Impatient store question - how long should an order remain on "Processing Items"

Not sure if this is the right forum for this q, but here goes:
So placed an order for my first Mac Wednesday AM. I opted for the hires antiglare screen so it's a custom build with a ship time of 1-3 days. I'm past the 48hr mark and it still shows as "Processing Items" where I can make changes to the order - so I assume they haven't started build it yet? How long is typical for it to remain in this status before it ships? I'm getting anxious!
Thanks in advance for any insights!
Matt

You were told 1 - 3 days. 48 hours is 2 days. So be patient. It will ship when it ships. Then you will be able to track it as it travels the world.

Similar Messages

How long should I let the extracting process run? It has been over 6 hours (Photoshop Elements.

How long should I let the extracting process run? It has been over 6 hours (Photoshop Elements). I have already received Disk Image Error - 4960. System will not let me attempt another download as message that download is in queue is received??

Cancel it, try this:
Direct Download Links for Adobe Software
Use Winzip to extract the 7z file.
Mylenium

How long i need to wait for processing item

I am buying an Iphone 5 and my order says PROCESSING Items. I am going to south america and I am afraid with the delay

The Cloud allows install on both Windows and Mac... what program and version do you have?

Battery question- How long should they last

I got a 15 inch MBP in August 2011. This is my first Apple laptop. I would sure appreciate some help on this one.
When I first got the computer, I would charge it and use it on and off of the AC. I read about calibrating the battery and did it once about a month ago. Then I did it a few days ago. Since I calibrated the second time, it seems the battery runs out very fast. For example, this morning the battery was fully charged. I used it for less than 10 minutes. The battery percentage read 98 I believe. I put the computer to sleep. I think about 5 hours or so latter I went to check the computer and it had gone to sleep with a depleted battery. It seems to me that going from 98% to 0 in sleep mode is not good.
Before I calibrated it seemed to do fine.
Please help me and give me any suggestions you can.
Thank you very much.

Forestman wrote:
I got a 15 inch MBP in August 2011. This is my first Apple laptop. I would sure appreciate some help on this one.
When I first got the computer, I would charge it and use it on and off of the AC. I read about calibrating the battery and did it once about a month ago. Then I did it a few days ago. Since I calibrated the second time, it seems the battery runs out very fast.
MBP's made after 2009 have pre calibrated batteries and do not need to be calibrated: http://support.apple.com/kb/HT1490
The battery should last 1,000 cycles before it reaches 80% of its original capacity. Read this:http://www.apple.com/batteries/notebooks.html

How long should Satellite A215-s7422 operate?

I have one simple (not for me) question: How long should the notebook operate???

Hi there,
your question is a little bit confusing. Why? :)
Ok, maybe I try to thinkabout what you mean and I guess you mean how long the machine should be ON till shutting it down.
You can leave the machine for more than 1year/4weeks/7days/24hours ON which means you can operate the machine till I-dont-know because it does not matter how long your machine is operating. I have a notebook which runs 24/7 as a server without problems.
Greets

How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?

Guys,
How long should it take for an answer on a question Cisco agree's is a good question and agree to work on it?
I have an RVS-4000 and it sends me error message by email on errors. Yet I do not have any documentation on what these error messages mean. I asked these question last May and still have not received any answers.
I was told it had been forwarded to a engineer for creatation of this documentation in May. Here we are...
Do any of you agree we need this type of documentation on our Routers? I think it should have been created before these where sold and included with these Routers. Maybe if we all voted on it. Then It might still happen?
Please add you reply's to this. As it might help to get things moving...
Bruce

I created a track on my computer and added it to iTunes
iCloud only syncs and stores purchases from the iTunes Store.
"With iCloud, the music, movies, TV shows, and other iTunes content you’ve purchased are available to download to your devices".
Apple - iCloud - All your content on all your devices.

HT201376 I've erased and formatted the hard drive accordingly in order to reinstall OS X. everything went fine until about half way through the install. it just seems to stop. how long should this take? should i do something else to speed it up?

I've erased and formatted the hard drive accordingly in order to reinstall OS X. everything went fine until about half way through the install. it just seems to stop. how long should this take? should i do something else to speed it up?

About all you can do is wait until it finishes or you get an error message.

How long should the upgrade from 10.4.11 to 10.6.3 take?

Subject line asks my question. How long should I expect the upgrade to take, using the Snow Leopard DVD I just purchased from Apple Store?
Thanks
Paul

20-30 minutes is the norm.

Hardware test extended -- how long should it take?

Running an AHT on my iMac 21.5 Late 2009 (HD is about 300GB w/ 12GB RAM), and initial test was quick and no issues found. Decided to then do extended test (just to be safe & curious to see what difference there was), but 2hrs in it was still showing it had a long way to go before finishing.
Questions:
Would extended AHT tests reveal anything serious the basic AHT does not test?
How long should an extended AHT take? iMac seemed very hot at the time of the testing
I understand Apple Stores will do free 15min test; is the AHT basically same test store personnel would run?Without getting into detail (too convoluted to describe here as no real pattern to my issues w/ Imac), I basically want peace-of-mind that issues I'm having from difficulty ejecting volumes (system says disk is in use when doesn't appear to me it is) to Apple apps (iTunes, Safari, etc.) taking very long to open ever since I installed Mountain Lion. I'm going through separate tracks to determine if issues are software-related (not hardware) but while I'm at it, I'd also like to safely rule out HW problem(s).
Thanks in advance.

1. The extended test looks for problems slowly, so it may find problems that a basic test can't find.
2. The extended test, depending on your memory, takes an hour or more, and it will increase if you have more memory. It's normal that you feel your computer hot during test, so don't worry.
3. Apple Hardware Test is different than that test. The test that Apple can do is more exact and it might detect problems you can't find in Apple Hardware Test. For example, problems with the graphic card or similar (Apple Hardware Test doesn't detect some problems)

How long should it take to get my old number back ...

I moved house 4 working days ago. New house is on same exchange as old, sa asked to keep my old number.
The order is apparently in two parts:
1) Cease line at old address - done on day "1"
2) Connect new line at new address - engineers "cancelled" on Day 1. No reasons given on the order and I wasn't contacted to tell me all had gone to a ball of chalk..... I'd have been none the wiser had I not bothered to check.
Over the weekend I spoke with various people, leading to a new order for a new line, to be installed on day "4" (today). It wasn't possible to pull my old number out of the allocatable pool (presumably (good!) it was still allocated to the cancelled order?) The engineers were "asked" in a note on the order to move my old number back onto the line.
This line is now up and running on a temporary number.
As my O2 broadband reconnection is waiting till I have a line with a stable number on it and I am keen to get it back asap, how long should I have to wait? Is there anything that could happen that will sabotage getting my number back and what should I do to prevent this?
Jon

I am with you on this and am very interested also as to the answer.
I was originally with BT, then moved to Sky as I wanted Sky TV, and thought it best to get the complete package. They never once mentioned, "oh by the way if you move home you lose your number". I think they should highlight this, and then watch there customer base drop.
Anyways, that aside. I have decided to come back to BT, and BT have created a new number at my new address, and when the line is activated I have to call to get a renumber and hope that the number I want hasn't been taken.
i presume by law Sky have to put the number back into the pool, and therefore should be able to get BT to get it back. Fingers crossed.
What reasons could there be that they cant get the number back.

How long should it take iOS 6.1 to load on my iPhone?

How long should it take iOS 6.1 to load on my iPhone? It's been 3 hours and it is stuck in the same part of the download.

I now have the new phone. The order number is still not appearing on My 02.
It turns out that when I bought the phone, it was assigned a new sim card/telephone number. Now there are two phone numbers on my o2 account - the one I use, the one that came with the new phone.
The order number is appearing under the new sim card's phone number, not the one I intend to use.
Hopefully, O2'll be able to update the order and link it to the telephone number I use. It's not a major problem (at all) but I'd rather have it connected to the number I use than a random number that came with the phone.

DFSR - This member is waiting for initial replication for replicated folder SYSVOL Share - How long should it take?

Yesterday we were forced to perform a non-authoritative sync of the SYSVOL folder as replication had stopped because one of the DCs had been disconnected from it's replication partner for more than 60 days (caused by a unexpected shutdown and we did not
pick up on the fact replication had stopped until now).
I performed the non-authoritative sync of the SYSVOL folder and now the folder is in state 2
ReplicatedFolderName ReplicationGroupName State
SYSVOL Share Domain System Volume 2
and has been for more than 12 hours. The DFS replication health report, reports "This member is waiting for initial replication for replicated folder SYSVOL Share".
How long should it take and is there anyway to force it so that replication can resume?

I'm fairly sure it's not tombstoned. Here is the DCDIAG output:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = RC-CURDC-02
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\RC-CURDC-02
Starting test: Connectivity
......................... RC-CURDC-02 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\RC-CURDC-02
Starting test: Advertising
......................... RC-CURDC-02 passed test Advertising
Starting test: FrsEvent
......................... RC-CURDC-02 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... RC-CURDC-02 passed test DFSREvent
Starting test: SysVolCheck
......................... RC-CURDC-02 passed test SysVolCheck
Starting test: KccEvent
......................... RC-CURDC-02 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... RC-CURDC-02 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... RC-CURDC-02 passed test MachineAccount
Starting test: NCSecDesc
......................... RC-CURDC-02 passed test NCSecDesc
Starting test: NetLogons
......................... RC-CURDC-02 passed test NetLogons
Starting test: ObjectsReplicated
......................... RC-CURDC-02 passed test ObjectsReplicated
Starting test: Replications
......................... RC-CURDC-02 passed test Replications
Starting test: RidManager
......................... RC-CURDC-02 passed test RidManager
Starting test: Services
......................... RC-CURDC-02 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003FC
Time Generated: 06/12/2014 18:26:05
Event String:
Scope, 10.59.96.64, is 83 percent full with only 7 IP addresses remaining.
A warning event occurred. EventID: 0x000003FC
Time Generated: 06/12/2014 18:26:05
Event String:
Scope, 10.59.98.0, is 95 percent full with only 5 IP addresses remaining.
A warning event occurred. EventID: 0x00000560
Time Generated: 06/12/2014 18:26:05
Event String:
IP address range of scope 10.59.96.64 is 83 percent full with only 7 IP addresses available.
A warning event occurred. EventID: 0x00000560
Time Generated: 06/12/2014 18:26:05
Event String:
IP address range of scope 10.59.98.0 is 95 percent full with only 5 IP addresses available.
A warning event occurred. EventID: 0x000016AF
Time Generated: 06/12/2014 18:39:43
Event String:
During the past 4.23 hours there have been 95 connections to this Domain Controller from client machines whose IP addresses don't map to any of the existing sites in the enterprise. Those clients, therefore, have undefined
sites and may connect to any Domain Controller including those that are in far distant locations from the clients. A client's site is determined by the mapping of its subnet to one of the existing sites. To move the above clients to one of the sites, please
consider creating subnet object(s) covering the above IP addresses with mapping to one of the existing sites. The names and IP addresses of the clients in question have been logged on this computer in the following log file '%SystemRoot%\debug\netlogon.log'
and, potentially, in the log file '%SystemRoot%\debug\netlogon.bak' created if the former log becomes full. The log(s) may contain additional unrelated debugging information. To filter out the needed information, please search for lines which contain text
'NO_CLIENT_SITE:'. The first word after this string is the client name and the second word is the client IP address. The maximum size of the log(s) is controlled by the following registry DWORD value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize';
the default is 20000000 bytes. The current maximum size is 20000000 bytes. To set a different maximum size, create the above registry value and set the desired maximum size in bytes.
......................... RC-CURDC-02 passed test SystemLog
Starting test: VerifyReferences
......................... RC-CURDC-02 passed test VerifyReferences
Running partition tests on : curriculum
Starting test: CheckSDRefDom
......................... curriculum passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... curriculum passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running enterprise tests on : riddlesdown.local
Starting test: LocatorCheck
......................... riddlesdown.local passed test LocatorCheck
Starting test: Intersite
......................... riddlesdown.local passed test Intersite
Eveything is passing, except for the bits about the SystemLog and DFRS, all seems good to me.
Event 2213 is in the logs. I will look and changing the MaxOfflineTimeInDays and see if that gets it going.

About how long should it take to burn slideshow onto a DVD w/ duo core iMac

I posted this under in the general forum and rec'd no responses. Perhaps I should have started here....
Q. About how long should I expect it to take my iMac to convert, then Burn an iPhoto slideshow (comprised of 130 338kb pictures) onto a DVD? I've done this twice (from iPhote, going to Share, then clicking "DVD") and each time it has worked perfectly. However, it seems to take about an hour or more to complete. Is this normal/ expected?? Please understand that this is my first Mac and I've never had a PC w/ a DVD burner, so I'm not sure what to expect. ..I tried running a search for the question but came up empty.
Thanks!

I am also doing one right now and it is taking awhile.
The images are very large though, 1 mb each.
They look great, but the transfer from iPhoto to iDvd is taking forever.
Is when your system lags?
I am topped out with 2gigs of ram and 2.0 ghz intell chip.
iMac CD 20", 2.0 GhZ, 2.0 Gb ram Mac OS X (10.4.5)

How long should it take too boot from cd?

Hello. I bought a new 1TB hard drive for my mid 2010 MacBook Pro and I wanted to get it up and running. It's currently in the computer installed, I've inserted my installation disk, but how long should it take for it to load? I tried letting it sit and load for about 2 hours but I got impatient and shut it off. I'm going to try to see if I see any changes if I let it sit over night. Right now, the grey apple is on the screen with the spinning gradient pinwheel. But on average, how long should it take? I also read that I should have my macbook plugged to my internet connection, so that's on there as well.

How were you booting from the DVD drive? Did you hold down the C key at startup? Try holding down the Option key to get a Boot Selection screen, Wait 30+ seconds for the DVD disc to show up and select it to boot from.
If when using the Option key you never get the install DVD disc showing up or after selecting it to boot from the system just sits there for any length of time, over 2 minutes, then your Supredrive is not reading it. This is a very common problem with the Supredrives. They seem to work for some things and not for others or they just fail out of the blue.
I suggest you go out and buy any brand External DVD drive that connect by USB port (That is Except the Apple USB External Superdrive as they won'r work on your model Mac notebook) and try booting the install DVD from that external DVD drive.
Abcdefghijayjay wrote:
I was booting directly from the DVD but it didn't even go through. I let it sit over night thinking it would finish.

I have 8kb on a vcard. How long should it take to import that vcard into the icloud

I am trying to load my vcard to the icloud website. it says that it is importing but how long should that take? the vcard is 8kb in size

unless you have a huge mail store that is way to long.
Might be a corrupt PST file. The import locks when one of those is encountered.

Impatient store question - how long should an order remain on "Processing Items"

Similar Messages

Maybe you are looking for