigned to that BOM component.
    7. Select the Dependency with type Selection Condition.
    8. Click on Dependency editor.
    9. It will show you the Dependency code
    10. when the condition as per this code is satisfied, the component is selected during configuration.
    Please revert back if you have any doubt.
    Reward Points.
    Regards,
    Gaurav Raghav.

  • Component change in respective BOM

    Hi All,
    I have situation, one raw material used in 10 diff BOMs, but now i want to replace this component by other,
    Is there is any mass transaction to amke this replacement effective.
    Thanks
    Regards

    Hi,
    Yuo can try here CS20 mass changes in BOM  .Where you can change material ..
    Just try it.
    Regards
    SANIL

  • BAPI to change a BOM copmonent

    Hi gurus,
        I am using a BAPI named by BAPI_BOM_UPLOAD_SAVE.
    With this BAPI i could create a new BOM. But i am not able to change a specific component in the BOM. Is there any indicators to imply the change or is there any BAPI to change the existing BOM component without having the whole structure to be used.
    Regards,
    Nehru.

    FU CSAP_MAT_BOM_MAINTAIN
    Functionality
    You can use function module CSAP_MAT_BOM_MAINTAIN to process simple material BOMs.
    This function module is intended mainly as a tool for changing BOMs. However, it can also be used to create BOMs.
    If you only want to create BOMs, use function module CSAP_MAT_BOM_CREATE.
    To change BOMs, you can also use the following function modules:
    CSAP_MAT_BOM_OPEN
    CSAP_BOM_ITEM_MAINTAIN
    CSAP_MAT_BOM_CLOSE
    For more information and examples, see the documentation of the individual function modules.
    Restrictions:
    To date, you can only process one alternative or variant with this function module. This means that, if you do not enter an alternative for function module CSAP_MAT_BOM_MAINTAIN, the system assumes that you want to process alternative 01.
    To date, changes to the BOM header are not yet supported.
    Please note:
    The item to be changed can be identified in two ways:
    via the fields item category, item number, sort string, and object (depending on the item category, this can be material, document data, or class data).
    The names of these identifying fields begin with 'ID_' and are contained in structure CSIDENT_02. Structure CSIDENT_02 is part of structure STPO_API03.
    You can use any combination of these fields to identify the item, provided the fields identify the item uniquely. Otherwise you see the error message 'Item cannot be identified uniquely'.
    via the BOM node and BOM item counter
    These fields are only known to the system if you have read the BOM before. If you identify the item in this way, you should therefore use function modules CSAP_MAT_BOM_OPEN, CSAP_BOM_ITEM_MAINTAIN, or CSAP_MAT_BOM_CLOSE to change the BOM.
    If the error message 'Item cannot be changed' appears in the log, this can be for the following reasons:
    - The item is not valid on the valid-from date - it becomes valid at a
      later date.
    - The item has already been changed on the same valid-from date
      with a different change number.
    You cannot change the item category of an item that exists already in the system.
    To delete an item, you must identify it as described above for the change function and set the deletion indicator.
    FL_BOM_CREATE (default ' ')
    If you set this indicator to 'X', the system creates a new BOM if it cannot find the BOM you want to change and there is no other error.
    Items can only be created if sufficient data exists to do this.
    The system ignores items with a deletion indicator when creating a BOM.
    FL_NEW_ITEM (default ' ')
    If you set this indicator to 'X', the system creates a new item if it cannot find the item with the identification entered.
    The system ignores items with a deletion indicator.
    Example
    *---- BOM header data structure
    data: begin of tstk2.
              include structure stko_api02.
    data: end of tstk2.
    *---- BOM items table
    data: begin of tstp3 occurs 0.
              include structure stpo_api03.
    data: end of tstp3.
    *---- Object dependencies table
    *     Basis data
    data: begin of tdep2_data occurs 0.
             include structure dep_data.
    data: end of tdep2_data.
    *     Description
    data: begin of tdep2_descr occurs 0.
             include structure dep_descr.
    data: end of tdep2_descr.
    *     Source
    data: begin of tdep2_source occurs 0.
             include structure dep_source.
    data: end of tdep2_source.
    *     Sequence
    data: begin of tdep2_order occurs 0.
             include structure dep_order.
    data: end of tdep2_order.
    *     Documentation
    data: begin of tdep2_doc occurs 0.
             include structure dep_doc.
    data: end of tdep2_doc.
    data: flg_warning like capiflag-warning.
    *- Initialize database log
       call function 'CALO_INIT_API'
            exceptions
                 log_object_not_found     = 1
                 log_sub_object_not_found = 2
                 other_error              = 3
                 others                   = 4.
    *- Fill item data
    *  Exception: items that can be identified uniquely via their item
    *             number
    *  1. Item 0010: change quantity
       clear tstp3.
       tstp3-id_item_no = '0010'.                    "Item identification
       tstp3-comp_qty   = '5.000'.
       append tstp3.
    *  2. Item 0020: delete
       clear tstp3.
       tstp3-id_item_no = '0020'.                    "Item identification.
       tstp3-fldelete   = 'X'.
       append tstp3.
    *- 3. New item 0030 (stock material)
    *  For new items, the ID_ fields, BOM nodes, and BOM item counters are
    *  initial unless they use
    *  FLG_NEW_ITEM
       clear tstp3.
       tstp3-item_no    = '0030'.
       tstp3-component  = 'MAT200'.
       tstp3-item_categ = 'L'.
       tstp3-comp_qty   = '1'.
       tstp3-rel_prod   = 'X'.
       tstp3-sortstring = 'A1'.
       append tstp3.
    *  3. Item 0040: change component
       clear tstp3.
       tstp3-id_item_no = '0040'.                    "Item identification
       tstp3-component  = 'MAT500'.
       append tstp3.
    *- Change BOM
       call function 'CSAP_MAT_BOM_MAINTAIN'
            exporting
                 material   = 'MAT100'
                 plant      = '0001'
                 bom_usage  = '1'
                 valid_from = '14.10.1996'
                 fl_bom_create = ' '
                 fl_new_item = ' '
                 i_stko  = tstko
            importing
                 fl_warning = flg_warning
                 o_stko     = tstk2
            tables
                 t_stpo       = tstp3
            exceptions
                 others  = 1.
       if sy-subrc eq 1.
    *---- Error
    *     Please see log
       endif.
       if flg_warning eq 'X'.
    *---- Please see log for information, warning messages, and success
    *     messages.
       Endif.
    Parameters
    MATERIAL
    PLANT
    BOM_USAGE
    ALTERNATIVE
    VALID_FROM
    CHANGE_NO
    REVISION_LEVEL
    I_STKO
    FL_NO_CHANGE_DOC
    FL_COMMIT_AND_WAIT
    FL_CAD
    FL_BOM_CREATE
    FL_NEW_ITEM
    FL_COMPLETE
    FL_DEFAULT_VALUES
    FL_IDENTIFY_BY_GUID
    FL_WARNING
    O_STKO
    T_STPO
    T_DEP_DATA
    T_DEP_DESCR
    T_DEP_ORDER
    T_DEP_SOURCE
    T_DEP_DOC
    T_DOC_LINK
    T_DMU_TMX
    T_LTX_LINE
    T_STPU
    Exceptions
    ERROR
    Function Group
    CSAP

  • Mass change in BOM - field "Relevant to sales"

    Hi All,
    How to do Mass change in BOM for the field "Relevant to sales" ?
    Thanks.
    Marianna

    Hi,
    Need to use CS02 recording in such a way that you can change every item in a particular BOM.
    e.g. First get into HEader Material BOM (CS02), once you've General Item Overview screen, do NOT directly go to item details of any item.... first click on tab-'Position', enter either Item Number or Component or both and then go to item details to change the relevancy indicator. Once changed for a particular item, save the BOM & come out of it. Then try for next item & so on....
    Again this is my initial thought, you need to try out few recording options like this and then chose the most suitable one. Take help from ABAP expert if any available.
    Off-course, initiallly it would take time to set-up LSMW but later on just need to create a data-file & do the mass changes.
    Hope it will help.
    Regards,
    Anup

  • Add component to 200+ BOMs

    Hi,
             I want to add a single component to over 200 BOMs. Is there any mass change transaction ? I tried the CEWB but cant seem to figure out how to use it to add a single component to many BOMs.
    Thanks
    GS

    >
    GS wrote:
    > ok dudes, I am not getting a firm answer still.
    >
    > Can CEWB be used or not ? Whether LSMW or BDC is better is a later discussion.
    >
    > Also to use CS20 I need to specify a common component which would need to be replaced by this new component. I DO NOT have a common component in the 200+ BOMs. So where do I put the list of 200+BOMs to be updated ?
    >
    > Thanks
    > GS
    GS,
    1. CEWB cannot be used to mass add a Components to Multiple Material BOMS.
    CS20 if none of the BOM components are common for all 200, may be you can try to group them based on common materials and then try to run CS20 multiple times to complete your task.
    Final option is as described earlier LSMW and BDC.
    Regards,
    Prasobh

  • Delete a component in the BOM

    Hi,
    I have created a BOM for SD (one material with some component)
    Do I have a choice to delete one component for one day in the BOM (if this component is insufficient  or too late GR)  without change my BOM for the future days?
    where can I do it in th eBOM or in the sale order.
    Thanks

    Dear,
    I hope the situation is you have sales order and for that sales order you have a production order
    Decide in which in production order you donot want to withdrew the component and delete that component in production order. When you confirm that component will not be issued.
    If you donot want to delte in Production order, then during confirmation itself...goto goods movement screen and delete atht conmponent and save the confirmation.
    pl conme back if required

  • BAPI to change a BOM

    Hi friends,
             Can anybody let me to know how to change a bom component in a existing BOM with the use of BAPI. Say for example i am having a bom structure for A. I want to change a line item named A1 which is a component without having the whole BOM structure.
    Regards,
    Sankar.

    Hi Sankar,
    Check:
    CS_BOM_EXPL_MAT_V2
    Check these :
    BAPI_MATERIAL_BOM_GROUP_CREATE -- Creation of a material BOM group
    BAPI_MAT_BOM_EXISTENCE_CHECK --Check whether BOM for material exists
    Hope this helps you.
    Regards,
    Chandra Sekhar

  • Sub-con PO - Change in BOM

    Hi All,
    I have created a sub-con PO and after that some changes are required in the BOM and the same are done.  How to re-explode the BOM in the same PO and what will be the impact of the same on MRP?
    Thanks in advance
    Radha Krishna Madineedi

    Hi,
    I created a PO > BOM was exploded > after I changed the BOM (validity 'from' in the past) > the BOM in PO remaines the same and I cannot change it.
    So, you have to do it manually I' afraid...(on 'material' tab of your PO item)...because we are speaking about an already issued PO...
    Just my opinion I'm not sure...
    BR
    Csaba

  • Want to track changes in BOM

    Hi,
    I need to check what change has been done in BOM and when the change has been done.
    Suppose, I have added or deleted a component in BOM today then i want to check that yesterday what were components & today what is there?
    Is it possible without ECM?
    Regards,
    Samir Wadajkar

    Hi,
    You can track changes in BOM without ECM.
    For one individual BOM you see the Display change document.
    Display change documents. You have following options.
    Document overview
    Document Number
    Date & Time
    User who made the changes
    Object ID
    From this list you can display individule change document. To do this, place a cursor on a line containing the document you require. Or else you see Display Document Full.
    You see all the changes document, listed one after the other.
    For more, please revert.
    Best Regards,
    Vijay Mankar

  • Component changes when changes done in VC

    Hi All,
    When ever we are changing the characteristic values in Variant configuration, it result the component changes in the BOM.
    Please any body let us know how to find the what are the component changes in the BOM when we change any characteristic value in VC. Is there any FM or it will store in any table?
    Regards,
    Vasu.

    Hi Anji,
    Thanks for your reply.
    The above FMs are returning only the characteristic changes. But i need to to find the Changed Components in BOM if the characteristic value changes. Plese give any other FM if you are having.
    Regards,
    Vasu.

Maybe you are looking for